src/Kconfig

##
## This file is part of the coreboot project.
##
## Copyright (C) 2012 Alexandru Gagniuc <mr.nuke.me@gmail.com>
## Copyright (C) 2009-2010 coresystems GmbH
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##

mainmenu "coreboot configuration"

menu "General setup"

config EXPERT
	bool "Expert mode"
	help
	  This allows you to select certain advanced configuration options.

	  Warning: Only enable this option if you really know what you are
	  doing! You have been warned!

config LOCALVERSION
	string "Local version string"
	help
	  Append an extra string to the end of the coreboot version.

	  This can be useful if, for instance, you want to append the
	  respective board's hostname or some other identifying string to
	  the coreboot version number, so that you can easily distinguish
	  boot logs of different boards from each other.

config CBFS_PREFIX
	string "CBFS prefix to use"
	default "fallback"
	help
	  Select the prefix to all files put into the image. It's "fallback"
	  by default, "normal" is a common alternative.

config COMMON_CBFS_SPI_WRAPPER
	bool
	default n
	depends on SPI_FLASH
	depends on !ARCH_X86
	help
	 Use common wrapper to interface CBFS to SPI bootrom.

choice
	prompt "Compiler to use"
	default COMPILER_GCC
	help
	  This option allows you to select the compiler used for building
	  coreboot.

config COMPILER_GCC
	bool "GCC"
	help
	  Use the GNU Compiler Collection (GCC) to build coreboot.

	  For details see http://gcc.gnu.org.

config COMPILER_LLVM_CLANG
	bool "LLVM/clang"
	help
	  Use LLVM/clang to build coreboot.

	  For details see http://clang.llvm.org.

endchoice

config ANY_TOOLCHAIN
	bool "Allow building with any toolchain"
	default n
	depends on COMPILER_GCC
	help
	  Many toolchains break when building coreboot since it uses quite
	  unusual linker features. Unless developers explicitely request it,
	  we'll have to assume that they use their distro compiler by mistake.
	  Make sure that using patched compilers is a conscious decision.

config CCACHE
	bool "Use ccache to speed up (re)compilation"
	default n
	help
	  Enables the use of ccache for faster builds.

	  Requires the ccache utility in your system $PATH.

	  For details see https://ccache.samba.org.

config SCONFIG_GENPARSER
	bool "Generate SCONFIG parser using flex and bison"
	default n
	depends on EXPERT
	help
	  Enable this option if you are working on the sconfig device tree
	  parser and made changes to sconfig.l and sconfig.y.

	  Otherwise, say N.

config USE_OPTION_TABLE
	bool "Use CMOS for configuration values"
	default n
	depends on HAVE_OPTION_TABLE
	help
	  Enable this option if coreboot shall read options from the "CMOS"
	  NVRAM instead of using hard-coded values.

config STATIC_OPTION_TABLE
	bool "Load default configuration values into CMOS on each boot"
	default n
	depends on USE_OPTION_TABLE
	help
	  Enable this option to reset "CMOS" NVRAM values to default on
	  every boot.  Use this if you want the NVRAM configuration to
	  never be modified from its default values.

config COMPRESS_RAMSTAGE
	bool "Compress ramstage with LZMA"
	default y
	help
	  Compress ramstage to save memory in the flash image. Note
	  that decompression might slow down booting if the boot flash
	  is connected through a slow link (i.e. SPI).

config INCLUDE_CONFIG_FILE
	bool "Include the coreboot .config file into the ROM image"
	default y
	help
	  Include the .config file that was used to compile coreboot
	  in the (CBFS) ROM image. This is useful if you want to know which
	  options were used to build a specific coreboot.rom image.

	  Saying Y here will increase the image size by 2-3KB.

	  You can use the following command to easily list the options:

	    grep -a CONFIG_ coreboot.rom

	  Alternatively, you can also use cbfstool to print the image
	  contents (including the raw 'config' item we're looking for).

	  Example:

	    $ cbfstool coreboot.rom print
	    coreboot.rom: 4096 kB, bootblocksize 1008, romsize 4194304,
	                                               offset 0x0
	    Alignment: 64 bytes

	    Name                           Offset     Type         Size
	    cmos_layout.bin                0x0        cmos layout  1159
	    fallback/romstage              0x4c0      stage        339756
	    fallback/ramstage              0x53440    stage        186664
	    fallback/payload               0x80dc0    payload      51526
	    config                         0x8d740    raw          3324
	    (empty)                        0x8e480    null         3610440

config EARLY_CBMEM_INIT
	def_bool !LATE_CBMEM_INIT

config COLLECT_TIMESTAMPS
	bool "Create a table of timestamps collected during boot"
	default n
	help
	  Make coreboot create a table of timer-ID/timer-value pairs to
	  allow measuring time spent at different phases of the boot process.

config USE_BLOBS
	bool "Allow use of binary-only repository"
	default n
	help
	  This draws in the blobs repository, which contains binary files that
	  might be required for some chipsets or boards.
	  This flag ensures that a "Free" option remains available for users.

config COVERAGE
	bool "Code coverage support"
	depends on COMPILER_GCC
	default n
	help
	  Add code coverage support for coreboot. This will store code
	  coverage information in CBMEM for extraction from user space.
	  If unsure, say N.

config RELOCATABLE_MODULES
	bool "Relocatable Modules"
	default n
	help
	 If RELOCATABLE_MODULES is selected then support is enabled for
	 building relocatable modules in the RAM stage. Those modules can be
	 loaded anywhere and all the relocations are handled automatically.

config RELOCATABLE_RAMSTAGE
	depends on (RELOCATABLE_MODULES && EARLY_CBMEM_INIT)
	bool "Build the ramstage to be relocatable in 32-bit address space."
	default n
	help
	 The reloctable ramstage support allows for the ramstage to be built
	 as a relocatable module. The stage loader can identify a place
	 out of the OS way so that copying memory is unnecessary during an S3
	 wake. When selecting this option the romstage is responsible for
	 determing a stack location to use for loading the ramstage.

config CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM
	depends on RELOCATABLE_RAMSTAGE
	bool "Cache the relocated ramstage outside of cbmem."
	default n
	help
	 The relocated ramstage is saved in an area specified by the
	 by the board and/or chipset.

choice
	prompt "Bootblock behaviour"
	default BOOTBLOCK_SIMPLE

config BOOTBLOCK_SIMPLE
	bool "Always load fallback"

config BOOTBLOCK_NORMAL
	bool "Switch to normal if CMOS says so"

endchoice

config BOOTBLOCK_SOURCE
	string
	default "bootblock_simple.c" if BOOTBLOCK_SIMPLE
	default "bootblock_normal.c" if BOOTBLOCK_NORMAL

config SKIP_MAX_REBOOT_CNT_CLEAR
	bool "Do not clear reboot count after successful boot"
	default n
	depends on EXPERT
	help
	  Do not clear the reboot count immediately after successful boot.
	  Set to allow the payload to control normal/fallback image recovery.

config UPDATE_IMAGE
	bool "Update existing coreboot.rom image"
	default n
	help
	  If this option is enabled, no new coreboot.rom file
	  is created. Instead it is expected that there already
	  is a suitable file for further processing.
	  The bootblock will not be modified.

endmenu

source "src/mainboard/Kconfig"

source "src/arch/*/Kconfig"

source "src/vendorcode/*/Kconfig"

config SYSTEM_TYPE_LAPTOP
       default n
       bool

menu "Chipset"

comment "CPU"
source "src/cpu/Kconfig"
comment "Northbridge"
source "src/northbridge/*/*/Kconfig"
comment "Southbridge"
source "src/southbridge/*/*/Kconfig"
comment "Super I/O"
source "src/superio/*/Kconfig"
comment "Embedded Controllers"
source "src/ec/acpi/Kconfig"
source "src/ec/*/*/Kconfig"
comment "SoC"
source "src/soc/*/*/Kconfig"
source "src/drivers/intel/fsp/Kconfig"

endmenu

config CPU_HAS_BOOTBLOCK_INIT
	bool
	default n

config MAINBOARD_HAS_BOOTBLOCK_INIT
	bool
	default n

source "src/device/Kconfig"

menu "Generic Drivers"
source "src/drivers/*/Kconfig"
endmenu

config TPM
	bool
	default n
	select LPC_TPM if ARCH_X86
	select I2C_TPM if ARCH_ARM
	select I2C_TPM if ARCH_ARM64
	help
	  Enable this option to enable TPM support in coreboot.

	  If unsure, say N.

config RAMTOP
	hex
	default 0x200000
	depends on ARCH_X86

config HEAP_SIZE
	hex
	default 0x4000

config STACK_SIZE
	hex
	default 0x1000

config MAX_CPUS
	int
	default 1

config MMCONF_SUPPORT_DEFAULT
	bool
	default n

config MMCONF_SUPPORT
	bool
	default n

config BOOTMODE_STRAPS
	bool
	default n

source "src/console/Kconfig"

config HAVE_ACPI_RESUME
	bool
	default n

config HAVE_ACPI_SLIC
	bool
	default n

config HAVE_HARD_RESET
	bool
	default n
	help
	  This variable specifies whether a given board has a hard_reset
	  function, no matter if it's provided by board code or chipset code.

config HAVE_MONOTONIC_TIMER
	def_bool n
	help
	 The board/chipset provides a monotonic timer.

config GENERIC_UDELAY
	def_bool n
	depends on HAVE_MONOTONIC_TIMER
	help
	 The board/chipset uses a generic udelay function utilizing the
	 monotonic timer.

config TIMER_QUEUE
	def_bool n
	depends on HAVE_MONOTONIC_TIMER
	help
	  Provide a timer queue for performing time-based callbacks.

config COOP_MULTITASKING
	def_bool n
	depends on TIMER_QUEUE && ARCH_X86
	help
	  Cooperative multitasking allows callbacks to be multiplexed on the
	  main thread of ramstage. With this enabled it allows for multiple
	  execution paths to take place when they have udelay() calls within
	  their code.

config NUM_THREADS
	int
	default 4
	depends on COOP_MULTITASKING
	help
	  How many execution threads to cooperatively multitask with.

config HAVE_OPTION_TABLE
	bool
	default n
	help
	  This variable specifies whether a given board has a cmos.layout
	  file containing NVRAM/CMOS bit definitions.
	  It defaults to 'n' but can be selected in mainboard/*/Kconfig.

config PIRQ_ROUTE
	bool
	default n

config HAVE_SMI_HANDLER
	bool
	default n

config PCI_IO_CFG_EXT
	bool
	default n

config IOAPIC
	bool
	default n

config CBFS_SIZE
	hex
	default ROM_SIZE

config CACHE_ROM_SIZE_OVERRIDE
	hex
	default 0

# TODO: Can probably be removed once all chipsets have kconfig options for it.
config VIDEO_MB
	int
	default 0

config USE_WATCHDOG_ON_BOOT
	bool
	default n

config VGA
	bool
	default n
	help
	  Build board-specific VGA code.

config GFXUMA
	bool
	default n
	help
	  Enable Unified Memory Architecture for graphics.

config HAVE_ACPI_TABLES
	bool
	help
	  This variable specifies whether a given board has ACPI table support.
	  It is usually set in mainboard/*/Kconfig.

config HAVE_MP_TABLE
	bool
	help
	  This variable specifies whether a given board has MP table support.
	  It is usually set in mainboard/*/Kconfig.
	  Whether or not the MP table is actually generated by coreboot
	  is configurable by the user via GENERATE_MP_TABLE.

config HAVE_PIRQ_TABLE
	bool
	help
	  This variable specifies whether a given board has PIRQ table support.
	  It is usually set in mainboard/*/Kconfig.
	  Whether or not the PIRQ table is actually generated by coreboot
	  is configurable by the user via GENERATE_PIRQ_TABLE.

config MAX_PIRQ_LINKS
	int
	default 4
	help
	  This variable specifies the number of PIRQ interrupt links which are
	  routable. On most chipsets, this is 4, INTA through INTD. Some
	  chipsets offer more than four links, commonly up to INTH. They may
	  also have a separate link for ATA or IOAPIC interrupts. When the PIRQ
	  table specifies links greater than 4, pirq_route_irqs will not
	  function properly, unless this variable is correctly set.

config PER_DEVICE_ACPI_TABLES
	bool
	default n

config COMMON_FADT
	bool
	default n

#These Options are here to avoid "undefined" warnings.
#The actual selection and help texts are in the following menu.

menu "System tables"

config GENERATE_MP_TABLE
	prompt "Generate an MP table" if HAVE_MP_TABLE || DRIVERS_GENERIC_IOAPIC
	bool
	default HAVE_MP_TABLE || DRIVERS_GENERIC_IOAPIC
	help
	  Generate an MP table (conforming to the Intel MultiProcessor
	  specification 1.4) for this board.

	  If unsure, say Y.

config GENERATE_PIRQ_TABLE
	prompt "Generate a PIRQ table" if HAVE_PIRQ_TABLE
	bool
	default HAVE_PIRQ_TABLE
	help
	  Generate a PIRQ table for this board.

	  If unsure, say Y.

config GENERATE_SMBIOS_TABLES
	depends on ARCH_X86
	bool "Generate SMBIOS tables"
	default y
	help
	  Generate SMBIOS tables for this board.

	  If unsure, say Y.

config MAINBOARD_SERIAL_NUMBER
	string "SMBIOS Serial Number"
	depends on GENERATE_SMBIOS_TABLES
	default "123456789"
        help
	  The Serial Number to store in SMBIOS structures.

config MAINBOARD_VERSION
	string "SMBIOS Version Number"
	depends on GENERATE_SMBIOS_TABLES
	default "1.0"
	help
	  The Version Number to store in SMBIOS structures.

config MAINBOARD_SMBIOS_MANUFACTURER
	string "SMBIOS Manufacturer"
	depends on GENERATE_SMBIOS_TABLES
	default MAINBOARD_VENDOR
	help
	  Override the default Manufacturer stored in SMBIOS structures.

config MAINBOARD_SMBIOS_PRODUCT_NAME
	string "SMBIOS Product name"
	depends on GENERATE_SMBIOS_TABLES
	default MAINBOARD_PART_NUMBER
	help
	  Override the default Product name stored in SMBIOS structures.

endmenu

menu "Payload"

choice
	prompt "Add a payload"
	default PAYLOAD_NONE if !ARCH_X86
	default PAYLOAD_SEABIOS if ARCH_X86

config PAYLOAD_NONE
	bool "None"
	help
	  Select this option if you want to create an "empty" coreboot
	  ROM image for a certain mainboard, i.e. a coreboot ROM image
	  which does not yet contain a payload.

	  For such an image to be useful, you have to use 'cbfstool'
	  to add a payload to the ROM image later.

config PAYLOAD_ELF
	bool "An ELF executable payload"
	help
	  Select this option if you have a payload image (an ELF file)
	  which coreboot should run as soon as the basic hardware
	  initialization is completed.

	  You will be able to specify the location and file name of the
	  payload image later.

config PAYLOAD_LINUX
	bool "A Linux payload"
	help
	  Select this option if you have a Linux bzImage which coreboot
	  should run as soon as the basic hardware initialization
	  is completed.

	  You will be able to specify the location and file name of the
	  payload image later.

config PAYLOAD_SEABIOS
	bool "SeaBIOS"
	depends on ARCH_X86
	help
	  Select this option if you want to build a coreboot image
	  with a SeaBIOS payload. If you don't know what this is
	  about, just leave it enabled.

	  See http://coreboot.org/Payloads for more information.

config PAYLOAD_FILO
	bool "FILO"
	help
	  Select this option if you want to build a coreboot image
	  with a FILO payload. If you don't know what this is
	  about, just leave it enabled.

	  See http://coreboot.org/Payloads for more information.

config PAYLOAD_GRUB2
	bool "GRUB2"
	help
	  Select this option if you want to build a coreboot image
	  with a GRUB2 payload. If you don't know what this is
	  about, just leave it enabled.

	  See http://coreboot.org/Payloads for more information.

config PAYLOAD_TIANOCORE
	bool "Tiano Core"
	help
	  Select this option if you want to build a coreboot image
	  with a Tiano Core payload. If you don't know what this is
	  about, just leave it enabled.

	  See http://coreboot.org/Payloads for more information.

endchoice

choice
	prompt "SeaBIOS version"
	default SEABIOS_STABLE
	depends on PAYLOAD_SEABIOS

config SEABIOS_STABLE
	bool "1.7.5"
	help
	  Stable SeaBIOS version
config SEABIOS_MASTER
	bool "master"
	help
	  Newest SeaBIOS version

endchoice

config SEABIOS_PS2_TIMEOUT
	prompt "PS/2 keyboard controller initialization timeout (milliseconds)" if PAYLOAD_SEABIOS
	default 0
	depends on EXPERT
	int
	help
	  Some PS/2 keyboard controllers don't respond to commands immediately
	  after powering on. This specifies how long SeaBIOS will wait for the
	  keyboard controller to become ready before giving up.

config SEABIOS_THREAD_OPTIONROMS
	prompt "Hardware init during option ROM execution" if PAYLOAD_SEABIOS
	default n
	bool
	help
	  Allow hardware init to run in parallel with optionrom execution.

	  This can reduce boot time, but can cause some timing
	  variations during option ROM code execution. It is not
	  known if all option ROMs will behave properly with this option.

config SEABIOS_MALLOC_UPPERMEMORY
	bool
	default y
	depends on PAYLOAD_SEABIOS
	help
	  Use the "Upper Memory Block" area (0xc0000-0xf0000) for internal
	  "low memory" allocations.  If this is not selected, the memory is
	  instead allocated from the "9-segment" (0x90000-0xa0000).
	  This is not typically needed, but may be required on some platforms
	  to allow USB and SATA buffers to be written correctly by the
	  hardware.  In general, if this is desired, the option will be
	  set to 'N' by the chipset Kconfig.

config SEABIOS_VGA_COREBOOT
	prompt "Include generated option rom that implements legacy VGA BIOS compatibility" if PAYLOAD_SEABIOS
	default n
	depends on !VGA_BIOS && (MAINBOARD_DO_NATIVE_VGA_INIT || MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG)
	bool
	help
	  Coreboot can initialize the GPU of some mainboards.

	  After initializing the GPU, the information about it can be passed to the payload.
	  Provide an option rom that implements this legacy VGA BIOS compatibility requirement.

choice
	prompt "GRUB2 version"
	default GRUB2_MASTER
	depends on PAYLOAD_GRUB2

config GRUB2_MASTER
	bool "HEAD"
	help
	  Newest GRUB2 version

endchoice

choice
	prompt "FILO version"
	default FILO_STABLE
	depends on PAYLOAD_FILO

config FILO_STABLE
	bool "0.6.0"
	help
	  Stable FILO version

config FILO_MASTER
	bool "HEAD"
	help
	  Newest FILO version

endchoice

config PAYLOAD_FILE
	string "Payload path and filename"
	depends on PAYLOAD_ELF
	default "payload.elf"
	help
	  The path and filename of the ELF executable file to use as payload.

config PAYLOAD_FILE
	string "Linux path and filename"
	depends on PAYLOAD_LINUX
	default "bzImage"
	help
	  The path and filename of the bzImage kernel to use as payload.

config PAYLOAD_FILE
	depends on PAYLOAD_SEABIOS
	default "payloads/external/SeaBIOS/seabios/out/bios.bin.elf"

config PAYLOAD_VGABIOS_FILE
	string
	depends on PAYLOAD_SEABIOS && SEABIOS_VGA_COREBOOT
	default "payloads/external/SeaBIOS/seabios/out/vgabios.bin"

config PAYLOAD_FILE
	depends on PAYLOAD_FILO
	default "payloads/external/FILO/filo/build/filo.elf"

config PAYLOAD_FILE
	depends on PAYLOAD_GRUB2
	default "payloads/external/GRUB2/grub2/build/default_payload.elf"

config PAYLOAD_FILE
	string "Tianocore firmware volume"
	depends on PAYLOAD_TIANOCORE
	default "COREBOOT.fd"
	help
	  The result of a corebootPkg build

# TODO: Defined if no payload? Breaks build?
config COMPRESSED_PAYLOAD_LZMA
	bool "Use LZMA compression for payloads"
	default y
	depends on PAYLOAD_ELF || PAYLOAD_SEABIOS || PAYLOAD_FILO || PAYLOAD_TIANOCORE || PAYLOAD_GRUB2
	help
	  In order to reduce the size payloads take up in the ROM chip
	  coreboot can compress them using the LZMA algorithm.

config LINUX_COMMAND_LINE
	string "Linux command line"
	depends on PAYLOAD_LINUX
	default ""
	help
	  A command line to add to the Linux kernel.

config LINUX_INITRD
	string "Linux initrd"
	depends on PAYLOAD_LINUX
	default ""
	help
	  An initrd image to add to the Linux kernel.

endmenu

menu "Debugging"

# TODO: Better help text and detailed instructions.
config GDB_STUB
	bool "GDB debugging support"
	default n
	help
	  If enabled, you will be able to set breakpoints for gdb debugging.
	  See src/arch/x86/lib/c_start.S for details.

config GDB_WAIT
	bool "Wait for a GDB connection"
	default n
	depends on GDB_STUB
	help
	  If enabled, coreboot will wait for a GDB connection.

config DEBUG_CBFS
	bool "Output verbose CBFS debug messages"
	default n
	help
	  This option enables additional CBFS related debug messages.

config HAVE_DEBUG_RAM_SETUP
	def_bool n

config DEBUG_RAM_SETUP
	bool "Output verbose RAM init debug messages"
	default n
	depends on HAVE_DEBUG_RAM_SETUP
	help
	  This option enables additional RAM init related debug messages.
	  It is recommended to enable this when debugging issues on your
	  board which might be RAM init related.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config HAVE_DEBUG_CAR
	def_bool n

config DEBUG_CAR
	def_bool n
	depends on HAVE_DEBUG_CAR

if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8
# Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional
# printk(BIOS_DEBUG, ...) calls.
config DEBUG_CAR
	bool "Output verbose Cache-as-RAM debug messages"
	default n
	depends on HAVE_DEBUG_CAR
	help
	  This option enables additional CAR related debug messages.
endif

config DEBUG_PIRQ
	bool "Check PIRQ table consistency"
	default n
	depends on GENERATE_PIRQ_TABLE
	help
	  If unsure, say N.

config HAVE_DEBUG_SMBUS
	def_bool n

config DEBUG_SMBUS
	bool "Output verbose SMBus debug messages"
	default n
	depends on HAVE_DEBUG_SMBUS
	help
	  This option enables additional SMBus (and SPD) debug messages.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config DEBUG_SMI
	bool "Output verbose SMI debug messages"
	default n
	depends on HAVE_SMI_HANDLER
	help
	  This option enables additional SMI related debug messages.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config DEBUG_SMM_RELOCATION
	bool "Debug SMM relocation code"
	default n
	depends on HAVE_SMI_HANDLER
	help
	  This option enables additional SMM handler relocation related
	  debug messages.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

# Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional
# printk(BIOS_DEBUG, ...) calls.
config DEBUG_MALLOC
	prompt "Output verbose malloc debug messages" if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8
	bool
	default n
	help
	  This option enables additional malloc related debug messages.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

# Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional
# printk(BIOS_DEBUG, ...) calls.
config DEBUG_ACPI
	prompt "Output verbose ACPI debug messages" if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8
	bool
	default n
	help
	  This option enables additional ACPI related debug messages.

	  Note: This option will slightly increase the size of the coreboot image.

	  If unsure, say N.

# Only visible if debug level is DEBUG (7) or SPEW (8) as it does additional
# printk(BIOS_DEBUG, ...) calls.
config REALMODE_DEBUG
	prompt "Enable debug messages for option ROM execution" if DEFAULT_CONSOLE_LOGLEVEL_7 || DEFAULT_CONSOLE_LOGLEVEL_8
	bool
	default n
	depends on PCI_OPTION_ROM_RUN_REALMODE
	help
	  This option enables additional x86emu related debug messages.

	  Note: This option will increase the time to emulate a ROM.

	  If unsure, say N.

config X86EMU_DEBUG
	bool "Output verbose x86emu debug messages"
	default n
	depends on PCI_OPTION_ROM_RUN_YABEL
	help
	  This option enables additional x86emu related debug messages.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_JMP
	bool "Trace JMP/RETF"
	default n
	depends on X86EMU_DEBUG
	help
	  Print information about JMP and RETF opcodes from x86emu.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_TRACE
	bool "Trace all opcodes"
	default n
	depends on X86EMU_DEBUG
	help
	  Print _all_ opcodes that are executed by x86emu.

	  WARNING: This will produce a LOT of output and take a long time.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_PNP
	bool "Log Plug&Play accesses"
	default n
	depends on X86EMU_DEBUG
	help
	  Print Plug And Play accesses made by option ROMs.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_DISK
	bool "Log Disk I/O"
	default n
	depends on X86EMU_DEBUG
	help
	  Print Disk I/O related messages.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_PMM
	bool "Log PMM"
	default n
	depends on X86EMU_DEBUG
	help
	  Print messages related to POST Memory Manager (PMM).

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.


config X86EMU_DEBUG_VBE
	bool "Debug VESA BIOS Extensions"
	default n
	depends on X86EMU_DEBUG
	help
	  Print messages related to VESA BIOS Extension (VBE) functions.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_INT10
	bool "Redirect INT10 output to console"
	default n
	depends on X86EMU_DEBUG
	help
	  Let INT10 (i.e. character output) calls print messages to debug output.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_INTERRUPTS
	bool "Log intXX calls"
	default n
	depends on X86EMU_DEBUG
	help
	  Print messages related to interrupt handling.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_CHECK_VMEM_ACCESS
	bool "Log special memory accesses"
	default n
	depends on X86EMU_DEBUG
	help
	  Print messages related to accesses to certain areas of the virtual
	  memory (e.g. BDA (BIOS Data Area) or interrupt vectors)

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_MEM
	bool "Log all memory accesses"
	default n
	depends on X86EMU_DEBUG
	help
	  Print memory accesses made by option ROM.
	  Note: This also includes accesses to fetch instructions.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_IO
	bool "Log IO accesses"
	default n
	depends on X86EMU_DEBUG
	help
	  Print I/O accesses made by option ROM.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_TIMINGS
	bool "Output timing information"
	default n
	depends on X86EMU_DEBUG && UDELAY_LAPIC && HAVE_MONOTONIC_TIMER
	help
	  Print timing information needed by i915tool.

	  If unsure, say N.

config DEBUG_TPM
	bool "Output verbose TPM debug messages"
	default n
	depends on TPM
	help
	  This option enables additional TPM related debug messages.

config DEBUG_SPI_FLASH
	bool "Output verbose SPI flash debug messages"
	default n
	depends on SPI_FLASH
	help
	  This option enables additional SPI flash related debug messages.

config DEBUG_USBDEBUG
	bool "Output verbose USB 2.0 EHCI debug dongle messages"
	default n
	depends on USBDEBUG
	help
	  This option enables additional USB 2.0 debug dongle related messages.

	  Select this to debug the connection of usbdebug dongle. Note that
	  you need some other working console to receive the messages.

if SOUTHBRIDGE_INTEL_BD82X6X && DEFAULT_CONSOLE_LOGLEVEL_8
# Only visible with the right southbridge and loglevel.
config DEBUG_INTEL_ME
	bool "Verbose logging for Intel Management Engine"
	default n
	help
	  Enable verbose logging for Intel Management Engine driver that
	  is present on Intel 6-series chipsets.
endif

config TRACE
	bool "Trace function calls"
	default n
	help
	  If enabled, every function will print information to console once
	  the function is entered. The syntax is ~0xaaaabbbb(0xccccdddd)
	  the 0xaaaabbbb is the actual function and 0xccccdddd is EIP
	  of calling function. Please note some printk releated functions
	  are omitted from trace to have good looking console dumps.

config DEBUG_COVERAGE
	bool "Debug code coverage"
	default n
	depends on COVERAGE
	help
	  If enabled, the code coverage hooks in coreboot will output some
	  information about the coverage data that is dumped.

config GENERIC_GPIO_LIB
	bool "Build generic GPIO library"
	default n
	help
	  If enabled, compile the generic GPIO library. A "generic" GPIO
	  implies configurability usually found on SoCs, particularly the
	  ability to control internal pull resistors.

config BOARD_ID_SUPPORT
	bool "Discover board ID and store it in coreboot table"
	default n
	select GENERIC_GPIO_LIB
	help
	  If enabled, coreboot discovers the board id of the hardware it is
	  running on and reports it through the coreboot table to the rest of
	  the system.

endmenu

# These probably belong somewhere else, but they are needed somewhere.
config ENABLE_APIC_EXT_ID
	bool
	default n

config WARNINGS_ARE_ERRORS
	bool
	default y

# The four POWER_BUTTON_DEFAULT_ENABLE, POWER_BUTTON_DEFAULT_DISABLE,
# POWER_BUTTON_FORCE_ENABLE and POWER_BUTTON_FORCE_DISABLE options are
# mutually exclusive. One of these options must be selected in the
# mainboard Kconfig if the chipset supports enabling and disabling of
# the power button. Chipset code uses the ENABLE_POWER_BUTTON option set
# in mainboard/Kconfig to know if the button should be enabled or not.

config POWER_BUTTON_DEFAULT_ENABLE
	def_bool n
	help
	  Select when the board has a power button which can optionally be
	  disabled by the user.

config POWER_BUTTON_DEFAULT_DISABLE
	def_bool n
	help
	  Select when the board has a power button which can optionally be
	  enabled by the user, e.g. when the board ships with a jumper over
	  the power switch contacts.

config POWER_BUTTON_FORCE_ENABLE
	def_bool n
	help
	  Select when the board requires that the power button is always
	  enabled.

config POWER_BUTTON_FORCE_DISABLE
	def_bool n
	help
	  Select when the board requires that the power button is always
	  disabled, e.g. when it has been hardwired to ground.

config POWER_BUTTON_IS_OPTIONAL
	bool
	default y if POWER_BUTTON_DEFAULT_ENABLE || POWER_BUTTON_DEFAULT_DISABLE
	default n if !(POWER_BUTTON_DEFAULT_ENABLE || POWER_BUTTON_DEFAULT_DISABLE)
	help
	  Internal option that controls ENABLE_POWER_BUTTON visibility.

config REG_SCRIPT
	bool
	default n
	help
	  Internal option that controls whether we compile in register scripts.

config MAX_REBOOT_CNT
	int
	default 3
	help
	  Internal option that sets the maximum number of bootblock executions allowed
	  with the normal image enabled before assuming the normal image is defective
	  and switching to the fallback image.