Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 1 | /* |
| 2 | * This file is part of the coreboot project. |
| 3 | * |
| 4 | * Copyright (C) 2007 AMD |
| 5 | * Written by Yinghai Lu <yinghailu@amd.com> for AMD. |
| 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License as published by |
| 9 | * the Free Software Foundation; either version 2 of the License, or |
| 10 | * (at your option) any later version. |
| 11 | * |
| 12 | * This program is distributed in the hope that it will be useful, |
| 13 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 14 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 15 | * GNU General Public License for more details. |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 16 | */ |
| 17 | |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 18 | #define FAM10_SCAN_PCI_BUS 0 |
| 19 | #define FAM10_ALLOCATE_IO_RANGE 1 |
| 20 | |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 21 | #include <stdint.h> |
| 22 | #include <string.h> |
| 23 | #include <device/pci_def.h> |
| 24 | #include <device/pci_ids.h> |
| 25 | #include <arch/io.h> |
| 26 | #include <device/pnp_def.h> |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 27 | #include <cpu/x86/lapic.h> |
Patrick Georgi | 12584e2 | 2010-05-08 09:14:51 +0000 | [diff] [blame] | 28 | #include <console/console.h> |
Timothy Pearson | 91e9f67 | 2015-03-19 16:44:46 -0500 | [diff] [blame] | 29 | #include <timestamp.h> |
Patrick Georgi | d083595 | 2010-10-05 09:07:10 +0000 | [diff] [blame] | 30 | #include <lib.h> |
Uwe Hermann | 26535d6 | 2010-11-20 20:36:40 +0000 | [diff] [blame] | 31 | #include <spd.h> |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 32 | #include <cpu/amd/model_10xxx_rev.h> |
stepan | 836ae29 | 2010-12-08 05:42:47 +0000 | [diff] [blame] | 33 | #include "southbridge/nvidia/mcp55/early_smbus.c" // for enable the FAN |
Edward O'Callaghan | 77757c2 | 2015-01-04 21:33:39 +1100 | [diff] [blame] | 34 | #include <northbridge/amd/amdfam10/raminit.h> |
| 35 | #include <northbridge/amd/amdfam10/amdfam10.h> |
Stefan Reinauer | bcb8c97 | 2010-04-25 18:06:32 +0000 | [diff] [blame] | 36 | #include "lib/delay.c" |
Edward O'Callaghan | 77757c2 | 2015-01-04 21:33:39 +1100 | [diff] [blame] | 37 | #include <cpu/x86/lapic.h> |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 38 | #include "northbridge/amd/amdfam10/reset_test.c" |
Edward O'Callaghan | beb0f26 | 2014-04-29 13:09:50 +1000 | [diff] [blame] | 39 | #include <superio/winbond/common/winbond.h> |
| 40 | #include <superio/winbond/w83627hf/w83627hf.h> |
Edward O'Callaghan | 77757c2 | 2015-01-04 21:33:39 +1100 | [diff] [blame] | 41 | #include <cpu/x86/bist.h> |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 42 | #include "northbridge/amd/amdfam10/debug.c" |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 43 | #include "northbridge/amd/amdfam10/setup_resource_map.c" |
stepan | 836ae29 | 2010-12-08 05:42:47 +0000 | [diff] [blame] | 44 | #include "southbridge/nvidia/mcp55/early_ctrl.c" |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 45 | |
| 46 | #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) |
Uwe Hermann | 9b9791c | 2010-12-06 18:17:01 +0000 | [diff] [blame] | 47 | #define DUMMY_DEV PNP_DEV(0x2e, 0) |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 48 | |
Knut Kujat | f7f9e92 | 2010-03-13 12:54:58 +0000 | [diff] [blame] | 49 | #define SMBUS_SWITCH1 0x70 |
| 50 | #define SMBUS_SWITCH2 0x72 |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 51 | |
| 52 | static inline void activate_spd_rom(const struct mem_controller *ctrl) |
| 53 | { |
Knut Kujat | f7f9e92 | 2010-03-13 12:54:58 +0000 | [diff] [blame] | 54 | smbus_send_byte(SMBUS_SWITCH1, 5 & 0x0f); |
| 55 | smbus_send_byte(SMBUS_SWITCH2, (5 >> 4) & 0x0f); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 56 | } |
| 57 | |
| 58 | static inline int spd_read_byte(unsigned device, unsigned address) |
| 59 | { |
| 60 | return smbus_read_byte(device, address); |
| 61 | } |
| 62 | |
Edward O'Callaghan | 77757c2 | 2015-01-04 21:33:39 +1100 | [diff] [blame] | 63 | #include <northbridge/amd/amdfam10/amdfam10.h> |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 64 | #include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c" |
stepan | 8301d83 | 2010-12-08 07:07:33 +0000 | [diff] [blame] | 65 | #include "northbridge/amd/amdfam10/pci.c" |
Stefan Reinauer | 14e2277 | 2010-04-27 06:56:47 +0000 | [diff] [blame] | 66 | #include "resourcemap.c" |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 67 | #include "cpu/amd/quadcore/quadcore.c" |
Edward O'Callaghan | 77757c2 | 2015-01-04 21:33:39 +1100 | [diff] [blame] | 68 | #include <southbridge/nvidia/mcp55/early_setup_ss.h> |
stepan | 836ae29 | 2010-12-08 05:42:47 +0000 | [diff] [blame] | 69 | #include "southbridge/nvidia/mcp55/early_setup_car.c" |
Edward O'Callaghan | 77757c2 | 2015-01-04 21:33:39 +1100 | [diff] [blame] | 70 | #include <cpu/amd/microcode.h> |
Xavi Drudis Ferran | 4c28a6f | 2011-02-26 23:29:44 +0000 | [diff] [blame] | 71 | |
Timothy Pearson | b30d7ed | 2015-10-16 14:24:06 -0500 | [diff] [blame] | 72 | #include "cpu/amd/family_10h-family_15h/init_cpus.c" |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 73 | #include "northbridge/amd/amdfam10/early_ht.c" |
| 74 | |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 75 | static void sio_setup(void) |
| 76 | { |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 77 | uint32_t dword; |
| 78 | uint8_t byte; |
| 79 | enable_smbus(); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 80 | // smbusx_write_byte(1, (0x58>>1), 0, 0x80); /* select bank0 */ |
| 81 | smbusx_write_byte(1, (0x58>>1), 0xb1, 0xff); /* set FAN ctrl to DC mode */ |
| 82 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 83 | byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b); |
| 84 | byte |= 0x20; |
| 85 | pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte); |
Stefan Reinauer | 14e2277 | 2010-04-27 06:56:47 +0000 | [diff] [blame] | 86 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 87 | dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0); |
| 88 | dword |= (1<<0); |
| 89 | pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword); |
Stefan Reinauer | 14e2277 | 2010-04-27 06:56:47 +0000 | [diff] [blame] | 90 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 91 | dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4); |
| 92 | dword |= (1<<16); |
| 93 | pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 94 | } |
| 95 | |
Uwe Hermann | 26535d6 | 2010-11-20 20:36:40 +0000 | [diff] [blame] | 96 | static const u8 spd_addr[] = { |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 97 | /* first node */ |
Uwe Hermann | 26535d6 | 2010-11-20 20:36:40 +0000 | [diff] [blame] | 98 | RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, |
| 99 | #if CONFIG_MAX_PHYSICAL_CPUS > 1 |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 100 | /* second node */ |
Uwe Hermann | 26535d6 | 2010-11-20 20:36:40 +0000 | [diff] [blame] | 101 | RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0, |
| 102 | #endif |
| 103 | #if CONFIG_MAX_PHYSICAL_CPUS > 2 |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 104 | /* third node */ |
Uwe Hermann | 26535d6 | 2010-11-20 20:36:40 +0000 | [diff] [blame] | 105 | RC02, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0, |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 106 | /* fourth node */ |
Uwe Hermann | 26535d6 | 2010-11-20 20:36:40 +0000 | [diff] [blame] | 107 | RC03, DIMM4, DIMM6,0 , 0, DIMM5, DIMM7, 0, 0, |
| 108 | #endif |
| 109 | }; |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 110 | |
Knut Kujat | f7f9e92 | 2010-03-13 12:54:58 +0000 | [diff] [blame] | 111 | #define GPIO1_DEV PNP_DEV(0x2e, W83627HF_GAME_MIDI_GPIO1) |
| 112 | #define GPIO2_DEV PNP_DEV(0x2e, W83627HF_GPIO2) |
| 113 | #define GPIO3_DEV PNP_DEV(0x2e, W83627HF_GPIO3) |
Uwe Hermann | 7b99705 | 2010-11-21 22:47:22 +0000 | [diff] [blame] | 114 | |
Edward O'Callaghan | beb0f26 | 2014-04-29 13:09:50 +1000 | [diff] [blame] | 115 | /* TODO: superio code should really not be in mainboard */ |
| 116 | static void pnp_enter_ext_func_mode(device_t dev) |
| 117 | { |
| 118 | u16 port = dev >> 8; |
| 119 | outb(0x87, port); |
| 120 | outb(0x87, port); |
| 121 | } |
| 122 | |
| 123 | static void pnp_exit_ext_func_mode(device_t dev) |
| 124 | { |
| 125 | u16 port = dev >> 8; |
| 126 | outb(0xaa, port); |
| 127 | } |
| 128 | |
Stefan Reinauer | 523ebd9 | 2010-04-14 18:59:42 +0000 | [diff] [blame] | 129 | static void write_GPIO(void) |
Knut Kujat | f7f9e92 | 2010-03-13 12:54:58 +0000 | [diff] [blame] | 130 | { |
| 131 | pnp_enter_ext_func_mode(GPIO1_DEV); |
| 132 | pnp_set_logical_device(GPIO1_DEV); |
| 133 | pnp_write_config(GPIO1_DEV, 0x30, 0x01); |
| 134 | pnp_write_config(GPIO1_DEV, 0x60, 0x00); |
| 135 | pnp_write_config(GPIO1_DEV, 0x61, 0x00); |
| 136 | pnp_write_config(GPIO1_DEV, 0x62, 0x00); |
| 137 | pnp_write_config(GPIO1_DEV, 0x63, 0x00); |
| 138 | pnp_write_config(GPIO1_DEV, 0x70, 0x00); |
| 139 | pnp_write_config(GPIO1_DEV, 0xf0, 0xff); |
| 140 | pnp_write_config(GPIO1_DEV, 0xf1, 0xff); |
| 141 | pnp_write_config(GPIO1_DEV, 0xf2, 0x00); |
| 142 | pnp_exit_ext_func_mode(GPIO1_DEV); |
| 143 | |
| 144 | pnp_enter_ext_func_mode(GPIO2_DEV); |
| 145 | pnp_set_logical_device(GPIO2_DEV); |
| 146 | pnp_write_config(GPIO2_DEV, 0x30, 0x01); |
| 147 | pnp_write_config(GPIO2_DEV, 0xf0, 0xef); |
| 148 | pnp_write_config(GPIO2_DEV, 0xf1, 0xff); |
| 149 | pnp_write_config(GPIO2_DEV, 0xf2, 0x00); |
| 150 | pnp_write_config(GPIO2_DEV, 0xf3, 0x00); |
| 151 | pnp_write_config(GPIO2_DEV, 0xf5, 0x48); |
| 152 | pnp_write_config(GPIO2_DEV, 0xf6, 0x00); |
| 153 | pnp_write_config(GPIO2_DEV, 0xf7, 0xc0); |
| 154 | pnp_exit_ext_func_mode(GPIO2_DEV); |
| 155 | |
| 156 | pnp_enter_ext_func_mode(GPIO3_DEV); |
| 157 | pnp_set_logical_device(GPIO3_DEV); |
| 158 | pnp_write_config(GPIO3_DEV, 0x30, 0x00); |
| 159 | pnp_write_config(GPIO3_DEV, 0xf0, 0xff); |
| 160 | pnp_write_config(GPIO3_DEV, 0xf1, 0xff); |
| 161 | pnp_write_config(GPIO3_DEV, 0xf2, 0xff); |
| 162 | pnp_write_config(GPIO3_DEV, 0xf3, 0x40); |
| 163 | pnp_exit_ext_func_mode(GPIO3_DEV); |
| 164 | } |
| 165 | |
Patrick Georgi | ce6fb1e | 2010-03-17 22:44:39 +0000 | [diff] [blame] | 166 | void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 167 | { |
Patrick Georgi | bbc880e | 2012-11-20 18:20:56 +0100 | [diff] [blame] | 168 | struct sys_info *sysinfo = &sysinfo_car; |
Uwe Hermann | 7b99705 | 2010-11-21 22:47:22 +0000 | [diff] [blame] | 169 | u32 bsp_apicid = 0, val, wants_reset; |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 170 | msr_t msr; |
| 171 | |
Timothy Pearson | 91e9f67 | 2015-03-19 16:44:46 -0500 | [diff] [blame] | 172 | timestamp_init(timestamp_get()); |
| 173 | timestamp_add_now(TS_START_ROMSTAGE); |
| 174 | |
Patrick Georgi | 2bd9100 | 2010-03-18 16:46:50 +0000 | [diff] [blame] | 175 | if (!cpu_init_detectedx && boot_cpu()) { |
Patrick Georgi | ce6fb1e | 2010-03-17 22:44:39 +0000 | [diff] [blame] | 176 | /* Nothing special needs to be done to find bus 0 */ |
| 177 | /* Allow the HT devices to be found */ |
Patrick Georgi | ce6fb1e | 2010-03-17 22:44:39 +0000 | [diff] [blame] | 178 | set_bsp_node_CHtExtNodeCfgEn(); |
| 179 | enumerate_ht_chain(); |
Patrick Georgi | ce6fb1e | 2010-03-17 22:44:39 +0000 | [diff] [blame] | 180 | sio_setup(); |
Patrick Georgi | ce6fb1e | 2010-03-17 22:44:39 +0000 | [diff] [blame] | 181 | } |
| 182 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 183 | post_code(0x30); |
Stefan Reinauer | 14e2277 | 2010-04-27 06:56:47 +0000 | [diff] [blame] | 184 | |
Uwe Hermann | 7b99705 | 2010-11-21 22:47:22 +0000 | [diff] [blame] | 185 | if (bist == 0) |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 186 | bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 187 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 188 | post_code(0x32); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 189 | |
Edward O'Callaghan | beb0f26 | 2014-04-29 13:09:50 +1000 | [diff] [blame] | 190 | w83627hf_set_clksel_48(DUMMY_DEV); |
| 191 | winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 192 | |
Knut Kujat | f7f9e92 | 2010-03-13 12:54:58 +0000 | [diff] [blame] | 193 | console_init(); |
| 194 | write_GPIO(); |
Stefan Reinauer | c02b4fc | 2010-03-22 11:42:32 +0000 | [diff] [blame] | 195 | printk(BIOS_DEBUG, "\n"); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 196 | |
| 197 | /* Halt if there was a built in self test failure */ |
| 198 | report_bist_failure(bist); |
| 199 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 200 | val = cpuid_eax(1); |
| 201 | printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val); |
| 202 | printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1); |
| 203 | printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid); |
| 204 | printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 205 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 206 | /* Setup sysinfo defaults */ |
| 207 | set_sysinfo_in_ram(0); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 208 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 209 | update_microcode(val); |
Kyösti Mälkki | f0a13ce | 2013-12-08 07:20:48 +0200 | [diff] [blame] | 210 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 211 | post_code(0x33); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 212 | |
Timothy Pearson | 730a043 | 2015-10-16 13:51:51 -0500 | [diff] [blame^] | 213 | cpuSetAMDMSR(0); |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 214 | post_code(0x34); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 215 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 216 | amd_ht_init(sysinfo); |
| 217 | post_code(0x35); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 218 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 219 | /* Setup nodes PCI space and start core 0 AP init. */ |
| 220 | finalize_node_setup(sysinfo); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 221 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 222 | /* Setup any mainboard PCI settings etc. */ |
| 223 | setup_mb_resource_map(); |
| 224 | post_code(0x36); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 225 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 226 | /* wait for all the APs core0 started by finalize_node_setup. */ |
| 227 | /* FIXME: A bunch of cores are going to start output to serial at once. |
| 228 | * It would be nice to fixup prink spinlocks for ROM XIP mode. |
| 229 | * I think it could be done by putting the spinlock flag in the cache |
| 230 | * of the BSP located right after sysinfo. |
| 231 | */ |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 232 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 233 | wait_all_core0_started(); |
Patrick Georgi | e166782 | 2012-05-05 15:29:32 +0200 | [diff] [blame] | 234 | #if CONFIG_LOGICAL_CPUS |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 235 | /* Core0 on each node is configured. Now setup any additional cores. */ |
| 236 | printk(BIOS_DEBUG, "start_other_cores()\n"); |
| 237 | start_other_cores(); |
| 238 | post_code(0x37); |
| 239 | wait_all_other_cores_started(bsp_apicid); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 240 | #endif |
| 241 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 242 | post_code(0x38); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 243 | |
Patrick Georgi | 76e8152 | 2010-11-16 21:25:29 +0000 | [diff] [blame] | 244 | #if CONFIG_SET_FIDVID |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 245 | msr = rdmsr(0xc0010071); |
| 246 | printk(BIOS_DEBUG, "\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 247 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 248 | /* FIXME: The sb fid change may survive the warm reset and only |
| 249 | * need to be done once.*/ |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 250 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 251 | enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn); |
| 252 | post_code(0x39); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 253 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 254 | if (!warm_reset_detect(0)) { // BSP is node 0 |
| 255 | init_fidvid_bsp(bsp_apicid, sysinfo->nodes); |
| 256 | } else { |
| 257 | init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0 |
| 258 | } |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 259 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 260 | post_code(0x3A); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 261 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 262 | /* show final fid and vid */ |
| 263 | msr=rdmsr(0xc0010071); |
| 264 | printk(BIOS_DEBUG, "End FIDVIDMSR 0xc0010071 0x%08x 0x%08x\n", msr.hi, msr.lo); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 265 | #endif |
| 266 | |
Paul Menzel | 4549e5a | 2014-02-02 22:05:48 +0100 | [diff] [blame] | 267 | init_timer(); // Need to use TMICT to synchronize FID/VID |
Stefan Reinauer | bcb8c97 | 2010-04-25 18:06:32 +0000 | [diff] [blame] | 268 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 269 | wants_reset = mcp55_early_setup_x(); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 270 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 271 | /* Reset for HT, FIDVID, PLL and errata changes to take affect. */ |
| 272 | if (!warm_reset_detect(0)) { |
| 273 | printk(BIOS_INFO, "...WARM RESET...\n\n\n"); |
| 274 | soft_reset(); |
| 275 | die("After soft_reset_x - shouldn't see this message!!!\n"); |
| 276 | } |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 277 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 278 | if (wants_reset) |
| 279 | printk(BIOS_DEBUG, "mcp55_early_setup_x wanted additional reset!\n"); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 280 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 281 | post_code(0x3B); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 282 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 283 | /* It's the time to set ctrl in sysinfo now; */ |
| 284 | printk(BIOS_DEBUG, "fill_mem_ctrl()\n"); |
| 285 | fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 286 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 287 | post_code(0x3D); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 288 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 289 | // printk(BIOS_DEBUG, "enable_smbus()\n"); |
| 290 | // enable_smbus(); /* enable in sio_setup */ |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 291 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 292 | post_code(0x40); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 293 | |
Timothy Pearson | 91e9f67 | 2015-03-19 16:44:46 -0500 | [diff] [blame] | 294 | timestamp_add_now(TS_BEFORE_INITRAM); |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 295 | printk(BIOS_DEBUG, "raminit_amdmct()\n"); |
| 296 | raminit_amdmct(sysinfo); |
Timothy Pearson | 91e9f67 | 2015-03-19 16:44:46 -0500 | [diff] [blame] | 297 | timestamp_add_now(TS_AFTER_INITRAM); |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 298 | cbmem_initialize_empty(); |
| 299 | post_code(0x41); |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 300 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 301 | amdmct_cbmem_store_info(sysinfo); |
Timothy Pearson | 2256408 | 2015-03-27 22:49:18 -0500 | [diff] [blame] | 302 | |
Timothy Pearson | a73dcbe | 2015-03-31 11:54:03 -0500 | [diff] [blame] | 303 | post_cache_as_ram(); /* BSP switch stack to ram, copy then execute CB. */ |
| 304 | post_code(0x42); /* Should never see this post code. */ |
Knut Kujat | 081c897 | 2010-02-03 16:04:40 +0000 | [diff] [blame] | 305 | } |
Scott Duplichan | 314dd0b | 2011-03-08 23:01:46 +0000 | [diff] [blame] | 306 | |
| 307 | /** |
| 308 | * BOOL AMD_CB_ManualBUIDSwapList(u8 Node, u8 Link, u8 **List) |
| 309 | * Description: |
| 310 | * This routine is called every time a non-coherent chain is processed. |
| 311 | * BUID assignment may be controlled explicitly on a non-coherent chain. Provide a |
| 312 | * swap list. The first part of the list controls the BUID assignment and the |
| 313 | * second part of the list provides the device to device linking. Device orientation |
| 314 | * can be detected automatically, or explicitly. See documentation for more details. |
| 315 | * |
| 316 | * Automatic non-coherent init assigns BUIDs starting at 1 and incrementing sequentially |
| 317 | * based on each device's unit count. |
| 318 | * |
| 319 | * Parameters: |
Martin Roth | c3fde7e | 2014-12-29 22:13:37 -0700 | [diff] [blame] | 320 | * @param[in] node = The node on which this chain is located |
| 321 | * @param[in] link = The link on the host for this chain |
| 322 | * @param[out] List = supply a pointer to a list |
Scott Duplichan | 314dd0b | 2011-03-08 23:01:46 +0000 | [diff] [blame] | 323 | */ |
| 324 | BOOL AMD_CB_ManualBUIDSwapList (u8 node, u8 link, const u8 **List) |
| 325 | { |
| 326 | static const u8 swaplist[] = { 0xFF, CONFIG_HT_CHAIN_UNITID_BASE, CONFIG_HT_CHAIN_END_UNITID_BASE, 0xFF }; |
| 327 | /* If the BUID was adjusted in early_ht we need to do the manual override */ |
| 328 | if ((CONFIG_HT_CHAIN_UNITID_BASE != 0) && (CONFIG_HT_CHAIN_END_UNITID_BASE != 0)) { |
| 329 | printk(BIOS_DEBUG, "AMD_CB_ManualBUIDSwapList()\n"); |
| 330 | if ((node == 0) && (link == 0)) { /* BSP SB link */ |
| 331 | *List = swaplist; |
| 332 | return 1; |
| 333 | } |
| 334 | } |
| 335 | |
| 336 | return 0; |
| 337 | } |