src/soc/intel/skylake/Kconfig

config SOC_INTEL_SKYLAKE
	bool
	help
	  Intel Skylake support

config SOC_INTEL_KABYLAKE
	bool
	default n
	select SOC_INTEL_SKYLAKE
	help
	  Intel Kabylake support

if SOC_INTEL_SKYLAKE

config CPU_SPECIFIC_OPTIONS
	def_bool y
	select ACPI_INTEL_HARDWARE_SLEEP_VALUES
	select ACPI_NHLT
	select ARCH_BOOTBLOCK_X86_32
	select ARCH_RAMSTAGE_X86_32
	select ARCH_ROMSTAGE_X86_32
	select ARCH_VERSTAGE_X86_32
	select BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if BOOT_DEVICE_SPI_FLASH
	select BOOT_DEVICE_SUPPORTS_WRITES
	select CACHE_MRC_SETTINGS
	select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM
	select COLLECT_TIMESTAMPS
	select COMMON_FADT
	select CPU_INTEL_FIRMWARE_INTERFACE_TABLE
	select C_ENVIRONMENT_BOOTBLOCK
	select FSP_M_XIP if MAINBOARD_USES_FSP2_0
	select FSP_T_XIP if FSP_CAR
	select GENERIC_GPIO_LIB
	select HAVE_FSP_GOP
	select INTEL_DESCRIPTOR_MODE_CAPABLE
	select HAVE_MONOTONIC_TIMER
	select HAVE_SMI_HANDLER
	select INTEL_CAR_NEM_ENHANCED
	select INTEL_GMA_ACPI
	select IOAPIC
	select MRC_SETTINGS_PROTECT
	select NO_FIXED_XIP_ROM_SIZE
	select PARALLEL_MP
	select PARALLEL_MP_AP_WORK
	select PCIEX_LENGTH_64MB
	select REG_SCRIPT
	select SA_ENABLE_DPR
	select SMM_TSEG
	select SMP
	select PMC_GLOBAL_RESET_ENABLE_LOCK
	select SOC_INTEL_COMMON
	select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE
	select SOC_INTEL_COMMON_BLOCK
	select SOC_INTEL_COMMON_BLOCK_CAR
	select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG
	select SOC_INTEL_COMMON_BLOCK_CPU
	select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT
	select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT
	select SOC_INTEL_COMMON_BLOCK_GPIO_LEGACY_MACROS
	select SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL
	select SOC_INTEL_COMMON_BLOCK_GSPI
	select SOC_INTEL_COMMON_BLOCK_HDA
	select SOC_INTEL_COMMON_BLOCK_SA
	select SOC_INTEL_COMMON_BLOCK_SGX
	select SOC_INTEL_COMMON_BLOCK_SMM
	select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP
	select SOC_INTEL_COMMON_BLOCK_UART
	select SOC_INTEL_COMMON_BLOCK_VMX
	select SOC_INTEL_COMMON_PCH_BASE
	select SOC_INTEL_COMMON_NHLT
	select SOC_INTEL_COMMON_RESET
	select SSE2
	select SUPPORT_CPU_UCODE_IN_CBFS
	select TSC_CONSTANT_RATE
	select TSC_MONOTONIC_TIMER
	select TSC_SYNC_MFENCE
	select UDELAY_TSC

config CPU_INTEL_NUM_FIT_ENTRIES
	int
	default 10

config MAINBOARD_USES_FSP2_0
	bool
	default n

config USE_FSP2_0_DRIVER
	def_bool y
	depends on MAINBOARD_USES_FSP2_0
	select PLATFORM_USES_FSP2_0
	select UDK_2015_BINDING
	select INTEL_GMA_ADD_VBT if RUN_FSP_GOP
	select POSTCAR_CONSOLE
	select POSTCAR_STAGE

config USE_FSP1_1_DRIVER
	def_bool y
	depends on !MAINBOARD_USES_FSP2_0
	select PLATFORM_USES_FSP1_1
	select DISPLAY_FSP_ENTRY_POINTS
	select SKIP_FSP_CAR

config CHROMEOS
	select CHROMEOS_RAMOOPS_DYNAMIC

config VBOOT
	select VBOOT_EC_SLOW_UPDATE if VBOOT_EC_SOFTWARE_SYNC
	select VBOOT_SEPARATE_VERSTAGE
	select VBOOT_OPROM_MATTERS
	select VBOOT_SAVE_RECOVERY_REASON_ON_REBOOT
	select VBOOT_STARTS_IN_BOOTBLOCK
	select VBOOT_VBNV_CMOS
	select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH

config CBFS_SIZE
	hex
	default 0x200000

config CPU_ADDR_BITS
	int
	default 36

config DCACHE_RAM_BASE
	hex
	default 0xfef00000

config DCACHE_RAM_SIZE
	hex
	default 0x40000
	help
	  The size of the cache-as-ram region required during bootblock
	  and/or romstage.

config DCACHE_BSP_STACK_SIZE
	hex
	default 0x4000
	help
	  The amount of anticipated stack usage in CAR by bootblock and
	  other stages.

config C_ENV_BOOTBLOCK_SIZE
	hex
	default 0xC000

config EXCLUDE_NATIVE_SD_INTERFACE
	bool
	default n
	help
	  If you set this option to n, will not use native SD controller.

config HEAP_SIZE
	hex
	default 0x80000

config IED_REGION_SIZE
	hex
	default 0x400000

config PCR_BASE_ADDRESS
	hex
	default 0xfd000000
	help
	  This option allows you to select MMIO Base Address of sideband bus.

config SERIRQ_CONTINUOUS_MODE
	bool
	default n
	help
	  If you set this option to y, the serial IRQ machine will be
	  operated in continuous mode.

config SMM_RESERVED_SIZE
	hex
	default 0x200000

config SMM_TSEG_SIZE
	hex
	default 0x800000

config VGA_BIOS_ID
	string
	default "8086,0406"

config SKYLAKE_SOC_PCH_H
	bool
	default n
	help
	  Choose this option if you have a PCH-H chipset.

config NHLT_DMIC_2CH
	bool
	default n
	help
	  Include DSP firmware settings for 2 channel DMIC array.

config NHLT_DMIC_4CH
	bool
	default n
	help
	  Include DSP firmware settings for 4 channel DMIC array.

config NHLT_NAU88L25
	bool
	default n
	help
	  Include DSP firmware settings for nau88l25 headset codec.

config NHLT_MAX98357
	bool
	default n
	help
	  Include DSP firmware settings for max98357 amplifier.

config NHLT_MAX98373
	bool
	default n
	help
	  Include DSP firmware settings for max98373 amplifier.

config NHLT_SSM4567
	bool
	default n
	help
	  Include DSP firmware settings for ssm4567 smart amplifier.

config NHLT_RT5514
	bool
	default n
	help
	  Include DSP firmware settings for rt5514 DSP.

config NHLT_RT5663
	bool
	default n
	help
	  Include DSP firmware settings for rt5663 headset codec.

config NHLT_MAX98927
	bool
	default n
	help
	  Include DSP firmware settings for max98927 amplifier.

config NHLT_DA7219
	bool
	default n
	help
	  Include DSP firmware settings for DA7219 headset codec.

config FSP_HEADER_PATH
	string "Location of FSP headers"
	depends on MAINBOARD_USES_FSP2_0
	# Use KabylakeFsp for both Skylake and Kabylake as it supports both.
	# SkylakeFsp is FSP 1.1 and therefore incompatible.
	default "3rdparty/fsp/KabylakeFspBinPkg/Include/" if SOC_INTEL_SKYLAKE
	default "3rdparty/fsp/KabylakeFspBinPkg/Include/" if SOC_INTEL_KABYLAKE

config FSP_FD_PATH
	string
	depends on FSP_USE_REPO
	default "3rdparty/fsp/KabylakeFspBinPkg/Fsp.fd" if SOC_INTEL_SKYLAKE
	default "3rdparty/fsp/KabylakeFspBinPkg/Fsp.fd" if SOC_INTEL_KABYLAKE

config SPI_FLASH_INCLUDE_ALL_DRIVERS
	bool
	default n

config MAX_ROOT_PORTS
	int
	default 24 if PLATFORM_USES_FSP2_0
	default 20 if PLATFORM_USES_FSP1_1

config NO_FADT_8042
	bool
	default n
	help
	  Choose this option if you want to disable 8042 Keyboard

config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ
	int
	default 120

config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
	int
	default SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ

config SOC_INTEL_COMMON_BLOCK_GSPI_MAX
	int
	default 2

config SOC_INTEL_I2C_DEV_MAX
	int
	default 6

config CPU_BCLK_MHZ
	int
	default 100

# Clock divider parameters for 115200 baud rate
config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL
	hex
	default 0x30

config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL
	hex
	default 0xc35

config IFD_CHIPSET
	string
	default "sklkbl"

endif