src/cpu/intel/model_206ax/model_206ax_init.c

/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */

#include <console/console.h>
#include <device/device.h>
#include <arch/acpi.h>
#include <arch/cpu.h>
#include <cpu/cpu.h>
#include <cpu/x86/mtrr.h>
#include <cpu/x86/msr.h>
#include <cpu/x86/lapic.h>
#include <cpu/x86/mp.h>
#include <cpu/intel/microcode.h>
#include <cpu/intel/speedstep.h>
#include <cpu/intel/turbo.h>
#include <cpu/x86/cache.h>
#include <cpu/x86/name.h>
#include "model_206ax.h"
#include "chip.h"
#include <cpu/intel/smm_reloc.h>
#include <cpu/intel/common/common.h>

/*
 * List of supported C-states in this processor
 *
 * Latencies are typical worst-case package exit time in uS
 * taken from the SandyBridge BIOS specification.
 */
static acpi_cstate_t cstate_map[] = {
	{	/* 0: C0 */
	}, {	/* 1: C1 */
		.latency = 1,
		.power = 1000,
		.resource = {
			.addrl = 0x00,	/* MWAIT State 0 */
			.space_id = ACPI_ADDRESS_SPACE_FIXED,
			.bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
			.bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
			.access_size = ACPI_FFIXEDHW_FLAG_HW_COORD,
		}
	},
	{	/* 2: C1E */
		.latency = 1,
		.power = 1000,
		.resource = {
			.addrl = 0x01,	/* MWAIT State 0 Sub-state 1 */
			.space_id = ACPI_ADDRESS_SPACE_FIXED,
			.bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
			.bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
			.access_size = ACPI_FFIXEDHW_FLAG_HW_COORD,
		}
	},
	{	/* 3: C3 */
		.latency = 63,
		.power = 500,
		.resource = {
			.addrl = 0x10,	/* MWAIT State 1 */
			.space_id = ACPI_ADDRESS_SPACE_FIXED,
			.bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
			.bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
			.access_size = ACPI_FFIXEDHW_FLAG_HW_COORD,
		}
	},
	{	/* 4: C6 */
		.latency = 87,
		.power = 350,
		.resource = {
			.addrl = 0x20,	/* MWAIT State 2 */
			.space_id = ACPI_ADDRESS_SPACE_FIXED,
			.bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
			.bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
			.access_size = ACPI_FFIXEDHW_FLAG_HW_COORD,
		}
	},
	{	/* 5: C7 */
		.latency = 90,
		.power = 200,
		.resource = {
			.addrl = 0x30,	/* MWAIT State 3 */
			.space_id = ACPI_ADDRESS_SPACE_FIXED,
			.bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
			.bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
			.access_size = ACPI_FFIXEDHW_FLAG_HW_COORD,
		}
	},
	{	/* 6: C7S */
		.latency = 90,
		.power = 200,
		.resource = {
			.addrl = 0x31,	/* MWAIT State 3 Sub-state 1 */
			.space_id = ACPI_ADDRESS_SPACE_FIXED,
			.bit_width = ACPI_FFIXEDHW_VENDOR_INTEL,
			.bit_offset = ACPI_FFIXEDHW_CLASS_MWAIT,
			.access_size = ACPI_FFIXEDHW_FLAG_HW_COORD,
		}
	},
	{ 0 }
};

/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */
static const u8 power_limit_time_sec_to_msr[] = {
	[0]   = 0x00,
	[1]   = 0x0a,
	[2]   = 0x0b,
	[3]   = 0x4b,
	[4]   = 0x0c,
	[5]   = 0x2c,
	[6]   = 0x4c,
	[7]   = 0x6c,
	[8]   = 0x0d,
	[10]  = 0x2d,
	[12]  = 0x4d,
	[14]  = 0x6d,
	[16]  = 0x0e,
	[20]  = 0x2e,
	[24]  = 0x4e,
	[28]  = 0x6e,
	[32]  = 0x0f,
	[40]  = 0x2f,
	[48]  = 0x4f,
	[56]  = 0x6f,
	[64]  = 0x10,
	[80]  = 0x30,
	[96]  = 0x50,
	[112] = 0x70,
	[128] = 0x11,
};

/* Convert POWER_LIMIT_1_TIME MSR value to seconds */
static const u8 power_limit_time_msr_to_sec[] = {
	[0x00] = 0,
	[0x0a] = 1,
	[0x0b] = 2,
	[0x4b] = 3,
	[0x0c] = 4,
	[0x2c] = 5,
	[0x4c] = 6,
	[0x6c] = 7,
	[0x0d] = 8,
	[0x2d] = 10,
	[0x4d] = 12,
	[0x6d] = 14,
	[0x0e] = 16,
	[0x2e] = 20,
	[0x4e] = 24,
	[0x6e] = 28,
	[0x0f] = 32,
	[0x2f] = 40,
	[0x4f] = 48,
	[0x6f] = 56,
	[0x10] = 64,
	[0x30] = 80,
	[0x50] = 96,
	[0x70] = 112,
	[0x11] = 128,
};

int cpu_config_tdp_levels(void)
{
	msr_t platform_info;

	/* Minimum CPU revision */
	if (cpuid_eax(1) < IVB_CONFIG_TDP_MIN_CPUID)
		return 0;

	/* Bits 34:33 indicate how many levels supported */
	platform_info = rdmsr(MSR_PLATFORM_INFO);
	return (platform_info.hi >> 1) & 3;
}

/*
 * Configure processor power limits if possible
 * This must be done AFTER set of BIOS_RESET_CPL
 */
void set_power_limits(u8 power_limit_1_time)
{
	msr_t msr = rdmsr(MSR_PLATFORM_INFO);
	msr_t limit;
	unsigned int power_unit;
	unsigned int tdp, min_power, max_power, max_time;
	u8 power_limit_1_val;

	if (power_limit_1_time >= ARRAY_SIZE(power_limit_time_sec_to_msr))
		return;

	if (!(msr.lo & PLATFORM_INFO_SET_TDP))
		return;

	/* Get units */
	msr = rdmsr(MSR_PKG_POWER_SKU_UNIT);
	power_unit = 2 << ((msr.lo & 0xf) - 1);

	/* Get power defaults for this SKU */
	msr = rdmsr(MSR_PKG_POWER_SKU);
	tdp = msr.lo & 0x7fff;
	min_power = (msr.lo >> 16) & 0x7fff;
	max_power = msr.hi & 0x7fff;
	max_time = (msr.hi >> 16) & 0x7f;

	printk(BIOS_DEBUG, "CPU TDP: %u Watts\n", tdp / power_unit);

	if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time)
		power_limit_1_time = power_limit_time_msr_to_sec[max_time];

	if (min_power > 0 && tdp < min_power)
		tdp = min_power;

	if (max_power > 0 && tdp > max_power)
		tdp = max_power;

	power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time];

	/* Set long term power limit to TDP */
	limit.lo = 0;
	limit.lo |= tdp & PKG_POWER_LIMIT_MASK;
	limit.lo |= PKG_POWER_LIMIT_EN;
	limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) <<
		PKG_POWER_LIMIT_TIME_SHIFT;

	/* Set short term power limit to 1.25 * TDP */
	limit.hi = 0;
	limit.hi |= ((tdp * 125) / 100) & PKG_POWER_LIMIT_MASK;
	limit.hi |= PKG_POWER_LIMIT_EN;
	/* Power limit 2 time is only programmable on SNB EP/EX */

	wrmsr(MSR_PKG_POWER_LIMIT, limit);

	/* Use nominal TDP values for CPUs with configurable TDP */
	if (cpu_config_tdp_levels()) {
		msr = rdmsr(MSR_CONFIG_TDP_NOMINAL);
		limit.hi = 0;
		limit.lo = msr.lo & 0xff;
		wrmsr(MSR_TURBO_ACTIVATION_RATIO, limit);
	}
}

static void configure_c_states(void)
{
	msr_t msr;

	msr = rdmsr(MSR_PKG_CST_CONFIG_CONTROL);
	msr.lo |= (1 << 28);	// C1 Auto Undemotion Enable
	msr.lo |= (1 << 27);	// C3 Auto Undemotion Enable
	msr.lo |= (1 << 26);	// C1 Auto Demotion Enable
	msr.lo |= (1 << 25);	// C3 Auto Demotion Enable
	msr.lo &= ~(1 << 10);	// Disable IO MWAIT redirection
	msr.lo |= 7;		// No package C-state limit

	msr.lo |= (1 << 15);	// Lock C-State MSR
	wrmsr(MSR_PKG_CST_CONFIG_CONTROL, msr);

	msr = rdmsr(MSR_PMG_IO_CAPTURE_ADDR);
	msr.lo &= ~0x7ffff;
	msr.lo |= (PMB0_BASE + 4);	// LVL_2 base address
	msr.lo |= (2 << 16);		// CST Range: C7 is max C-state
	wrmsr(MSR_PMG_IO_CAPTURE_ADDR, msr);

	msr = rdmsr(MSR_MISC_PWR_MGMT);
	msr.lo &= ~(1 << 0);	// Enable P-state HW_ALL coordination
	wrmsr(MSR_MISC_PWR_MGMT, msr);

	msr = rdmsr(MSR_POWER_CTL);
	msr.lo |= (1 << 18);	// Enable Energy Perf Bias MSR 0x1b0
	msr.lo |= (1 << 1);	// C1E Enable
	msr.lo |= (1 << 0);	// Bi-directional PROCHOT#
	wrmsr(MSR_POWER_CTL, msr);

	/* C3 Interrupt Response Time Limit */
	msr.hi = 0;
	msr.lo = IRTL_VALID | IRTL_1024_NS | 0x50;
	wrmsr(MSR_PKGC3_IRTL, msr);

	/* C6 Interrupt Response Time Limit */
	msr.hi = 0;
	msr.lo = IRTL_VALID | IRTL_1024_NS | 0x68;
	wrmsr(MSR_PKGC6_IRTL, msr);

	/* C7 Interrupt Response Time Limit */
	msr.hi = 0;
	msr.lo = IRTL_VALID | IRTL_1024_NS | 0x6D;
	wrmsr(MSR_PKGC7_IRTL, msr);

	/* Primary Plane Current Limit */
	msr = rdmsr(MSR_PP0_CURRENT_CONFIG);
	msr.lo &= ~0x1fff;
	msr.lo |= PP0_CURRENT_LIMIT;
	wrmsr(MSR_PP0_CURRENT_CONFIG, msr);

	/* Secondary Plane Current Limit */
	msr = rdmsr(MSR_PP1_CURRENT_CONFIG);
	msr.lo &= ~0x1fff;
	if (cpuid_eax(1) >= 0x30600)
		msr.lo |= PP1_CURRENT_LIMIT_IVB;
	else
		msr.lo |= PP1_CURRENT_LIMIT_SNB;
	wrmsr(MSR_PP1_CURRENT_CONFIG, msr);
}

static void configure_thermal_target(void)
{
	struct cpu_intel_model_206ax_config *conf;
	struct device *lapic;
	msr_t msr;

	/* Find pointer to CPU configuration */
	lapic = dev_find_lapic(SPEEDSTEP_APIC_MAGIC);
	if (!lapic || !lapic->chip_info)
		return;
	conf = lapic->chip_info;

	/* Set TCC activation offset if supported */
	msr = rdmsr(MSR_PLATFORM_INFO);
	if ((msr.lo & (1 << 30)) && conf->tcc_offset) {
		msr = rdmsr(MSR_TEMPERATURE_TARGET);
		msr.lo &= ~(0xf << 24); /* Bits 27:24 */
		msr.lo |= (conf->tcc_offset & 0xf) << 24;
		wrmsr(MSR_TEMPERATURE_TARGET, msr);
	}
}

static void configure_misc(void)
{
	msr_t msr;

	msr = rdmsr(IA32_MISC_ENABLE);
	msr.lo |= (1 << 0);	  /* Fast String enable */
	msr.lo |= (1 << 3);	  /* TM1/TM2/EMTTM enable */
	msr.lo |= (1 << 16);	  /* Enhanced SpeedStep Enable */
	wrmsr(IA32_MISC_ENABLE, msr);

	/* Disable Thermal interrupts */
	msr.lo = 0;
	msr.hi = 0;
	wrmsr(IA32_THERM_INTERRUPT, msr);

	/* Enable package critical interrupt only */
	msr.lo = 1 << 4;
	msr.hi = 0;
	wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr);
}

static void enable_lapic_tpr(void)
{
	msr_t msr;

	msr = rdmsr(MSR_PIC_MSG_CONTROL);
	msr.lo &= ~(1 << 10);	/* Enable APIC TPR updates */
	wrmsr(MSR_PIC_MSG_CONTROL, msr);
}

static void configure_dca_cap(void)
{
	uint32_t feature_flag;
	msr_t msr;

	/* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */
	feature_flag = cpu_get_feature_flags_ecx();
	if (feature_flag & CPUID_DCA) {
		msr = rdmsr(IA32_PLATFORM_DCA_CAP);
		msr.lo |= 1;
		wrmsr(IA32_PLATFORM_DCA_CAP, msr);
	}
}

static void set_max_ratio(void)
{
	msr_t msr, perf_ctl;

	perf_ctl.hi = 0;

	/* Check for configurable TDP option */
	if (cpu_config_tdp_levels()) {
		/* Set to nominal TDP ratio */
		msr = rdmsr(MSR_CONFIG_TDP_NOMINAL);
		perf_ctl.lo = (msr.lo & 0xff) << 8;
	} else {
		/* Platform Info bits 15:8 give max ratio */
		msr = rdmsr(MSR_PLATFORM_INFO);
		perf_ctl.lo = msr.lo & 0xff00;
	}
	wrmsr(IA32_PERF_CTL, perf_ctl);

	printk(BIOS_DEBUG, "model_x06ax: frequency set to %d\n",
	       ((perf_ctl.lo >> 8) & 0xff) * SANDYBRIDGE_BCLK);
}

static void set_energy_perf_bias(u8 policy)
{
	msr_t msr;

	/* Energy Policy is bits 3:0 */
	msr = rdmsr(IA32_ENERGY_PERF_BIAS);
	msr.lo &= ~0xf;
	msr.lo |= policy & 0xf;
	wrmsr(IA32_ENERGY_PERF_BIAS, msr);

	printk(BIOS_DEBUG, "model_x06ax: energy policy set to %u\n",
	       policy);
}

static void configure_mca(void)
{
	msr_t msr;
	int i;
	int num_banks;

	msr = rdmsr(IA32_MCG_CAP);
	num_banks = msr.lo & 0xff;

	msr.lo = msr.hi = 0;
	/* This should only be done on a cold boot */
	for (i = 0; i < num_banks; i++)
		wrmsr(IA32_MC0_STATUS + (i * 4), msr);
}

static void model_206ax_report(void)
{
	static const char *const mode[] = {"NOT ", ""};
	char processor_name[49];
	int vt, txt, aes;
	uint32_t cpu_id, cpu_feature_flag;

	/* Print processor name */
	fill_processor_name(processor_name);
	printk(BIOS_INFO, "CPU: %s.\n", processor_name);

	/* Print platform ID */
	printk(BIOS_INFO, "CPU: platform id %x\n", get_platform_id());

	/* CPUID and features */
	cpu_id = cpu_get_cpuid();
	printk(BIOS_INFO, "CPU: cpuid(1) 0x%x\n", cpu_id);

	cpu_feature_flag = cpu_get_feature_flags_ecx();
	aes = (cpu_feature_flag & CPUID_AES) ? 1 : 0;
	txt = (cpu_feature_flag & CPUID_SMX) ? 1 : 0;
	vt = (cpu_feature_flag & CPUID_VMX) ? 1 : 0;
	printk(BIOS_INFO, "CPU: AES %ssupported\n", mode[aes]);
	printk(BIOS_INFO, "CPU: TXT %ssupported\n", mode[txt]);
	printk(BIOS_INFO, "CPU: VT %ssupported\n", mode[vt]);
}

static void model_206ax_init(struct device *cpu)
{

	/* Turn on caching if we haven't already */
	x86_enable_cache();

	/* Clear out pending MCEs */
	configure_mca();

	/* Print infos */
	model_206ax_report();

	/* Setup Page Attribute Tables (PAT) */
	// TODO set up PAT

	/* Enable the local CPU APICs */
	enable_lapic_tpr();
	setup_lapic();

	/* Set virtualization based on Kconfig option */
	set_vmx_and_lock();

	/* Configure C States */
	configure_c_states();

	/* Configure Enhanced SpeedStep and Thermal Sensors */
	configure_misc();

	/* Thermal throttle activation offset */
	configure_thermal_target();

	/* Enable Direct Cache Access */
	configure_dca_cap();

	/* Set energy policy */
	set_energy_perf_bias(ENERGY_POLICY_NORMAL);

	/* Set Max Ratio */
	set_max_ratio();

	/* Enable Turbo */
	enable_turbo();
}

/* MP initialization support. */
static const void *microcode_patch;

static void pre_mp_init(void)
{
	/* Setup MTRRs based on physical address size. */
	x86_setup_mtrrs_with_detect();
	x86_mtrr_check();
}

static int get_cpu_count(void)
{
	msr_t msr;
	int num_threads;
	int num_cores;

	msr = rdmsr(MSR_CORE_THREAD_COUNT);
	num_threads = (msr.lo >> 0) & 0xffff;
	num_cores = (msr.lo >> 16) & 0xffff;
	printk(BIOS_DEBUG, "CPU has %u cores, %u threads enabled.\n",
	       num_cores, num_threads);

	return num_threads;
}

static void get_microcode_info(const void **microcode, int *parallel)
{
	microcode_patch = intel_microcode_find();
	*microcode = microcode_patch;
	*parallel = 1;
}

static void per_cpu_smm_trigger(void)
{
	/* Relocate the SMM handler. */
	smm_relocate();

	/* After SMM relocation a 2nd microcode load is required. */
	intel_microcode_load_unlocked(microcode_patch);
}

static void post_mp_init(void)
{
	/* Now that all APs have been relocated as well as the BSP let SMIs
	 * start flowing. */
	smm_southbridge_enable_smi();

	/* Lock down the SMRAM space. */
	smm_lock();
}


static const struct mp_ops mp_ops = {
	.pre_mp_init = pre_mp_init,
	.get_cpu_count = get_cpu_count,
	.get_smm_info = smm_info,
	.get_microcode_info = get_microcode_info,
	.pre_mp_smm_init = smm_initialize,
	.per_cpu_smm_trigger = per_cpu_smm_trigger,
	.relocation_handler = smm_relocation_handler,
	.post_mp_init = post_mp_init,
};

void mp_init_cpus(struct bus *cpu_bus)
{
	if (mp_init_with_smm(cpu_bus, &mp_ops))
		printk(BIOS_ERR, "MP initialization failure.\n");
}

static struct device_operations cpu_dev_ops = {
	.init     = model_206ax_init,
};

static const struct cpu_device_id cpu_table[] = {
	{ X86_VENDOR_INTEL, 0x206a0 }, /* Intel Sandybridge */
	{ X86_VENDOR_INTEL, 0x206a6 }, /* Intel Sandybridge D1 */
	{ X86_VENDOR_INTEL, 0x206a7 }, /* Intel Sandybridge D2/J1 */
	{ X86_VENDOR_INTEL, 0x306a0 }, /* Intel IvyBridge */
	{ X86_VENDOR_INTEL, 0x306a2 }, /* Intel IvyBridge */
	{ X86_VENDOR_INTEL, 0x306a4 }, /* Intel IvyBridge */
	{ X86_VENDOR_INTEL, 0x306a5 }, /* Intel IvyBridge */
	{ X86_VENDOR_INTEL, 0x306a6 }, /* Intel IvyBridge */
	{ X86_VENDOR_INTEL, 0x306a8 }, /* Intel IvyBridge */
	{ X86_VENDOR_INTEL, 0x306a9 }, /* Intel IvyBridge */
	{ 0, 0 },
};

static const struct cpu_driver driver __cpu_driver = {
	.ops      = &cpu_dev_ops,
	.id_table = cpu_table,
	.cstates  = cstate_map,
};