CPU: Add option to set TCC activation offset
The default TCC activation offset is 0, which means TCC
activation starts at Tj_max. For devices with limited
cooling ability it may be desired to lower TCC activation.
This adds an option that can be declared in the devicetree
to set the TCC activation to a non-zero value.
Enable tcc_offset=15 in devicetree.cb and build/boot
the BIOS and check that the value is set in the MSR:
> and $(shr $(rdmsr 0 0x1a2) 24) 0xf
0xf
Change-Id: I88f6857b40fd354f70fa9d5d9c1d8ceaea6dfcd1
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/1343
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
diff --git a/src/cpu/intel/model_206ax/model_206ax_init.c b/src/cpu/intel/model_206ax/model_206ax_init.c
index 70a655a6..2ad8012 100644
--- a/src/cpu/intel/model_206ax/model_206ax_init.c
+++ b/src/cpu/intel/model_206ax/model_206ax_init.c
@@ -37,6 +37,7 @@
#include <pc80/mc146818rtc.h>
#include <usbdebug.h>
#include "model_206ax.h"
+#include "chip.h"
/*
* List of suported C-states in this processor
@@ -312,6 +313,28 @@
wrmsr(MSR_PP1_CURRENT_CONFIG, msr);
}
+static void configure_thermal_target(void)
+{
+ struct cpu_intel_model_206ax_config *conf;
+ device_t lapic;
+ msr_t msr;
+
+ /* Find pointer to CPU configuration */
+ lapic = dev_find_lapic(SPEEDSTEP_APIC_MAGIC);
+ if (!lapic || !lapic->chip_info)
+ return;
+ conf = lapic->chip_info;
+
+ /* Set TCC activaiton offset if supported */
+ msr = rdmsr(MSR_PLATFORM_INFO);
+ if ((msr.lo & (1 << 30)) && conf->tcc_offset) {
+ msr = rdmsr(MSR_TEMPERATURE_TARGET);
+ msr.lo &= ~(0xf << 24); /* Bits 27:24 */
+ msr.lo |= (conf->tcc_offset & 0xf) << 24;
+ wrmsr(MSR_TEMPERATURE_TARGET, msr);
+ }
+}
+
static void configure_misc(void)
{
msr_t msr;
@@ -454,6 +477,9 @@
/* Configure Enhanced SpeedStep and Thermal Sensors */
configure_misc();
+ /* Thermal throttle activation offset */
+ configure_thermal_target();
+
/* Enable Direct Cache Access */
configure_dca_cap();