src/mainboard/intel/tglrvp/variants/tglrvp_up4/devicetree.cb

chip soc/intel/tigerlake

	# GPE configuration
	# Note that GPE events called out in ASL code rely on this
	# route. i.e. If this route changes then the affected GPE
	# offset bits also need to be changed.
	register "pmc_gpe0_dw0" = "GPP_B"
	register "pmc_gpe0_dw1" = "GPP_C"
	register "pmc_gpe0_dw2" = "GPP_D"

	# FSP configuration
	register "SaGv" = "SaGv_Disabled"

	# CNVi BT enable/disable
	register "CnviBtCore" = "true"

	# CPU replacement check
	register "CpuReplacementCheck" = "1"

	register "PcieRpSlotImplemented[2]" = "1"
	register "PcieRpSlotImplemented[3]" = "1"
	register "PcieRpSlotImplemented[8]" = "1"
	register "PcieRpSlotImplemented[10]" = "1"

	# Enable PR LTR
	register "PcieRpLtrEnable[2]" = "1"
	register "PcieRpLtrEnable[3]" = "1"
	register "PcieRpLtrEnable[8]" = "1"
	register "PcieRpLtrEnable[10]" = "1"

	# Hybrid storage mode
	register "HybridStorageMode" = "1"

	register "PcieClkSrcClkReq[1]" = "1"
	register "PcieClkSrcClkReq[2]" = "2"
	register "PcieClkSrcClkReq[3]" = "3"

	register "PcieClkSrcUsage[1]" = "0x2"
	register "PcieClkSrcUsage[2]" = "0x3"
	register "PcieClkSrcUsage[3]" = "0x8"

	# enabling EDP in PortA
	register "DdiPortAConfig" = "DDI_PORT_CFG_EDP"

	register "DdiPortAHpd" = "1"
	register "DdiPortADdc" = "0"
	register "DdiPortBHpd" = "1"
	register "DdiPortBDdc" = "1"
	register "DdiPortCHpd" = "0"
	register "DdiPortCDdc" = "0"
	register "DdiPort1Hpd" = "1"
	register "DdiPort1Ddc" = "0"
	register "DdiPort2Hpd" = "1"
	register "DdiPort2Ddc" = "0"

	register "SerialIoI2cMode" = "{
		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
		[PchSerialIoIndexI2C2]  = PchSerialIoPci,
		[PchSerialIoIndexI2C3]  = PchSerialIoPci,
		[PchSerialIoIndexI2C4]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C5]  = PchSerialIoPci,
	}"

	register "SerialIoGSpiMode" = "{
		[PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
		[PchSerialIoIndexGSPI1] = PchSerialIoPci,
		[PchSerialIoIndexGSPI2] = PchSerialIoDisabled,
		[PchSerialIoIndexGSPI3] = PchSerialIoDisabled,
	}"

	register "SerialIoGSpiCsMode" = "{
		[PchSerialIoIndexGSPI0] = 0,
		[PchSerialIoIndexGSPI1] = 1,
		[PchSerialIoIndexGSPI2] = 0,
		[PchSerialIoIndexGSPI3] = 0,
	}"

	register "SerialIoGSpiCsState" = "{
		[PchSerialIoIndexGSPI0] = 0,
		[PchSerialIoIndexGSPI1] = 0,
		[PchSerialIoIndexGSPI2] = 0,
		[PchSerialIoIndexGSPI3] = 0,
	}"

	register "SerialIoUartMode" = "{
		[PchSerialIoIndexUART0] = PchSerialIoDisabled,
		[PchSerialIoIndexUART1] = PchSerialIoDisabled,
		[PchSerialIoIndexUART2] = PchSerialIoPci,
	}"

	# TCSS USB3
	register "TcssXhciEn" = "1"
	register "TcssAuxOri" = "0"

	# Enable S0ix
	register "s0ix_enable" = "1"

	# Enable DPTF
	register "dptf_enable" = "1"

	# Add PL1 and PL2 values
	register "power_limits_config[POWER_LIMITS_U_2_CORE]" = "{
		.tdp_pl1_override = 9,
		.tdp_pl2_override = 35,
		.tdp_pl4 = 66,
	}"
	register "power_limits_config[POWER_LIMITS_U_4_CORE]" = "{
		.tdp_pl1_override = 9,
		.tdp_pl2_override = 40,
		.tdp_pl4 = 83,
	}"

	# Intel Common SoC Config
	register "common_soc_config" = "{
		.gspi[1] = {
			.speed_mhz = 1,
			.early_init = 1,
		},
		.i2c[0] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[1] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[2] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[3] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[5] = {
			.speed = I2C_SPEED_FAST,
		},
	}"

	device domain 0 on
		#From EDS(575683)
		device ref system_agent on  end
		device ref igpu on  end
		device ref dptf on
			# Default DPTF Policy for all tglrvp_up4 boards if not overridden
			chip drivers/intel/dptf
				register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 95, 1000)"
				register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 105, SHUTDOWN)"

				# Power Limits Control
				register "controls.power_limits.pl1" = "{
					.min_power = 3000,
					.max_power = 9000,
					.time_window_min = 28 * MSECS_PER_SEC,
					.time_window_max = 32 * MSECS_PER_SEC,
					.granularity = 200,}"
				register "controls.power_limits.pl2" = "{
					.min_power = 40000,
					.max_power = 40000,
					.time_window_min = 28 * MSECS_PER_SEC,
					.time_window_max = 32 * MSECS_PER_SEC,
					.granularity = 1000,}"
				device generic 0 on end
			end
		end

		device ref ipu on  end
		device ref peg on  end
		device ref tbt_pcie_rp0 on  end
		device ref tbt_pcie_rp1 on  end
		device ref tbt_pcie_rp2 on  end
		device ref tbt_pcie_rp3 off end
		device ref gna off end
		device ref npk off end
		device ref crashlog off end
		device ref north_xhci on  end
		device ref north_xdci on  end
		device ref tbt_dma0 on  end
		device ref tbt_dma1 on  end
		device ref vmd off end

		device ref thc0 off end
		device ref thc1 off end
		device ref ish on
			chip drivers/intel/ish
				register "firmware_name" = ""tglrvp_ish.bin""
				device generic 0 on end
			end
		end
		device ref gspi2 off end
		device ref gspi3 off end
		device ref south_xhci on
			register "usb2_ports" = "{
				[0] = USB2_PORT_MID(OC3),	// Type-C Port1
				[2] = USB2_PORT_MID(OC0),	// M.2 Bluetooth, USB3/2 Type A Port1
				[3] = USB2_PORT_MID(OC3),	// USB3/2 Type A Port 1
				[4] = USB2_PORT_MID(OC3),	// Type-C Port2
				[5] = USB2_PORT_MID(OC3),	// Type-C Port3 / MECC
				[9] = USB2_PORT_MID(OC3),	// CNVi/BT
			}"

			register "usb3_ports" = "{
				[0] = USB3_PORT_DEFAULT(OC0),	// USB3/2 Type A port1
				[1] = USB3_PORT_DEFAULT(OC0),	// USB3/2 Type A port2
				[3] = USB3_PORT_DEFAULT(OC3),	// USB3/USB2 Flex Connector
			}"
		end
		device ref south_xdci on  end
		device ref shared_ram on  end
		device ref cnvi_wifi on
			chip drivers/wifi/generic
				register "wake" = "GPE0_PME_B0"
				device generic 0 on end
			end
		end

		device ref i2c0 on
			chip drivers/i2c/generic
				register "hid" = ""10EC1308""
				register "name" = ""RTAM""
				register "desc" = ""Realtek RT1308 Codec""
				device i2c 10 on end
			end
			chip drivers/i2c/max98373
				register "vmon_slot_no" = "4"
				register "imon_slot_no" = "5"
				register "uid" = "0"
				register "desc" = ""RIGHT SPEAKER AMP""
				register "name" = ""MAXR""
				device i2c 31 on end
			end
			chip drivers/i2c/max98373
				register "vmon_slot_no" = "6"
				register "imon_slot_no" = "7"
				register "uid" = "1"
				register "desc" = ""LEFT SPEAKER AMP""
				register "name" = ""MAXL""
				device i2c 32 on end
			end
			chip drivers/i2c/generic
				register "hid" = ""10EC5682""
				register "name" = ""RT58""
				register "desc" = ""Realtek RT5682""
				register "irq" = "ACPI_IRQ_EDGE_HIGH(GPP_C12_IRQ)"
				register "probed" = "1"
				# Set the jd_src to RT5668_JD1 for jack detection
				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
				register "property_list[0].name" = ""realtek,jd-src""
				register "property_list[0].integer" = "1"
				device i2c 1a on end
			end
		end
		device ref i2c1 on  end
		device ref i2c2 on  end
		device ref i2c3 on  end
		device ref heci1 on  end
		device ref heci2 off end
		device ref csme1 off end
		device ref csme2 off end
		device ref heci3 off end
		device ref heci4 off end
		device ref sata on  end
		device ref i2c4 off end
		device ref i2c5 on  end
		device ref uart2 on  end
		device ref pcie_rp1 off end
		device ref pcie_rp2 off end
		device ref pcie_rp3 on  end
		device ref pcie_rp4 on
			chip soc/intel/common/block/pcie/rtd3
				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B17)"
				register "srcclk_pin" = "2"
				device generic 0 on end
			end
		end
		device ref pcie_rp5 off end
		device ref pcie_rp6 off end
		device ref pcie_rp7 off end
		device ref pcie_rp8 off end
		device ref pcie_rp9 on  end
		device ref pcie_rp10 off end
		device ref pcie_rp11 on  end
		device ref pcie_rp12 off end
		device ref uart0 off end
		device ref uart1 off end
		device ref gspi0 on end
		device ref gspi1 on
			chip drivers/spi/acpi
				register "hid" = "ACPI_DT_NAMESPACE_HID"
				register "compat_string" = ""google,cr50""
				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_C22_IRQ)"
				device spi 0 on end
			end
		end
		device ref pch_espi on
			# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
			register "gen1_dec" = "0x00fc0801"
			register "gen2_dec" = "0x000c0201"
			# EC memory map range is 0x900-0x9ff
			register "gen3_dec" = "0x00fc0901"

			chip ec/google/chromeec
				use conn0 as mux_conn[0]
				use conn1 as mux_conn[1]
				device pnp 0c09.0 on end
			end
		end
		device ref p2sb on  end
		device ref pmc hidden
			# The pmc_mux chip driver is a placeholder for the
			# PMC.MUX device in the ACPI hierarchy.
			chip drivers/intel/pmc_mux
				device generic 0 on
					chip drivers/intel/pmc_mux/conn
						use usb2_port6 as usb2_port
						use tcss_usb3_port3 as usb3_port
						# SBU is fixed, HSL follows CC
						register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
						device generic 0 alias conn0 on end
					end
					chip drivers/intel/pmc_mux/conn
						use usb2_port5 as usb2_port
						use tcss_usb3_port2 as usb3_port
						# SBU is fixed, HSL follows CC
						register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
						device generic 1 alias conn1 on end
					end
				end
			end
		end
		device ref hda on
			register "PchHdaDspEnable" = "1"
			register "PchHdaAudioLinkDmicEnable" = "{
				[0] = 1,
				[1] = 1,
			}"
			register "PchHdaAudioLinkSspEnable" = "{
				[0] = 1,
				[2] = 1,
			}"
			register "PchHdaAudioLinkSndwEnable[0]" = "1"
		end
		device ref smbus on  end
		device ref fast_spi on  end
		device ref gbe off end
		device ref tracehub off end
	end
end