src/mainboard/intel/tglrvp/variants/tglrvp_up4/devicetree.cb

chip soc/intel/tigerlake

	device cpu_cluster 0 on
		device lapic 0 on end
	end

	# GPE configuration
	# Note that GPE events called out in ASL code rely on this
	# route. i.e. If this route changes then the affected GPE
	# offset bits also need to be changed.
	register "pmc_gpe0_dw0" = "GPP_B"
	register "pmc_gpe0_dw1" = "GPP_D"
	register "pmc_gpe0_dw2" = "GPP_E"

	# FSP configuration
	register "SaGv" = "SaGv_Disabled"
	register "SmbusEnable" = "1"

	register "usb2_ports[0]" = "USB2_PORT_MID(OC3)"		# Type-C Port1
	register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)"	# M.2 WWAN
	register "usb2_ports[2]" = "USB2_PORT_MID(OC0)"		# M.2 Bluetooth, USB3/2 Type A port1
	register "usb2_ports[3]" = "USB2_PORT_MID(OC3)"		# USB3/2 Type A port1
	register "usb2_ports[4]" = "USB2_PORT_MID(OC3)"		# Type-C Port2
	register "usb2_ports[5]" = "USB2_PORT_MID(OC3)"		# Type-C Port3
	register "usb3_ports[6]" = "USB3_PORT_EMPTY"		# Not used
	register "usb3_ports[7]" = "USB3_PORT_EMPTY"		# Not used
	register "usb3_ports[8]" = "USB3_PORT_EMPTY"		# Not used
	register "usb2_ports[9]" = "USB2_PORT_MID(OC3)"		# CNVi/BT

	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"	# USB3/2 Type A port1
	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"	# USB3/2 Type A port2
	register "usb3_ports[2]" = "USB3_PORT_EMPTY"		# Not used
	register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)"	# USB3/USB2 Flex Connector

	# CPU replacement check
	register "CpuReplacementCheck" = "1"

	# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
	register "gen1_dec" = "0x00fc0801"
	register "gen2_dec" = "0x000c0201"
	# EC memory map range is 0x900-0x9ff
	register "gen3_dec" = "0x00fc0901"

	register "PcieRpEnable[2]" = "1"
	register "PcieRpEnable[3]" = "1"
	register "PcieRpEnable[8]" = "1"
	register "PcieRpEnable[10]" = "1"

	# Enable PR LTR
	register "PcieRpLtrEnable[2]" = "1"
	register "PcieRpLtrEnable[3]" = "1"
	register "PcieRpLtrEnable[8]" = "1"
	register "PcieRpLtrEnable[10]" = "1"

	# Hybrid storage mode
	register "HybridStorageMode" = "1"

	register "PcieClkSrcClkReq[1]" = "1"
	register "PcieClkSrcClkReq[2]" = "2"
	register "PcieClkSrcClkReq[3]" = "3"

	register "PcieClkSrcUsage[1]" = "0x2"
	register "PcieClkSrcUsage[2]" = "0x3"
	register "PcieClkSrcUsage[3]" = "0x8"

	# enabling EDP in PortA
	register "DdiPortAConfig" = "1"

	register "DdiPortBHpd" = "1"
	register "DdiPort1Hpd" = "1"
	register "DdiPort1Ddc" = "1"

	register "SerialIoI2cMode" = "{
		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
		[PchSerialIoIndexI2C2]  = PchSerialIoPci,
		[PchSerialIoIndexI2C3]  = PchSerialIoPci,
		[PchSerialIoIndexI2C4]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C5]  = PchSerialIoPci,
	}"

	register "SerialIoGSpiMode" = "{
		[PchSerialIoIndexGSPI0] = PchSerialIoDisabled,
		[PchSerialIoIndexGSPI1] = PchSerialIoDisabled,
		[PchSerialIoIndexGSPI2] = PchSerialIoDisabled,
		[PchSerialIoIndexGSPI3] = PchSerialIoDisabled,
	}"

	register "SerialIoGSpiCsMode" = "{
		[PchSerialIoIndexGSPI0] = 0,
		[PchSerialIoIndexGSPI1] = 0,
		[PchSerialIoIndexGSPI2] = 0,
		[PchSerialIoIndexGSPI3] = 0,
	}"

	register "SerialIoGSpiCsState" = "{
		[PchSerialIoIndexGSPI0] = 0,
		[PchSerialIoIndexGSPI1] = 0,
		[PchSerialIoIndexGSPI2] = 0,
		[PchSerialIoIndexGSPI3] = 0,
	}"

	register "SerialIoUartMode" = "{
		[PchSerialIoIndexUART0] = PchSerialIoDisabled,
		[PchSerialIoIndexUART1] = PchSerialIoDisabled,
		[PchSerialIoIndexUART2] = PchSerialIoPci,
	}"

	# TCSS USB3
	register "TcssXhciEn" = "1"
	register "TcssAuxOri" = "0"

	# Enable S0ix
	register "s0ix_enable" = "1"

	#HD Audio
	register "PchHdaDspEnable" = "1"
	register "PchHdaAudioLinkHdaEnable" = "0"
	register "PchHdaAudioLinkDmicEnable[0]" = "1"
	register "PchHdaAudioLinkDmicEnable[1]" = "1"
	register "PchHdaAudioLinkSspEnable[0]" = "1"
	register "PchHdaAudioLinkSspEnable[1]" = "0"
	register "PchHdaAudioLinkSspEnable[2]" = "1"
	register "PchHdaAudioLinkSndwEnable[0]" = "1"

	# Intel Common SoC Config
	register "common_soc_config" = "{
		.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
		.i2c[0] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[1] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[2] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[3] = {
			.speed = I2C_SPEED_FAST,
		},
		.i2c[5] = {
			.speed = I2C_SPEED_FAST,
		},
	}"

	device domain 0 on
		#From EDS(575683)
		device pci 00.0 on  end # Host Bridge		0x9A14:U/0x9A12:Y
		device pci 02.0 on  end # Graphics
		device pci 04.0 on  end # DPTF			0x9A03
		device pci 05.0 on  end # IPU			0x9A19
		device pci 06.0 on  end # PEG60			0x9A09
		device pci 07.0 on  end # TBT_PCIe0		0x9A23
		device pci 07.1 on  end # TBT_PCIe1		0x9A25
		device pci 07.2 on  end # TBT_PCIe2		0x9A27
		device pci 07.3 on  end # TBT_PCIe3		0x9A29
		device pci 08.0 off end # GNA			0x9A11
		device pci 09.0 off end # NPK			0x9A33
		device pci 0a.0 off end # Crash-log SRAM	0x9A0D
		device pci 0d.0 on  end # USB xHCI		0x9A13
		device pci 0d.1 on  end # USB xDCI (OTG)	0x9A15
		device pci 0d.2 on  end # TBT DMA0		0x9A1B
		device pci 0d.3 on  end # TBT DMA1		0x9A1D
		device pci 0e.0 off end # VMD			0x9A0B

		# From PCH EDS(576591)
		device pci 10.2 off end # CNVi: BT		0xA0F5 - A0F7
		device pci 10.6 off end # THC0			0xA0D0
		device pci 10.7 off end # THC1			0xA0D1
		device pci 12.0 on      # SensorHUB		0xA0FC
			chip drivers/intel/ish
				register "firmware_name" = ""tglrvp_ish.bin""
				device generic 0 on end
			end
		end
		device pci 12.6 off end # GSPI2			0x34FB
		device pci 13.0 off end # GSPI3			0xA0FD
		device pci 14.0 on  end # USB3.1 xHCI		0xA0ED
		device pci 14.1 on  end # USB3.1 xDCI		0xA0EE
		device pci 14.2 on  end # Shared RAM		0xA0EF
		chip drivers/intel/wifi
			register "wake" = "GPE0_PME_B0"
			device pci 14.3 on end # CNVi: WiFi		0xA0F0 - A0F3
		end

		device pci 15.0 on	# I2C0			0xA0E8
			chip drivers/i2c/generic
				register "hid" = ""10EC1308""
				register "name" = ""RTAM""
				register "desc" = ""Realtek RT1308 Codec""
				device i2c 10 on end
			end
			chip drivers/i2c/max98373
				register "vmon_slot_no" = "4"
				register "imon_slot_no" = "5"
				register "uid" = "0"
				register "desc" = ""RIGHT SPEAKER AMP""
				register "name" = ""MAXR""
				device i2c 31 on end
			end
			chip drivers/i2c/max98373
				register "vmon_slot_no" = "6"
				register "imon_slot_no" = "7"
				register "uid" = "1"
				register "desc" = ""LEFT SPEAKER AMP""
				register "name" = ""MAXL""
				device i2c 32 on end
			end
			chip drivers/i2c/generic
				register "hid" = ""10EC5682""
				register "name" = ""RT58""
				register "desc" = ""Realtek RT5682""
				register "irq" = "ACPI_IRQ_EDGE_HIGH(GPP_C12_IRQ)"
				register "probed" = "1"
				# Set the jd_src to RT5668_JD1 for jack detection
				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
				register "property_list[0].name" = ""realtek,jd-src""
				register "property_list[0].integer" = "1"
				device i2c 1a on end
			end
		end	# I2C0
		device pci 15.1 on  end # I2C1			0xA0E9
		device pci 15.2 on  end # I2C2			0xA0EA
		device pci 15.3 on  end # I2C3			0xA0EB
		device pci 16.0 on  end # HECI1			0xA0E0
		device pci 16.1 off end # HECI2			0xA0E1
		device pci 16.2 off end # CSME			0xA0E2
		device pci 16.3 off end # CSME			0xA0E3
		device pci 16.4 off end # HECI3			0xA0E4
		device pci 16.5 off end # HECI4			0xA0E5
		device pci 17.0 on  end # SATA			0xA0D3
		device pci 19.0 off end # I2C4			0xA0C5
		device pci 19.1 on  end # I2C5			0xA0C6
		device pci 19.2 on  end # UART2			0xA0C7
		device pci 1c.0 off end # RP1			0xA0B8
		device pci 1c.1 off end # RP2			0xA0B9
		device pci 1c.2 on  end # RP3			0xA0BA
		device pci 1c.3 on  end # RP4			0xA0BB
		device pci 1c.4 off end # RP5			0xA0BC
		device pci 1c.5 off end # RP6			0xA0BD
		device pci 1c.6 off end # RP7			0xA0BE
		device pci 1c.7 off end # RP8			0xA0BF
		device pci 1d.0 on  end # RP9			0xA0B0
		device pci 1d.1 off end # RP10			0xA0B1
		device pci 1d.2 on  end # RP11			0xA0B2
		device pci 1d.3 off end # RP12			0xA0B3
		device pci 1e.0 off end # UART0			0xA0A8
		device pci 1e.1 off end # UART1			0xA0A9
		device pci 1e.2 off end # GSPI0			0xA0AA
		device pci 1e.3 off end # GSPI1			0xA0AB
		device pci 1f.0 on
			chip ec/google/chromeec
				device pnp 0c09.0 on end
			end
		end # eSPI                                      0xA080 - A09F
		device pci 1f.1 on  end # P2SB			0xA0A0
		device pci 1f.2 hidden  # PMC                   0xA0A1
			# The pmc_mux chip driver is a placeholder for the
			# PMC.MUX device in the ACPI hierarchy.
			chip drivers/intel/pmc_mux
				device generic 0 on
					chip drivers/intel/pmc_mux/conn
						register "usb2_port_number" = "6"
						register "usb3_port_number" = "3"
						# SBU is fixed, HSL follows CC
						register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
						device generic 0 on end
					end
					chip drivers/intel/pmc_mux/conn
						register "usb2_port_number" = "5"
						register "usb3_port_number" = "2"
						# SBU is fixed, HSL follows CC
						register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
						device generic 1 on end
					end
				end
			end
		end # PMC
		device pci 1f.3 on  end # Intel HD audio	0xA0C8-A0CF
		device pci 1f.4 on  end # SMBus			0xA0A3
		device pci 1f.5 on  end # SPI			0xA0A4
		device pci 1f.6 off end # GbE			0x15E1/0x15E2
		device pci 1f.7 off end # TH			0xA0A6
	end
end