src/soc/intel/xeon_sp/Kconfig

# SPDX-License-Identifier: GPL-2.0-or-later

source "src/soc/intel/xeon_sp/skx/Kconfig"
source "src/soc/intel/xeon_sp/cpx/Kconfig"

config XEON_SP_COMMON_BASE
	bool

config SOC_INTEL_SKYLAKE_SP
	bool
	select XEON_SP_COMMON_BASE
	select PLATFORM_USES_FSP2_0
	help
	  Intel Skylake-SP support

config SOC_INTEL_COOPERLAKE_SP
	bool
	select XEON_SP_COMMON_BASE
	select PLATFORM_USES_FSP2_2
	select CACHE_MRC_SETTINGS
	help
	  Intel Cooperlake-SP support

if XEON_SP_COMMON_BASE

config	CPU_SPECIFIC_OPTIONS
	def_bool y
	select ARCH_ALL_STAGES_X86_32
	select BOOT_DEVICE_SUPPORTS_WRITES
	select CPU_INTEL_COMMON
	select SOC_INTEL_COMMON
	select SOC_INTEL_COMMON_RESET
	select FSP_PLATFORM_MEMORY_SETTINGS_VERSIONS
	select FSP_T_XIP
	select FSP_M_XIP
	select POSTCAR_STAGE
	select IOAPIC
	select PARALLEL_MP
	select ACPI_NO_SMI_GNVS
	select INTEL_DESCRIPTOR_MODE_CAPABLE
	select SOC_INTEL_COMMON_BLOCK
	select SOC_INTEL_COMMON_BLOCK_CPU
	select SOC_INTEL_COMMON_BLOCK_TIMER
	select SOC_INTEL_COMMON_BLOCK_LPC
	select SOC_INTEL_COMMON_BLOCK_RTC
	select SOC_INTEL_COMMON_BLOCK_SPI
	select SOC_INTEL_COMMON_BLOCK_FAST_SPI
	select SOC_INTEL_COMMON_BLOCK_GPIO
	select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT
	select SOC_INTEL_COMMON_BLOCK_GPIO_PADCFG_PADTOL
	select SOC_INTEL_COMMON_BLOCK_PCR
	select SOC_INTEL_COMMON_BLOCK_P2SB
	select SOC_INTEL_COMMON_BLOCK_PMC
	select SOC_INTEL_COMMON_BLOCK_PMC_DISCOVERABLE
	select SOC_INTEL_COMMON_BLOCK_SMM
	select SOC_INTEL_COMMON_BLOCK_TCO
	select TSC_MONOTONIC_TIMER
	select UDELAY_TSC
	select SUPPORT_CPU_UCODE_IN_CBFS
	select MICROCODE_BLOB_NOT_HOOKED_UP
	select CPU_INTEL_FIRMWARE_INTERFACE_TABLE
	select FSP_CAR
	select CPU_INTEL_COMMON_SMM
	select ACPI_INTEL_HARDWARE_SLEEP_VALUES
	select SMM_TSEG
	select HAVE_SMI_HANDLER
	select X86_SMM_LOADER_VERSION2
	select REG_SCRIPT

config MAINBOARD_USES_FSP2_0
	  bool
	  default y

config USE_FSP2_0_DRIVER
	  def_bool y
	  depends on MAINBOARD_USES_FSP2_0
	  select PLATFORM_USES_FSP2_0
	  select UDK_202005_BINDING
	  select POSTCAR_STAGE

config MAX_SOCKET
	int
	default 2

# For 2S config, the number of cpus could be as high as
# 2 threads * 20 cores * 2 sockets
config MAX_CPUS
	int
	default 80

config PCR_BASE_ADDRESS
	hex
	default 0xfd000000
	help
	  This option allows you to select MMIO Base Address of sideband bus.

config DCACHE_BSP_STACK_SIZE
	hex
	default 0x10000

config MMCONF_BASE_ADDRESS
	hex
	default 0x80000000

config C_ENV_BOOTBLOCK_SIZE
	hex
	default 0xC000

config HEAP_SIZE
	hex
	default 0x80000

endif ## SOC_INTEL_XEON_SP