src/mainboard/intel/kblrvp/variants/rvp11/overridetree.cb

chip soc/intel/skylake

	# FSP Configuration
	register "DspEnable" = "0"
	register "ScsEmmcHs400Enabled" = "0"

	register "serirq_mode" = "SERIRQ_CONTINUOUS"

	# Enable PCIE slot
	register "PcieRpEnable[5]" = "1"
	register "PcieRpClkReqSupport[5]" = "1"
	register "PcieRpClkReqNumber[5]" = "1" #uses SRCCLKREQ1
	# RP6, uses CLK SRC 1
	register "PcieRpClkSrcNumber[5]" = "1"

	register "PcieRpEnable[6]" = "1"
	register "PcieRpClkReqSupport[6]" = "1"
	register "PcieRpClkReqNumber[6]" = "2" #uses SRCCLKREQ2
	# RP7, uses CLK SRC 2
	register "PcieRpClkSrcNumber[6]" = "2"

	register "PcieRpEnable[7]" = "1"
	register "PcieRpClkReqSupport[7]" = "1"
	register "PcieRpClkReqNumber[7]" = "3" #uses SRCCLKREQ3
	# RP8, uses CLK SRC 3
	register "PcieRpClkSrcNumber[7]" = "3"

	register "PcieRpEnable[8]" = "1"
	register "PcieRpClkReqSupport[8]" = "1"
	register "PcieRpClkReqNumber[8]" = "4" #uses SRCCLKREQ4
	# RP9, uses CLK SRC 4
	register "PcieRpClkSrcNumber[8]" = "4"

	register "PcieRpEnable[13]" = "1"
	register "PcieRpClkReqSupport[13]" = "1"
	register "PcieRpClkReqNumber[13]" = "5" #uses SRCCLKREQ5
	# RP14, uses CLK SRC 5
	register "PcieRpClkSrcNumber[13]" = "5"

	register "PcieRpEnable[16]" = "1"
	register "PcieRpClkReqSupport[16]" = "1"
	register "PcieRpClkReqNumber[16]" = "7" #uses SRCCLKREQ7
	# RP17, uses CLK SRC 7
	register "PcieRpClkSrcNumber[16]" = "7"

	# USB related
	register "SsicPortEnable" = "1"


	register "SataSalpSupport" = "1"
	register "SataPortsEnable" = "{
		[0] = 1,
		[1] = 1,
		[2] = 1,
		[3] = 1,
		[4] = 1,
		[5] = 1,
		[6] = 1,
		[7] = 1,
	}"
	register "SerialIoDevMode" = "{
		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
		[PchSerialIoIndexI2C1]  = PchSerialIoPci,
		[PchSerialIoIndexI2C2]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C3]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C4]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C5]  = PchSerialIoDisabled,
		[PchSerialIoIndexSpi0]  = PchSerialIoDisabled,
		[PchSerialIoIndexSpi1]  = PchSerialIoDisabled,
		[PchSerialIoIndexUart0] = PchSerialIoPci,
		[PchSerialIoIndexUart1] = PchSerialIoDisabled,
		[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
	}"

	# PL2 override 60W
	register "power_limits_config" = "{
		.tdp_pl2_override = 60,
	}"

	device domain 0 on
		device ref south_xhci on
			register "usb2_ports" = "{
				[0] = USB2_PORT_MID(OC_SKIP),	/* OTG */
				[1] = USB2_PORT_MID(OC3),	/* Touch Pad */
				[2] = USB2_PORT_MID(OC_SKIP),	/* M.2 BT */
				[3] = USB2_PORT_MID(OC_SKIP),	/* Touch Panel */
				[4] = USB2_PORT_MID(OC_SKIP),	/* M.2 WWAN */
				[5] = USB2_PORT_MID(OC0),	/* Front Panel */
				[6] = USB2_PORT_MID(OC0),	/* Front Panel */
				[7] = USB2_PORT_MID(OC2),	/* Stacked conn (lan + usb) */
				[8] = USB2_PORT_MID(OC2),	/* Stacked conn (lan + usb) */
				[9] = USB2_PORT_MID(OC1),	/* LAN MAGJACK */
				[10] = USB2_PORT_MID(OC1),	/* LAN MAGJACK */
				[11] = USB2_PORT_MID(OC_SKIP),	/* Finger print sensor */
				[12] = USB2_PORT_MID(OC4),	/* USB 2 stack conn */
				[13] = USB2_PORT_MID(OC4),	/* USB 2 stack conn */
			}"

			register "usb3_ports" = "{
				[0] = USB3_PORT_DEFAULT(OC5),		/* OTG */
				[1] = USB3_PORT_DEFAULT(OC_SKIP),	/* M.2 WWAN */
				[2] = USB3_PORT_DEFAULT(OC3),		/* Flex */
				[3] = USB3_PORT_DEFAULT(OC_SKIP),	/* IVCAM */
				[4] = USB3_PORT_DEFAULT(OC1),		/* LAN MAGJACK */
				[5] = USB3_PORT_DEFAULT(OC0),		/* Front Panel */
				[6] = USB3_PORT_DEFAULT(OC0),		/* Front Panel */
				[7] = USB3_PORT_DEFAULT(OC2),		/* Stack Conn */
				[8] = USB3_PORT_DEFAULT(OC2),		/* Stack Conn */
				[9] = USB3_PORT_DEFAULT(OC1),		/* LAN MAGJACK */
			}"
		end
		device ref sa_thermal	off end
		device ref i2c2		off end
		device ref i2c3		off end
		device ref sata		on  end
		device ref i2c4		off end
		device ref emmc		off end
		device ref sdxc		off end
		device ref hda		on  end
		device ref gbe		on  end
	end
end