Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 1 | /* |
| 2 | * This file is part of the coreboot project. |
| 3 | * |
| 4 | * Copyright (C) 2013 Google Inc. |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 5 | * Copyright (C) 2015 Intel Corp. |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License as published by |
| 9 | * the Free Software Foundation; version 2 of the License. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 15 | */ |
| 16 | |
| 17 | #include <arch/io.h> |
| 18 | #include <cbmem.h> |
| 19 | #include <console/console.h> |
| 20 | #include <device/device.h> |
| 21 | #include <device/pci.h> |
| 22 | #include <device/pci_ids.h> |
| 23 | #include <reg_script.h> |
| 24 | |
| 25 | #include <soc/iomap.h> |
| 26 | #include <soc/iosf.h> |
| 27 | #include <soc/lpc.h> |
| 28 | #include <soc/nvs.h> |
| 29 | #include <soc/pattrs.h> |
| 30 | #include <soc/pci_devs.h> |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 31 | #include <soc/pm.h> |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 32 | #include <soc/ramstage.h> |
| 33 | #include "chip.h" |
| 34 | |
| 35 | |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 36 | /* |
| 37 | * The LPE audio devices needs 1MiB of memory reserved aligned to a 512MiB |
| 38 | * address. Just take 1MiB @ 512MiB. |
| 39 | */ |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 40 | #define FIRMWARE_PHYS_BASE (512 << 20) |
| 41 | #define FIRMWARE_PHYS_LENGTH (1 << 20) |
| 42 | #define FIRMWARE_PCI_REG_BASE 0xa8 |
| 43 | #define FIRMWARE_PCI_REG_LENGTH 0xac |
| 44 | #define FIRMWARE_REG_BASE_C0 0x144000 |
| 45 | #define FIRMWARE_REG_LENGTH_C0 (FIRMWARE_REG_BASE_C0 + 4) |
| 46 | |
Lee Leahy | 1072e7d | 2017-03-16 17:35:32 -0700 | [diff] [blame] | 47 | static void assign_device_nvs(device_t dev, u32 *field, unsigned int index) |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 48 | { |
| 49 | struct resource *res; |
| 50 | |
| 51 | res = find_resource(dev, index); |
| 52 | if (res) |
| 53 | *field = res->base; |
| 54 | } |
| 55 | |
| 56 | static void lpe_enable_acpi_mode(device_t dev) |
| 57 | { |
| 58 | static const struct reg_script ops[] = { |
| 59 | /* Disable PCI interrupt, enable Memory and Bus Master */ |
| 60 | REG_PCI_OR32(PCI_COMMAND, |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 61 | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
| 62 | | PCI_COMMAND_INT_DISABLE), |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 63 | /* Enable ACPI mode */ |
| 64 | REG_IOSF_OR(IOSF_PORT_0x58, LPE_PCICFGCTR1, |
| 65 | LPE_PCICFGCTR1_PCI_CFG_DIS | |
| 66 | LPE_PCICFGCTR1_ACPI_INT_EN), |
| 67 | REG_SCRIPT_END |
| 68 | }; |
| 69 | global_nvs_t *gnvs; |
| 70 | |
| 71 | /* Find ACPI NVS to update BARs */ |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 72 | gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS); |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 73 | if (!gnvs) { |
| 74 | printk(BIOS_ERR, "Unable to locate Global NVS\n"); |
| 75 | return; |
| 76 | } |
| 77 | |
| 78 | /* Save BAR0, BAR1, and firmware base to ACPI NVS */ |
| 79 | assign_device_nvs(dev, &gnvs->dev.lpe_bar0, PCI_BASE_ADDRESS_0); |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 80 | /* LPE seems does not have BAR at PCI_BASE_ADDRESS_1 so disable it. */ |
| 81 | /* assign_device_nvs(dev, &gnvs->dev.lpe_bar1, PCI_BASE_ADDRESS_1); */ |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 82 | assign_device_nvs(dev, &gnvs->dev.lpe_fw, FIRMWARE_PCI_REG_BASE); |
| 83 | |
| 84 | /* Device is enabled in ACPI mode */ |
| 85 | gnvs->dev.lpe_en = 1; |
| 86 | |
| 87 | /* Put device in ACPI mode */ |
| 88 | reg_script_run_on_dev(dev, ops); |
| 89 | } |
| 90 | |
| 91 | static void setup_codec_clock(device_t dev) |
| 92 | { |
| 93 | uint32_t reg; |
| 94 | u32 *clk_reg; |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 95 | struct soc_intel_braswell_config *config; |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 96 | const char *freq_str; |
| 97 | |
| 98 | config = dev->chip_info; |
fdurairx | aff502e | 2015-08-21 15:36:53 -0700 | [diff] [blame] | 99 | switch (config->lpe_codec_clk_src) { |
| 100 | case LPE_CLK_SRC_XTAL: |
| 101 | /* XTAL driven bit2=0 */ |
| 102 | freq_str = "19.2MHz External Crystal"; |
| 103 | reg = CLK_SRC_XTAL; |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 104 | break; |
fdurairx | aff502e | 2015-08-21 15:36:53 -0700 | [diff] [blame] | 105 | case LPE_CLK_SRC_PLL: |
| 106 | /* PLL driven bit2=1 */ |
| 107 | freq_str = "19.2MHz PLL"; |
| 108 | reg = CLK_SRC_PLL; |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 109 | break; |
| 110 | default: |
fdurairx | aff502e | 2015-08-21 15:36:53 -0700 | [diff] [blame] | 111 | reg = CLK_SRC_XTAL; |
| 112 | printk(BIOS_DEBUG, "LPE codec clock default to using Crystal\n"); |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 113 | return; |
| 114 | } |
| 115 | |
| 116 | /* Default to always running. */ |
| 117 | reg |= CLK_CTL_ON; |
| 118 | |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 119 | |
| 120 | printk(BIOS_DEBUG, "LPE Audio codec clock set to %sMHz.\n", freq_str); |
| 121 | |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 122 | clk_reg = (u32 *) (PMC_BASE_ADDRESS + PLT_CLK_CTL_0); |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 123 | |
| 124 | write32(clk_reg, (read32(clk_reg) & ~0x7) | reg); |
| 125 | } |
| 126 | |
| 127 | static void lpe_stash_firmware_info(device_t dev) |
| 128 | { |
| 129 | struct resource *res; |
| 130 | struct resource *mmio; |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 131 | |
| 132 | res = find_resource(dev, FIRMWARE_PCI_REG_BASE); |
| 133 | if (res == NULL) { |
| 134 | printk(BIOS_DEBUG, "LPE Firmware memory not found.\n"); |
| 135 | return; |
| 136 | } |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 137 | printk(BIOS_DEBUG, "LPE FW Resource: 0x%08x\n", (u32) res->base); |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 138 | |
| 139 | /* Continue using old way of informing firmware address / size. */ |
| 140 | pci_write_config32(dev, FIRMWARE_PCI_REG_BASE, res->base); |
| 141 | pci_write_config32(dev, FIRMWARE_PCI_REG_LENGTH, res->size); |
| 142 | |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 143 | /* Also put the address in MMIO space like on C0 BTM */ |
| 144 | mmio = find_resource(dev, PCI_BASE_ADDRESS_0); |
Lee Leahy | d94cff6 | 2017-03-16 17:49:42 -0700 | [diff] [blame^] | 145 | write32((void *)(uintptr_t)(mmio->base + FIRMWARE_REG_BASE_C0), |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 146 | res->base); |
Lee Leahy | d94cff6 | 2017-03-16 17:49:42 -0700 | [diff] [blame^] | 147 | write32((void *)(uintptr_t)(mmio->base + FIRMWARE_REG_LENGTH_C0), |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 148 | res->size); |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 149 | } |
| 150 | |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 151 | |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 152 | static void lpe_init(device_t dev) |
| 153 | { |
Lee Leahy | 3247172 | 2015-04-20 15:20:28 -0700 | [diff] [blame] | 154 | struct soc_intel_braswell_config *config = dev->chip_info; |
| 155 | |
| 156 | printk(BIOS_SPEW, "%s/%s ( %s )\n", |
| 157 | __FILE__, __func__, dev_name(dev)); |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 158 | |
| 159 | lpe_stash_firmware_info(dev); |
Lee Leahy | 77ff0b1 | 2015-05-05 15:07:29 -0700 | [diff] [blame] | 160 | setup_codec_clock(dev); |
| 161 | |
| 162 | if (config->lpe_acpi_mode) |
| 163 | lpe_enable_acpi_mode(dev); |
| 164 | } |
| 165 | |
| 166 | static void lpe_read_resources(device_t dev) |
| 167 | { |
| 168 | pci_dev_read_resources(dev); |
| 169 | |
| 170 | reserved_ram_resource(dev, FIRMWARE_PCI_REG_BASE, |
| 171 | FIRMWARE_PHYS_BASE >> 10, |
| 172 | FIRMWARE_PHYS_LENGTH >> 10); |
| 173 | } |
| 174 | |
| 175 | static const struct device_operations device_ops = { |
| 176 | .read_resources = lpe_read_resources, |
| 177 | .set_resources = pci_dev_set_resources, |
| 178 | .enable_resources = pci_dev_enable_resources, |
| 179 | .init = lpe_init, |
| 180 | .enable = NULL, |
| 181 | .scan_bus = NULL, |
| 182 | .ops_pci = &soc_pci_ops, |
| 183 | }; |
| 184 | |
| 185 | static const struct pci_driver southcluster __pci_driver = { |
| 186 | .ops = &device_ops, |
| 187 | .vendor = PCI_VENDOR_ID_INTEL, |
| 188 | .device = LPE_DEVID, |
| 189 | }; |