blob: d9d4e17f570e716efbc625ebb27e79a98a58047b [file] [log] [blame]
Martin Rothbceaf7f2012-09-07 15:02:35 -06001/*
2 * Copyright (c) 2012, Google Inc.
3 *
4 * Based on drivers/spi/winbond.c
5 *
6 * Copyright 2008, Network Appliance Inc.
7 * Jason McMullan <mcmullan@netapp.com>
8 *
9 * See file CREDITS for list of people who contributed to this
10 * project.
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
25 * MA 02110-1301 USA
26 */
27
28
29#include <stdlib.h>
30#include <spi_flash.h>
Edward O'Callaghanc4561e22014-06-26 15:02:40 +100031
Martin Rothbceaf7f2012-09-07 15:02:35 -060032#include "spi_flash_internal.h"
33
34/* GD25Pxx-specific commands */
35#define CMD_GD25_WREN 0x06 /* Write Enable */
36#define CMD_GD25_WRDI 0x04 /* Write Disable */
37#define CMD_GD25_RDSR 0x05 /* Read Status Register */
38#define CMD_GD25_WRSR 0x01 /* Write Status Register */
39#define CMD_GD25_READ 0x03 /* Read Data Bytes */
40#define CMD_GD25_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */
41#define CMD_GD25_PP 0x02 /* Page Program */
42#define CMD_GD25_SE 0x20 /* Sector (4K) Erase */
43#define CMD_GD25_BE 0xd8 /* Block (64K) Erase */
44#define CMD_GD25_CE 0xc7 /* Chip Erase */
45#define CMD_GD25_DP 0xb9 /* Deep Power-down */
46#define CMD_GD25_RES 0xab /* Release from DP, and Read Signature */
47
48struct gigadevice_spi_flash_params {
49 uint16_t id;
50 /* Log2 of page size in power-of-two mode */
51 uint8_t l2_page_size;
52 uint16_t pages_per_sector;
53 uint16_t sectors_per_block;
54 uint16_t nr_blocks;
55 const char *name;
56};
57
58/* spi_flash needs to be first so upper layers can free() it */
59struct gigadevice_spi_flash {
60 struct spi_flash flash;
61 const struct gigadevice_spi_flash_params *params;
62};
63
64static inline struct gigadevice_spi_flash *
65to_gigadevice_spi_flash(struct spi_flash *flash)
66{
67 return container_of(flash, struct gigadevice_spi_flash, flash);
68}
69
70static const struct gigadevice_spi_flash_params gigadevice_spi_flash_table[] = {
71 {
72 .id = 0x4014,
73 .l2_page_size = 8,
74 .pages_per_sector = 16,
75 .sectors_per_block = 16,
76 .nr_blocks = 16,
77 .name = "GD25Q80",
78 },
79 {
80 .id = 0x4015,
81 .l2_page_size = 8,
82 .pages_per_sector = 16,
83 .sectors_per_block = 16,
84 .nr_blocks = 32,
85 .name = "GD25Q16(B)",
86 },
87 {
88 .id = 0x4016,
89 .l2_page_size = 8,
90 .pages_per_sector = 16,
91 .sectors_per_block = 16,
92 .nr_blocks = 64,
93 .name = "GD25Q32(B)",
94 },
95 {
96 .id = 0x6016,
97 .l2_page_size = 8,
98 .pages_per_sector = 16,
99 .sectors_per_block = 16,
100 .nr_blocks = 64,
101 .name = "GD25LQ32",
102 },
103 {
104 .id = 0x4017,
105 .l2_page_size = 8,
106 .pages_per_sector = 16,
107 .sectors_per_block = 16,
108 .nr_blocks = 128,
109 .name = "GD25Q64(B)",
110 },
111 {
112 .id = 0x4018,
113 .l2_page_size = 8,
114 .pages_per_sector = 16,
115 .sectors_per_block = 16,
116 .nr_blocks = 256,
117 .name = "GD25Q128(B)",
118 },
119};
120
121static int gigadevice_write(struct spi_flash *flash, u32 offset,
122 size_t len, const void *buf)
123{
124 struct gigadevice_spi_flash *stm = to_gigadevice_spi_flash(flash);
125 unsigned long byte_addr;
126 unsigned long page_size;
127 size_t chunk_len;
128 size_t actual;
129 int ret;
130 u8 cmd[4];
131
Kyösti Mälkki77d12802014-06-29 16:15:39 +0300132 page_size = 1 << stm->params->l2_page_size;
Martin Rothbceaf7f2012-09-07 15:02:35 -0600133 byte_addr = offset % page_size;
134
Martin Roth3316cf22012-12-05 16:22:54 -0700135 flash->spi->rw = SPI_WRITE_FLAG;
Martin Rothbceaf7f2012-09-07 15:02:35 -0600136 ret = spi_claim_bus(flash->spi);
137 if (ret) {
138 printk(BIOS_WARNING,
139 "SF gigadevice.c: Unable to claim SPI bus\n");
140 return ret;
141 }
142
143 for (actual = 0; actual < len; actual += chunk_len) {
144 chunk_len = min(len - actual, page_size - byte_addr);
Kyösti Mälkki11104952014-06-29 16:17:33 +0300145 chunk_len = spi_crop_chunk(sizeof(cmd), chunk_len);
Martin Rothbceaf7f2012-09-07 15:02:35 -0600146
147 ret = spi_flash_cmd(flash->spi, CMD_GD25_WREN, NULL, 0);
148 if (ret < 0) {
149 printk(BIOS_WARNING,
150 "SF gigadevice.c: Enabling Write failed\n");
151 goto out;
152 }
153
154 cmd[0] = CMD_GD25_PP;
155 cmd[1] = (offset >> 16) & 0xff;
156 cmd[2] = (offset >> 8) & 0xff;
157 cmd[3] = offset & 0xff;
158#if CONFIG_DEBUG_SPI_FLASH
159 printk(BIOS_SPEW,
Duncan Laurie23b00532012-10-10 14:21:23 -0700160 "PP gigadevice.c: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x }"
Martin Rothbceaf7f2012-09-07 15:02:35 -0600161 " chunk_len = %zu\n", buf + actual,
162 cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
163#endif
164
Kyösti Mälkki11104952014-06-29 16:17:33 +0300165 ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd),
Martin Rothbceaf7f2012-09-07 15:02:35 -0600166 buf + actual, chunk_len);
167 if (ret < 0) {
168 printk(BIOS_WARNING,
169 "SF gigadevice.c: Page Program failed\n");
170 goto out;
171 }
172
173 ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
174 if (ret)
175 goto out;
176
177 offset += chunk_len;
178 byte_addr = 0;
179 }
180
Marc Jones747127d2012-12-03 22:16:29 -0700181#if CONFIG_DEBUG_SPI_FLASH
182 printk(BIOS_SPEW,
Martin Rothbceaf7f2012-09-07 15:02:35 -0600183 "SF gigadevice.c: Successfully programmed %zu bytes @ %#x\n",
184 len, (unsigned int)(offset - len));
Marc Jones747127d2012-12-03 22:16:29 -0700185#endif
186
Martin Rothbceaf7f2012-09-07 15:02:35 -0600187 ret = 0;
188
189out:
190 spi_release_bus(flash->spi);
191 return ret;
192}
193
194static int gigadevice_erase(struct spi_flash *flash, u32 offset, size_t len)
195{
196 return spi_flash_cmd_erase(flash, CMD_GD25_SE, offset, len);
197}
198
199struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode)
200{
201 const struct gigadevice_spi_flash_params *params;
202 unsigned page_size;
203 struct gigadevice_spi_flash *stm;
204 unsigned int i;
205
206 for (i = 0; i < ARRAY_SIZE(gigadevice_spi_flash_table); i++) {
207 params = &gigadevice_spi_flash_table[i];
208 if (params->id == ((idcode[1] << 8) | idcode[2]))
209 break;
210 }
211
212 if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) {
213 printk(BIOS_WARNING,
214 "SF gigadevice.c: Unsupported ID %#02x%02x\n",
215 idcode[1], idcode[2]);
216 return NULL;
217 }
218
219 stm = malloc(sizeof(struct gigadevice_spi_flash));
220 if (!stm) {
221 printk(BIOS_WARNING,
222 "SF gigadevice.c: Failed to allocate memory\n");
223 return NULL;
224 }
225
226 stm->params = params;
227 stm->flash.spi = spi;
228 stm->flash.name = params->name;
229
230 /* Assuming power-of-two page size initially. */
231 page_size = 1 << params->l2_page_size;
232
233 stm->flash.write = gigadevice_write;
234 stm->flash.erase = gigadevice_erase;
Duncan Laurie23b00532012-10-10 14:21:23 -0700235#if CONFIG_SPI_FLASH_NO_FAST_READ
Martin Rothbceaf7f2012-09-07 15:02:35 -0600236 stm->flash.read = spi_flash_cmd_read_slow;
237#else
238 stm->flash.read = spi_flash_cmd_read_fast;
239#endif
240 stm->flash.sector_size = (1 << stm->params->l2_page_size) *
241 stm->params->pages_per_sector;
242 stm->flash.size = page_size * params->pages_per_sector
243 * params->sectors_per_block
244 * params->nr_blocks;
245
246 return &stm->flash;
247}