blob: 783d3215661fbe7e7e8a9a61d108adea69c880ca [file] [log] [blame]
Martin Rothbceaf7f2012-09-07 15:02:35 -06001/*
2 * Copyright (c) 2012, Google Inc.
3 *
4 * Based on drivers/spi/winbond.c
5 *
6 * Copyright 2008, Network Appliance Inc.
7 * Jason McMullan <mcmullan@netapp.com>
8 *
9 * See file CREDITS for list of people who contributed to this
10 * project.
11 *
12 * This program is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of
15 * the License, or (at your option) any later version.
16 *
17 * This program is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
25 * MA 02110-1301 USA
26 */
27
28
29#include <stdlib.h>
30#include <spi_flash.h>
31#include "spi_flash_internal.h"
32
33/* GD25Pxx-specific commands */
34#define CMD_GD25_WREN 0x06 /* Write Enable */
35#define CMD_GD25_WRDI 0x04 /* Write Disable */
36#define CMD_GD25_RDSR 0x05 /* Read Status Register */
37#define CMD_GD25_WRSR 0x01 /* Write Status Register */
38#define CMD_GD25_READ 0x03 /* Read Data Bytes */
39#define CMD_GD25_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */
40#define CMD_GD25_PP 0x02 /* Page Program */
41#define CMD_GD25_SE 0x20 /* Sector (4K) Erase */
42#define CMD_GD25_BE 0xd8 /* Block (64K) Erase */
43#define CMD_GD25_CE 0xc7 /* Chip Erase */
44#define CMD_GD25_DP 0xb9 /* Deep Power-down */
45#define CMD_GD25_RES 0xab /* Release from DP, and Read Signature */
46
47struct gigadevice_spi_flash_params {
48 uint16_t id;
49 /* Log2 of page size in power-of-two mode */
50 uint8_t l2_page_size;
51 uint16_t pages_per_sector;
52 uint16_t sectors_per_block;
53 uint16_t nr_blocks;
54 const char *name;
55};
56
57/* spi_flash needs to be first so upper layers can free() it */
58struct gigadevice_spi_flash {
59 struct spi_flash flash;
60 const struct gigadevice_spi_flash_params *params;
61};
62
63static inline struct gigadevice_spi_flash *
64to_gigadevice_spi_flash(struct spi_flash *flash)
65{
66 return container_of(flash, struct gigadevice_spi_flash, flash);
67}
68
69static const struct gigadevice_spi_flash_params gigadevice_spi_flash_table[] = {
70 {
71 .id = 0x4014,
72 .l2_page_size = 8,
73 .pages_per_sector = 16,
74 .sectors_per_block = 16,
75 .nr_blocks = 16,
76 .name = "GD25Q80",
77 },
78 {
79 .id = 0x4015,
80 .l2_page_size = 8,
81 .pages_per_sector = 16,
82 .sectors_per_block = 16,
83 .nr_blocks = 32,
84 .name = "GD25Q16(B)",
85 },
86 {
87 .id = 0x4016,
88 .l2_page_size = 8,
89 .pages_per_sector = 16,
90 .sectors_per_block = 16,
91 .nr_blocks = 64,
92 .name = "GD25Q32(B)",
93 },
94 {
95 .id = 0x6016,
96 .l2_page_size = 8,
97 .pages_per_sector = 16,
98 .sectors_per_block = 16,
99 .nr_blocks = 64,
100 .name = "GD25LQ32",
101 },
102 {
103 .id = 0x4017,
104 .l2_page_size = 8,
105 .pages_per_sector = 16,
106 .sectors_per_block = 16,
107 .nr_blocks = 128,
108 .name = "GD25Q64(B)",
109 },
110 {
111 .id = 0x4018,
112 .l2_page_size = 8,
113 .pages_per_sector = 16,
114 .sectors_per_block = 16,
115 .nr_blocks = 256,
116 .name = "GD25Q128(B)",
117 },
118};
119
120static int gigadevice_write(struct spi_flash *flash, u32 offset,
121 size_t len, const void *buf)
122{
123 struct gigadevice_spi_flash *stm = to_gigadevice_spi_flash(flash);
124 unsigned long byte_addr;
125 unsigned long page_size;
126 size_t chunk_len;
127 size_t actual;
128 int ret;
129 u8 cmd[4];
130
Kyösti Mälkki77d12802014-06-29 16:15:39 +0300131 page_size = 1 << stm->params->l2_page_size;
Martin Rothbceaf7f2012-09-07 15:02:35 -0600132 byte_addr = offset % page_size;
133
Martin Roth3316cf22012-12-05 16:22:54 -0700134 flash->spi->rw = SPI_WRITE_FLAG;
Martin Rothbceaf7f2012-09-07 15:02:35 -0600135 ret = spi_claim_bus(flash->spi);
136 if (ret) {
137 printk(BIOS_WARNING,
138 "SF gigadevice.c: Unable to claim SPI bus\n");
139 return ret;
140 }
141
142 for (actual = 0; actual < len; actual += chunk_len) {
143 chunk_len = min(len - actual, page_size - byte_addr);
Kyösti Mälkki11104952014-06-29 16:17:33 +0300144 chunk_len = spi_crop_chunk(sizeof(cmd), chunk_len);
Martin Rothbceaf7f2012-09-07 15:02:35 -0600145
146 ret = spi_flash_cmd(flash->spi, CMD_GD25_WREN, NULL, 0);
147 if (ret < 0) {
148 printk(BIOS_WARNING,
149 "SF gigadevice.c: Enabling Write failed\n");
150 goto out;
151 }
152
153 cmd[0] = CMD_GD25_PP;
154 cmd[1] = (offset >> 16) & 0xff;
155 cmd[2] = (offset >> 8) & 0xff;
156 cmd[3] = offset & 0xff;
157#if CONFIG_DEBUG_SPI_FLASH
158 printk(BIOS_SPEW,
Duncan Laurie23b00532012-10-10 14:21:23 -0700159 "PP gigadevice.c: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x }"
Martin Rothbceaf7f2012-09-07 15:02:35 -0600160 " chunk_len = %zu\n", buf + actual,
161 cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
162#endif
163
Kyösti Mälkki11104952014-06-29 16:17:33 +0300164 ret = spi_flash_cmd_write(flash->spi, cmd, sizeof(cmd),
Martin Rothbceaf7f2012-09-07 15:02:35 -0600165 buf + actual, chunk_len);
166 if (ret < 0) {
167 printk(BIOS_WARNING,
168 "SF gigadevice.c: Page Program failed\n");
169 goto out;
170 }
171
172 ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
173 if (ret)
174 goto out;
175
176 offset += chunk_len;
177 byte_addr = 0;
178 }
179
Marc Jones747127d2012-12-03 22:16:29 -0700180#if CONFIG_DEBUG_SPI_FLASH
181 printk(BIOS_SPEW,
Martin Rothbceaf7f2012-09-07 15:02:35 -0600182 "SF gigadevice.c: Successfully programmed %zu bytes @ %#x\n",
183 len, (unsigned int)(offset - len));
Marc Jones747127d2012-12-03 22:16:29 -0700184#endif
185
Martin Rothbceaf7f2012-09-07 15:02:35 -0600186 ret = 0;
187
188out:
189 spi_release_bus(flash->spi);
190 return ret;
191}
192
193static int gigadevice_erase(struct spi_flash *flash, u32 offset, size_t len)
194{
195 return spi_flash_cmd_erase(flash, CMD_GD25_SE, offset, len);
196}
197
198struct spi_flash *spi_flash_probe_gigadevice(struct spi_slave *spi, u8 *idcode)
199{
200 const struct gigadevice_spi_flash_params *params;
201 unsigned page_size;
202 struct gigadevice_spi_flash *stm;
203 unsigned int i;
204
205 for (i = 0; i < ARRAY_SIZE(gigadevice_spi_flash_table); i++) {
206 params = &gigadevice_spi_flash_table[i];
207 if (params->id == ((idcode[1] << 8) | idcode[2]))
208 break;
209 }
210
211 if (i == ARRAY_SIZE(gigadevice_spi_flash_table)) {
212 printk(BIOS_WARNING,
213 "SF gigadevice.c: Unsupported ID %#02x%02x\n",
214 idcode[1], idcode[2]);
215 return NULL;
216 }
217
218 stm = malloc(sizeof(struct gigadevice_spi_flash));
219 if (!stm) {
220 printk(BIOS_WARNING,
221 "SF gigadevice.c: Failed to allocate memory\n");
222 return NULL;
223 }
224
225 stm->params = params;
226 stm->flash.spi = spi;
227 stm->flash.name = params->name;
228
229 /* Assuming power-of-two page size initially. */
230 page_size = 1 << params->l2_page_size;
231
232 stm->flash.write = gigadevice_write;
233 stm->flash.erase = gigadevice_erase;
Duncan Laurie23b00532012-10-10 14:21:23 -0700234#if CONFIG_SPI_FLASH_NO_FAST_READ
Martin Rothbceaf7f2012-09-07 15:02:35 -0600235 stm->flash.read = spi_flash_cmd_read_slow;
236#else
237 stm->flash.read = spi_flash_cmd_read_fast;
238#endif
239 stm->flash.sector_size = (1 << stm->params->l2_page_size) *
240 stm->params->pages_per_sector;
241 stm->flash.size = page_size * params->pages_per_sector
242 * params->sectors_per_block
243 * params->nr_blocks;
244
245 return &stm->flash;
246}