Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 1 | /* |
| 2 | * This file is part of the coreboot project. |
| 3 | * |
| 4 | * Copyright (C) 2008-2009 coresystems GmbH |
| 5 | * |
| 6 | * This program is free software; you can redistribute it and/or |
| 7 | * modify it under the terms of the GNU General Public License as |
| 8 | * published by the Free Software Foundation; version 2 of |
| 9 | * the License. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 15 | */ |
| 16 | |
| 17 | #include <arch/io.h> |
| 18 | #include <console/console.h> |
| 19 | #include <device/device.h> |
| 20 | #include <device/pci.h> |
| 21 | #include <device/pci_ids.h> |
| 22 | #include "pch.h" |
Vladimir Serbinenko | 6d6298d | 2014-01-11 07:46:50 +0100 | [diff] [blame] | 23 | #include <pc80/mc146818rtc.h> |
Alexander Couzens | 7bf47ee | 2015-04-16 02:00:21 +0200 | [diff] [blame] | 24 | #include <acpi/sata.h> |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 25 | |
| 26 | typedef struct southbridge_intel_bd82x6x_config config_t; |
| 27 | |
Stefan Reinauer | 16b022a | 2012-07-17 16:42:51 -0700 | [diff] [blame] | 28 | static inline u32 sir_read(struct device *dev, int idx) |
| 29 | { |
| 30 | pci_write_config32(dev, SATA_SIRI, idx); |
| 31 | return pci_read_config32(dev, SATA_SIRD); |
| 32 | } |
| 33 | |
| 34 | static inline void sir_write(struct device *dev, int idx, u32 value) |
| 35 | { |
| 36 | pci_write_config32(dev, SATA_SIRI, idx); |
| 37 | pci_write_config32(dev, SATA_SIRD, value); |
| 38 | } |
| 39 | |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 40 | static void sata_init(struct device *dev) |
| 41 | { |
| 42 | u32 reg32; |
| 43 | u16 reg16; |
| 44 | /* Get the chip configuration */ |
| 45 | config_t *config = dev->chip_info; |
Vladimir Serbinenko | 6d6298d | 2014-01-11 07:46:50 +0100 | [diff] [blame] | 46 | u8 sata_mode; |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 47 | |
Stefan Reinauer | 16b022a | 2012-07-17 16:42:51 -0700 | [diff] [blame] | 48 | printk(BIOS_DEBUG, "SATA: Initializing...\n"); |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 49 | |
| 50 | if (config == NULL) { |
Stefan Reinauer | 16b022a | 2012-07-17 16:42:51 -0700 | [diff] [blame] | 51 | printk(BIOS_ERR, "SATA: ERROR: Device not in devicetree.cb!\n"); |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 52 | return; |
| 53 | } |
| 54 | |
Vladimir Serbinenko | 6d6298d | 2014-01-11 07:46:50 +0100 | [diff] [blame] | 55 | if (get_option(&sata_mode, "sata_mode") != CB_SUCCESS) |
| 56 | /* Default to AHCI */ |
| 57 | sata_mode = 0; |
| 58 | |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 59 | /* SATA configuration */ |
| 60 | |
| 61 | /* Enable BARs */ |
| 62 | pci_write_config16(dev, PCI_COMMAND, 0x0007); |
| 63 | |
Vladimir Serbinenko | 6d6298d | 2014-01-11 07:46:50 +0100 | [diff] [blame] | 64 | /* AHCI */ |
| 65 | if (sata_mode == 0) { |
Kevin Paul Herbert | bde6d30 | 2014-12-24 18:43:20 -0800 | [diff] [blame] | 66 | u8 *abar; |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 67 | |
Stefan Reinauer | 16b022a | 2012-07-17 16:42:51 -0700 | [diff] [blame] | 68 | printk(BIOS_DEBUG, "SATA: Controller in AHCI mode.\n"); |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 69 | |
| 70 | /* Set Interrupt Line */ |
| 71 | /* Interrupt Pin is set by D31IP.PIP */ |
| 72 | pci_write_config8(dev, INTR_LN, 0x0a); |
| 73 | |
| 74 | /* Set timings */ |
| 75 | pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | |
| 76 | IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | |
| 77 | IDE_PPE0 | IDE_IE0 | IDE_TIME0); |
| 78 | pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | |
| 79 | IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS); |
| 80 | |
| 81 | /* Sync DMA */ |
| 82 | pci_write_config16(dev, IDE_SDMA_CNT, IDE_PSDE0); |
| 83 | pci_write_config16(dev, IDE_SDMA_TIM, 0x0001); |
| 84 | |
| 85 | /* Set IDE I/O Configuration */ |
| 86 | reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0; |
| 87 | pci_write_config32(dev, IDE_CONFIG, reg32); |
| 88 | |
| 89 | /* for AHCI, Port Enable is managed in memory mapped space */ |
| 90 | reg16 = pci_read_config16(dev, 0x92); |
| 91 | reg16 &= ~0x3f; /* 6 ports SKU + ORM */ |
| 92 | reg16 |= 0x8000 | config->sata_port_map; |
| 93 | pci_write_config16(dev, 0x92, reg16); |
| 94 | |
| 95 | /* SATA Initialization register */ |
| 96 | pci_write_config32(dev, 0x94, |
| 97 | ((config->sata_port_map ^ 0x3f) << 24) | 0x183); |
| 98 | |
| 99 | /* Initialize AHCI memory-mapped space */ |
Kevin Paul Herbert | bde6d30 | 2014-12-24 18:43:20 -0800 | [diff] [blame] | 100 | abar = (u8 *)pci_read_config32(dev, PCI_BASE_ADDRESS_5); |
| 101 | printk(BIOS_DEBUG, "ABAR: %p\n", abar); |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 102 | /* CAP (HBA Capabilities) : enable power management */ |
| 103 | reg32 = read32(abar + 0x00); |
| 104 | reg32 |= 0x0c006000; // set PSC+SSC+SALP+SSS |
| 105 | reg32 &= ~0x00020060; // clear SXS+EMS+PMS |
Shawn Nematbakhsh | c9fc029 | 2013-03-14 10:44:13 -0700 | [diff] [blame] | 106 | /* Set ISS, if available */ |
| 107 | if (config->sata_interface_speed_support) |
| 108 | { |
| 109 | reg32 &= ~0x00f00000; |
| 110 | reg32 |= (config->sata_interface_speed_support & 0x03) |
| 111 | << 20; |
| 112 | } |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 113 | write32(abar + 0x00, reg32); |
| 114 | /* PI (Ports implemented) */ |
| 115 | write32(abar + 0x0c, config->sata_port_map); |
| 116 | (void) read32(abar + 0x0c); /* Read back 1 */ |
| 117 | (void) read32(abar + 0x0c); /* Read back 2 */ |
| 118 | /* CAP2 (HBA Capabilities Extended)*/ |
| 119 | reg32 = read32(abar + 0x24); |
| 120 | reg32 &= ~0x00000002; |
| 121 | write32(abar + 0x24, reg32); |
| 122 | /* VSP (Vendor Specific Register */ |
| 123 | reg32 = read32(abar + 0xa0); |
| 124 | reg32 &= ~0x00000005; |
| 125 | write32(abar + 0xa0, reg32); |
| 126 | } else { |
Vladimir Serbinenko | 6d6298d | 2014-01-11 07:46:50 +0100 | [diff] [blame] | 127 | /* IDE */ |
Stefan Reinauer | 16b022a | 2012-07-17 16:42:51 -0700 | [diff] [blame] | 128 | printk(BIOS_DEBUG, "SATA: Controller in plain mode.\n"); |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 129 | |
| 130 | /* No AHCI: clear AHCI base */ |
| 131 | pci_write_config32(dev, 0x24, 0x00000000); |
| 132 | |
| 133 | /* And without AHCI BAR no memory decoding */ |
| 134 | reg16 = pci_read_config16(dev, PCI_COMMAND); |
| 135 | reg16 &= ~PCI_COMMAND_MEMORY; |
| 136 | pci_write_config16(dev, PCI_COMMAND, reg16); |
| 137 | |
| 138 | /* Native mode capable on both primary and secondary (0xa) |
| 139 | * or'ed with enabled (0x50) = 0xf |
| 140 | */ |
| 141 | pci_write_config8(dev, 0x09, 0x8f); |
| 142 | |
| 143 | /* Set Interrupt Line */ |
| 144 | /* Interrupt Pin is set by D31IP.PIP */ |
| 145 | pci_write_config8(dev, INTR_LN, 0xff); |
| 146 | |
| 147 | /* Set timings */ |
| 148 | pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | |
| 149 | IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | |
| 150 | IDE_PPE0 | IDE_IE0 | IDE_TIME0); |
| 151 | pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | |
| 152 | IDE_SITRE | IDE_ISP_3_CLOCKS | |
| 153 | IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0); |
| 154 | |
| 155 | /* Sync DMA */ |
| 156 | pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0); |
| 157 | pci_write_config16(dev, IDE_SDMA_TIM, 0x0201); |
| 158 | |
| 159 | /* Set IDE I/O Configuration */ |
| 160 | reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0; |
| 161 | pci_write_config32(dev, IDE_CONFIG, reg32); |
| 162 | |
| 163 | /* Port enable */ |
| 164 | reg16 = pci_read_config16(dev, 0x92); |
| 165 | reg16 &= ~0x3f; |
| 166 | reg16 |= config->sata_port_map; |
| 167 | pci_write_config16(dev, 0x92, reg16); |
| 168 | |
| 169 | /* SATA Initialization register */ |
| 170 | pci_write_config32(dev, 0x94, |
| 171 | ((config->sata_port_map ^ 0x3f) << 24) | 0x183); |
| 172 | } |
Duncan Laurie | cfb64bd | 2012-07-16 16:16:31 -0700 | [diff] [blame] | 173 | |
| 174 | /* Set Gen3 Transmitter settings if needed */ |
| 175 | if (config->sata_port0_gen3_tx) |
| 176 | pch_iobp_update(SATA_IOBP_SP0G3IR, 0, |
| 177 | config->sata_port0_gen3_tx); |
| 178 | |
| 179 | if (config->sata_port1_gen3_tx) |
| 180 | pch_iobp_update(SATA_IOBP_SP1G3IR, 0, |
| 181 | config->sata_port1_gen3_tx); |
Stefan Reinauer | 16b022a | 2012-07-17 16:42:51 -0700 | [diff] [blame] | 182 | |
| 183 | /* Additional Programming Requirements */ |
| 184 | sir_write(dev, 0x04, 0x00001600); |
| 185 | sir_write(dev, 0x28, 0xa0000033); |
| 186 | reg32 = sir_read(dev, 0x54); |
| 187 | reg32 &= 0xff000000; |
| 188 | reg32 |= 0x5555aa; |
| 189 | sir_write(dev, 0x54, reg32); |
| 190 | sir_write(dev, 0x64, 0xcccc8484); |
| 191 | reg32 = sir_read(dev, 0x68); |
| 192 | reg32 &= 0xffff0000; |
| 193 | reg32 |= 0xcccc; |
| 194 | sir_write(dev, 0x68, reg32); |
| 195 | reg32 = sir_read(dev, 0x78); |
| 196 | reg32 &= 0x0000ffff; |
| 197 | reg32 |= 0x88880000; |
| 198 | sir_write(dev, 0x78, reg32); |
| 199 | sir_write(dev, 0x84, 0x001c7000); |
| 200 | sir_write(dev, 0x88, 0x88338822); |
| 201 | sir_write(dev, 0xa0, 0x001c7000); |
| 202 | // a4 |
| 203 | sir_write(dev, 0xc4, 0x0c0c0c0c); |
| 204 | sir_write(dev, 0xc8, 0x0c0c0c0c); |
| 205 | sir_write(dev, 0xd4, 0x10000000); |
| 206 | |
| 207 | pch_iobp_update(0xea004001, 0x3fffffff, 0xc0000000); |
| 208 | pch_iobp_update(0xea00408a, 0xfffffcff, 0x00000100); |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 209 | } |
| 210 | |
Stefan Reinauer | 816d081 | 2012-04-30 16:42:07 -0700 | [diff] [blame] | 211 | static void sata_enable(device_t dev) |
| 212 | { |
| 213 | /* Get the chip configuration */ |
| 214 | config_t *config = dev->chip_info; |
| 215 | u16 map = 0; |
Vladimir Serbinenko | 6d6298d | 2014-01-11 07:46:50 +0100 | [diff] [blame] | 216 | u8 sata_mode; |
Stefan Reinauer | 816d081 | 2012-04-30 16:42:07 -0700 | [diff] [blame] | 217 | |
| 218 | if (!config) |
| 219 | return; |
| 220 | |
Vladimir Serbinenko | 6d6298d | 2014-01-11 07:46:50 +0100 | [diff] [blame] | 221 | if (get_option(&sata_mode, "sata_mode") != CB_SUCCESS) |
| 222 | sata_mode = 0; |
| 223 | |
Stefan Reinauer | 816d081 | 2012-04-30 16:42:07 -0700 | [diff] [blame] | 224 | /* |
| 225 | * Set SATA controller mode early so the resource allocator can |
| 226 | * properly assign IO/Memory resources for the controller. |
| 227 | */ |
Vladimir Serbinenko | 6d6298d | 2014-01-11 07:46:50 +0100 | [diff] [blame] | 228 | if (sata_mode == 0) |
Stefan Reinauer | 816d081 | 2012-04-30 16:42:07 -0700 | [diff] [blame] | 229 | map = 0x0060; |
| 230 | |
| 231 | map |= (config->sata_port_map ^ 0x3f) << 8; |
| 232 | |
| 233 | pci_write_config16(dev, 0x90, map); |
| 234 | } |
| 235 | |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 236 | static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device) |
| 237 | { |
| 238 | if (!vendor || !device) { |
| 239 | pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, |
| 240 | pci_read_config32(dev, PCI_VENDOR_ID)); |
| 241 | } else { |
| 242 | pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, |
| 243 | ((device & 0xffff) << 16) | (vendor & 0xffff)); |
| 244 | } |
| 245 | } |
| 246 | |
Alexander Couzens | 7bf47ee | 2015-04-16 02:00:21 +0200 | [diff] [blame] | 247 | static void sata_fill_ssdt(device_t dev) |
| 248 | { |
| 249 | config_t *config = dev->chip_info; |
| 250 | generate_sata_ssdt_ports("\\_SB_.PCI0.SATA", config->sata_port_map); |
| 251 | } |
| 252 | |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 253 | static struct pci_operations sata_pci_ops = { |
| 254 | .set_subsystem = sata_set_subsystem, |
| 255 | }; |
| 256 | |
| 257 | static struct device_operations sata_ops = { |
| 258 | .read_resources = pci_dev_read_resources, |
| 259 | .set_resources = pci_dev_set_resources, |
| 260 | .enable_resources = pci_dev_enable_resources, |
Alexander Couzens | 7bf47ee | 2015-04-16 02:00:21 +0200 | [diff] [blame] | 261 | .acpi_fill_ssdt_generator |
| 262 | = sata_fill_ssdt, |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 263 | .init = sata_init, |
Stefan Reinauer | 816d081 | 2012-04-30 16:42:07 -0700 | [diff] [blame] | 264 | .enable = sata_enable, |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 265 | .scan_bus = 0, |
| 266 | .ops_pci = &sata_pci_ops, |
| 267 | }; |
| 268 | |
Stefan Reinauer | 9a380ab | 2012-06-22 13:16:11 -0700 | [diff] [blame] | 269 | static const unsigned short pci_device_ids[] = { 0x1c00, 0x1c01, 0x1c02, 0x1c03, |
| 270 | 0x1e00, 0x1e01, 0x1e02, 0x1e03, |
| 271 | 0 }; |
| 272 | |
| 273 | static const struct pci_driver pch_sata __pci_driver = { |
| 274 | .ops = &sata_ops, |
| 275 | .vendor = PCI_VENDOR_ID_INTEL, |
| 276 | .devices = pci_device_ids, |
Stefan Reinauer | 8e07382 | 2012-04-04 00:07:22 +0200 | [diff] [blame] | 277 | }; |