ibexpeak / bd82x6x: Make SATA mode user-visible option.
Ability to choose compatibility mode is interesting for testing payloads and
OS for compatibility with older systems.
As per comments
"ide_legacy_combined # TODO: Does nothing since
generations, remove from sb code?"
The "combined" mode was removed. It wasn't used by any mobo and the code for
it is almost identical to IDE one other than few bits relating to interrupt
handling and ISA mode.
Change-Id: I407a8fac753b513812a86bef5abcf39c6d81472e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/4658
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
diff --git a/src/southbridge/intel/bd82x6x/sata.c b/src/southbridge/intel/bd82x6x/sata.c
index 594b09d..133ebee 100644
--- a/src/southbridge/intel/bd82x6x/sata.c
+++ b/src/southbridge/intel/bd82x6x/sata.c
@@ -24,6 +24,7 @@
#include <device/pci.h>
#include <device/pci_ids.h>
#include "pch.h"
+#include <pc80/mc146818rtc.h>
typedef struct southbridge_intel_bd82x6x_config config_t;
@@ -45,6 +46,7 @@
u16 reg16;
/* Get the chip configuration */
config_t *config = dev->chip_info;
+ u8 sata_mode;
printk(BIOS_DEBUG, "SATA: Initializing...\n");
@@ -53,48 +55,17 @@
return;
}
+ if (get_option(&sata_mode, "sata_mode") != CB_SUCCESS)
+ /* Default to AHCI */
+ sata_mode = 0;
+
/* SATA configuration */
/* Enable BARs */
pci_write_config16(dev, PCI_COMMAND, 0x0007);
- if (config->ide_legacy_combined) {
- printk(BIOS_DEBUG, "SATA: Controller in combined mode.\n");
-
- /* No AHCI: clear AHCI base */
- pci_write_config32(dev, 0x24, 0x00000000);
- /* And without AHCI BAR no memory decoding */
- reg16 = pci_read_config16(dev, PCI_COMMAND);
- reg16 &= ~PCI_COMMAND_MEMORY;
- pci_write_config16(dev, PCI_COMMAND, reg16);
-
- pci_write_config8(dev, 0x09, 0x80);
-
- /* Set timings */
- pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE |
- IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS);
- pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE |
- IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS |
- IDE_PPE0 | IDE_IE0 | IDE_TIME0);
-
- /* Sync DMA */
- pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0);
- pci_write_config16(dev, IDE_SDMA_TIM, 0x0200);
-
- /* Set IDE I/O Configuration */
- reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
- pci_write_config32(dev, IDE_CONFIG, reg32);
-
- /* Port enable */
- reg16 = pci_read_config16(dev, 0x92);
- reg16 &= ~0x3f;
- reg16 |= config->sata_port_map;
- pci_write_config16(dev, 0x92, reg16);
-
- /* SATA Initialization register */
- pci_write_config32(dev, 0x94,
- ((config->sata_port_map ^ 0x3f) << 24) | 0x183);
- } else if(config->sata_ahci) {
+ /* AHCI */
+ if (sata_mode == 0) {
u32 abar;
printk(BIOS_DEBUG, "SATA: Controller in AHCI mode.\n");
@@ -156,6 +127,7 @@
reg32 &= ~0x00000005;
write32(abar + 0xa0, reg32);
} else {
+ /* IDE */
printk(BIOS_DEBUG, "SATA: Controller in plain mode.\n");
/* No AHCI: clear AHCI base */
@@ -244,15 +216,19 @@
/* Get the chip configuration */
config_t *config = dev->chip_info;
u16 map = 0;
+ u8 sata_mode;
if (!config)
return;
+ if (get_option(&sata_mode, "sata_mode") != CB_SUCCESS)
+ sata_mode = 0;
+
/*
* Set SATA controller mode early so the resource allocator can
* properly assign IO/Memory resources for the controller.
*/
- if (config->sata_ahci)
+ if (sata_mode == 0)
map = 0x0060;
map |= (config->sata_port_map ^ 0x3f) << 8;