src/mainboard/google/fizz/variants/endeavour/overridetree.cb

chip soc/intel/skylake

	# Enable Root port 7(x1) for TPU1
	register "PcieRpEnable[6]" = "1"
	# Enable CLKREQ#
	register "PcieRpClkReqSupport[6]" = "1"
	# RP 7 uses SRCCLKREQ4#
	register "PcieRpClkReqNumber[6]" = "4"
	# RP 7, Enable Advanced Error Reporting
	register "PcieRpAdvancedErrorReporting[6]" = "1"
	# RP 7, Enable Latency Tolerance Reporting Mechanism
	register "PcieRpLtrEnable[6]" = "1"
	# RP 7 uses CLK SRC 4
	register "PcieRpClkSrcNumber[6]" = "4"

	# Enable Root port 8(x1) for TPU0
	register "PcieRpEnable[7]" = "1"
	# Enable CLKREQ#
	register "PcieRpClkReqSupport[7]" = "1"
	# RP 8 uses SRCCLKREQ2#
	register "PcieRpClkReqNumber[7]" = "2"
	# RP 8, Enable Advanced Error Reporting
	register "PcieRpAdvancedErrorReporting[7]" = "1"
	# RP 8, Enable Latency Tolerance Reporting Mechanism
	register "PcieRpLtrEnable[7]" = "1"
	# RP 8 uses CLK SRC 2
	register "PcieRpClkSrcNumber[7]" = "2"

	# Enable Root port 9(x4) for i350 LAN
	register "PcieRpEnable[8]" = "1"
	# Disable CLKREQ#
	register "PcieRpClkReqSupport[8]" = "0"
	# RP 9, Enable Advanced Error Reporting
	register "PcieRpAdvancedErrorReporting[8]" = "1"
	# RP 9, Enable Latency Tolerance Reporting Mechanism
	register "PcieRpLtrEnable[8]" = "1"
	# RP 9 uses CLK SRC 2
	register "PcieRpClkSrcNumber[8]" = "2"

	# These are part of Root port 9(x4)
	register "PcieRpEnable[9]" = "0"
	register "PcieRpEnable[10]" = "0"
	register "PcieRpEnable[11]" = "0"

	register "usb2_ports[0]" = "USB2_PORT_LONG(OC_SKIP)"	# Type-C
	register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)"	# HDMI
	register "usb2_ports[2]" = "USB2_PORT_MID(OC2)"		# Type-A Rear
	register "usb2_ports[3]" = "USB2_PORT_MID(OC2)"		# Type-A Rear
	register "usb2_ports[4]" = "USB2_PORT_MID(OC3)"		# Type-A Rear
	register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)"	# HDMI Audio
	register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)"	# Bluetooth

	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# Type-C
	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)"	# HDMI
	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)"	# Type-A Rear
	register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC2)"	# Type-A Rear
	register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC3)"	# Type-A Rear

	register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3"		# TPU
	register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3"		# TPM
	register "i2c_voltage[2]" = "I2C_VOLTAGE_1V8"		# None
	register "i2c_voltage[3]" = "I2C_VOLTAGE_1V8"		# HDMI
	register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8"		# Audio

	register "SerialIoDevMode" = "{
		[PchSerialIoIndexI2C0]  = PchSerialIoPci,
		[PchSerialIoIndexI2C1]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C2]  = PchSerialIoPci,
		[PchSerialIoIndexI2C3]  = PchSerialIoPci,
		[PchSerialIoIndexI2C4]  = PchSerialIoDisabled,
		[PchSerialIoIndexI2C5]  = PchSerialIoPci,
		[PchSerialIoIndexSpi0]  = PchSerialIoPci,
		[PchSerialIoIndexSpi1]  = PchSerialIoDisabled,
		[PchSerialIoIndexUart0] = PchSerialIoSkipInit,
		[PchSerialIoIndexUart1] = PchSerialIoDisabled,
		[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
	}"

	device domain 0 on
		device pci 14.0 on
			chip drivers/usb/acpi
				device usb 0.0 on
					chip drivers/usb/acpi
						register "desc" = ""USB2 HDMI In""
						register "type" = "UPC_TYPE_INTERNAL"
						device usb 2.1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Rear Left""
						register "type" = "UPC_TYPE_A"
						device usb 2.2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Rear Middle""
						register "type" = "UPC_TYPE_A"
						device usb 2.3 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 Type-A Rear Right""
						register "type" = "UPC_TYPE_A"
						device usb 2.4 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB2 HDMI Audio In""
						register "type" = "UPC_TYPE_INTERNAL"
						device usb 2.5 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 HDMI Video In""
						register "type" = "UPC_TYPE_INTERNAL"
						device usb 3.1 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-A Rear Left""
						register "type" = "UPC_TYPE_USB3_A"
						device usb 3.2 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-A Rear Middle""
						register "type" = "UPC_TYPE_USB3_A"
						device usb 3.3 on end
					end
					chip drivers/usb/acpi
						register "desc" = ""USB3 Type-A Rear Right""
						register "type" = "UPC_TYPE_USB3_A"
						device usb 3.4 on end
					end
					device usb 3.5 off end
				end
			end
		end # USB xHCI
		device pci 15.3 on
			chip drivers/i2c/generic
				register "hid" = "ACPI_DT_NAMESPACE_HID"
				register "desc" = ""Chrontel 7322""
				register "uid" = "1"
				register "compat_string" = ""chrontel,ch7322""
				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_HIGH(GPP_A18)"
				device i2c 75 on end
			end
			chip drivers/i2c/generic
				register "hid" = "ACPI_DT_NAMESPACE_HID"
				register "desc" = ""Chrontel 7322""
				register "uid" = "2"
				register "compat_string" = ""chrontel,ch7322""
				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_HIGH(GPP_A20)"
				device i2c 76 on end
			end
		end # I2C #3
		device pci 19.1 on
			chip drivers/i2c/generic
				register "hid" = ""10EC5663""
				register "name" = ""RT53""
				register "desc" = ""Realtek RT5663""
				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D9)"
				device i2c 13 on end
			end
		end # I2C #5
		device pci 1c.6 on end # PCI Express Port 7 for TPU1
		device pci 1c.7 on end # PCI Express Port 8 for TPU0
		device pci 1d.0 on end # PCI Express Port 9 for POE LAN
		device pci 1d.1 off end # PCI Express Port 10
		device pci 1d.2 off end # PCI Express Port 11
		device pci 1d.3 off end # PCI Express Port 12
	end
end