src/mainboard/google/beltino/romstage.c

/* SPDX-License-Identifier: GPL-2.0-only */

#include <stdint.h>
#include <arch/romstage.h>
#include <cpu/intel/haswell/haswell.h>
#include <northbridge/intel/haswell/haswell.h>
#include <northbridge/intel/haswell/raminit.h>
#include <southbridge/intel/lynxpoint/lp_gpio.h>
#include <southbridge/intel/lynxpoint/pch.h>
#include <superio/ite/common/ite.h>
#include <superio/ite/it8772f/it8772f.h>
#include <variant/gpio.h>
#include "onboard.h"

void mainboard_config_rcba(void)
{
	/*
	 *             GFX    INTA -> PIRQA (MSI)
	 * D28IP_P1IP  PCIE   INTA -> PIRQA
	 * D29IP_E1P   EHCI   INTA -> PIRQD
	 * D20IP_XHCI  XHCI   INTA -> PIRQC (MSI)
	 * D31IP_SIP   SATA   INTA -> PIRQF (MSI)
	 * D31IP_SMIP  SMBUS  INTB -> PIRQG
	 * D31IP_TTIP  THRT   INTC -> PIRQA
	 * D27IP_ZIP   HDA    INTA -> PIRQG (MSI)
	 */

	/* Device interrupt pin register (board specific) */
	RCBA32(D31IP) = (INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
			(INTB << D31IP_SMIP) | (INTA << D31IP_SIP);
	RCBA32(D29IP) = (INTA << D29IP_E1P);
	RCBA32(D28IP) = (INTA << D28IP_P1IP) | (INTC << D28IP_P3IP) |
			(INTB << D28IP_P4IP);
	RCBA32(D27IP) = (INTA << D27IP_ZIP);
	RCBA32(D26IP) = (INTA << D26IP_E2P);
	RCBA32(D22IP) = (NOINT << D22IP_MEI1IP);
	RCBA32(D20IP) = (INTA << D20IP_XHCI);

	/* Device interrupt route registers */
	RCBA32(D31IR) = DIR_ROUTE(PIRQG, PIRQC, PIRQB, PIRQA); /* LPC */
	RCBA32(D29IR) = DIR_ROUTE(PIRQD, PIRQD, PIRQD, PIRQD); /* EHCI */
	RCBA32(D28IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD); /* PCIE */
	RCBA32(D27IR) = DIR_ROUTE(PIRQG, PIRQG, PIRQG, PIRQG); /* HDA */
	RCBA32(D22IR) = DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA); /* ME */
	RCBA32(D21IR) = DIR_ROUTE(PIRQE, PIRQF, PIRQF, PIRQF); /* SIO */
	RCBA32(D20IR) = DIR_ROUTE(PIRQC, PIRQC, PIRQC, PIRQC); /* XHCI */
	RCBA32(D23IR) = DIR_ROUTE(PIRQH, PIRQH, PIRQH, PIRQH); /* SDIO */
}

void mainboard_romstage_entry(void)
{
	struct pei_data pei_data = {
		.pei_version = PEI_VERSION,
		.mchbar = (uintptr_t)DEFAULT_MCHBAR,
		.dmibar = (uintptr_t)DEFAULT_DMIBAR,
		.epbar = DEFAULT_EPBAR,
		.pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
		.smbusbar = SMBUS_IO_BASE,
		.hpet_address = HPET_ADDR,
		.rcba = (uintptr_t)DEFAULT_RCBA,
		.pmbase = DEFAULT_PMBASE,
		.gpiobase = DEFAULT_GPIOBASE,
		.temp_mmio_base = 0xfed08000,
		.system_type = 5, /* ULT */
		.tseg_size = CONFIG_SMM_TSEG_SIZE,
		.spd_addresses = { 0xa0, 0x00, 0xa4, 0x00 },
		.ec_present = 0,
		// 0 = leave channel enabled
		// 1 = disable dimm 0 on channel
		// 2 = disable dimm 1 on channel
		// 3 = disable dimm 0+1 on channel
		.dimm_channel0_disabled = 2,
		.dimm_channel1_disabled = 2,
		// Enable 2x refresh mode
		.ddr_refresh_2x = 1,
		.dq_pins_interleaved = 1,
		.max_ddr3_freq = 1600,
		.usb_xhci_on_resume = 1,
		.usb2_ports = {
			/* Length, Enable, OCn#, Location */
			{ 0x0064, 1, 0,               /* P0: VP8 */
			  USB_PORT_MINI_PCIE },
			{ 0x0040, 1, 0,               /* P1: Port A, CN22 */
			  USB_PORT_INTERNAL },
			{ 0x0040, 1, 1,		      /* P2: Port B, CN23 */
			  USB_PORT_INTERNAL },
			{ 0x0040, 1, USB_OC_PIN_SKIP, /* P3: WLAN */
			  USB_PORT_INTERNAL },
			{ 0x0040, 1, 2,		      /* P4: Port C, CN25 */
			  USB_PORT_INTERNAL },
			{ 0x0040, 1, 2,		      /* P5: Port D, CN25 */
			  USB_PORT_INTERNAL },
			{ 0x0040, 1, USB_OC_PIN_SKIP, /* P6: Card Reader */
			  USB_PORT_INTERNAL },
			{ 0x0000, 0, 0,               /* P7: N/C */
			  USB_PORT_SKIP },
		},
		.usb3_ports = {
			/* Enable, OCn# */
			{ 1, 0 }, /* P1; CN22 */
			{ 1, 1 }, /* P2; CN23  */
			{ 1, 2 }, /* P3; CN25 */
			{ 1, 2 }, /* P4; CN25 */
		},
	};

	struct romstage_params romstage_params = {
		.pei_data = &pei_data,
		.gpio_map = &mainboard_gpio_map,
	};

	/* Early SuperIO setup */
	ite_kill_watchdog(IT8772F_GPIO_DEV);
	it8772f_ac_resume_southbridge(IT8772F_SUPERIO_DEV);
	pch_enable_lpc();
	ite_enable_serial(IT8772F_SERIAL_DEV, CONFIG_TTYS0_BASE);

    /* Turn on Power LED */
	set_power_led(LED_ON);

	/* Call into the real romstage main with this board's attributes. */
	romstage_common(&romstage_params);
}