src/mainboard/hp/compaq_8200_elite_sff/devicetree.cb

##
## This file is part of the coreboot project.
##
## Copyright (C) 2018 Patrick Rudolph <siro@das-labor.org>
##
## This program is free software; you can redistribute it and/or
## modify it under the terms of the GNU General Public License as
## published by the Free Software Foundation; version 2 of
## the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##

chip northbridge/intel/sandybridge
	register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }"
	register "gfx.link_frequency_270_mhz" = "0"
	register "gfx.ndid" = "3"
	register "gfx.use_spread_spectrum_clock" = "0"
	register "gpu_dp_b_hotplug" = "0"
	register "gpu_dp_c_hotplug" = "0"
	register "gpu_dp_d_hotplug" = "0"

	device cpu_cluster 0x0 on
		chip cpu/intel/socket_LGA1155
			device lapic 0x0 on
			end
		end
		chip cpu/intel/model_206ax
			register "c1_acpower" = "1"
			register "c1_battery" = "1"
			register "c2_acpower" = "3"
			register "c2_battery" = "3"
			register "c3_acpower" = "5"
			register "c3_battery" = "5"
			device lapic 0xacac off
			end
		end
	end

	register "pci_mmio_size" = "2048"

	device domain 0x0 on
		chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
			register "c2_latency" = "0x0065"
			register "docking_supported" = "0"
			register "gen1_dec" = "0x00fc0601"
			register "gen2_dec" = "0x00fc0801"
			register "p_cnt_throttling_supported" = "1"
			register "pcie_hotplug_map" = "{ 0, 0, 0, 0, 0, 0, 0, 0 }"
			register "pcie_port_coalesce" = "1"
			register "sata_interface_speed_support" = "0x3"
			register "sata_port_map" = "0xf"
			register "spi_lvscc" = "0x2005"
			register "spi_uvscc" = "0x0"
			device pci 16.0 on # Management Engine Interface 1
				subsystemid 0x103c 0x1495
			end
			device pci 16.1 off # Management Engine Interface 2
			end
			device pci 16.2 off # Management Engine IDE-R
			end
			device pci 16.3 on # Management Engine KT
				subsystemid 0x103c 0x1495
			end
			device pci 19.0 on # Intel Gigabit Ethernet
				subsystemid 0x103c 0x1495
			end
			device pci 1a.0 on # USB2 EHCI #2
				subsystemid 0x103c 0x1495
			end
			device pci 1b.0 on # High Definition Audio Audio controller
				subsystemid 0x103c 0x1495
			end
			device pci 1c.0 on # PCIe Port #1
				subsystemid 0x103c 0x1495
			end
			device pci 1c.1 off # PCIe Port #2
			end
			device pci 1c.2 off # PCIe Port #3
			end
			device pci 1c.3 off # PCIe Port #4
			end
			device pci 1c.4 on # PCIe Port #5
				subsystemid 0x103c 0x1495
			end
			device pci 1c.5 off # PCIe Port #6
			end
			device pci 1c.6 on # PCIe Port #7
				subsystemid 0x103c 0x1495
			end
			device pci 1c.7 on # PCIe Port #8
				subsystemid 0x103c 0x1495
			end
			device pci 1d.0 on # USB2 EHCI #1
				subsystemid 0x103c 0x1495
			end
			device pci 1e.0 on # PCI bridge
				subsystemid 0x103c 0x1495
			end
			device pci 1f.0 on # LPC bridge PCI-LPC bridge
				subsystemid 0x103c 0x1495
				chip superio/nuvoton/npcd378
					device pnp 2e.0 off end		# Floppy
					device pnp 2e.1 on		# Parallel port
						# global

						# serialice: Vendor writes:
						irq 0x14 = 0x9c
						irq 0x1c = 0xa8
						irq 0x1d = 0x08
						irq 0x22 = 0x3f
						irq 0x1a = 0xb0
						# dumped from superiotool:
						irq 0x1b = 0x1e
						irq 0x27 = 0x04
						irq 0x2a = 0x00
						irq 0x2d = 0x01
						# parallel port
						io 0x60 = 0x378
						irq 0x70 = 0x07
						drq 0x74 = 0x01
					end
					device pnp 2e.2 off		# COM1
						io 0x60 = 0x2f8
						irq 0x70 = 3
					end
					device pnp 2e.3 on		# COM2, IR
						io 0x60 = 0x3f8
						irq 0x70 = 4
					end
					device pnp 2e.4 on		# LED control
						io 0x60 = 0x600
						# IOBASE[0h] = bit0 LED red / green
						# IOBASE[0h] = bit1-4 LED PWM duty cycle
						# IOBASE[1h] = bit6 SWCC

						io 0x62 = 0x610
						# IOBASE [0h] = GPES
						# IOBASE [1h] = GPEE
						# IOBASE [4h:7h] = 32bit upcounter at 1Mhz
						# IOBASE [8h:bh] = GPS
						# IOBASE [ch:fh] = GPE
					end
					device pnp 2e.5 on		# Mouse
						irq 0x70 = 0xc
					end
					device pnp 2e.6 on		# Keyboard
						io 0x60 = 0x0060
						io 0x62 = 0x0064
						irq 0x70 = 0x01
						# serialice: Vendor writes:
						drq 0xf0 = 0x40
					end
					device pnp 2e.7 on		#  WDT ?
						io 0x60 = 0x620
					end
					device pnp 2e.8 on		# HWM
						io 0x60 = 0x800
						# IOBASE[0h:feh] HWM page
						# IOBASE[ffh] bit0-bit3 page selector

						drq 0xf0 = 0x20
						drq 0xf1 = 0x01
						drq 0xf2 = 0x40
						drq 0xf3 = 0x01

						drq 0xf4 = 0x66
						drq 0xf5 = 0x67
						drq 0xf6 = 0x66
						drq 0xf7 = 0x01
					end
					device pnp 2e.f on		# GPIO OD ?
						drq 0xf1 = 0x97
						drq 0xf2 = 0x01
						drq 0xf5 = 0x08
						drq 0xfe = 0x80
					end
					device pnp 2e.15 on		# BUS ?
						io 0x60 = 0x0680
						io 0x62 = 0x0690
					end
					device pnp 2e.1c on		# Suspend Control ?
						io 0x60 = 0x640
						# writing to IOBASE[5h]
						#  0x0: Power off
						#  0x9: Power off and bricked until CMOS battery removed
					end
					device pnp 2e.1e on		# GPIO ?
						io 0x60 = 0x660
						drq 0xf4 = 0x01
						# skip the following, as it
						# looks like remapped registers
						#drq 0xf5 = 0x06
						#drq 0xf6 = 0x60
						#drq 0xfe = 0x03
					end
				end
				chip drivers/pc80/tpm
					device pnp 4e.0 on end          # TPM module
				end
			end
			device pci 1f.2 on # SATA Controller 1
				subsystemid 0x103c 0x1495
			end
			device pci 1f.3 on # SMBus
				subsystemid 0x103c 0x1495
			end
			device pci 1f.5 off # SATA Controller 2
			end
			device pci 1f.6 off # Thermal
			end
		end
		device pci 00.0 on # Host bridge Host bridge
			subsystemid 0x103c 0x1495
		end
		device pci 01.0 on # PCIe Bridge for discrete graphics
			subsystemid 0x103c 0x1495
		end
		device pci 02.0 on # Internal graphics VGA controller
			subsystemid 0x103c 0x1495
		end
	end
end