src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2006 AMD
 * (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
 * Copyright (C) 2006 MSI
 * (Written by Bingxun Shi <bingxunshi@gmail.com> for MSI)
 * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz> 
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */

#define ASSEMBLY 1
#define __ROMCC__

#define RAMINIT_SYSINFO 1

#define CACHE_AS_RAM_ADDRESS_DEBUG 0

unsigned int get_sbdn(unsigned bus);

/* Used by raminit. */
#define QRANK_DIMM_SUPPORT 1

/* Used by init_cpus and fidvid */
#define K8_SET_FIDVID 1

/* If we want to wait for core1 done before DQS training, set it to 0. */
#define K8_SET_FIDVID_CORE0_ONLY 1

/* #define DEBUG_SMBUS 1 */

#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
#if CONFIG_USE_INIT == 0
#include "lib/memcpy.c"
#endif
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include "northbridge/amd/amdk8/early_ht.c"
#include "superio/winbond/w83627ehg/w83627ehg_early_serial.c"
#include "southbridge/via/vt8237r/vt8237r_early_smbus.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
#include "northbridge/amd/amdk8/setup_resource_map.c"

#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1)
#define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED)
#define ACPI_DEV PNP_DEV(0x2e, W83627EHG_ACPI)
#define RTC_DEV PNP_DEV(0x2e, W83627EHG_RTC)

static void memreset_setup(void)
{
}

static void memreset(int controllers, const struct mem_controller *ctrl)
{
}

static inline int spd_read_byte(unsigned device, unsigned address)
{
	return smbus_read_byte(device, address);
}

#define K8_4RANK_DIMM_SUPPORT 1

#include "northbridge/amd/amdk8/amdk8.h"
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "sdram/generic_sdram.c"
#include "cpu/amd/dualcore/dualcore.c"
#include "southbridge/via/k8t890/k8t890_early_car.c"
#include "cpu/amd/car/copy_and_run.c"
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
#include "cpu/amd/model_fxx/fidvid.c"
#include "northbridge/amd/amdk8/resourcemap.c"

void activate_spd_rom(const struct mem_controller *ctrl)
{
}

void hard_reset(void)
{
	print_info("NO HARD RESET. FIX ME!\n");
}

void soft_reset(void)
{
	uint8_t tmp;

	set_bios_reset();
	print_debug("soft reset \r\n");

	/* PCI reset */
	tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f);
	tmp |= 0x01;
	pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp);

	while (1) {
		/* daisy daisy ... */
		hlt();
	}
}

unsigned int get_sbdn(unsigned bus)
{
	device_t dev;

	dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA,
					PCI_DEVICE_ID_VIA_VT8237R_LPC), bus);
	return (dev >> 15) & 0x1f;
}

void sio_init(void)
{
	u8 reg;

	pnp_enter_ext_func_mode(SERIAL_DEV);
	/* We have 24MHz input. */
	reg = pnp_read_config(SERIAL_DEV, 0x24);
	pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40));
	/* We have GPIO for KB/MS pin. */
	reg = pnp_read_config(SERIAL_DEV, 0x2a);
	pnp_write_config(SERIAL_DEV, 0x2a, (reg | 1));
	/* We have all RESTOUT and even some reserved bits, too. */
	reg = pnp_read_config(SERIAL_DEV, 0x2c);
	pnp_write_config(SERIAL_DEV, 0x2c, (reg | 0xf0));
	pnp_exit_ext_func_mode(SERIAL_DEV);

	pnp_enter_ext_func_mode(ACPI_DEV);
	pnp_set_logical_device(ACPI_DEV);
	/*
	 * Set the delay rising time from PWROK_LP to PWROK_ST to
	 * 300 - 600ms, and 0 to vice versa.
	 */
	reg = pnp_read_config(ACPI_DEV, 0xe6);
	pnp_write_config(ACPI_DEV, 0xe6, (reg & 0xf0));
	/* 1 Use external suspend clock source 32.768KHz. Undocumented?? */
	reg = pnp_read_config(ACPI_DEV, 0xe4);
	pnp_write_config(ACPI_DEV, 0xe4, (reg | 0x10));
	pnp_exit_ext_func_mode(ACPI_DEV);

	pnp_enter_ext_func_mode(GPIO_DEV);
	pnp_set_logical_device(GPIO_DEV);
	/* Set memory voltage to 2.75V, vcore offset + 100mV, 1.5V chipset voltage. */
	pnp_write_config(GPIO_DEV, 0x30, 0x09);	/* Enable GPIO 2 & GPIO 5. */
	pnp_write_config(GPIO_DEV, 0xe2, 0x00);	/* No inversion */
	pnp_write_config(GPIO_DEV, 0xe5, 0x00);	/* No inversion */
	pnp_write_config(GPIO_DEV, 0xe3, 0x03);	/* 0000 0011, 0=output 1=input */
	pnp_write_config(GPIO_DEV, 0xe0, 0xde);	/* 1101 1110, 0=output 1=input */
	pnp_write_config(GPIO_DEV, 0xe1, 0x01);	/* Set output val. */
	pnp_write_config(GPIO_DEV, 0xe4, 0xb4);	/* Set output val (1011 0100). */
	pnp_exit_ext_func_mode(GPIO_DEV);
}

#if USE_FALLBACK_IMAGE == 1

void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
	/* unsigned last_boot_normal_x = last_boot_normal(); */
	/* FIXME */
	unsigned last_boot_normal_x = 1;

	sio_init();
	w83627ehg_enable_serial(SERIAL_DEV, TTYS0_BASE);
	uart_init();
	console_init();

	print_info("now booting... fallback\r\n");

	/* Is this a CPU only reset? Or is this a secondary CPU? */
	if ((cpu_init_detectedx) || (!boot_cpu())) {
		if (last_boot_normal_x)
			goto normal_image;
		else
			goto fallback_image;
	}

	/* Nothing special needs to be done to find bus 0. */
	/* Allow the HT devices to be found. */
	enumerate_ht_chain();

	/* Is this a deliberate reset by the BIOS? */
	if (bios_reset_detected() && last_boot_normal_x) {
		goto normal_image;
	}
	/* This is the primary CPU, how should I boot? */
	else if (do_normal_boot()) {
		goto normal_image;
	} else {
		goto fallback_image;
	}

normal_image:
	/* print_info("JMP normal image\r\n"); */

	__asm__ __volatile__("jmp __normal_image":
			     :"a" (bist), "b" (cpu_init_detectedx));

fallback_image:
	;
}
#endif

void real_main(unsigned long bist, unsigned long cpu_init_detectedx);

void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if USE_FALLBACK_IMAGE == 1
	failover_process(bist, cpu_init_detectedx);
#endif
	real_main(bist, cpu_init_detectedx);
}

void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
	static const uint16_t spd_addr[] = {
		(0xa << 3) | 0, (0xa << 3) | 2, 0, 0,
		(0xa << 3) | 1, (0xa << 3) | 3, 0, 0,
#if CONFIG_MAX_PHYSICAL_CPUS > 1
		(0xa << 3) | 4, (0xa << 3) | 6, 0, 0,
		(0xa << 3) | 5, (0xa << 3) | 7, 0, 0,
#endif
	};
	unsigned bsp_apicid = 0;
	int needs_reset = 0;
	struct sys_info *sysinfo =
	    (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
	char *p;

	sio_init();
	w83627ehg_enable_serial(SERIAL_DEV, TTYS0_BASE);
	uart_init();
	console_init();

	print_info("now booting... real_main\r\n");

	if (bist == 0)
		bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);

	/* Halt if there was a built in self test failure. */
	report_bist_failure(bist);

	setup_default_resource_map();
	setup_coherent_ht_domain();
	wait_all_core0_started();

	print_info("now booting... Core0 started\r\n");

#if CONFIG_LOGICAL_CPUS==1
	/* It is said that we should start core1 after all core0 launched. */
	start_other_cores();
	wait_all_other_cores_started(bsp_apicid);
#endif
	init_timer();
	ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */

	enable_fid_change();
	init_fidvid_bsp(bsp_apicid);

	needs_reset = optimize_link_coherent_ht();
	needs_reset |= optimize_link_incoherent_ht(sysinfo);

	/* FIXME: Assumes that 1000MHz LDT is selected. */
	needs_reset |= k8t890_early_setup_car(16, 0x6);

	if (needs_reset) {
		print_debug("ht reset -\r\n");
		soft_reset();
	}

	/* Stop the APs so we can start them later in init. */
	allow_all_aps_stop(bsp_apicid);

	/* It's the time to set ctrl now. */
	fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);

	enable_smbus();
	memreset_setup();
	sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
	post_cache_as_ram();
}