| Frank Wu | bc83738 | 2020-03-13 16:41:10 +0800 | [diff] [blame] | 1 | chip soc/intel/tigerlake |
| Frank Wu | b763a4f | 2020-05-15 15:21:31 +0800 | [diff] [blame^] | 2 | register "usb2_ports[0]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used |
| 3 | register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC0)" # Type-A / Type-C Port 0 |
| 4 | register "usb2_ports[2]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used |
| 5 | register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC1)" # Type-A / Type-C Port 1 |
| 6 | register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # Front Camera |
| 7 | register "usb2_ports[5]" = "USB2_PORT_TYPE_C(OC2)" # Type-A / Type-C Port 2 |
| 8 | register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used |
| 9 | register "usb2_ports[7]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used |
| 10 | register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used |
| 11 | register "usb2_ports[9]" = "USB2_PORT_EMPTY" # Type-A / Type-C Not Used |
| 12 | |
| 13 | register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-A / Type-C Port 0 |
| 14 | register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-A / Type-C Port 1 |
| 15 | register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC2)" # Type-A / Type-C Port 2 |
| 16 | register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Type-A / Type-C Not Used |
| 17 | |
| Frank Wu | bc83738 | 2020-03-13 16:41:10 +0800 | [diff] [blame] | 18 | device domain 0 on |
| Frank Wu | b763a4f | 2020-05-15 15:21:31 +0800 | [diff] [blame^] | 19 | device pci 15.0 on |
| 20 | chip drivers/i2c/generic |
| 21 | register "hid" = ""10EC5682"" |
| 22 | register "name" = ""RT58"" |
| 23 | register "desc" = ""Headset Codec"" |
| 24 | register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)" |
| 25 | # Set the jd_src to RT5668_JD1 for jack detection |
| 26 | register "property_count" = "1" |
| 27 | register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" |
| 28 | register "property_list[0].name" = ""realtek,jd-src"" |
| 29 | register "property_list[0].integer" = "1" |
| 30 | device i2c 1a on end |
| 31 | end |
| 32 | chip drivers/i2c/max98373 |
| 33 | register "vmon_slot_no" = "0" |
| 34 | register "imon_slot_no" = "1" |
| 35 | register "uid" = "0" |
| 36 | register "desc" = ""Right Speaker Amp"" |
| 37 | register "name" = ""MAXR"" |
| 38 | device i2c 31 on end |
| 39 | end |
| 40 | chip drivers/i2c/max98373 |
| 41 | register "vmon_slot_no" = "2" |
| 42 | register "imon_slot_no" = "3" |
| 43 | register "uid" = "1" |
| 44 | register "desc" = ""Left Speaker Amp"" |
| 45 | register "name" = ""MAXL"" |
| 46 | device i2c 32 on end |
| 47 | end |
| 48 | end # I2C #0 0xA0E8 |
| 49 | device pci 1f.3 on |
| 50 | chip drivers/generic/max98357a |
| 51 | register "hid" = ""MX98357A"" |
| 52 | register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_F18)" |
| 53 | register "sdmode_delay" = "5" |
| 54 | device generic 0 on end |
| 55 | end |
| 56 | end # Intel HD audio 0xA0C8-A0CF |
| Frank Wu | bc83738 | 2020-03-13 16:41:10 +0800 | [diff] [blame] | 57 | end |
| 58 | end |