Angel Pons | 182dbde | 2020-04-02 23:49:05 +0200 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0-only */ |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 2 | |
| 3 | #include <console/console.h> |
| 4 | #include <device/device.h> |
| 5 | #include <device/pci.h> |
| 6 | #include <device/pci_ids.h> |
Kyösti Mälkki | cbf9571 | 2020-01-05 08:05:45 +0200 | [diff] [blame] | 7 | #include <option.h> |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 8 | #include <pc80/mc146818rtc.h> |
| 9 | #include <pc80/isa-dma.h> |
| 10 | #include <pc80/i8259.h> |
| 11 | #include <arch/io.h> |
Kyösti Mälkki | f1b58b7 | 2019-03-01 13:43:02 +0200 | [diff] [blame] | 12 | #include <device/pci_ops.h> |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 13 | #include <arch/ioapic.h> |
Furquan Shaikh | 76cedd2 | 2020-05-02 10:24:23 -0700 | [diff] [blame] | 14 | #include <acpi/acpi.h> |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 15 | #include <cpu/x86/smm.h> |
Furquan Shaikh | 76cedd2 | 2020-05-02 10:24:23 -0700 | [diff] [blame] | 16 | #include <acpi/acpigen.h> |
Kyösti Mälkki | 12b121c | 2019-08-18 16:33:39 +0300 | [diff] [blame] | 17 | #include "chip.h" |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 18 | #include "i82801ix.h" |
Vladimir Serbinenko | 36fa5b8 | 2014-10-28 23:43:20 +0100 | [diff] [blame] | 19 | #include <southbridge/intel/common/pciehp.h> |
Angel Pons | e1a616c | 2020-06-21 17:02:43 +0200 | [diff] [blame] | 20 | #include <southbridge/intel/common/pmutil.h> |
Arthur Heymans | e798e6a | 2017-12-23 23:09:54 +0100 | [diff] [blame] | 21 | #include <southbridge/intel/common/acpi_pirq_gen.h> |
Tim Wawrzynczak | f62c494 | 2021-02-26 10:30:52 -0700 | [diff] [blame] | 22 | #include <southbridge/intel/common/rcba_pirq.h> |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 23 | |
| 24 | #define NMI_OFF 0 |
| 25 | |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 26 | typedef struct southbridge_intel_i82801ix_config config_t; |
| 27 | |
| 28 | static void i82801ix_enable_apic(struct device *dev) |
| 29 | { |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 30 | /* Enable IOAPIC. Keep APIC Range Select at zero. */ |
| 31 | RCBA8(0x31ff) = 0x03; |
| 32 | /* We have to read 0x31ff back if bit0 changed. */ |
Paul Menzel | d0299e4 | 2013-10-21 09:28:19 +0200 | [diff] [blame] | 33 | RCBA8(0x31ff); |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 34 | |
| 35 | /* Lock maximum redirection entries (MRE), R/WO register. */ |
Kyösti Mälkki | 04a4037 | 2021-06-06 08:04:28 +0300 | [diff] [blame] | 36 | ioapic_lock_max_vectors(VIO_APIC_VADDR); |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 37 | |
Kevin Paul Herbert | bde6d30 | 2014-12-24 18:43:20 -0800 | [diff] [blame] | 38 | setup_ioapic(VIO_APIC_VADDR, 2); /* ICH7 code uses id 2. */ |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 39 | } |
| 40 | |
| 41 | static void i82801ix_enable_serial_irqs(struct device *dev) |
| 42 | { |
| 43 | /* Set packet length and toggle silent mode bit for one frame. */ |
| 44 | pci_write_config8(dev, D31F0_SERIRQ_CNTL, |
| 45 | (1 << 7) | (1 << 6) | ((21 - 17) << 2) | (0 << 0)); |
| 46 | } |
| 47 | |
| 48 | /* PIRQ[n]_ROUT[3:0] - PIRQ Routing Control |
| 49 | * 0x00 - 0000 = Reserved |
| 50 | * 0x01 - 0001 = Reserved |
| 51 | * 0x02 - 0010 = Reserved |
| 52 | * 0x03 - 0011 = IRQ3 |
| 53 | * 0x04 - 0100 = IRQ4 |
| 54 | * 0x05 - 0101 = IRQ5 |
| 55 | * 0x06 - 0110 = IRQ6 |
| 56 | * 0x07 - 0111 = IRQ7 |
| 57 | * 0x08 - 1000 = Reserved |
| 58 | * 0x09 - 1001 = IRQ9 |
| 59 | * 0x0A - 1010 = IRQ10 |
| 60 | * 0x0B - 1011 = IRQ11 |
| 61 | * 0x0C - 1100 = IRQ12 |
| 62 | * 0x0D - 1101 = Reserved |
| 63 | * 0x0E - 1110 = IRQ14 |
| 64 | * 0x0F - 1111 = IRQ15 |
| 65 | * PIRQ[n]_ROUT[7] - PIRQ Routing Control |
| 66 | * 0x80 - The PIRQ is not routed. |
| 67 | */ |
| 68 | |
Elyes HAOUAS | 8aa5073 | 2018-05-13 13:34:58 +0200 | [diff] [blame] | 69 | static void i82801ix_pirq_init(struct device *dev) |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 70 | { |
Elyes HAOUAS | 8aa5073 | 2018-05-13 13:34:58 +0200 | [diff] [blame] | 71 | struct device *irq_dev; |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 72 | /* Get the chip configuration */ |
| 73 | config_t *config = dev->chip_info; |
| 74 | |
| 75 | pci_write_config8(dev, D31F0_PIRQA_ROUT, config->pirqa_routing); |
| 76 | pci_write_config8(dev, D31F0_PIRQB_ROUT, config->pirqb_routing); |
| 77 | pci_write_config8(dev, D31F0_PIRQC_ROUT, config->pirqc_routing); |
| 78 | pci_write_config8(dev, D31F0_PIRQD_ROUT, config->pirqd_routing); |
| 79 | |
| 80 | pci_write_config8(dev, D31F0_PIRQE_ROUT, config->pirqe_routing); |
| 81 | pci_write_config8(dev, D31F0_PIRQF_ROUT, config->pirqf_routing); |
| 82 | pci_write_config8(dev, D31F0_PIRQG_ROUT, config->pirqg_routing); |
| 83 | pci_write_config8(dev, D31F0_PIRQH_ROUT, config->pirqh_routing); |
| 84 | |
| 85 | /* Eric Biederman once said we should let the OS do this. |
| 86 | * I am not so sure anymore he was right. |
| 87 | */ |
| 88 | |
Elyes HAOUAS | ba28e8d | 2016-08-31 19:22:16 +0200 | [diff] [blame] | 89 | for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) { |
Angel Pons | bcc2c72 | 2020-08-10 13:44:09 +0200 | [diff] [blame] | 90 | u8 int_pin = 0, int_line = 0; |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 91 | |
| 92 | if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI) |
| 93 | continue; |
| 94 | |
| 95 | int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN); |
| 96 | |
| 97 | switch (int_pin) { |
| 98 | case 1: /* INTA# */ int_line = config->pirqa_routing; break; |
| 99 | case 2: /* INTB# */ int_line = config->pirqb_routing; break; |
| 100 | case 3: /* INTC# */ int_line = config->pirqc_routing; break; |
| 101 | case 4: /* INTD# */ int_line = config->pirqd_routing; break; |
| 102 | } |
| 103 | |
| 104 | if (!int_line) |
| 105 | continue; |
| 106 | |
| 107 | pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line); |
| 108 | } |
| 109 | } |
| 110 | |
Elyes HAOUAS | 8aa5073 | 2018-05-13 13:34:58 +0200 | [diff] [blame] | 111 | static void i82801ix_gpi_routing(struct device *dev) |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 112 | { |
| 113 | /* Get the chip configuration */ |
| 114 | config_t *config = dev->chip_info; |
| 115 | u32 reg32 = 0; |
| 116 | |
| 117 | /* An array would be much nicer here, or some |
| 118 | * other method of doing this. |
| 119 | */ |
| 120 | reg32 |= (config->gpi0_routing & 0x03) << 0; |
| 121 | reg32 |= (config->gpi1_routing & 0x03) << 2; |
| 122 | reg32 |= (config->gpi2_routing & 0x03) << 4; |
| 123 | reg32 |= (config->gpi3_routing & 0x03) << 6; |
| 124 | reg32 |= (config->gpi4_routing & 0x03) << 8; |
| 125 | reg32 |= (config->gpi5_routing & 0x03) << 10; |
| 126 | reg32 |= (config->gpi6_routing & 0x03) << 12; |
| 127 | reg32 |= (config->gpi7_routing & 0x03) << 14; |
| 128 | reg32 |= (config->gpi8_routing & 0x03) << 16; |
| 129 | reg32 |= (config->gpi9_routing & 0x03) << 18; |
| 130 | reg32 |= (config->gpi10_routing & 0x03) << 20; |
| 131 | reg32 |= (config->gpi11_routing & 0x03) << 22; |
| 132 | reg32 |= (config->gpi12_routing & 0x03) << 24; |
| 133 | reg32 |= (config->gpi13_routing & 0x03) << 26; |
| 134 | reg32 |= (config->gpi14_routing & 0x03) << 28; |
| 135 | reg32 |= (config->gpi15_routing & 0x03) << 30; |
| 136 | |
| 137 | pci_write_config32(dev, D31F0_GPIO_ROUT, reg32); |
| 138 | } |
| 139 | |
Elyes HAOUAS | 8aa5073 | 2018-05-13 13:34:58 +0200 | [diff] [blame] | 140 | static void i82801ix_power_options(struct device *dev) |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 141 | { |
| 142 | u8 reg8; |
| 143 | u16 reg16, pmbase; |
| 144 | u32 reg32; |
| 145 | const char *state; |
| 146 | /* Get the chip configuration */ |
| 147 | config_t *config = dev->chip_info; |
| 148 | |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 149 | /* BIOS must program... */ |
Angel Pons | bcc2c72 | 2020-08-10 13:44:09 +0200 | [diff] [blame] | 150 | pci_or_config32(dev, 0xac, (1 << 30) | (3 << 8)); |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 151 | |
| 152 | /* Which state do we want to goto after g3 (power restored)? |
| 153 | * 0 == S0 Full On |
| 154 | * 1 == S5 Soft Off |
| 155 | * |
| 156 | * If the option is not existent (Laptops), use MAINBOARD_POWER_ON. |
| 157 | */ |
Angel Pons | 88dcb31 | 2021-04-26 17:10:28 +0200 | [diff] [blame] | 158 | const unsigned int pwr_on = get_uint_option("power_on_after_fail", MAINBOARD_POWER_ON); |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 159 | |
| 160 | reg8 = pci_read_config8(dev, D31F0_GEN_PMCON_3); |
| 161 | reg8 &= 0xfe; |
| 162 | switch (pwr_on) { |
| 163 | case MAINBOARD_POWER_OFF: |
| 164 | reg8 |= 1; |
| 165 | state = "off"; |
| 166 | break; |
| 167 | case MAINBOARD_POWER_ON: |
| 168 | reg8 &= ~1; |
| 169 | state = "on"; |
| 170 | break; |
| 171 | case MAINBOARD_POWER_KEEP: |
| 172 | reg8 &= ~1; |
| 173 | state = "state keep"; |
| 174 | break; |
| 175 | default: |
| 176 | state = "undefined"; |
| 177 | } |
| 178 | |
| 179 | reg8 |= (3 << 4); /* avoid #S4 assertions */ |
Elyes HAOUAS | dc41371 | 2021-02-07 20:54:53 +0100 | [diff] [blame] | 180 | reg8 &= ~(1 << 3); /* minimum assertion is 1 to 2 RTCCLK */ |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 181 | |
| 182 | pci_write_config8(dev, D31F0_GEN_PMCON_3, reg8); |
| 183 | printk(BIOS_INFO, "Set power %s after power failure.\n", state); |
| 184 | |
| 185 | /* Set up NMI on errors. */ |
| 186 | reg8 = inb(0x61); |
| 187 | reg8 &= 0x0f; /* Higher Nibble must be 0 */ |
| 188 | reg8 &= ~(1 << 3); /* IOCHK# NMI Enable */ |
| 189 | // reg8 &= ~(1 << 2); /* PCI SERR# Enable */ |
| 190 | reg8 |= (1 << 2); /* PCI SERR# Disable for now */ |
| 191 | outb(reg8, 0x61); |
| 192 | |
| 193 | reg8 = inb(0x74); /* Read from 0x74 as 0x70 is write only. */ |
Angel Pons | 88dcb31 | 2021-04-26 17:10:28 +0200 | [diff] [blame] | 194 | const unsigned int nmi_option = get_uint_option("nmi", NMI_OFF); |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 195 | if (nmi_option) { |
| 196 | printk(BIOS_INFO, "NMI sources enabled.\n"); |
| 197 | reg8 &= ~(1 << 7); /* Set NMI. */ |
| 198 | } else { |
| 199 | printk(BIOS_INFO, "NMI sources disabled.\n"); |
Elyes HAOUAS | 9c5d463 | 2018-04-26 22:21:21 +0200 | [diff] [blame] | 200 | reg8 |= (1 << 7); /* Can't mask NMI from PCI-E and NMI_NOW */ |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 201 | } |
| 202 | outb(reg8, 0x70); |
| 203 | |
| 204 | /* Enable CPU_SLP# and Intel Speedstep, set SMI# rate down */ |
| 205 | reg16 = pci_read_config16(dev, D31F0_GEN_PMCON_1); |
| 206 | reg16 &= ~(3 << 0); // SMI# rate 1 minute |
| 207 | reg16 |= (1 << 2); // CLKRUN_EN - Mobile/Ultra only |
| 208 | reg16 |= (1 << 3); // Speedstep Enable - Mobile/Ultra only |
| 209 | reg16 |= (1 << 5); // CPUSLP_EN Desktop only |
| 210 | |
| 211 | if (config->c4onc3_enable) |
| 212 | reg16 |= (1 << 7); |
| 213 | |
| 214 | // another laptop wants this? |
| 215 | // reg16 &= ~(1 << 10); // BIOS_PCI_EXP_EN - Desktop/Mobile only |
| 216 | reg16 |= (1 << 10); // BIOS_PCI_EXP_EN - Desktop/Mobile only |
Kyösti Mälkki | 9446447 | 2020-06-13 13:45:42 +0300 | [diff] [blame] | 217 | if (CONFIG(DEBUG_PERIODIC_SMI)) |
| 218 | reg16 |= (3 << 0); // Periodic SMI every 8s |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 219 | if (config->c5_enable) |
| 220 | reg16 |= (1 << 11); /* Enable C5, C6 and PMSYNC# */ |
| 221 | pci_write_config16(dev, D31F0_GEN_PMCON_1, reg16); |
| 222 | |
| 223 | /* Set exit timings for C5/C6. */ |
| 224 | if (config->c5_enable) { |
| 225 | reg8 = pci_read_config8(dev, D31F0_C5_EXIT_TIMING); |
| 226 | reg8 &= ~((7 << 3) | (7 << 0)); |
| 227 | if (config->c6_enable) |
| 228 | reg8 |= (5 << 3) | (3 << 0); /* 38-44us PMSYNC# to STPCLK#, |
| 229 | 95-102us DPRSTP# to STP_CPU# */ |
| 230 | else |
| 231 | reg8 |= (0 << 3) | (1 << 0); /* 16-17us PMSYNC# to STPCLK#, |
| 232 | 34-40us DPRSTP# to STP_CPU# */ |
| 233 | pci_write_config8(dev, D31F0_C5_EXIT_TIMING, reg8); |
| 234 | } |
| 235 | |
| 236 | // Set the board's GPI routing. |
| 237 | i82801ix_gpi_routing(dev); |
| 238 | |
| 239 | pmbase = pci_read_config16(dev, 0x40) & 0xfffe; |
| 240 | |
| 241 | outl(config->gpe0_en, pmbase + 0x28); |
| 242 | outw(config->alt_gp_smi_en, pmbase + 0x38); |
| 243 | |
| 244 | /* Set up power management block and determine sleep mode */ |
| 245 | reg16 = inw(pmbase + 0x00); /* PM1_STS */ |
| 246 | outw(reg16, pmbase + 0x00); /* Clear status bits. At least bit11 (power |
| 247 | button override) must be cleared or SCI |
| 248 | will be constantly fired and OSPM must |
| 249 | not know about it (ACPI spec says to |
| 250 | ignore the bit). */ |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 251 | |
| 252 | /* Set duty cycle for hardware throttling (defaults to 0x0: 50%). */ |
| 253 | reg32 = inl(pmbase + 0x10); |
| 254 | reg32 &= ~(7 << 5); |
| 255 | reg32 |= (config->throttle_duty & 7) << 5; |
| 256 | outl(reg32, pmbase + 0x10); |
| 257 | } |
| 258 | |
Elyes HAOUAS | 8aa5073 | 2018-05-13 13:34:58 +0200 | [diff] [blame] | 259 | static void i82801ix_configure_cstates(struct device *dev) |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 260 | { |
Angel Pons | 6740647 | 2020-06-08 11:13:42 +0200 | [diff] [blame] | 261 | // Enable Popup & Popdown |
| 262 | pci_or_config8(dev, D31F0_CxSTATE_CNF, (1 << 4) | (1 << 3) | (1 << 2)); |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 263 | |
| 264 | // Set Deeper Sleep configuration to recommended values |
Angel Pons | 6740647 | 2020-06-08 11:13:42 +0200 | [diff] [blame] | 265 | // Deeper Sleep to Stop CPU: 34-40us |
| 266 | // Deeper Sleep to Sleep: 15us |
| 267 | pci_update_config8(dev, D31F0_C4TIMING_CNT, ~0x0f, (2 << 2) | (2 << 0)); |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 268 | |
| 269 | /* We could enable slow-C4 exit here, if someone needs it? */ |
| 270 | } |
| 271 | |
| 272 | static void i82801ix_rtc_init(struct device *dev) |
| 273 | { |
| 274 | u8 reg8; |
| 275 | int rtc_failed; |
| 276 | |
| 277 | reg8 = pci_read_config8(dev, D31F0_GEN_PMCON_3); |
| 278 | rtc_failed = reg8 & RTC_BATTERY_DEAD; |
| 279 | if (rtc_failed) { |
| 280 | reg8 &= ~RTC_BATTERY_DEAD; |
| 281 | pci_write_config8(dev, D31F0_GEN_PMCON_3, reg8); |
| 282 | } |
| 283 | printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); |
| 284 | |
Gabe Black | b3f08c6 | 2014-04-30 17:12:25 -0700 | [diff] [blame] | 285 | cmos_init(rtc_failed); |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 286 | } |
| 287 | |
| 288 | static void enable_hpet(void) |
| 289 | { |
| 290 | u32 reg32; |
| 291 | |
| 292 | /* Move HPET to default address 0xfed00000 and enable it */ |
| 293 | reg32 = RCBA32(RCBA_HPTC); |
| 294 | reg32 |= (1 << 7); // HPET Address Enable |
| 295 | reg32 &= ~(3 << 0); |
| 296 | RCBA32(RCBA_HPTC) = reg32; |
| 297 | } |
| 298 | |
| 299 | static void enable_clock_gating(void) |
| 300 | { |
| 301 | u32 reg32; |
| 302 | |
| 303 | /* Enable DMI dynamic clock gating. */ |
| 304 | RCBA32(RCBA_DMIC) |= 3; |
| 305 | |
| 306 | /* Enable Clock Gating for most devices. */ |
| 307 | reg32 = RCBA32(RCBA_CG); |
| 308 | reg32 |= (1 << 31); /* LPC dynamic clock gating */ |
| 309 | /* USB UHCI dynamic clock gating: */ |
| 310 | reg32 |= (1 << 29) | (1 << 28); |
| 311 | /* SATA dynamic clock gating [0-3]: */ |
| 312 | reg32 |= (1 << 27) | (1 << 26) | (1 << 25) | (1 << 24); |
| 313 | reg32 |= (1 << 23); /* LAN static clock gating (if LAN disabled) */ |
| 314 | reg32 |= (1 << 22); /* HD audio dynamic clock gating */ |
| 315 | reg32 &= ~(1 << 21); /* No HD audio static clock gating */ |
| 316 | reg32 &= ~(1 << 20); /* No USB EHCI static clock gating */ |
| 317 | reg32 |= (1 << 19); /* USB EHCI dynamic clock gating */ |
| 318 | /* More SATA dynamic clock gating [4-5]: */ |
| 319 | reg32 |= (1 << 18) | (1 << 17); |
| 320 | reg32 |= (1 << 16); /* PCI dynamic clock gating */ |
| 321 | /* PCIe, DMI dynamic clock gating: */ |
| 322 | reg32 |= (1 << 4) | (1 << 3) | (1 << 2) | (1 << 1); |
| 323 | reg32 |= (1 << 0); /* PCIe root port static clock gating */ |
| 324 | RCBA32(RCBA_CG) = reg32; |
| 325 | |
| 326 | /* Enable SPI dynamic clock gating. */ |
| 327 | RCBA32(0x38c0) |= 7; |
| 328 | } |
| 329 | |
Kyösti Mälkki | 6feb4da | 2019-07-13 17:28:37 +0300 | [diff] [blame] | 330 | static void i82801ix_set_acpi_mode(struct device *dev) |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 331 | { |
Kyösti Mälkki | ad882c3 | 2020-06-02 05:05:30 +0300 | [diff] [blame] | 332 | if (!acpi_is_wakeup_s3()) { |
| 333 | apm_control(APM_CNT_ACPI_DISABLE); |
| 334 | } else { |
| 335 | apm_control(APM_CNT_ACPI_ENABLE); |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 336 | } |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 337 | } |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 338 | |
| 339 | static void lpc_init(struct device *dev) |
| 340 | { |
Elyes HAOUAS | bfc255a | 2020-03-07 13:05:14 +0100 | [diff] [blame] | 341 | printk(BIOS_DEBUG, "i82801ix: %s\n", __func__); |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 342 | |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 343 | /* IO APIC initialization. */ |
| 344 | i82801ix_enable_apic(dev); |
| 345 | |
| 346 | i82801ix_enable_serial_irqs(dev); |
| 347 | |
| 348 | /* Setup the PIRQ. */ |
| 349 | i82801ix_pirq_init(dev); |
| 350 | |
| 351 | /* Setup power options. */ |
| 352 | i82801ix_power_options(dev); |
| 353 | |
| 354 | /* Configure Cx state registers */ |
| 355 | if (LPC_IS_MOBILE(dev)) |
| 356 | i82801ix_configure_cstates(dev); |
| 357 | |
| 358 | /* Initialize the real time clock. */ |
| 359 | i82801ix_rtc_init(dev); |
| 360 | |
| 361 | /* Initialize ISA DMA. */ |
| 362 | isa_dma_init(); |
| 363 | |
| 364 | /* Initialize the High Precision Event Timers, if present. */ |
| 365 | enable_hpet(); |
| 366 | |
| 367 | /* Initialize Clock Gating */ |
| 368 | enable_clock_gating(); |
| 369 | |
| 370 | setup_i8259(); |
| 371 | |
| 372 | /* The OS should do this? */ |
| 373 | /* Interrupt 9 should be level triggered (SCI) */ |
| 374 | i8259_configure_irq_trigger(9, 1); |
| 375 | |
Kyösti Mälkki | 44da9e7 | 2019-10-09 12:32:16 +0300 | [diff] [blame] | 376 | i82801ix_set_acpi_mode(dev); |
Kyösti Mälkki | 6feb4da | 2019-07-13 17:28:37 +0300 | [diff] [blame] | 377 | |
| 378 | /* Don't allow evil boot loaders, kernels, or |
| 379 | * userspace applications to deceive us: |
| 380 | */ |
Kyösti Mälkki | 894f6f8 | 2022-01-29 14:05:58 +0200 | [diff] [blame^] | 381 | if (CONFIG(SMM_LEGACY_ASEG)) |
Kyösti Mälkki | 6feb4da | 2019-07-13 17:28:37 +0300 | [diff] [blame] | 382 | aseg_smm_lock(); |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 383 | } |
| 384 | |
Elyes HAOUAS | 8aa5073 | 2018-05-13 13:34:58 +0200 | [diff] [blame] | 385 | static void i82801ix_lpc_read_resources(struct device *dev) |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 386 | { |
| 387 | /* |
| 388 | * I/O Resources |
| 389 | * |
| 390 | * 0x0000 - 0x000f....ISA DMA |
| 391 | * 0x0010 - 0x001f....ISA DMA aliases |
| 392 | * 0x0020 ~ 0x003d....PIC |
| 393 | * 0x002e - 0x002f....Maybe Super I/O |
| 394 | * 0x0040 - 0x0043....Timer |
| 395 | * 0x004e - 0x004f....Maybe Super I/O |
| 396 | * 0x0050 - 0x0053....Timer aliases |
| 397 | * 0x0061.............NMI_SC |
| 398 | * 0x0070.............NMI_EN (readable in alternative access mode) |
| 399 | * 0x0070 - 0x0077....RTC |
| 400 | * 0x0080 - 0x008f....ISA DMA |
| 401 | * 0x0090 ~ 0x009f....ISA DMA aliases |
| 402 | * 0x0092.............Fast A20 and Init |
| 403 | * 0x00a0 ~ 0x00bd....PIC |
| 404 | * 0x00b2 - 0x00b3....APM |
| 405 | * 0x00c0 ~ 0x00de....ISA DMA |
| 406 | * 0x00c1 ~ 0x00df....ISA DMA aliases |
| 407 | * 0x00f0.............Coprocessor Error |
Angel Pons | b21bffa | 2020-07-03 01:02:28 +0200 | [diff] [blame] | 408 | * (0x0400-0x041f)....SMBus (CONFIG_FIXED_SMBUS_IO_BASE, during raminit) |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 409 | * 0x04d0 - 0x04d1....PIC |
| 410 | * 0x0500 - 0x057f....PM (DEFAULT_PMBASE) |
| 411 | * 0x0580 - 0x05bf....SB GPIO (DEFAULT_GPIOBASE) |
| 412 | * 0x05c0 - 0x05ff....SB GPIO cont. (mobile only) |
| 413 | * 0x0cf8 - 0x0cff....PCI |
| 414 | * 0x0cf9.............Reset Control |
| 415 | */ |
| 416 | |
| 417 | struct resource *res; |
| 418 | |
| 419 | /* Get the normal PCI resources of this device. */ |
| 420 | pci_dev_read_resources(dev); |
| 421 | |
| 422 | /* Add an extra subtractive resource for both memory and I/O. */ |
| 423 | res = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0)); |
| 424 | res->base = 0; |
| 425 | res->size = 0x1000; |
| 426 | res->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | |
| 427 | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| 428 | |
| 429 | res = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0)); |
| 430 | res->base = 0xff800000; |
| 431 | res->size = 0x00800000; /* 8 MB for flash */ |
| 432 | res->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | |
| 433 | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| 434 | |
| 435 | res = new_resource(dev, 3); /* IOAPIC */ |
| 436 | res->base = IO_APIC_ADDR; |
| 437 | res->size = 0x00001000; |
| 438 | res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; |
| 439 | } |
| 440 | |
Arthur Heymans | e798e6a | 2017-12-23 23:09:54 +0100 | [diff] [blame] | 441 | static const char *lpc_acpi_name(const struct device *dev) |
| 442 | { |
| 443 | return "LPCB"; |
| 444 | } |
| 445 | |
Furquan Shaikh | 7536a39 | 2020-04-24 21:59:21 -0700 | [diff] [blame] | 446 | static void southbridge_fill_ssdt(const struct device *device) |
Vladimir Serbinenko | 36fa5b8 | 2014-10-28 23:43:20 +0100 | [diff] [blame] | 447 | { |
Kyösti Mälkki | c70eed1 | 2018-05-22 02:18:00 +0300 | [diff] [blame] | 448 | struct device *dev = pcidev_on_root(0x1f, 0); |
Vladimir Serbinenko | 36fa5b8 | 2014-10-28 23:43:20 +0100 | [diff] [blame] | 449 | config_t *chip = dev->chip_info; |
| 450 | |
| 451 | intel_acpi_pcie_hotplug_generator(chip->pcie_hotplug_map, 8); |
Arthur Heymans | e798e6a | 2017-12-23 23:09:54 +0100 | [diff] [blame] | 452 | intel_acpi_gen_def_acpi_pirq(device); |
Vladimir Serbinenko | 36fa5b8 | 2014-10-28 23:43:20 +0100 | [diff] [blame] | 453 | } |
Vladimir Serbinenko | 33769a5 | 2014-08-30 22:39:20 +0200 | [diff] [blame] | 454 | |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 455 | static struct device_operations device_ops = { |
| 456 | .read_resources = i82801ix_lpc_read_resources, |
| 457 | .set_resources = pci_dev_set_resources, |
| 458 | .enable_resources = pci_dev_enable_resources, |
Vladimir Serbinenko | 33769a5 | 2014-08-30 22:39:20 +0200 | [diff] [blame] | 459 | .write_acpi_tables = acpi_write_hpet, |
Nico Huber | 68680dd | 2020-03-31 17:34:52 +0200 | [diff] [blame] | 460 | .acpi_fill_ssdt = southbridge_fill_ssdt, |
Arthur Heymans | e798e6a | 2017-12-23 23:09:54 +0100 | [diff] [blame] | 461 | .acpi_name = lpc_acpi_name, |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 462 | .init = lpc_init, |
Nico Huber | 51b75ae | 2019-03-14 16:02:05 +0100 | [diff] [blame] | 463 | .scan_bus = scan_static_bus, |
Angel Pons | 1fc0edd | 2020-05-31 00:03:28 +0200 | [diff] [blame] | 464 | .ops_pci = &pci_dev_ops_pci, |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 465 | }; |
| 466 | |
| 467 | static const unsigned short pci_device_ids[] = { |
Felix Singer | 7f8b0cd | 2019-11-10 11:04:08 +0100 | [diff] [blame] | 468 | PCI_DEVICE_ID_INTEL_82801IH_LPC, /* ICH9DH */ |
| 469 | PCI_DEVICE_ID_INTEL_82801IO_LPC, /* ICH9DO */ |
| 470 | PCI_DEVICE_ID_INTEL_82801IR_LPC, /* ICH9R */ |
| 471 | PCI_DEVICE_ID_INTEL_82801IEM_LPC, /* ICH9M-E */ |
| 472 | PCI_DEVICE_ID_INTEL_82801IB_LPC, /* ICH9 */ |
| 473 | PCI_DEVICE_ID_INTEL_82801IBM_LPC, /* ICH9M */ |
Patrick Georgi | e72a8a3 | 2012-11-06 11:05:09 +0100 | [diff] [blame] | 474 | 0 |
| 475 | }; |
| 476 | |
| 477 | static const struct pci_driver ich9_lpc __pci_driver = { |
| 478 | .ops = &device_ops, |
| 479 | .vendor = PCI_VENDOR_ID_INTEL, |
| 480 | .devices = pci_device_ids, |
| 481 | }; |