src/mainboard/supermicro/x9scl/devicetree.cb

chip northbridge/intel/sandybridge
	device cpu_cluster 0 on
		chip cpu/intel/model_206ax # FIXME: check all registers
			register "acpi_c1" = "1"
			register "acpi_c2" = "3"
			register "acpi_c3" = "5"
			device lapic 0 on end
			device lapic 0xacac off end
		end
	end
	device domain 0 on
		subsystemid 0x15d9 0x0624 inherit
		device pci 00.0 on  end # Host bridge
		device pci 01.0 on  end # PEG
		device pci 01.1 on  end # PEG
		device pci 02.0 off end # iGPU
		device pci 06.0 on  end # PEG
		chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
			register "gen1_dec" = "0x00fc0a01" # NCT6776 SuperIO (0x0a00-0aff)
			register "gen2_dec" = "0x00fc1641" # WPCM450 SuperIO (0x1600-16ff)
			register "gen3_dec" = "0x00040ca1" # IPMI KCS (0x0ca0-0ca3)
			register "gen4_dec" = "0x001c03e1" # 3rd UART (0x03e0-03ff)
			register "pcie_port_coalesce" = "true"
			register "sata_interface_speed_support" = "0x3"
			register "sata_port_map" = "0x3f"
			register "spi_lvscc" = "0x2005"
			register "spi_uvscc" = "0x2005"
			device pci 16.0 off end # Management Engine Interface 1
			device pci 16.1 off end # Management Engine Interface 2
			device pci 16.2 off end # Management Engine IDE-R
			device pci 16.3 off end # Management Engine KT
			device pci 19.0 on	# Intel Gigabit Ethernet (not for X9SCL+-F)
				subsystemid 0x15d9 0x1502
			end
			device pci 1a.0 on  end # USB2 EHCI #2
			device pci 1b.0 off end # High Definition Audio
			device pci 1c.0 on  end # PCIe Port #1
			device pci 1c.1 off end # PCIe Port #2
			device pci 1c.2 off end # PCIe Port #3
			device pci 1c.3 off end # PCIe Port #4
			device pci 1c.4 on	# PCIe Port #5
				device pci 00.0 on end # primary 574 GigE
			end
			device pci 1c.5 off end # PCIe Port #6
			device pci 1c.6 on	# PCIe Port #7
				device pci 00.0 on end # secondary 574 GigE on X9SCL+-F
			end
			device pci 1c.7 off end # PCIe Port #8
			device pci 1d.0 on  end # USB2 EHCI #1
			device pci 1e.0 on      # PCI bridge
				device pci 03.0 on end # Matrox G200e in BMC
			end
			device pci 1f.0 on	# LPC bridge
				chip superio/nuvoton/nct6776
					device pnp 2e.0 off end		# Floppy
					device pnp 2e.1 off end		# Parallel port
					device pnp 2e.2 on		# COM1
						io 0x60 = 0x3f8
						irq 0x70 = 4
					end
					device pnp 2e.3 on		# COM2, IR
						io 0x60 = 0x2f8
						irq 0x70 = 3
					end
					device pnp 2e.5 on		# Keyboard
						io 0x60 = 0x060
						io 0x62	= 0x064
						irq 0x70 = 1
						irq 0x72 = 12
					end
					device pnp 2e.6 off end		# CIR
					device pnp 2e.7 off end		# GPIO6
					device pnp 2e.107 off end	# GPIO7
					device pnp 2e.207 off end	# GPIO8
					device pnp 2e.307 off end	# GPIO9
					device pnp 2e.8 off end		# WDT
					device pnp 2e.108 on end	# GPIO0
					device pnp 2e.208 off end	# GPIOA
					device pnp 2e.308 on		# GPIOBASE
						io 0x60 = 0xa80
					end
					device pnp 2e.109 off end	# GPIO1
					device pnp 2e.209 on		# GPIO2
					end
					device pnp 2e.309 on		# GPIO3
					end
					device pnp 2e.409 off end	# GPIO4
					device pnp 2e.509 off end	# GPIO5
					device pnp 2e.609 off end	# GPIO6
					device pnp 2e.709 off end	# GPIO7
					device pnp 2e.a off end		# ACPI
					device pnp 2e.b on		# HWM, front panel LED
						io 0x60 = 0xa30
						io 0x62 = 0
					end
					device pnp 2e.d off end		# VID
					device pnp 2e.e off end		# CIR WAKE-UP
					device pnp 2e.f off end		# GPIO
					device pnp 2e.14 off end	# SVID
					device pnp 2e.16 off end	# Deep sleep
					device pnp 2e.17 off end	# GPIOA
				end
				chip drivers/ipmi
					register "wait_for_bmc" = "1"
					register "bmc_boot_timeout" = "60"
					device pnp ca2.0 off end	# IPMI KCS
				end
				chip superio/nuvoton/wpcm450
					device pnp 164e.2 on
						io 0x60 = 0x03e8
						irq 0x70 = 10
					end
					device pnp 164e.3 off end
					device pnp 164e.6 off end
				end
			end
			device pci 1f.2 on  end # SATA Controller 1
			device pci 1f.3 on  end # SMBus
			device pci 1f.5 off end # SATA Controller 2
			device pci 1f.6 off end # Thermal
		end
	end
end