Patrick Georgi | ac95903 | 2020-05-05 22:49:26 +0200 | [diff] [blame] | 1 | /* SPDX-License-Identifier: GPL-2.0-or-later */ |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 2 | |
Elyes HAOUAS | aa8e7e7 | 2016-06-19 12:38:47 +0200 | [diff] [blame] | 3 | /* |
| 4 | * JEDEC Standard No. 21-C |
| 5 | * Annex K: Serial Presence Detect (SPD) for DDR3 SDRAM Modules 2014 |
| 6 | * http://www.jedec.org/sites/default/files/docs/4_01_02_11R24.pdf |
| 7 | */ |
| 8 | |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 9 | #ifndef DEVICE_DRAM_DDR3L_H |
| 10 | #define DEVICE_DRAM_DDR3L_H |
| 11 | |
| 12 | /** |
| 13 | * @file ddr3.h |
| 14 | * |
| 15 | * \brief Utilities for decoding DDR3 SPDs |
| 16 | */ |
| 17 | |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 18 | #include <spd.h> |
Arthur Heymans | fc31e44 | 2018-02-12 15:12:34 +0100 | [diff] [blame] | 19 | #include <device/dram/common.h> |
Patrick Rudolph | 24efe73 | 2018-08-19 11:06:06 +0200 | [diff] [blame] | 20 | #include <types.h> |
Arthur Heymans | fc31e44 | 2018-02-12 15:12:34 +0100 | [diff] [blame] | 21 | |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 22 | /** |
Matt DeVillier | 5aaa8ce | 2016-09-02 13:29:17 -0500 | [diff] [blame] | 23 | * Convenience definitions for SPD offsets |
| 24 | * |
| 25 | * @{ |
| 26 | */ |
| 27 | #define SPD_DIMM_MOD_ID1 117 |
| 28 | #define SPD_DIMM_MOD_ID2 118 |
| 29 | #define SPD_DIMM_SERIAL_NUM 122 |
| 30 | #define SPD_DIMM_SERIAL_LEN 4 |
| 31 | #define SPD_DIMM_PART_NUM 128 |
| 32 | #define SPD_DIMM_PART_LEN 18 |
| 33 | /** @} */ |
| 34 | |
| 35 | /** |
Martin Roth | f48acbd | 2020-07-24 12:24:27 -0600 | [diff] [blame] | 36 | * \brief Convenience macro for enabling printk with CONFIG(DEBUG_RAM_SETUP) |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 37 | * |
| 38 | * Use this macro instead of printk(); for verbose RAM initialization messages. |
Martin Roth | f48acbd | 2020-07-24 12:24:27 -0600 | [diff] [blame] | 39 | * When CONFIG(DEBUG_RAM_SETUP) is not selected, these messages are automatically |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 40 | * disabled. |
| 41 | * @{ |
| 42 | */ |
Julius Werner | cd49cce | 2019-03-05 16:53:33 -0800 | [diff] [blame] | 43 | #if CONFIG(DEBUG_RAM_SETUP) |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 44 | #define printram(x, ...) printk(BIOS_DEBUG, x, ##__VA_ARGS__) |
| 45 | #else |
| 46 | #define printram(x, ...) |
| 47 | #endif |
| 48 | /** @} */ |
| 49 | |
| 50 | /* |
| 51 | * Module type (byte 3, bits 3:0) of SPD |
Martin Roth | 0cb07e3 | 2013-07-09 21:46:01 -0600 | [diff] [blame] | 52 | * This definition is specific to DDR3. DDR2 SPDs have a different structure. |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 53 | */ |
| 54 | enum spd_dimm_type { |
| 55 | SPD_DIMM_TYPE_UNDEFINED = 0x00, |
| 56 | SPD_DIMM_TYPE_RDIMM = 0x01, |
| 57 | SPD_DIMM_TYPE_UDIMM = 0x02, |
| 58 | SPD_DIMM_TYPE_SO_DIMM = 0x03, |
| 59 | SPD_DIMM_TYPE_MICRO_DIMM = 0x04, |
| 60 | SPD_DIMM_TYPE_MINI_RDIMM = 0x05, |
| 61 | SPD_DIMM_TYPE_MINI_UDIMM = 0x06, |
| 62 | SPD_DIMM_TYPE_MINI_CDIMM = 0x07, |
| 63 | SPD_DIMM_TYPE_72B_SO_UDIMM = 0x08, |
| 64 | SPD_DIMM_TYPE_72B_SO_RDIMM = 0x09, |
| 65 | SPD_DIMM_TYPE_72B_SO_CDIMM = 0x0a, |
| 66 | SPD_DIMM_TYPE_LRDIMM = 0x0b, |
Elyes HAOUAS | aa8e7e7 | 2016-06-19 12:38:47 +0200 | [diff] [blame] | 67 | SPD_DIMM_TYPE_16B_SO_DIMM = 0x0c, |
| 68 | SPD_DIMM_TYPE_32B_SO_DIMM = 0x0d, |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 69 | /* Masks to bits 3:0 to give the dimm type */ |
| 70 | SPD_DIMM_TYPE_MASK = 0x0f, |
| 71 | }; |
| 72 | |
| 73 | /** |
| 74 | * \brief DIMM flags |
| 75 | * |
| 76 | * Characteristic flags for the DIMM, as presented by the SPD |
| 77 | */ |
Angel Pons | afb3d7e | 2021-03-28 13:43:13 +0200 | [diff] [blame^] | 78 | union dimm_flags_ddr3_st { |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 79 | /* The whole point of the union/struct construct is to allow us to clear |
| 80 | * all the bits with one line: flags.raw = 0. |
| 81 | * We do not care how these bits are ordered */ |
| 82 | struct { |
| 83 | /* Indicates if rank 1 of DIMM uses a mirrored pin mapping. See: |
| 84 | * Annex K: Serial Presence Detect (SPD) for DDR3 SDRAM */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 85 | unsigned int pins_mirrored:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 86 | /* Module can work at 1.50V - All DIMMS must be 1.5V operable */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 87 | unsigned int operable_1_50V:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 88 | /* Module can work at 1.35V */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 89 | unsigned int operable_1_35V:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 90 | /* Module can work at 1.20V */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 91 | unsigned int operable_1_25V:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 92 | /* Has an 8-bit bus extension, meaning the DIMM supports ECC */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 93 | unsigned int is_ecc:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 94 | /* DLL-Off Mode Support */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 95 | unsigned int dll_off_mode:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 96 | /* Indicates a drive strength of RZQ/6 (40 Ohm) is supported */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 97 | unsigned int rzq6_supported:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 98 | /* Indicates a drive strength of RZQ/7 (35 Ohm) is supported */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 99 | unsigned int rzq7_supported:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 100 | /* Partial Array Self Refresh */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 101 | unsigned int pasr:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 102 | /* On-die Thermal Sensor Readout */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 103 | unsigned int odts:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 104 | /* Auto Self Refresh */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 105 | unsigned int asr:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 106 | /* Extended temperature range supported */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 107 | unsigned int ext_temp_range:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 108 | /* Operating at extended temperature requires 2X refresh rate */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 109 | unsigned int ext_temp_refresh:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 110 | /* Thermal sensor incorporated */ |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 111 | unsigned int therm_sensor:1; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 112 | }; |
Lee Leahy | 0ca2a06 | 2017-03-06 18:01:04 -0800 | [diff] [blame] | 113 | unsigned int raw; |
Angel Pons | afb3d7e | 2021-03-28 13:43:13 +0200 | [diff] [blame^] | 114 | }; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 115 | |
| 116 | /** |
| 117 | * \brief DIMM characteristics |
| 118 | * |
| 119 | * The characteristics of each DIMM, as presented by the SPD |
| 120 | */ |
Angel Pons | afb3d7e | 2021-03-28 13:43:13 +0200 | [diff] [blame^] | 121 | struct dimm_attr_ddr3_st { |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 122 | enum spd_memory_type dram_type; |
Vladimir Serbinenko | 0e675f7 | 2014-12-07 13:56:48 +0100 | [diff] [blame] | 123 | enum spd_dimm_type dimm_type; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 124 | u16 cas_supported; |
| 125 | /* Flags extracted from SPD */ |
Angel Pons | afb3d7e | 2021-03-28 13:43:13 +0200 | [diff] [blame^] | 126 | union dimm_flags_ddr3_st flags; |
Vladimir Serbinenko | 7686a56 | 2014-05-18 11:05:56 +0200 | [diff] [blame] | 127 | /* SDRAM width */ |
| 128 | u8 width; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 129 | /* Number of ranks */ |
| 130 | u8 ranks; |
| 131 | /* Number or row address bits */ |
| 132 | u8 row_bits; |
| 133 | /* Number or column address bits */ |
| 134 | u8 col_bits; |
| 135 | /* Size of module in MiB */ |
| 136 | u32 size_mb; |
| 137 | /* Latencies are in units of 1/256 ns */ |
| 138 | u32 tCK; |
| 139 | u32 tAA; |
| 140 | u32 tWR; |
| 141 | u32 tRCD; |
| 142 | u32 tRRD; |
| 143 | u32 tRP; |
| 144 | u32 tRAS; |
| 145 | u32 tRC; |
| 146 | u32 tRFC; |
| 147 | u32 tWTR; |
| 148 | u32 tRTP; |
| 149 | u32 tFAW; |
Dan Elkouby | 0c02420 | 2018-04-13 18:45:02 +0300 | [diff] [blame] | 150 | u32 tCWL; |
| 151 | u16 tCMD; |
Vladimir Serbinenko | 7686a56 | 2014-05-18 11:05:56 +0200 | [diff] [blame] | 152 | |
| 153 | u8 reference_card; |
Patrick Rudolph | bd1fdc6 | 2016-01-26 08:45:21 +0100 | [diff] [blame] | 154 | /* XMP: Module voltage in mV */ |
| 155 | u16 voltage; |
| 156 | /* XMP: max DIMMs per channel supported (1-4) */ |
| 157 | u8 dimms_per_channel; |
Patrick Rudolph | 0769159 | 2016-02-29 18:21:00 +0100 | [diff] [blame] | 158 | /* Manufacturer ID */ |
| 159 | u16 manufacturer_id; |
| 160 | /* ASCII part number - NULL terminated */ |
| 161 | u8 part_number[17]; |
Patrick Rudolph | 15e6469 | 2018-08-17 15:24:56 +0200 | [diff] [blame] | 162 | /* Serial number */ |
| 163 | u8 serial[SPD_DIMM_SERIAL_LEN]; |
Angel Pons | afb3d7e | 2021-03-28 13:43:13 +0200 | [diff] [blame^] | 164 | }; |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 165 | |
Patrick Rudolph | bd1fdc6 | 2016-01-26 08:45:21 +0100 | [diff] [blame] | 166 | enum ddr3_xmp_profile { |
| 167 | DDR3_XMP_PROFILE_1 = 0, |
| 168 | DDR3_XMP_PROFILE_2 = 1, |
| 169 | }; |
| 170 | |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 171 | typedef u8 spd_raw_data[256]; |
| 172 | |
Alexandru Gagniuc | 4c37e58 | 2013-12-17 13:08:01 -0500 | [diff] [blame] | 173 | u16 spd_ddr3_calc_crc(u8 *spd, int len); |
Kyösti Mälkki | 7dc4b84 | 2016-11-18 18:41:17 +0200 | [diff] [blame] | 174 | u16 spd_ddr3_calc_unique_crc(u8 *spd, int len); |
Angel Pons | afb3d7e | 2021-03-28 13:43:13 +0200 | [diff] [blame^] | 175 | int spd_decode_ddr3(struct dimm_attr_ddr3_st *dimm, spd_raw_data spd_data); |
Patrick Rudolph | 6e53ae6 | 2017-01-31 19:43:17 +0100 | [diff] [blame] | 176 | int spd_dimm_is_registered_ddr3(enum spd_dimm_type type); |
Angel Pons | afb3d7e | 2021-03-28 13:43:13 +0200 | [diff] [blame^] | 177 | void dram_print_spd_ddr3(const struct dimm_attr_ddr3_st *dimm); |
| 178 | int spd_xmp_decode_ddr3(struct dimm_attr_ddr3_st *dimm, |
Lee Leahy | 708fc27 | 2017-03-07 12:18:53 -0800 | [diff] [blame] | 179 | spd_raw_data spd, |
| 180 | enum ddr3_xmp_profile profile); |
Patrick Rudolph | 24efe73 | 2018-08-19 11:06:06 +0200 | [diff] [blame] | 181 | enum cb_err spd_add_smbios17(const u8 channel, const u8 slot, |
| 182 | const u16 selected_freq, |
Angel Pons | afb3d7e | 2021-03-28 13:43:13 +0200 | [diff] [blame^] | 183 | const struct dimm_attr_ddr3_st *info); |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 184 | /** |
| 185 | * \brief Read double word from specified address |
| 186 | * |
| 187 | * Should be useful when doing an MRS to the DIMM |
| 188 | */ |
Stefan Reinauer | 1e2500e | 2015-06-19 14:59:06 -0700 | [diff] [blame] | 189 | static inline u32 volatile_read(volatile uintptr_t addr) |
Alexandru Gagniuc | f97ff3f | 2013-05-21 14:43:45 -0500 | [diff] [blame] | 190 | { |
| 191 | volatile u32 result; |
| 192 | result = *(volatile u32 *)addr; |
| 193 | return result; |
| 194 | } |
| 195 | |
Alexandru Gagniuc | 78706fd | 2013-06-03 13:58:10 -0500 | [diff] [blame] | 196 | /** |
| 197 | * \brief Representation of an MRS command |
| 198 | * |
| 199 | * This represents an MRS command as seen by the DIMM. This is not a memory |
| 200 | * address that can be read to generate an MRS command. The mapping of CPU |
| 201 | * to memory pins is hardware-dependent. |
| 202 | * \n |
| 203 | * The idea is to generalize the MRS code, and only need a hardware-specific |
| 204 | * function to map the MRS bits to CPU address bits. An MRS command can be |
| 205 | * sent like: |
| 206 | * @code{.c} |
| 207 | * u32 addr; |
| 208 | * mrs_cmd_t mrs; |
| 209 | * chipset_enable_mrs_command_mode(); |
| 210 | * mrs = ddr3_get_mr2(rtt_wr, srt, asr, cwl) |
| 211 | * if (rank_has_mirrorred_pins) |
| 212 | * mrs = ddr3_mrs_mirror_pins(mrs); |
| 213 | * addr = chipset_specific_get_mrs_addr(mrs); |
| 214 | * volatile_read(addr); |
| 215 | * @endcode |
| 216 | * |
| 217 | * The MRS representation has the following structure: |
| 218 | * - cmd[15:0] = Address pins MA[15:0] |
| 219 | * - cmd[18:16] = Bank address BA[2:0] |
| 220 | */ |
| 221 | typedef u32 mrs_cmd_t; |
| 222 | |
| 223 | enum ddr3_mr0_precharge { |
| 224 | DDR3_MR0_PRECHARGE_SLOW = 0, |
| 225 | DDR3_MR0_PRECHARGE_FAST = 1, |
| 226 | }; |
| 227 | enum ddr3_mr0_mode { |
| 228 | DDR3_MR0_MODE_NORMAL = 0, |
| 229 | DDR3_MR0_MODE_TEST = 1, |
| 230 | }; |
| 231 | enum ddr3_mr0_dll_reset { |
| 232 | DDR3_MR0_DLL_RESET_NO = 0, |
| 233 | DDR3_MR0_DLL_RESET_YES = 1, |
| 234 | }; |
| 235 | enum ddr3_mr0_burst_type { |
| 236 | DDR3_MR0_BURST_TYPE_SEQUENTIAL = 0, |
| 237 | DDR3_MR0_BURST_TYPE_INTERLEAVED = 1, |
| 238 | }; |
| 239 | enum ddr3_mr0_burst_length { |
| 240 | DDR3_MR0_BURST_LENGTH_8 = 0, |
| 241 | DDR3_MR0_BURST_LENGTH_CHOP = 1, |
| 242 | DDR3_MR0_BURST_LENGTH_4 = 2, |
| 243 | }; |
| 244 | mrs_cmd_t ddr3_get_mr0(enum ddr3_mr0_precharge precharge_pd, |
| 245 | u8 write_recovery, |
| 246 | enum ddr3_mr0_dll_reset dll_reset, |
| 247 | enum ddr3_mr0_mode mode, |
| 248 | u8 cas, |
| 249 | enum ddr3_mr0_burst_type interleaved_burst, |
| 250 | enum ddr3_mr0_burst_length burst_length); |
| 251 | |
| 252 | enum ddr3_mr1_qoff { |
| 253 | DDR3_MR1_QOFF_ENABLE = 0, |
| 254 | DDR3_MR1_QOFF_DISABLE = 1, |
| 255 | }; |
| 256 | enum ddr3_mr1_tqds { |
| 257 | DDR3_MR1_TQDS_DISABLE = 0, |
| 258 | DDR3_MR1_TQDS_ENABLE = 1, |
| 259 | }; |
| 260 | enum ddr3_mr1_write_leveling { |
| 261 | DDR3_MR1_WRLVL_DISABLE = 0, |
| 262 | DDR3_MR1_WRLVL_ENABLE = 1, |
| 263 | }; |
| 264 | enum ddr3_mr1_rtt_nom { |
| 265 | DDR3_MR1_RTT_NOM_OFF = 0, |
| 266 | DDR3_MR1_RTT_NOM_RZQ4 = 1, |
| 267 | DDR3_MR1_RTT_NOM_RZQ2 = 2, |
| 268 | DDR3_MR1_RTT_NOM_RZQ6 = 3, |
| 269 | DDR3_MR1_RTT_NOM_RZQ12 = 4, |
| 270 | DDR3_MR1_RTT_NOM_RZQ8 = 5, |
| 271 | }; |
| 272 | enum ddr3_mr1_additive_latency { |
| 273 | DDR3_MR1_AL_DISABLE = 0, |
| 274 | DDR3_MR1_AL_CL_MINUS_1 = 1, |
| 275 | DDR3_MR1_AL_CL_MINUS_2 = 2, |
| 276 | }; |
| 277 | enum ddr3_mr1_ods { |
| 278 | DDR3_MR1_ODS_RZQ6 = 0, |
| 279 | DDR3_MR1_ODS_RZQ7 = 1, |
| 280 | }; |
| 281 | enum ddr3_mr1_dll { |
| 282 | DDR3_MR1_DLL_ENABLE = 0, |
| 283 | DDR3_MR1_DLL_DISABLE = 1, |
| 284 | }; |
| 285 | |
| 286 | mrs_cmd_t ddr3_get_mr1(enum ddr3_mr1_qoff qoff, |
| 287 | enum ddr3_mr1_tqds tqds, |
| 288 | enum ddr3_mr1_rtt_nom rtt_nom, |
| 289 | enum ddr3_mr1_write_leveling write_leveling, |
| 290 | enum ddr3_mr1_ods output_drive_strenght, |
| 291 | enum ddr3_mr1_additive_latency additive_latency, |
| 292 | enum ddr3_mr1_dll dll_disable); |
| 293 | |
| 294 | enum ddr3_mr2_rttwr { |
| 295 | DDR3_MR2_RTTWR_OFF = 0, |
| 296 | DDR3_MR2_RTTWR_RZQ4 = 1, |
| 297 | DDR3_MR2_RTTWR_RZQ2 = 2, |
| 298 | }; |
| 299 | enum ddr3_mr2_srt_range { |
| 300 | DDR3_MR2_SRT_NORMAL = 0, |
| 301 | DDR3_MR2_SRT_EXTENDED = 1, |
| 302 | }; |
| 303 | enum ddr3_mr2_asr { |
| 304 | DDR3_MR2_ASR_MANUAL = 0, |
| 305 | DDR3_MR2_ASR_AUTO = 1, |
| 306 | }; |
| 307 | |
| 308 | mrs_cmd_t ddr3_get_mr2(enum ddr3_mr2_rttwr rtt_wr, |
| 309 | enum ddr3_mr2_srt_range extended_temp, |
| 310 | enum ddr3_mr2_asr self_refresh, u8 cas_cwl); |
| 311 | |
| 312 | mrs_cmd_t ddr3_get_mr3(char dataflow_from_mpr); |
| 313 | mrs_cmd_t ddr3_mrs_mirror_pins(mrs_cmd_t cmd); |
| 314 | |
Martin Roth | fd277d8 | 2016-01-11 12:47:30 -0700 | [diff] [blame] | 315 | #endif /* DEVICE_DRAM_DDR3L_H */ |