src/include: Fix unsigned warnings
Fix warning detected by checkpatch.pl:
WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
BRANCH=none
BUG=None
TEST=Build and run on Galileo Gen2
Change-Id: I23d9b4b715aa74acc387db8fb8d3c73bd5cabfaa
Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18607
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <martinroth@google.com>
diff --git a/src/include/device/dram/ddr3.h b/src/include/device/dram/ddr3.h
index 905aa84..bc9fca7 100644
--- a/src/include/device/dram/ddr3.h
+++ b/src/include/device/dram/ddr3.h
@@ -106,35 +106,35 @@
struct {
/* Indicates if rank 1 of DIMM uses a mirrored pin mapping. See:
* Annex K: Serial Presence Detect (SPD) for DDR3 SDRAM */
- unsigned pins_mirrored:1;
+ unsigned int pins_mirrored:1;
/* Module can work at 1.50V - All DIMMS must be 1.5V operable */
- unsigned operable_1_50V:1;
+ unsigned int operable_1_50V:1;
/* Module can work at 1.35V */
- unsigned operable_1_35V:1;
+ unsigned int operable_1_35V:1;
/* Module can work at 1.20V */
- unsigned operable_1_25V:1;
+ unsigned int operable_1_25V:1;
/* Has an 8-bit bus extension, meaning the DIMM supports ECC */
- unsigned is_ecc:1;
+ unsigned int is_ecc:1;
/* DLL-Off Mode Support */
- unsigned dll_off_mode:1;
+ unsigned int dll_off_mode:1;
/* Indicates a drive strength of RZQ/6 (40 Ohm) is supported */
- unsigned rzq6_supported:1;
+ unsigned int rzq6_supported:1;
/* Indicates a drive strength of RZQ/7 (35 Ohm) is supported */
- unsigned rzq7_supported:1;
+ unsigned int rzq7_supported:1;
/* Partial Array Self Refresh */
- unsigned pasr:1;
+ unsigned int pasr:1;
/* On-die Thermal Sensor Readout */
- unsigned odts:1;
+ unsigned int odts:1;
/* Auto Self Refresh */
- unsigned asr:1;
+ unsigned int asr:1;
/* Extended temperature range supported */
- unsigned ext_temp_range:1;
+ unsigned int ext_temp_range:1;
/* Operating at extended temperature requires 2X refresh rate */
- unsigned ext_temp_refresh:1;
+ unsigned int ext_temp_refresh:1;
/* Thermal sensor incorporated */
- unsigned therm_sensor:1;
+ unsigned int therm_sensor:1;
};
- unsigned raw;
+ unsigned int raw;
} dimm_flags_t;
/**