Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 1 | /* |
| 2 | * This file is part of the coreboot project. |
| 3 | * |
| 4 | * Copyright (C) 2014 Google Inc. |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 5 | * Copyright (C) 2015 Intel Corporation. |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 6 | * |
| 7 | * This program is free software; you can redistribute it and/or modify |
| 8 | * it under the terms of the GNU General Public License as published by |
| 9 | * the Free Software Foundation; version 2 of the License. |
| 10 | * |
| 11 | * This program is distributed in the hope that it will be useful, |
| 12 | * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 13 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 14 | * GNU General Public License for more details. |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 15 | */ |
| 16 | |
| 17 | /* |
| 18 | * Helper functions for dealing with power management registers |
| 19 | * and the differences between PCH variants. |
| 20 | */ |
| 21 | |
Duncan Laurie | f0ba225 | 2016-10-25 20:03:56 -0700 | [diff] [blame] | 22 | #define __SIMPLE_DEVICE__ |
| 23 | |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 24 | #include <arch/io.h> |
| 25 | #include <device/device.h> |
| 26 | #include <device/pci.h> |
| 27 | #include <device/pci_def.h> |
| 28 | #include <console/console.h> |
Aaron Durbin | 38613d0 | 2016-07-14 00:56:58 -0500 | [diff] [blame] | 29 | #include <halt.h> |
Furquan Shaikh | 97e0a65 | 2016-08-18 21:42:36 -0700 | [diff] [blame] | 30 | #include <rules.h> |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 31 | #include <stdlib.h> |
Duncan Laurie | f0ba225 | 2016-10-25 20:03:56 -0700 | [diff] [blame] | 32 | #include <soc/gpe.h> |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 33 | #include <soc/gpio.h> |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 34 | #include <soc/iomap.h> |
| 35 | #include <soc/lpc.h> |
| 36 | #include <soc/pci_devs.h> |
| 37 | #include <soc/pm.h> |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 38 | #include <soc/pmc.h> |
| 39 | #include <soc/smbus.h> |
Duncan Laurie | 2f3736e | 2016-11-03 10:33:43 -0700 | [diff] [blame] | 40 | #include <timer.h> |
Duncan Laurie | f0ba225 | 2016-10-25 20:03:56 -0700 | [diff] [blame] | 41 | #include "chip.h" |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 42 | |
| 43 | /* Print status bits with descriptive names */ |
Lee Leahy | f4c4ab9 | 2017-03-16 17:08:03 -0700 | [diff] [blame] | 44 | static void print_status_bits(u32 status, const char * const bit_names[]) |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 45 | { |
| 46 | int i; |
| 47 | |
| 48 | if (!status) |
| 49 | return; |
| 50 | |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 51 | for (i = 31; i >= 0; i--) { |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 52 | if (status & (1 << i)) { |
| 53 | if (bit_names[i]) |
| 54 | printk(BIOS_DEBUG, "%s ", bit_names[i]); |
| 55 | else |
| 56 | printk(BIOS_DEBUG, "BIT%d ", i); |
| 57 | } |
| 58 | } |
| 59 | } |
| 60 | |
| 61 | /* Print status bits as GPIO numbers */ |
| 62 | static void print_gpio_status(u32 status, int start) |
| 63 | { |
| 64 | int i; |
| 65 | |
| 66 | if (!status) |
| 67 | return; |
| 68 | |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 69 | for (i = 31; i >= 0; i--) { |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 70 | if (status & (1 << i)) |
| 71 | printk(BIOS_DEBUG, "GPIO%d ", start + i); |
| 72 | } |
| 73 | } |
| 74 | |
| 75 | |
| 76 | /* |
| 77 | * PM1_CNT |
| 78 | */ |
| 79 | |
| 80 | /* Enable events in PM1 control register */ |
| 81 | void enable_pm1_control(u32 mask) |
| 82 | { |
| 83 | u32 pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); |
| 84 | pm1_cnt |= mask; |
| 85 | outl(pm1_cnt, ACPI_BASE_ADDRESS + PM1_CNT); |
| 86 | } |
| 87 | |
| 88 | /* Disable events in PM1 control register */ |
| 89 | void disable_pm1_control(u32 mask) |
| 90 | { |
| 91 | u32 pm1_cnt = inl(ACPI_BASE_ADDRESS + PM1_CNT); |
| 92 | pm1_cnt &= ~mask; |
| 93 | outl(pm1_cnt, ACPI_BASE_ADDRESS + PM1_CNT); |
| 94 | } |
| 95 | |
| 96 | |
| 97 | /* |
| 98 | * PM1 |
| 99 | */ |
| 100 | |
| 101 | /* Clear and return PM1 status register */ |
| 102 | static u16 reset_pm1_status(void) |
| 103 | { |
| 104 | u16 pm1_sts = inw(ACPI_BASE_ADDRESS + PM1_STS); |
| 105 | outw(pm1_sts, ACPI_BASE_ADDRESS + PM1_STS); |
| 106 | return pm1_sts; |
| 107 | } |
| 108 | |
| 109 | /* Print PM1 status bits */ |
| 110 | static u16 print_pm1_status(u16 pm1_sts) |
| 111 | { |
Lee Leahy | f4c4ab9 | 2017-03-16 17:08:03 -0700 | [diff] [blame] | 112 | static const char * const pm1_sts_bits[] = { |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 113 | [0] = "TMROF", |
| 114 | [4] = "BM", |
| 115 | [5] = "GBL", |
| 116 | [8] = "PWRBTN", |
| 117 | [10] = "RTC", |
| 118 | [11] = "PRBTNOR", |
| 119 | [14] = "PCIEXPWAK", |
| 120 | [15] = "WAK", |
| 121 | }; |
| 122 | |
| 123 | if (!pm1_sts) |
| 124 | return 0; |
| 125 | |
| 126 | printk(BIOS_SPEW, "PM1_STS: "); |
| 127 | print_status_bits(pm1_sts, pm1_sts_bits); |
| 128 | printk(BIOS_SPEW, "\n"); |
| 129 | |
| 130 | return pm1_sts; |
| 131 | } |
| 132 | |
| 133 | /* Print, clear, and return PM1 status */ |
| 134 | u16 clear_pm1_status(void) |
| 135 | { |
| 136 | return print_pm1_status(reset_pm1_status()); |
| 137 | } |
| 138 | |
| 139 | /* Set the PM1 register to events */ |
| 140 | void enable_pm1(u16 events) |
| 141 | { |
| 142 | outw(events, ACPI_BASE_ADDRESS + PM1_EN); |
| 143 | } |
| 144 | |
Furquan Shaikh | aeb2d64 | 2017-08-17 18:28:41 -0700 | [diff] [blame] | 145 | /* |
| 146 | * Update supplied events in PM1_EN register. This does not disable any already |
| 147 | * set events. |
| 148 | */ |
| 149 | void update_pm1_enable(u16 events) |
| 150 | { |
| 151 | u16 pm1_en = read_pm1_enable(); |
| 152 | pm1_en |= events; |
| 153 | enable_pm1(pm1_en); |
| 154 | } |
| 155 | |
| 156 | /* Read events set in PM1_EN register. */ |
| 157 | uint16_t read_pm1_enable(void) |
| 158 | { |
| 159 | return inw(ACPI_BASE_ADDRESS + PM1_EN); |
| 160 | } |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 161 | |
| 162 | /* |
| 163 | * SMI |
| 164 | */ |
| 165 | |
| 166 | /* Clear and return SMI status register */ |
| 167 | static u32 reset_smi_status(void) |
| 168 | { |
| 169 | u32 smi_sts = inl(ACPI_BASE_ADDRESS + SMI_STS); |
| 170 | outl(smi_sts, ACPI_BASE_ADDRESS + SMI_STS); |
| 171 | return smi_sts; |
| 172 | } |
| 173 | |
| 174 | /* Print SMI status bits */ |
| 175 | static u32 print_smi_status(u32 smi_sts) |
| 176 | { |
Lee Leahy | f4c4ab9 | 2017-03-16 17:08:03 -0700 | [diff] [blame] | 177 | static const char * const smi_sts_bits[] = { |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 178 | [2] = "BIOS", |
| 179 | [3] = "LEGACY_USB", |
| 180 | [4] = "SLP_SMI", |
| 181 | [5] = "APM", |
| 182 | [6] = "SWSMI_TMR", |
| 183 | [8] = "PM1", |
| 184 | [9] = "GPE0", |
| 185 | [10] = "GPI", |
| 186 | [11] = "MCSMI", |
| 187 | [12] = "DEVMON", |
| 188 | [13] = "TCO", |
| 189 | [14] = "PERIODIC", |
| 190 | [15] = "SERIRQ_SMI", |
| 191 | [16] = "SMBUS_SMI", |
| 192 | [17] = "LEGACY_USB2", |
| 193 | [18] = "INTEL_USB2", |
| 194 | [20] = "PCI_EXP_SMI", |
| 195 | [21] = "MONITOR", |
| 196 | [26] = "SPI", |
Duncan Laurie | 8d01902 | 2016-10-25 19:58:27 -0700 | [diff] [blame] | 197 | [27] = "GPIO_UNLOCK", |
| 198 | [28] = "ESPI_SMI", |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 199 | }; |
| 200 | |
| 201 | if (!smi_sts) |
| 202 | return 0; |
| 203 | |
| 204 | printk(BIOS_DEBUG, "SMI_STS: "); |
| 205 | print_status_bits(smi_sts, smi_sts_bits); |
| 206 | printk(BIOS_DEBUG, "\n"); |
| 207 | |
| 208 | return smi_sts; |
| 209 | } |
| 210 | |
| 211 | /* Print, clear, and return SMI status */ |
| 212 | u32 clear_smi_status(void) |
| 213 | { |
| 214 | return print_smi_status(reset_smi_status()); |
| 215 | } |
| 216 | |
| 217 | /* Enable SMI event */ |
| 218 | void enable_smi(u32 mask) |
| 219 | { |
| 220 | u32 smi_en = inl(ACPI_BASE_ADDRESS + SMI_EN); |
| 221 | smi_en |= mask; |
| 222 | outl(smi_en, ACPI_BASE_ADDRESS + SMI_EN); |
| 223 | } |
| 224 | |
| 225 | /* Disable SMI event */ |
| 226 | void disable_smi(u32 mask) |
| 227 | { |
| 228 | u32 smi_en = inl(ACPI_BASE_ADDRESS + SMI_EN); |
| 229 | smi_en &= ~mask; |
| 230 | outl(smi_en, ACPI_BASE_ADDRESS + SMI_EN); |
| 231 | } |
| 232 | |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 233 | /* |
| 234 | * TCO |
| 235 | */ |
| 236 | |
| 237 | /* Clear TCO status and return events that are enabled and active */ |
| 238 | static u32 reset_tco_status(void) |
| 239 | { |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 240 | u16 tco1_sts; |
| 241 | u16 tco2_sts; |
| 242 | u16 tcobase; |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 243 | |
Barnali Sarkar | 49eca13 | 2016-08-12 00:05:27 +0530 | [diff] [blame] | 244 | tcobase = smbus_tco_regs(); |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 245 | |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 246 | /* TCO Status 2 register*/ |
| 247 | tco2_sts = inw(tcobase + TCO2_STS); |
| 248 | tco2_sts |= (TCO2_STS_SECOND_TO | TCO2_STS_BOOT); |
| 249 | outw(tco2_sts, tcobase + TCO2_STS); |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 250 | |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 251 | /* TCO Status 1 register*/ |
| 252 | tco1_sts = inw(tcobase + TCO1_STS); |
| 253 | |
| 254 | /* Clear SECOND_TO_STS bit */ |
| 255 | if (tco2_sts & TCO2_STS_SECOND_TO) |
| 256 | outw(tco2_sts & ~TCO2_STS_SECOND_TO, tcobase + TCO2_STS); |
| 257 | |
| 258 | return (tco2_sts << 16) | tco1_sts; |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 259 | } |
| 260 | |
| 261 | /* Print TCO status bits */ |
| 262 | static u32 print_tco_status(u32 tco_sts) |
| 263 | { |
Lee Leahy | f4c4ab9 | 2017-03-16 17:08:03 -0700 | [diff] [blame] | 264 | static const char * const tco_sts_bits[] = { |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 265 | [0] = "NMI2SMI", |
| 266 | [1] = "SW_TCO", |
| 267 | [2] = "TCO_INT", |
| 268 | [3] = "TIMEOUT", |
| 269 | [7] = "NEWCENTURY", |
| 270 | [8] = "BIOSWR", |
| 271 | [9] = "DMISCI", |
| 272 | [10] = "DMISMI", |
| 273 | [12] = "DMISERR", |
| 274 | [13] = "SLVSEL", |
| 275 | [16] = "INTRD_DET", |
| 276 | [17] = "SECOND_TO", |
| 277 | [18] = "BOOT", |
| 278 | [20] = "SMLINK_SLV" |
| 279 | }; |
| 280 | |
| 281 | if (!tco_sts) |
| 282 | return 0; |
| 283 | |
| 284 | printk(BIOS_DEBUG, "TCO_STS: "); |
| 285 | print_status_bits(tco_sts, tco_sts_bits); |
| 286 | printk(BIOS_DEBUG, "\n"); |
| 287 | |
| 288 | return tco_sts; |
| 289 | } |
| 290 | |
| 291 | /* Print, clear, and return TCO status */ |
| 292 | u32 clear_tco_status(void) |
| 293 | { |
| 294 | return print_tco_status(reset_tco_status()); |
| 295 | } |
| 296 | |
| 297 | /* Enable TCO SCI */ |
| 298 | void enable_tco_sci(void) |
| 299 | { |
| 300 | /* Clear pending events */ |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 301 | outl(TCOSCI_STS, ACPI_BASE_ADDRESS + GPE0_STS(3)); |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 302 | |
| 303 | /* Enable TCO SCI events */ |
| 304 | enable_gpe(TCOSCI_EN); |
| 305 | } |
| 306 | |
| 307 | |
| 308 | /* |
| 309 | * GPE0 |
| 310 | */ |
| 311 | |
| 312 | /* Clear a GPE0 status and return events that are enabled and active */ |
| 313 | static u32 reset_gpe(u16 sts_reg, u16 en_reg) |
| 314 | { |
| 315 | u32 gpe0_sts = inl(ACPI_BASE_ADDRESS + sts_reg); |
| 316 | u32 gpe0_en = inl(ACPI_BASE_ADDRESS + en_reg); |
| 317 | |
| 318 | outl(gpe0_sts, ACPI_BASE_ADDRESS + sts_reg); |
| 319 | |
| 320 | /* Only report enabled events */ |
| 321 | return gpe0_sts & gpe0_en; |
| 322 | } |
| 323 | |
| 324 | /* Print GPE0 status bits */ |
Lee Leahy | f4c4ab9 | 2017-03-16 17:08:03 -0700 | [diff] [blame] | 325 | static u32 print_gpe_status(u32 gpe0_sts, const char * const bit_names[]) |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 326 | { |
| 327 | if (!gpe0_sts) |
| 328 | return 0; |
| 329 | |
| 330 | printk(BIOS_DEBUG, "GPE0_STS: "); |
| 331 | print_status_bits(gpe0_sts, bit_names); |
| 332 | printk(BIOS_DEBUG, "\n"); |
| 333 | |
| 334 | return gpe0_sts; |
| 335 | } |
| 336 | |
| 337 | /* Print GPE0 GPIO status bits */ |
| 338 | static u32 print_gpe_gpio(u32 gpe0_sts, int start) |
| 339 | { |
| 340 | if (!gpe0_sts) |
| 341 | return 0; |
| 342 | |
| 343 | printk(BIOS_DEBUG, "GPE0_STS: "); |
| 344 | print_gpio_status(gpe0_sts, start); |
| 345 | printk(BIOS_DEBUG, "\n"); |
| 346 | |
| 347 | return gpe0_sts; |
| 348 | } |
| 349 | |
| 350 | /* Clear all GPE status and return "standard" GPE event status */ |
| 351 | u32 clear_gpe_status(void) |
| 352 | { |
Lee Leahy | f4c4ab9 | 2017-03-16 17:08:03 -0700 | [diff] [blame] | 353 | static const char * const gpe0_sts_3_bits[] = { |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 354 | [1] = "HOTPLUG", |
| 355 | [2] = "SWGPE", |
| 356 | [6] = "TCO_SCI", |
| 357 | [7] = "SMB_WAK", |
| 358 | [9] = "PCI_EXP", |
| 359 | [10] = "BATLOW", |
| 360 | [11] = "PME", |
| 361 | [12] = "ME", |
| 362 | [13] = "PME_B0", |
Aaron Durbin | 7f78849 | 2015-07-24 17:10:31 -0500 | [diff] [blame] | 363 | [14] = "eSPI", |
| 364 | [15] = "GPIO Tier-2", |
| 365 | [16] = "LAN_WAKE", |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 366 | [18] = "WADT" |
| 367 | }; |
| 368 | |
| 369 | print_gpe_gpio(reset_gpe(GPE0_STS(GPE_31_0), GPE0_EN(GPE_31_0)), 0); |
| 370 | print_gpe_gpio(reset_gpe(GPE0_STS(GPE_63_32), GPE0_EN(GPE_63_32)), 32); |
Aaron Durbin | 7f78849 | 2015-07-24 17:10:31 -0500 | [diff] [blame] | 371 | print_gpe_gpio(reset_gpe(GPE0_STS(GPE_95_64), GPE0_EN(GPE_95_64)), 64); |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 372 | return print_gpe_status(reset_gpe(GPE0_STS(GPE_STD), GPE0_EN(GPE_STD)), |
| 373 | gpe0_sts_3_bits); |
| 374 | } |
| 375 | |
Duncan Laurie | 64ce1d1 | 2016-10-25 20:05:31 -0700 | [diff] [blame] | 376 | /* Read and clear GPE status (defined in arch/acpi.h) */ |
| 377 | int acpi_get_gpe(int gpe) |
| 378 | { |
| 379 | int bank; |
| 380 | uint32_t mask, sts; |
Duncan Laurie | 2f3736e | 2016-11-03 10:33:43 -0700 | [diff] [blame] | 381 | struct stopwatch sw; |
| 382 | int rc = 0; |
Duncan Laurie | 64ce1d1 | 2016-10-25 20:05:31 -0700 | [diff] [blame] | 383 | |
| 384 | if (gpe < 0 || gpe > GPE0_WADT) |
| 385 | return -1; |
| 386 | |
| 387 | bank = gpe / 32; |
| 388 | mask = 1 << (gpe % 32); |
| 389 | |
Duncan Laurie | 2f3736e | 2016-11-03 10:33:43 -0700 | [diff] [blame] | 390 | /* Wait up to 1ms for GPE status to clear */ |
| 391 | stopwatch_init_msecs_expire(&sw, 1); |
| 392 | do { |
| 393 | if (stopwatch_expired(&sw)) |
| 394 | return rc; |
| 395 | |
| 396 | sts = inl(ACPI_BASE_ADDRESS + GPE0_STS(bank)); |
| 397 | if (sts & mask) { |
| 398 | outl(mask, ACPI_BASE_ADDRESS + GPE0_STS(bank)); |
| 399 | rc = 1; |
| 400 | } |
| 401 | } while (sts & mask); |
| 402 | |
| 403 | return rc; |
Duncan Laurie | 64ce1d1 | 2016-10-25 20:05:31 -0700 | [diff] [blame] | 404 | } |
| 405 | |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 406 | /* Enable all requested GPE */ |
| 407 | void enable_all_gpe(u32 set1, u32 set2, u32 set3, u32 set4) |
| 408 | { |
| 409 | outl(set1, ACPI_BASE_ADDRESS + GPE0_EN(GPE_31_0)); |
| 410 | outl(set2, ACPI_BASE_ADDRESS + GPE0_EN(GPE_63_32)); |
Aaron Durbin | 7f78849 | 2015-07-24 17:10:31 -0500 | [diff] [blame] | 411 | outl(set3, ACPI_BASE_ADDRESS + GPE0_EN(GPE_95_64)); |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 412 | outl(set4, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); |
| 413 | } |
| 414 | |
| 415 | /* Disable all GPE */ |
| 416 | void disable_all_gpe(void) |
| 417 | { |
| 418 | enable_all_gpe(0, 0, 0, 0); |
| 419 | } |
| 420 | |
| 421 | /* Enable a standard GPE */ |
| 422 | void enable_gpe(u32 mask) |
| 423 | { |
| 424 | u32 gpe0_en = inl(ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); |
| 425 | gpe0_en |= mask; |
| 426 | outl(gpe0_en, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); |
| 427 | } |
| 428 | |
| 429 | /* Disable a standard GPE */ |
| 430 | void disable_gpe(u32 mask) |
| 431 | { |
| 432 | u32 gpe0_en = inl(ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); |
| 433 | gpe0_en &= ~mask; |
| 434 | outl(gpe0_en, ACPI_BASE_ADDRESS + GPE0_EN(GPE_STD)); |
| 435 | } |
| 436 | |
| 437 | int acpi_sci_irq(void) |
| 438 | { |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 439 | int scis = pci_read_config32(PCH_DEV_PMC, ACTL) & SCI_IRQ_SEL; |
Lee Leahy | b000513 | 2015-05-12 18:19:47 -0700 | [diff] [blame] | 440 | int sci_irq = 9; |
| 441 | |
| 442 | /* Determine how SCI is routed. */ |
| 443 | switch (scis) { |
| 444 | case SCIS_IRQ9: |
| 445 | case SCIS_IRQ10: |
| 446 | case SCIS_IRQ11: |
| 447 | sci_irq = scis - SCIS_IRQ9 + 9; |
| 448 | break; |
| 449 | case SCIS_IRQ20: |
| 450 | case SCIS_IRQ21: |
| 451 | case SCIS_IRQ22: |
| 452 | case SCIS_IRQ23: |
| 453 | sci_irq = scis - SCIS_IRQ20 + 20; |
| 454 | break; |
| 455 | default: |
| 456 | printk(BIOS_DEBUG, "Invalid SCI route! Defaulting to IRQ9.\n"); |
| 457 | sci_irq = 9; |
| 458 | break; |
| 459 | } |
| 460 | |
| 461 | printk(BIOS_DEBUG, "SCI is IRQ%d\n", sci_irq); |
| 462 | return sci_irq; |
| 463 | } |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 464 | |
| 465 | uint8_t *pmc_mmio_regs(void) |
| 466 | { |
| 467 | uint32_t reg32; |
| 468 | |
| 469 | reg32 = pci_read_config32(PCH_DEV_PMC, PWRMBASE); |
| 470 | |
| 471 | /* 4KiB alignment. */ |
| 472 | reg32 &= ~0xfff; |
| 473 | |
| 474 | return (void *)(uintptr_t)reg32; |
| 475 | } |
| 476 | |
Barnali Sarkar | 49eca13 | 2016-08-12 00:05:27 +0530 | [diff] [blame] | 477 | uint16_t smbus_tco_regs(void) |
Lee Leahy | 1d14b3e | 2015-05-12 18:23:27 -0700 | [diff] [blame] | 478 | { |
| 479 | uint16_t reg16; |
| 480 | |
| 481 | reg16 = pci_read_config16(PCH_DEV_SMBUS, TCOBASE); |
| 482 | |
| 483 | reg16 &= ~0x1f; |
| 484 | |
| 485 | return reg16; |
| 486 | } |
Aaron Durbin | 38613d0 | 2016-07-14 00:56:58 -0500 | [diff] [blame] | 487 | |
| 488 | void poweroff(void) |
| 489 | { |
| 490 | enable_pm1_control(SLP_EN | (SLP_TYP_S5 << SLP_TYP_SHIFT)); |
Furquan Shaikh | 97e0a65 | 2016-08-18 21:42:36 -0700 | [diff] [blame] | 491 | |
| 492 | /* |
| 493 | * Setting SLP_TYP_S5 in PM1 triggers SLP_SMI, which is handled by SMM |
| 494 | * to transition to S5 state. If halt is called in SMM, then it prevents |
| 495 | * the SMI handler from being triggered and system never enters S5. |
| 496 | */ |
| 497 | if (!ENV_SMM) |
| 498 | halt(); |
Aaron Durbin | 38613d0 | 2016-07-14 00:56:58 -0500 | [diff] [blame] | 499 | } |
Duncan Laurie | f0ba225 | 2016-10-25 20:03:56 -0700 | [diff] [blame] | 500 | |
| 501 | void pmc_gpe_init(void) |
| 502 | { |
Aaron Durbin | e4d7abc | 2017-04-16 22:05:36 -0500 | [diff] [blame] | 503 | DEVTREE_CONST struct soc_intel_skylake_config *config; |
| 504 | DEVTREE_CONST struct device *dev = dev_find_slot(0, PCH_DEVFN_PMC); |
Duncan Laurie | f0ba225 | 2016-10-25 20:03:56 -0700 | [diff] [blame] | 505 | uint8_t *pmc_regs; |
| 506 | uint32_t gpio_cfg; |
| 507 | uint32_t gpio_cfg_reg; |
| 508 | const uint32_t gpio_cfg_mask = |
| 509 | (GPE0_DWX_MASK << GPE0_DW0_SHIFT) | |
| 510 | (GPE0_DWX_MASK << GPE0_DW1_SHIFT) | |
| 511 | (GPE0_DWX_MASK << GPE0_DW2_SHIFT); |
| 512 | |
| 513 | /* Look up the device in devicetree */ |
| 514 | if (!dev || !dev->chip_info) { |
| 515 | printk(BIOS_ERR, "BUG! Could not find SOC devicetree config\n"); |
| 516 | return; |
| 517 | } |
| 518 | config = dev->chip_info; |
| 519 | pmc_regs = pmc_mmio_regs(); |
| 520 | |
| 521 | /* Route the GPIOs to the GPE0 block. Determine that all values |
| 522 | * are different, and if they aren't use the reset values. */ |
| 523 | gpio_cfg = 0; |
| 524 | if (config->gpe0_dw0 == config->gpe0_dw1 || |
| 525 | config->gpe0_dw1 == config->gpe0_dw2) { |
| 526 | printk(BIOS_INFO, "PMC: Using default GPE route.\n"); |
| 527 | gpio_cfg = read32(pmc_regs + GPIO_CFG); |
| 528 | } else { |
| 529 | gpio_cfg |= (uint32_t)config->gpe0_dw0 << GPE0_DW0_SHIFT; |
| 530 | gpio_cfg |= (uint32_t)config->gpe0_dw1 << GPE0_DW1_SHIFT; |
| 531 | gpio_cfg |= (uint32_t)config->gpe0_dw2 << GPE0_DW2_SHIFT; |
| 532 | } |
| 533 | gpio_cfg_reg = read32(pmc_regs + GPIO_CFG) & ~gpio_cfg_mask; |
| 534 | gpio_cfg_reg |= gpio_cfg & gpio_cfg_mask; |
| 535 | write32(pmc_regs + GPIO_CFG, gpio_cfg_reg); |
| 536 | |
| 537 | /* Set the routes in the GPIO communities as well. */ |
| 538 | gpio_route_gpe(gpio_cfg_reg >> GPE0_DW0_SHIFT); |
| 539 | |
| 540 | /* Set GPE enables based on devictree. */ |
| 541 | enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2, |
| 542 | config->gpe0_en_3, config->gpe0_en_4); |
| 543 | } |
Aaron Durbin | d1fc8c1 | 2017-09-15 12:37:05 -0600 | [diff] [blame] | 544 | |
| 545 | int rtc_failure(void) |
| 546 | { |
| 547 | u8 reg8; |
| 548 | int rtc_failed; |
| 549 | /* PMC Controller Device 0x1F, Func 02 */ |
| 550 | device_t dev = PCH_DEV_PMC; |
| 551 | reg8 = pci_read_config8(dev, GEN_PMCON_B); |
| 552 | rtc_failed = reg8 & RTC_BATTERY_DEAD; |
| 553 | if (rtc_failed) { |
| 554 | reg8 &= ~RTC_BATTERY_DEAD; |
| 555 | pci_write_config8(dev, GEN_PMCON_B, reg8); |
| 556 | printk(BIOS_DEBUG, "rtc_failed = 0x%x\n", rtc_failed); |
| 557 | } |
| 558 | |
| 559 | return !!rtc_failed; |
| 560 | } |