Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 1 | chip northbridge/intel/sandybridge |
Vladimir Serbinenko | dd2bc3f | 2014-10-31 09:16:31 +0100 | [diff] [blame] | 2 | # IGD Displays |
Nico Huber | b0b25c8 | 2020-03-21 20:35:12 +0100 | [diff] [blame] | 3 | register "gfx" = "GMA_STATIC_DISPLAYS(0)" |
Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 4 | |
| 5 | # Enable DisplayPort Hotplug with 6ms pulse |
| 6 | register "gpu_dp_d_hotplug" = "0x06" |
| 7 | |
| 8 | # Enable Panel as LVDS and configure power delays |
Angel Pons | dc0c081 | 2020-09-02 19:17:30 +0200 | [diff] [blame] | 9 | register "gpu_panel_port_select" = "PANEL_PORT_LVDS" |
Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 10 | register "gpu_panel_power_cycle_delay" = "5" # T4: 400ms |
| 11 | register "gpu_panel_power_up_delay" = "400" # T1+T2: 40ms |
| 12 | register "gpu_panel_power_down_delay" = "150" # T3: 15ms |
| 13 | register "gpu_panel_power_backlight_on_delay" = "2100" # T5: 210ms |
| 14 | register "gpu_panel_power_backlight_off_delay" = "2100" # TD: 210ms |
| 15 | |
Vladimir Serbinenko | 93fc606 | 2016-01-31 13:21:04 +0100 | [diff] [blame] | 16 | # For native gfx |
Vladimir Serbinenko | 93fc606 | 2016-01-31 13:21:04 +0100 | [diff] [blame] | 17 | register "gpu_cpu_backlight" = "0x1155" |
| 18 | register "gpu_pch_backlight" = "0x06100610" |
| 19 | |
Vladimir Serbinenko | f004b6b | 2016-02-10 02:42:16 +0100 | [diff] [blame] | 20 | register "max_mem_clock_mhz" = "666" |
| 21 | |
Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 22 | device cpu_cluster 0 on |
Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 23 | chip cpu/intel/model_206ax |
| 24 | # Magic APIC ID to locate this chip |
Angel Pons | c56c723 | 2021-05-17 11:03:55 +0200 | [diff] [blame] | 25 | device lapic 0 on end |
Arthur Heymans | b3f2323 | 2019-01-21 17:48:55 +0100 | [diff] [blame] | 26 | device lapic 0xacac off end |
Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 27 | |
Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 28 | register "tcc_offset" = "5" # TCC of 95C |
| 29 | |
Angel Pons | 6f56a23 | 2021-01-04 17:02:23 +0100 | [diff] [blame] | 30 | register "acpi_c1" = "1" # ACPI(C1) = MWAIT(C1) |
| 31 | register "acpi_c2" = "3" # ACPI(C2) = MWAIT(C3) |
| 32 | register "acpi_c3" = "5" # ACPI(C3) = MWAIT(C7) |
Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 33 | end |
| 34 | end |
| 35 | |
| 36 | device domain 0 on |
| 37 | subsystemid 0x1ae0 0xc000 inherit |
| 38 | device pci 00.0 on end # host bridge |
| 39 | device pci 02.0 on end # vga controller |
| 40 | |
| 41 | chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH |
Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 42 | # GPI routing |
| 43 | # 0 No effect (default) |
| 44 | # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set) |
| 45 | # 2 SCI (if corresponding GPIO_EN bit is also set) |
| 46 | register "alt_gp_smi_en" = "0x0002" |
| 47 | register "gpi1_routing" = "1" |
| 48 | register "gpi6_routing" = "2" |
| 49 | |
Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 50 | register "sata_port_map" = "0x3" |
Shawn Nematbakhsh | 7b8952c | 2013-03-14 11:03:59 -0700 | [diff] [blame] | 51 | # Set max SATA speed to 3.0 Gb/s |
| 52 | register "sata_interface_speed_support" = "0x2" |
Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 53 | |
| 54 | # Enable EC Port 0x68/0x6C |
| 55 | register "gen1_dec" = "0x00040069" |
| 56 | |
| 57 | # EC range is 0x800-0x9ff |
| 58 | register "gen2_dec" = "0x00fc0901" |
| 59 | |
| 60 | # EC range is 0x1610-0x161F |
| 61 | register "gen3_dec" = "0x0001C1611" |
| 62 | |
| 63 | # Enable zero-based linear PCIe root port functions |
| 64 | register "pcie_port_coalesce" = "1" |
| 65 | |
Vladimir Serbinenko | 5b044ae | 2014-10-25 15:20:55 +0200 | [diff] [blame] | 66 | register "c2_latency" = "1" |
Vladimir Serbinenko | 5b044ae | 2014-10-25 15:20:55 +0200 | [diff] [blame] | 67 | |
Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 68 | device pci 14.0 on end # USB 3.0 Controller |
| 69 | device pci 16.0 on end # Management Engine Interface 1 |
| 70 | device pci 16.1 off end # Management Engine Interface 2 |
| 71 | device pci 16.2 off end # Management Engine IDE-R |
| 72 | device pci 16.3 off end # Management Engine KT |
| 73 | device pci 19.0 off end # Intel Gigabit Ethernet |
| 74 | device pci 1a.0 on end # USB2 EHCI #2 (AUO4, BlueTooth) |
| 75 | device pci 1b.0 on end # High Definition Audio |
| 76 | device pci 1c.0 on end # PCIe Port #1 |
| 77 | device pci 1c.1 on end # PCIe Port #2 (WLAN) |
| 78 | device pci 1c.2 on end # PCIe Port #3 (Card Reader) |
| 79 | register "pcie_aspm_f2" = "0x3" |
| 80 | device pci 1c.3 off end # PCIe Port #4 |
| 81 | device pci 1c.4 off end # PCIe Port #5 |
| 82 | device pci 1c.5 on end # PCIe Port #6 (LAN) |
| 83 | device pci 1c.6 off end # PCIe Port #7 |
| 84 | device pci 1c.7 off end # PCIe Port #8 |
| 85 | device pci 1d.0 on end # USB2 EHCI #1 (Camera, WLAN, WWAN) |
| 86 | device pci 1e.0 off end # PCI bridge |
| 87 | device pci 1f.0 on |
Matt DeVillier | 3044af7 | 2018-08-01 13:05:14 -0500 | [diff] [blame] | 88 | chip drivers/pc80/tpm |
| 89 | device pnp 0c31.0 on end |
| 90 | end |
Stefan Reinauer | b7ecf6d | 2013-03-13 17:13:32 -0700 | [diff] [blame] | 91 | chip ec/quanta/it8518 |
| 92 | # 60h/64h KBC |
| 93 | device pnp ff.1 on # dummy address |
| 94 | end |
| 95 | end |
| 96 | end # LPC bridge |
| 97 | device pci 1f.2 on end # SATA Controller 1 (HDD/SSD) |
| 98 | device pci 1f.3 on end # SMBus Controller |
| 99 | device pci 1f.5 off end # SATA Controller 2 (MSATA) |
| 100 | device pci 1f.6 off end # Thermal |
| 101 | end |
| 102 | end |
| 103 | end |