| # SPDX-License-Identifier: GPL-2.0-only |
| |
| chip soc/intel/skylake |
| register "gpu_pp_up_delay_ms" = "200" # T3 |
| register "gpu_pp_down_delay_ms" = " 0" # T10 |
| register "gpu_pp_cycle_delay_ms" = "500" # T12 |
| register "gpu_pp_backlight_on_delay_ms" = " 50" # T7 |
| register "gpu_pp_backlight_off_delay_ms" = " 0" # T9 |
| |
| register "gpu_pch_backlight_pwm_hz" = "200" |
| |
| # IGD Displays |
| register "gfx" = "GMA_STATIC_DISPLAYS(0)" |
| |
| # FSP Configuration |
| register "SkipExtGfxScan" = "1" |
| register "SaGv" = "SaGv_Enabled" |
| register "eist_enable" = "1" |
| |
| register "PmConfigSlpS3MinAssert" = "2" # 50ms |
| register "PmConfigSlpS4MinAssert" = "1" # 1s |
| register "PmConfigSlpSusMinAssert" = "3" # 500ms |
| register "PmConfigSlpAMinAssert" = "3" # 2s |
| |
| # Send an extra VR mailbox command for the PS4 exit issue |
| register "SendVrMbxCmd" = "2" |
| |
| register "power_limits_config" = "{ |
| .tdp_pl1_override = 20, |
| .tdp_pl2_override = 30, |
| }" |
| |
| register "common_soc_config" = "{ |
| .chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT, |
| }" |
| |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexUart2] = PchSerialIoSkipInit, // LPSS UART |
| }" |
| |
| device cpu_cluster 0 on |
| device lapic 0 on end |
| end |
| device domain 0 on |
| subsystemid 0x1558 0x1313 inherit |
| device pci 00.0 on end # Host Bridge |
| device pci 02.0 on end # Integrated Graphics Device |
| device pci 04.0 on end # SA thermal subsystem |
| device pci 05.0 off end # Imaging Unit |
| device pci 08.0 on end # Gaussian Mixture Model |
| device pci 13.0 off end # Sensor Hub |
| device pci 14.0 on # USB xHCI |
| register "SsicPortEnable" = "0" |
| # USB2 |
| register "usb2_ports[0]" = "USB2_PORT_MID(OC_SKIP)" # Type-A, right |
| register "usb2_ports[1]" = "USB2_PORT_FLEX(OC_SKIP)" # 3G / LTE |
| register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C, right |
| register "usb2_ports[3]" = "USB2_PORT_FLEX(OC_SKIP)" # Camera |
| register "usb2_ports[4]" = "USB2_PORT_FLEX(OC_SKIP)" # Bluetooth |
| register "usb2_ports[6]" = "USB2_PORT_FLEX(OC_SKIP)" # Type-A, left |
| register "usb2_ports[7]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C, right |
| # USB3 |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A, right |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # 4G |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type C, right |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A, left |
| end |
| device pci 14.1 off end # USB xDCI (OTG) |
| device pci 14.2 on end # Thermal Subsystem |
| device pci 14.3 off end # Camera |
| device pci 15.0 off end # I2C0 |
| device pci 15.1 off end # I2C1 |
| device pci 15.2 off end # I2C2 |
| device pci 15.3 off end # I2C3 |
| device pci 16.0 on # Management Engine Interface 1 |
| register "HeciEnabled" = "1" |
| end |
| device pci 16.1 off end # Management Engine Interface 2 |
| device pci 16.2 off end # Management Engine IDE-R |
| device pci 16.3 off end # Management Engine KT Redirection |
| device pci 16.4 off end # Management Engine Interface 3 |
| device pci 17.0 on # SATA |
| register "SataMode" = "KBLFSP_SATA_MODE_AHCI" |
| register "SataSalpSupport" = "0" |
| # Ports |
| register "SataPortsEnable[0]" = "1" |
| register "SataPortsEnable[2]" = "1" |
| register "SataPortsDevSlp[2]" = "1" |
| end |
| device pci 19.0 on end # UART 2 |
| device pci 19.1 off end # I2C5 |
| device pci 19.2 off end # I2C4 |
| device pci 1c.0 on # PCI Express Port 1 |
| device pci 00.0 on end # x4 TBT |
| register "PcieRpEnable[0]" = "1" |
| register "PcieRpClkReqSupport[0]" = "1" |
| register "PcieRpClkReqNumber[0]" = "4" |
| register "PcieRpClkSrcNumber[0]" = "4" |
| register "PcieRpHotPlug[0]" = "1" |
| register "PcieRpLtrEnable[0]" = "1" |
| smbios_slot_desc "SlotTypePciExpressGen3X4" "SlotLengthOther" "Thunderbolt/Type-C" "SlotDataBusWidth4X" |
| end |
| device pci 1c.1 off end # PCI Express Port 2 |
| device pci 1c.2 off end # PCI Express Port 3 |
| device pci 1c.3 off end # PCI Express Port 4 |
| device pci 1c.4 on # PCI Express Port 5 |
| device pci 00.0 on end # x1 LAN |
| register "PcieRpEnable[4]" = "1" |
| register "PcieRpClkReqSupport[4]" = "1" |
| register "PcieRpClkReqNumber[4]" = "3" |
| register "PcieRpClkSrcNumber[4]" = "3" |
| register "PcieRpLtrEnable[4]" = "1" |
| end |
| device pci 1c.5 on # PCI Express Port 6 |
| device pci 00.0 on end # x1 WLAN |
| register "PcieRpEnable[5]" = "1" |
| register "PcieRpClkReqSupport[5]" = "1" |
| register "PcieRpClkReqNumber[5]" = "2" |
| register "PcieRpClkSrcNumber[5]" = "2" |
| register "PcieRpLtrEnable[5]" = "1" |
| smbios_slot_desc "SlotTypeM2Socket1_SD" "SlotLengthOther" "M.2/A/E 2230 (J_WLAN1)" "SlotDataBusWidth1X" |
| end |
| device pci 1c.6 off end # PCI Express Port 7 |
| device pci 1c.7 off end # PCI Express Port 8 |
| device pci 1d.0 on # PCI Express Port 9 |
| device pci 00.0 on end # x4 M.2/M (J_SSD1) |
| register "PcieRpEnable[8]" = "1" |
| register "PcieRpClkReqSupport[8]" = "1" |
| register "PcieRpClkReqNumber[8]" = "5" |
| register "PcieRpClkSrcNumber[8]" = "5" |
| register "PcieRpLtrEnable[8]" = "1" |
| smbios_slot_desc "SlotTypeM2Socket3" "SlotLengthOther" "M.2/M 2280 (J_SSD1)" "SlotDataBusWidth4X" |
| end |
| device pci 1d.1 off end # PCI Express Port 10 |
| device pci 1d.2 off end # PCI Express Port 11 |
| device pci 1d.3 off end # PCI Express Port 12 |
| device pci 1e.0 off end # UART 0 |
| device pci 1e.1 off end # UART 1 |
| device pci 1e.2 off end # GSPI 0 |
| device pci 1e.3 off end # GSPI 1 |
| device pci 1e.4 off end # eMMC |
| device pci 1e.5 off end # SDIO |
| device pci 1e.6 off end # SDXC |
| device pci 1f.0 on # LPC Interface |
| register "gen1_dec" = "0x000c0681" |
| register "gen2_dec" = "0x000c1641" |
| register "gen3_dec" = "0x000c0081" |
| register "gen4_dec" = "0x00040069" |
| register "serirq_mode" = "SERIRQ_CONTINUOUS" |
| chip drivers/pc80/tpm |
| device pnp 0c31.0 on end |
| end |
| end |
| device pci 1f.1 hidden end # P2SB |
| device pci 1f.2 on # Power Management Controller |
| register "gpe0_dw0" = "GPP_C" |
| register "gpe0_dw1" = "GPP_D" |
| register "gpe0_dw2" = "GPP_E" |
| end |
| device pci 1f.3 on end # Intel HDA |
| device pci 1f.4 on end # SMBus |
| device pci 1f.5 on end # PCH SPI |
| device pci 1f.6 off end # GbE |
| device pci 1f.7 off end # Trace Hub |
| end |
| end |