| /** @file |
| |
| Copyright (c) 2023, Intel Corporation. All rights reserved.<BR> |
| |
| Redistribution and use in source and binary forms, with or without modification, |
| are permitted provided that the following conditions are met: |
| |
| * Redistributions of source code must retain the above copyright notice, this |
| list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above copyright notice, this |
| list of conditions and the following disclaimer in the documentation and/or |
| other materials provided with the distribution. |
| * Neither the name of Intel Corporation nor the names of its contributors may |
| be used to endorse or promote products derived from this software without |
| specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| THE POSSIBILITY OF SUCH DAMAGE. |
| |
| This file is automatically generated. Please do NOT modify !!! |
| |
| **/ |
| |
| #ifndef __FSPMUPD_H__ |
| #define __FSPMUPD_H__ |
| |
| #include <FspUpd.h> |
| |
| #pragma pack(1) |
| |
| |
| #include <MemInfoHob.h> |
| |
| /// |
| /// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC. |
| /// |
| typedef struct { |
| UINT8 Revision; ///< Chipset Init Info Revision |
| UINT8 Rsvd[3]; ///< Reserved |
| UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table |
| UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table |
| } CHIPSET_INIT_INFO; |
| |
| |
| /** Fsp M Configuration |
| **/ |
| typedef struct { |
| |
| /** Offset 0x0040 - Platform Reserved Memory Size |
| The minimum platform memory size required to pass control into DXE |
| **/ |
| UINT64 PlatformMemorySize; |
| |
| /** Offset 0x0048 - SPD Data Length |
| Length of SPD Data |
| 0x100:256 Bytes, 0x200:512 Bytes, 0x400:1024 Bytes |
| **/ |
| UINT16 MemorySpdDataLen; |
| |
| /** Offset 0x004A - Enable above 4GB MMIO resource support |
| Enable/disable above 4GB MMIO resource support |
| $EN_DIS |
| **/ |
| UINT8 EnableAbove4GBMmio; |
| |
| /** Offset 0x004B - Enable/Disable CrashLog Device 10 |
| Enable(Default): Enable CPU CrashLog Device 10, Disable: Disable CPU CrashLog |
| $EN_DIS |
| **/ |
| UINT8 CpuCrashLogDevice; |
| |
| /** Offset 0x004C - Memory SPD Pointer Controller 0 Channel 0 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr000; |
| |
| /** Offset 0x0050 - Memory SPD Pointer Controller 0 Channel 0 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr001; |
| |
| /** Offset 0x0054 - Memory SPD Pointer Controller 0 Channel 1 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr010; |
| |
| /** Offset 0x0058 - Memory SPD Pointer Controller 0 Channel 1 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr011; |
| |
| /** Offset 0x005C - Memory SPD Pointer Controller 0 Channel 2 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr020; |
| |
| /** Offset 0x0060 - Memory SPD Pointer Controller 0 Channel 2 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr021; |
| |
| /** Offset 0x0064 - Memory SPD Pointer Controller 0 Channel 3 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr030; |
| |
| /** Offset 0x0068 - Memory SPD Pointer Controller 0 Channel 3 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr031; |
| |
| /** Offset 0x006C - Memory SPD Pointer Controller 1 Channel 0 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr100; |
| |
| /** Offset 0x0070 - Memory SPD Pointer Controller 1 Channel 0 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr101; |
| |
| /** Offset 0x0074 - Memory SPD Pointer Controller 1 Channel 1 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr110; |
| |
| /** Offset 0x0078 - Memory SPD Pointer Controller 1 Channel 1 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr111; |
| |
| /** Offset 0x007C - Memory SPD Pointer Controller 1 Channel 2 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr120; |
| |
| /** Offset 0x0080 - Memory SPD Pointer Controller 1 Channel 2 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr121; |
| |
| /** Offset 0x0084 - Memory SPD Pointer Controller 1 Channel 3 Dimm 0 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr130; |
| |
| /** Offset 0x0088 - Memory SPD Pointer Controller 1 Channel 3 Dimm 1 |
| Pointer to SPD data, will be used only when SpdAddressTable SPD Address are marked as 00 |
| **/ |
| UINT32 MemorySpdPtr131; |
| |
| /** Offset 0x008C - RcompResistor settings |
| Indicates RcompResistor settings: Board-dependent |
| **/ |
| UINT16 RcompResistor; |
| |
| /** Offset 0x008E - RcompTarget settings |
| RcompTarget settings: board-dependent |
| **/ |
| UINT16 RcompTarget[5]; |
| |
| /** Offset 0x0098 - Dqs Map CPU to DRAM MC 0 CH 0 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc0Ch0[2]; |
| |
| /** Offset 0x009A - Dqs Map CPU to DRAM MC 0 CH 1 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc0Ch1[2]; |
| |
| /** Offset 0x009C - Dqs Map CPU to DRAM MC 0 CH 2 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc0Ch2[2]; |
| |
| /** Offset 0x009E - Dqs Map CPU to DRAM MC 0 CH 3 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc0Ch3[2]; |
| |
| /** Offset 0x00A0 - Dqs Map CPU to DRAM MC 1 CH 0 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 0: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc1Ch0[2]; |
| |
| /** Offset 0x00A2 - Dqs Map CPU to DRAM MC 1 CH 1 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 1: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc1Ch1[2]; |
| |
| /** Offset 0x00A4 - Dqs Map CPU to DRAM MC 1 CH 2 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 2: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc1Ch2[2]; |
| |
| /** Offset 0x00A6 - Dqs Map CPU to DRAM MC 1 CH 3 |
| Set Dqs mapping relationship between CPU and DRAM, Channel 3: board-dependent |
| **/ |
| UINT8 DqsMapCpu2DramMc1Ch3[2]; |
| |
| /** Offset 0x00A8 - Dq Map CPU to DRAM MC 0 CH 0 |
| Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc0Ch0[16]; |
| |
| /** Offset 0x00B8 - Dq Map CPU to DRAM MC 0 CH 1 |
| Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc0Ch1[16]; |
| |
| /** Offset 0x00C8 - Dq Map CPU to DRAM MC 0 CH 2 |
| Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependet |
| **/ |
| UINT8 DqMapCpu2DramMc0Ch2[16]; |
| |
| /** Offset 0x00D8 - Dq Map CPU to DRAM MC 0 CH 3 |
| Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc0Ch3[16]; |
| |
| /** Offset 0x00E8 - Dq Map CPU to DRAM MC 1 CH 0 |
| Set Dq mapping relationship between CPU and DRAM, Channel 0: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc1Ch0[16]; |
| |
| /** Offset 0x00F8 - Dq Map CPU to DRAM MC 1 CH 1 |
| Set Dq mapping relationship between CPU and DRAM, Channel 1: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc1Ch1[16]; |
| |
| /** Offset 0x0108 - Dq Map CPU to DRAM MC 1 CH 2 |
| Set Dq mapping relationship between CPU and DRAM, Channel 2: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc1Ch2[16]; |
| |
| /** Offset 0x0118 - Dq Map CPU to DRAM MC 1 CH 3 |
| Set Dq mapping relationship between CPU and DRAM, Channel 3: board-dependent |
| **/ |
| UINT8 DqMapCpu2DramMc1Ch3[16]; |
| |
| /** Offset 0x0128 - Dqs Pins Interleaved Setting |
| Indicates DqPinsInterleaved setting: board-dependent |
| $EN_DIS |
| **/ |
| UINT8 DqPinsInterleaved; |
| |
| /** Offset 0x0129 - Smram Mask |
| The SMM Regions AB-SEG and/or H-SEG reserved |
| 0: Neither, 1:AB-SEG, 2:H-SEG, 3: Both |
| **/ |
| UINT8 SmramMask; |
| |
| /** Offset 0x012A - Ibecc |
| Enable/Disable Ibecc |
| $EN_DIS |
| **/ |
| UINT8 Ibecc; |
| |
| /** Offset 0x012B - IbeccOperationMode |
| In-Band ECC Operation Mode |
| 0:Protect base on address range, 1:Non-protected, 2:All protected |
| **/ |
| UINT8 IbeccOperationMode; |
| |
| /** Offset 0x012C - IbeccProtectedRangeEnable |
| In-Band ECC Protected Region Enable |
| $EN_DIS |
| **/ |
| UINT8 IbeccProtectedRangeEnable[8]; |
| |
| /** Offset 0x0134 - IbeccProtectedRangeBase |
| IBECC Protected Region Base |
| **/ |
| UINT32 IbeccProtectedRangeBase[8]; |
| |
| /** Offset 0x0154 - IbeccProtectedRangeMask |
| IBECC Protected Region Mask |
| **/ |
| UINT32 IbeccProtectedRangeMask[8]; |
| |
| /** Offset 0x0174 - MRC Fast Boot |
| Enables/Disable the MRC fast path thru the MRC |
| $EN_DIS |
| **/ |
| UINT8 MrcFastBoot; |
| |
| /** Offset 0x0175 - Rank Margin Tool per Task |
| This option enables the user to execute Rank Margin Tool per major training step |
| in the MRC. |
| $EN_DIS |
| **/ |
| UINT8 RmtPerTask; |
| |
| /** Offset 0x0176 - Training Trace |
| This option enables the trained state tracing feature in MRC. This feature will |
| print out the key training parameters state across major training steps. |
| $EN_DIS |
| **/ |
| UINT8 TrainTrace; |
| |
| /** Offset 0x0177 - Reserved |
| **/ |
| UINT8 Reserved0; |
| |
| /** Offset 0x0178 - Tseg Size |
| Size of SMRAM memory reserved. 0x400000 for Release build and 0x1000000 for Debug build |
| 0x0400000:4MB, 0x01000000:16MB |
| **/ |
| UINT32 TsegSize; |
| |
| /** Offset 0x017C - MMIO Size |
| Size of MMIO space reserved for devices. 0(Default)=Auto, non-Zero=size in MB |
| **/ |
| UINT16 MmioSize; |
| |
| /** Offset 0x017E - Probeless Trace |
| Probeless Trace: 0=Disabled, 1=Enable. Enabling Probeless Trace will reserve 128MB. |
| This also requires IED to be enabled. |
| $EN_DIS |
| **/ |
| UINT8 ProbelessTrace; |
| |
| /** Offset 0x017F - Enable SMBus |
| Enable/disable SMBus controller. |
| $EN_DIS |
| **/ |
| UINT8 SmbusEnable; |
| |
| /** Offset 0x0180 - Spd Address Tabl |
| Specify SPD Address table for CH0D0/CH0D1/CH1D0&CH1D1. MemorySpdPtr will be used |
| if SPD Address is 00 |
| **/ |
| UINT8 SpdAddressTable[16]; |
| |
| /** Offset 0x0190 - Platform Debug Consent |
| Enabled(All Probes+TraceHub) supports all probes with TraceHub enabled and blocks |
| s0ix\n |
| \n |
| Enabled(Low Power) does not support DCI OOB 4-wire and Tracehub is powergated by |
| default, s0ix is viable\n |
| \n |
| Manual:user needs to configure Advanced Debug Settings manually, aimed at advanced users |
| 0:Disabled, 2:Enabled (All Probes+TraceHub), 6:Enable (Low Power), 7:Manual |
| **/ |
| UINT8 PlatformDebugConsent; |
| |
| /** Offset 0x0191 - DCI Enable |
| Determine if to enable DCI debug from host |
| $EN_DIS |
| **/ |
| UINT8 DciEn; |
| |
| /** Offset 0x0192 - DCI DbC Mode |
| Disabled: Clear both USB2/3DBCEN; USB2: set USB2DBCEN; USB3: set USB3DBCEN; Both: |
| Set both USB2/3DBCEN; No Change: Comply with HW value |
| 0:Disabled, 1:USB2 DbC, 2:USB3 DbC, 3:Both, 4:No Change |
| **/ |
| UINT8 DciDbcMode; |
| |
| /** Offset 0x0193 - Enable DCI ModPHY Power Gate |
| DEPRECATED |
| $EN_DIS |
| **/ |
| UINT8 DciModphyPg; |
| |
| /** Offset 0x0194 - USB3 Type-C UFP2DFP Kernel/Platform Debug Support |
| This BIOS option enables kernel and platform debug for USB3 interface over a UFP |
| Type-C receptacle, select 'No Change' will do nothing to UFP2DFP setting. |
| 0:Disabled, 1:Enabled, 2:No Change |
| **/ |
| UINT8 DciUsb3TypecUfpDbg; |
| |
| /** Offset 0x0195 - PCH Trace Hub Mode |
| Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' |
| if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. |
| 0: Disable, 1: Target Debugger Mode, 2: Host Debugger Mode |
| **/ |
| UINT8 PchTraceHubMode; |
| |
| /** Offset 0x0196 - PCH Trace Hub Memory Region 0 buffer Size |
| Specify size of Pch trace memory region 0 buffer, the size can be 0, 1MB, 8MB, 64MB, |
| 128MB, 256MB, 512MB |
| 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB |
| **/ |
| UINT8 PchTraceHubMemReg0Size; |
| |
| /** Offset 0x0197 - PCH Trace Hub Memory Region 1 buffer Size |
| Specify size of Pch trace memory region 1 buffer, the size can be 0, 1MB, 8MB, 64MB, |
| 128MB, 256MB, 512MB |
| 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB |
| **/ |
| UINT8 PchTraceHubMemReg1Size; |
| |
| /** Offset 0x0198 - HD Audio DMIC Link Clock Select |
| Determines DMIC<N> Clock Source. 0: Both, 1: ClkA, 2: ClkB |
| 0: Both, 1: ClkA, 2: ClkB |
| **/ |
| UINT8 PchHdaAudioLinkDmicClockSelect[2]; |
| |
| /** Offset 0x019A - Disable Tccold Handshake |
| Disable Tccold Handshake. <b>0: Do Nothing;</b> 1: Disable |
| $EN_DIS |
| **/ |
| UINT8 DisableDynamicTccoldHandshake; |
| |
| /** Offset 0x019B - Reserved |
| **/ |
| UINT8 Reserved2[4]; |
| |
| /** Offset 0x019F - State of X2APIC_OPT_OUT bit in the DMAR table |
| 0=Disable/Clear, 1=Enable/Set |
| $EN_DIS |
| **/ |
| UINT8 X2ApicOptOut; |
| |
| /** Offset 0x01A0 - State of DMA_CONTROL_GUARANTEE bit in the DMAR table |
| 0=Disable/Clear, 1=Enable/Set |
| $EN_DIS |
| **/ |
| UINT8 DmaControlGuarantee; |
| |
| /** Offset 0x01A1 - Reserved |
| **/ |
| UINT8 Reserved3[3]; |
| |
| /** Offset 0x01A4 - Base addresses for VT-d function MMIO access |
| Base addresses for VT-d MMIO access per VT-d engine |
| **/ |
| UINT32 VtdBaseAddress[9]; |
| |
| /** Offset 0x01C8 - Disable VT-d |
| 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled) |
| $EN_DIS |
| **/ |
| UINT8 VtdDisable; |
| |
| /** Offset 0x01C9 - Vtd Programming for Igd |
| 1=Enable/TRUE (Igd VT-d Bar programming enabled), 0=Disable/FLASE (Igd VT-d Bar |
| programming disabled) |
| $EN_DIS |
| **/ |
| UINT8 VtdIgdEnable; |
| |
| /** Offset 0x01CA - Vtd Programming for Ipu |
| 1=Enable/TRUE (Ipu VT-d Bar programming enabled), 0=Disable/FLASE (Ipu VT-d Bar |
| programming disabled) |
| $EN_DIS |
| **/ |
| UINT8 VtdIpuEnable; |
| |
| /** Offset 0x01CB - Vtd Programming for Iop |
| 1=Enable/TRUE (Iop VT-d Bar programming enabled), 0=Disable/FLASE (Iop VT-d Bar |
| programming disabled) |
| $EN_DIS |
| **/ |
| UINT8 VtdIopEnable; |
| |
| /** Offset 0x01CC - Vtd Programming for ITbt |
| DEPRECATED |
| $EN_DIS |
| **/ |
| UINT8 VtdItbtEnable; |
| |
| /** Offset 0x01CD - Internal Graphics Pre-allocated Memory |
| Size of memory preallocated for internal graphics. |
| 0x00:0MB, 0x01:32MB, 0x02:64MB, 0x03:96MB, 0x04:128MB, 0x05:160MB, 0xF0:4MB, 0xF1:8MB, |
| 0xF2:12MB, 0xF3:16MB, 0xF4:20MB, 0xF5:24MB, 0xF6:28MB, 0xF7:32MB, 0xF8:36MB, 0xF9:40MB, |
| 0xFA:44MB, 0xFB:48MB, 0xFC:52MB, 0xFD:56MB, 0xFE:60MB |
| **/ |
| UINT8 IgdDvmt50PreAlloc; |
| |
| /** Offset 0x01CE - Internal Graphics |
| Enable/disable internal graphics. |
| $EN_DIS |
| **/ |
| UINT8 InternalGfx; |
| |
| /** Offset 0x01CF - Aperture Size |
| Select the Aperture Size. |
| 0:128 MB, 1:256 MB, 3:512 MB, 7:1024 MB, 15: 2048 MB |
| **/ |
| UINT8 ApertureSize; |
| |
| /** Offset 0x01D0 - Board Type |
| MrcBoardType, Options are 0:Mobile, 1:Desktop1Dpc, 2:Desktop2DpcDaisyChain, 3:Desktop2DpcTeeTopologyAsymmetrical, |
| 4:Desktop2DpcTeeTopology, 5:UltMobile, 7:UP Server |
| 0:Mobile, 1:Desktop1Dpc, 2:Desktop2DpcDaisyChain, 3:Desktop2DpcTeeTopologyAsymmetrical, |
| 4:Desktop2DpcTeeTopology, 5:UltMobile, 7:UP Server |
| **/ |
| UINT8 UserBd; |
| |
| /** Offset 0x01D1 - Reserved |
| **/ |
| UINT8 Reserved4; |
| |
| /** Offset 0x01D2 - DDR Frequency Limit |
| Maximum Memory Frequency Selections in Mhz. Options are 1067, 1333, 1600, 1867, |
| 2133, 2400, 2667, 2933 and 0 for Auto. |
| 1067:1067, 1333:1333, 1600:1600, 1867:1867, 2133:2133, 2400:2400, 2667:2667, 2933:2933, 0:Auto |
| **/ |
| UINT16 DdrFreqLimit; |
| |
| /** Offset 0x01D4 - SA GV |
| System Agent dynamic frequency support and when enabled memory will be training |
| at four different frequencies. |
| 0:Disabled, 1:FixedPoint0, 2:FixedPoint1, 3:FixedPoint2, 4:FixedPoint3, 5:Enabled |
| **/ |
| UINT8 SaGv; |
| |
| /** Offset 0x01D5 - Memory Test on Warm Boot |
| Run Base Memory Test on Warm Boot |
| 0:Disable, 1:Enable |
| **/ |
| UINT8 MemTestOnWarmBoot; |
| |
| /** Offset 0x01D6 - DDR Speed Control |
| DDR Frequency and Gear control for all SAGV points. |
| 0:Auto, 1:Manual |
| **/ |
| UINT8 DdrSpeedControl; |
| |
| /** Offset 0x01D7 - Rank Margin Tool |
| Enable/disable Rank Margin Tool. |
| $EN_DIS |
| **/ |
| UINT8 RMT; |
| |
| /** Offset 0x01D8 - Controller 0 Channel 0 DIMM Control |
| Enable / Disable DIMMs on Controller 0 Channel 0 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc0Ch0; |
| |
| /** Offset 0x01D9 - Controller 0 Channel 1 DIMM Control |
| Enable / Disable DIMMs on Controller 0 Channel 1 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc0Ch1; |
| |
| /** Offset 0x01DA - Controller 0 Channel 2 DIMM Control |
| Enable / Disable DIMMs on Controller 0 Channel 2 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc0Ch2; |
| |
| /** Offset 0x01DB - Controller 0 Channel 3 DIMM Control |
| Enable / Disable DIMMs on Controller 0 Channel 3 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc0Ch3; |
| |
| /** Offset 0x01DC - Controller 1 Channel 0 DIMM Control |
| Enable / Disable DIMMs on Controller 1 Channel 0 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc1Ch0; |
| |
| /** Offset 0x01DD - Controller 1 Channel 1 DIMM Control |
| Enable / Disable DIMMs on Controller 1 Channel 1 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc1Ch1; |
| |
| /** Offset 0x01DE - Controller 1 Channel 2 DIMM Control |
| Enable / Disable DIMMs on Controller 1 Channel 2 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc1Ch2; |
| |
| /** Offset 0x01DF - Controller 1 Channel 3 DIMM Control |
| Enable / Disable DIMMs on Controller 1 Channel 3 |
| $EN_DIS |
| **/ |
| UINT8 DisableMc1Ch3; |
| |
| /** Offset 0x01E0 - Scrambler Support |
| This option enables data scrambling in memory. |
| $EN_DIS |
| **/ |
| UINT8 ScramblerSupport; |
| |
| /** Offset 0x01E1 - SPD Profile Selected |
| Select DIMM timing profile. Options are 0:Default SPD Profile, 1:Custom Profile, |
| 2:XMP Profile 1, 3:XMP Profile 2, 4:XMP Profile 3, 5:XMP User Profile 4, 6:XMP |
| User Profile 5 |
| 0:Default SPD Profile, 1:Custom Profile, 2:XMP Profile 1, 3:XMP Profile 2, 4:XMP |
| Profile 3, 5:XMP User Profile 4, 6:XMP User Profile 5 |
| **/ |
| UINT8 SpdProfileSelected; |
| |
| /** Offset 0x01E2 - Memory Reference Clock |
| 100MHz, 133MHz. |
| 0:133MHz, 1:100MHz |
| **/ |
| UINT8 RefClk; |
| |
| /** Offset 0x01E3 - Reserved |
| **/ |
| UINT8 Reserved5; |
| |
| /** Offset 0x01E4 - Memory Voltage |
| DRAM voltage (Vdd) (supply voltage for input buffers and core logic of the DRAM |
| chips) in millivolts from 0 - default to 1435mv. |
| **/ |
| UINT16 VddVoltage; |
| |
| /** Offset 0x01E6 - Memory Ratio |
| Automatic or the frequency will equal ratio times reference clock. Set to Auto to |
| recalculate memory timings listed below. |
| 0:Auto, 4:4, 5:5, 6:6, 7:7, 8:8, 9:9, 10:10, 11:11, 12:12, 13:13, 14:14, 15:15 |
| **/ |
| UINT8 Ratio; |
| |
| /** Offset 0x01E7 - tCL |
| CAS Latency, 0: AUTO, max: 31. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT8 tCL; |
| |
| /** Offset 0x01E8 - tCWL |
| Min CAS Write Latency Delay Time, 0: AUTO, max: 34. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT8 tCWL; |
| |
| /** Offset 0x01E9 - Reserved |
| **/ |
| UINT8 Reserved6; |
| |
| /** Offset 0x01EA - tFAW |
| Min Four Activate Window Delay Time, 0: AUTO, max: 63. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT16 tFAW; |
| |
| /** Offset 0x01EC - tRAS |
| RAS Active Time, 0: AUTO, max: 64. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT16 tRAS; |
| |
| /** Offset 0x01EE - tRCD/tRP |
| RAS to CAS delay time and Row Precharge delay time, 0: AUTO, max: 63. Only used |
| if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). |
| **/ |
| UINT8 tRCDtRP; |
| |
| /** Offset 0x01EF - Reserved |
| **/ |
| UINT8 Reserved7; |
| |
| /** Offset 0x01F0 - tREFI |
| Refresh Interval, 0: AUTO, max: 65535. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT16 tREFI; |
| |
| /** Offset 0x01F2 - tRFC |
| Min Refresh Recovery Delay Time, 0: AUTO, max: 1023. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT16 tRFC; |
| |
| /** Offset 0x01F4 - tRRD |
| Min Row Active to Row Active Delay Time, 0: AUTO, max: 15. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT8 tRRD; |
| |
| /** Offset 0x01F5 - tRTP |
| Min Internal Read to Precharge Command Delay Time, 0: AUTO, max: 15. DDR4 legal |
| values: 5, 6, 7, 8, 9, 10, 12. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT8 tRTP; |
| |
| /** Offset 0x01F6 - tWR |
| Min Write Recovery Time, 0: AUTO, legal values: 5, 6, 7, 8, 10, 12, 14, 16, 18, |
| 20, 24, 30, 34, 40. Only used if FspmUpd->FspmConfig.SpdProfileSelected == 1 (Custom Profile). |
| 0:Auto, 5:5, 6:6, 7:7, 8:8, 10:10, 12:12, 14:14, 16:16, 18:18, 20:20, 24:24, 30:30, |
| 34:34, 40:40 |
| **/ |
| UINT8 tWR; |
| |
| /** Offset 0x01F7 - tWTR |
| Min Internal Write to Read Command Delay Time, 0: AUTO, max: 28. Only used if FspmUpd->FspmConfig.SpdProfileSelected |
| == 1 (Custom Profile). |
| **/ |
| UINT8 tWTR; |
| |
| /** Offset 0x01F8 - NMode |
| System command rate, range 0-2, 0 means auto, 1 = 1N, 2 = 2N |
| **/ |
| UINT8 NModeSupport; |
| |
| /** Offset 0x01F9 - Enable Intel HD Audio (Azalia) |
| 0: Disable, 1: Enable (Default) Azalia controller |
| $EN_DIS |
| **/ |
| UINT8 PchHdaEnable; |
| |
| /** Offset 0x01FA - Enable PCH ISH Controller |
| 0: Disable, 1: Enable (Default) ISH Controller |
| $EN_DIS |
| **/ |
| UINT8 PchIshEnable; |
| |
| /** Offset 0x01FB - CPU Trace Hub Mode |
| Select 'Host Debugger' if Trace Hub is used with host debugger tool or 'Target Debugger' |
| if Trace Hub is used by target debugger software or 'Disable' trace hub functionality. |
| 0: Disable, 1:Target Debugger Mode, 2:Host Debugger Mode |
| **/ |
| UINT8 CpuTraceHubMode; |
| |
| /** Offset 0x01FC - CPU Trace Hub Memory Region 0 |
| CPU Trace Hub Memory Region 0, The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, |
| 128MB, 256MB, 512MB |
| 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB |
| **/ |
| UINT8 CpuTraceHubMemReg0Size; |
| |
| /** Offset 0x01FD - CPU Trace Hub Memory Region 1 |
| CPU Trace Hub Memory Region 1. The avaliable memory size is : 0MB, 1MB, 8MB, 64MB, |
| 128MB, 256MB, 512MB |
| 0:0, 1:1MB, 2:8MB, 3:64MB, 4:128MB, 5:256MB, 6:512MB |
| **/ |
| UINT8 CpuTraceHubMemReg1Size; |
| |
| /** Offset 0x01FE - SAGV Gear Ratio |
| Gear Selection for SAGV points. 0 - Auto, 1-1 Gear 1, 2-Gear 2 |
| **/ |
| UINT8 SaGvGear[4]; |
| |
| /** Offset 0x0202 - SAGV Frequency |
| SAGV Frequency per point in Mhz. 0 for Auto and a ratio of 133/100MHz: 1333/1300. |
| **/ |
| UINT16 SaGvFreq[4]; |
| |
| /** Offset 0x020A - SAGV Disabled Gear Ratio |
| Gear Selection for SAGV Disabled. 0 - Auto, 1-1 Gear 1, 2-Gear 2 |
| **/ |
| UINT8 GearRatio; |
| |
| /** Offset 0x020B - HECI Timeouts |
| 0: Disable, 1: Enable (Default) timeout check for HECI |
| $EN_DIS |
| **/ |
| UINT8 HeciTimeouts; |
| |
| /** Offset 0x020C - HECI1 BAR address |
| BAR address of HECI1 |
| **/ |
| UINT32 Heci1BarAddress; |
| |
| /** Offset 0x0210 - HECI2 BAR address |
| BAR address of HECI2 |
| **/ |
| UINT32 Heci2BarAddress; |
| |
| /** Offset 0x0214 - HECI3 BAR address |
| BAR address of HECI3 |
| **/ |
| UINT32 Heci3BarAddress; |
| |
| /** Offset 0x0218 - HG dGPU Power Delay |
| HG dGPU delay interval after power enabling: 0=Minimal, 1000=Maximum, default is |
| 300=300 microseconds |
| **/ |
| UINT16 HgDelayAfterPwrEn; |
| |
| /** Offset 0x021A - HG dGPU Reset Delay |
| HG dGPU delay interval for Reset complete: 0=Minimal, 1000=Maximum, default is 100=100 |
| microseconds |
| **/ |
| UINT16 HgDelayAfterHoldReset; |
| |
| /** Offset 0x021C - MMIO size adjustment for AUTO mode |
| Positive number means increasing MMIO size, Negative value means decreasing MMIO |
| size: 0 (Default)=no change to AUTO mode MMIO size |
| **/ |
| UINT16 MmioSizeAdjustment; |
| |
| /** Offset 0x021E - PCIe ASPM programming will happen in relation to the Oprom |
| Select when PCIe ASPM programming will happen in relation to the Oprom. Before(0x0)(Default): |
| Do PCIe ASPM programming before Oprom, After(0x1): Do PCIe ASPM programming after |
| Oprom, requires an SMI handler to save/restore ASPM settings during S3 resume |
| 0:Before, 1:After |
| **/ |
| UINT8 InitPcieAspmAfterOprom; |
| |
| /** Offset 0x021F - Selection of the primary display device |
| 0=iGFX, 1=PEG, 2=PCIe Graphics on PCH, 3(Default)=AUTO, 4=Hybrid Graphics |
| 0:iGFX, 1:PEG, 2:PCIe Graphics on PCH, 3:AUTO, 4:Hybrid Graphics |
| **/ |
| UINT8 PrimaryDisplay; |
| |
| /** Offset 0x0220 - Selection of PSMI Region size |
| 0=32MB, 1=288MB, 2=544MB, 3=800MB, 4=1024MB Default is 0 |
| 0:32MB, 1:288MB, 2:544MB, 3:800MB, 4:1024MB |
| **/ |
| UINT8 PsmiRegionSize; |
| |
| /** Offset 0x0221 - Reserved |
| **/ |
| UINT8 Reserved8; |
| |
| /** Offset 0x0222 - Reserved |
| **/ |
| UINT8 Reserved9[2]; |
| |
| /** Offset 0x0224 - Temporary MMIO address for GMADR |
| Obsolete field now and it has been extended to 64 bit address, used GmAdr64 |
| **/ |
| UINT32 GmAdr; |
| |
| /** Offset 0x0228 - Temporary MMIO address for GTTMMADR |
| The reference code will use this as Temporary MMIO address space to access GTTMMADR |
| Registers.Platform should provide conflict free Temporary MMIO Range: GttMmAdr |
| to (GttMmAdr + 2MB MMIO + 6MB Reserved + GttSize). Default is (GmAdr - (2MB MMIO |
| + 6MB Reserved + GttSize)) to (GmAdr - 0x1) (Where GttSize = 8MB) |
| **/ |
| UINT32 GttMmAdr; |
| |
| /** Offset 0x022C - Selection of iGFX GTT Memory size |
| 1=2MB, 2=4MB, 3=8MB, Default is 3 |
| 1:2MB, 2:4MB, 3:8MB |
| **/ |
| UINT16 GttSize; |
| |
| /** Offset 0x022E - Hybrid Graphics GPIO information for PEG 0 |
| Hybrid Graphics GPIO information for PEG 0, for Reset, power and wake GPIOs |
| **/ |
| UINT8 CpuPcie0Rtd3Gpio[24]; |
| |
| /** Offset 0x0246 - Enable/Disable MRC TXT dependency |
| When enabled MRC execution will wait for TXT initialization to be done first. Disabled(0x0)(Default): |
| MRC will not wait for TXT initialization, Enabled(0x1): MRC will wait for TXT initialization |
| $EN_DIS |
| **/ |
| UINT8 TxtImplemented; |
| |
| /** Offset 0x0247 - Enable/Disable SA OcSupport |
| Enable: Enable SA OcSupport, Disable(Default): Disable SA OcSupport |
| $EN_DIS |
| **/ |
| UINT8 SaOcSupport; |
| |
| /** Offset 0x0248 - GT slice Voltage Mode |
| 0(Default): Adaptive, 1: Override |
| 0: Adaptive, 1: Override |
| **/ |
| UINT8 GtVoltageMode; |
| |
| /** Offset 0x0249 - Maximum GTs turbo ratio override |
| 0(Default)=Minimal/Auto, 60=Maximum |
| **/ |
| UINT8 GtMaxOcRatio; |
| |
| /** Offset 0x024A - The voltage offset applied to GT slice |
| 0(Default)=Minimal, 1000=Maximum |
| **/ |
| UINT16 GtVoltageOffset; |
| |
| /** Offset 0x024C - The GT slice voltage override which is applied to the entire range of GT frequencies |
| 0(Default)=Minimal, 2000=Maximum |
| **/ |
| UINT16 GtVoltageOverride; |
| |
| /** Offset 0x024E - adaptive voltage applied during turbo frequencies |
| 0(Default)=Minimal, 2000=Maximum |
| **/ |
| UINT16 GtExtraTurboVoltage; |
| |
| /** Offset 0x0250 - voltage offset applied to the SA |
| 0(Default)=Minimal, 1000=Maximum |
| **/ |
| UINT16 SaVoltageOffset; |
| |
| /** Offset 0x0252 - PCIe root port Function number for Hybrid Graphics dGPU |
| Root port Index number to indicate which PCIe root port has dGPU |
| **/ |
| UINT8 RootPortIndex; |
| |
| /** Offset 0x0253 - Realtime Memory Timing |
| 0(Default): Disabled, 1: Enabled. When enabled, it will allow the system to perform |
| realtime memory timing changes after MRC_DONE. |
| 0: Disabled, 1: Enabled |
| **/ |
| UINT8 RealtimeMemoryTiming; |
| |
| /** Offset 0x0254 - iTBT PCIe Multiple Segment setting |
| DEPRECATED |
| $EN_DIS |
| **/ |
| UINT8 PcieMultipleSegmentEnabled; |
| |
| /** Offset 0x0255 - Enable/Disable SA IPU |
| Enable(Default): Enable SA IPU, Disable: Disable SA IPU |
| $EN_DIS |
| **/ |
| UINT8 SaIpuEnable; |
| |
| /** Offset 0x0256 - Lane Used of CSI port |
| Lane Used of each CSI port |
| 1:x1, 2:x2, 3:x3, 4:x4, 8:x8 |
| **/ |
| UINT8 IpuLaneUsed[8]; |
| |
| /** Offset 0x025E - Lane Used of CSI port |
| Speed of each CSI port |
| 0:Sensor default, 1:<416Mbps, 2:<1.5Gbps, 3:<2Gbps, 4:<2.5Gbps, 5:<4Gbps, 6:>4Gbps |
| **/ |
| UINT8 CsiSpeed[8]; |
| |
| /** Offset 0x0266 - IMGU CLKOUT Configuration |
| The configuration of IMGU CLKOUT, 0: Disable;<b>1: Enable</b>. |
| $EN_DIS |
| **/ |
| UINT8 ImguClkOutEn[6]; |
| |
| /** Offset 0x026C - Enable PCIE RP Mask |
| Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 |
| for port1, bit1 for port2, and so on. |
| **/ |
| UINT32 CpuPcieRpEnableMask; |
| |
| /** Offset 0x0270 - Assertion on Link Down GPIOs |
| GPIO Assertion on Link Down. Disabled(0x0)(Default): Disable assertion on Link Down |
| GPIOs, Enabled(0x1): Enable assertion on Link Down GPIOs |
| 0:Disable, 1:Enable |
| **/ |
| UINT8 CpuPcieRpLinkDownGpios; |
| |
| /** Offset 0x0271 - Enable ClockReq Messaging |
| ClockReq Messaging. Disabled(0x0): Disable ClockReq Messaging, Enabled(0x1)(Default): |
| Enable ClockReq Messaging |
| 0:Disable, 1:Enable |
| **/ |
| UINT8 CpuPcieRpClockReqMsgEnable[3]; |
| |
| /** Offset 0x0274 - PCIE RP Pcie Speed |
| Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3; |
| 4: Gen4 (see: CPU_PCIE_SPEED). |
| **/ |
| UINT8 CpuPcieRpPcieSpeed[4]; |
| |
| /** Offset 0x0278 - Selection of PSMI Support On/Off |
| 0(Default) = FALSE, 1 = TRUE. When TRUE, it will allow the PSMI Support |
| $EN_DIS |
| **/ |
| UINT8 GtPsmiSupport; |
| |
| /** Offset 0x0279 - Program GPIOs for LFP on DDI port-A device |
| 0=Disabled,1(Default)=eDP, 2=MIPI DSI |
| 0:Disabled, 1:eDP, 2:MIPI DSI |
| **/ |
| UINT8 DdiPortAConfig; |
| |
| /** Offset 0x027A - Program GPIOs for LFP on DDI port-B device |
| 0(Default)=Disabled,1=eDP, 2=MIPI DSI |
| 0:Disabled, 1:eDP, 2:MIPI DSI |
| **/ |
| UINT8 DdiPortBConfig; |
| |
| /** Offset 0x027B - Enable or disable HPD of DDI port A |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPortAHpd; |
| |
| /** Offset 0x027C - Enable or disable HPD of DDI port B |
| 0=Disable, 1(Default)=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPortBHpd; |
| |
| /** Offset 0x027D - Enable or disable HPD of DDI port C |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPortCHpd; |
| |
| /** Offset 0x027E - Enable or disable HPD of DDI port 1 |
| 0=Disable, 1(Default)=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort1Hpd; |
| |
| /** Offset 0x027F - Enable or disable HPD of DDI port 2 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort2Hpd; |
| |
| /** Offset 0x0280 - Enable or disable HPD of DDI port 3 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort3Hpd; |
| |
| /** Offset 0x0281 - Enable or disable HPD of DDI port 4 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort4Hpd; |
| |
| /** Offset 0x0282 - Enable or disable DDC of DDI port A |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPortADdc; |
| |
| /** Offset 0x0283 - Enable or disable DDC of DDI port B |
| 0=Disable, 1(Default)=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPortBDdc; |
| |
| /** Offset 0x0284 - Enable or disable DDC of DDI port C |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPortCDdc; |
| |
| /** Offset 0x0285 - Enable DDC setting of DDI Port 1 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort1Ddc; |
| |
| /** Offset 0x0286 - Enable DDC setting of DDI Port 2 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort2Ddc; |
| |
| /** Offset 0x0287 - Enable DDC setting of DDI Port 3 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort3Ddc; |
| |
| /** Offset 0x0288 - Enable DDC setting of DDI Port 4 |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 DdiPort4Ddc; |
| |
| /** Offset 0x0289 - Reserved |
| **/ |
| UINT8 Reserved10[7]; |
| |
| /** Offset 0x0290 - Temporary MMIO address for GMADR |
| The reference code will use this as Temporary MMIO address space to access GMADR |
| Registers.Platform should provide conflict free Temporary MMIO Range: GmAdr to |
| (GmAdr + ApertureSize). Default is (PciExpressBaseAddress - ApertureSize) to (PciExpressBaseAddress |
| - 0x1) (Where ApertureSize = 256MB, 512MB, 1024MB and 2048MB) |
| **/ |
| UINT64 GmAdr64; |
| |
| /** Offset 0x0298 - Per-core HT Disable |
| Defines the per-core HT disable mask where: 1 - Disable selected logical core HT, |
| 0 - is ignored. Input is in HEX and each bit maps to a logical core. Ex. A value |
| of '1F' would disable HT for cores 4,3,2,1 and 0. Default is 0, all cores have |
| HT enabled. Range is 0 - 0x7F for max 8 cores. You can only disable up to MAX_CORE_COUNT - 1. |
| **/ |
| UINT16 PerCoreHtDisable; |
| |
| /** Offset 0x029A - SA/Uncore voltage mode |
| SA/Uncore voltage mode; <b>0: Adaptive</b>; 1: Override. |
| $EN_DIS |
| **/ |
| UINT8 SaVoltageMode; |
| |
| /** Offset 0x029B - Reserved |
| **/ |
| UINT8 Reserved11; |
| |
| /** Offset 0x029C - SA/Uncore Voltage Override |
| The SA/Uncore voltage override applicable when SA/Uncore voltage mode is in Override |
| mode. Valid Range 0 to 2000 |
| **/ |
| UINT16 SaVoltageOverride; |
| |
| /** Offset 0x029E - SA/Uncore Extra Turbo voltage |
| Extra Turbo voltage applicable when SA/Uncore voltage mode is in Adaptive mode. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 SaExtraTurboVoltage; |
| |
| /** Offset 0x02A0 - Thermal Velocity Boost Ratio clipping |
| 0(Default): Disabled, 1: Enabled. This service controls Core frequency reduction |
| caused by high package temperatures for processors that implement the Intel Thermal |
| Velocity Boost (TVB) feature |
| 0: Disabled, 1: Enabled |
| **/ |
| UINT8 TvbRatioClipping; |
| |
| /** Offset 0x02A1 - Thermal Velocity Boost voltage optimization |
| 0: Disabled, 1: Enabled(Default). This service controls thermal based voltage optimizations |
| for processors that implement the Intel Thermal Velocity Boost (TVB) feature. |
| 0: Disabled, 1: Enabled |
| **/ |
| UINT8 TvbVoltageOptimization; |
| |
| /** Offset 0x02A2 - Reserved |
| **/ |
| UINT8 Reserved12; |
| |
| /** Offset 0x02A3 - Reserved |
| **/ |
| UINT8 Reserved13; |
| |
| /** Offset 0x02A4 - Reserved |
| **/ |
| UINT16 Reserved14; |
| |
| /** Offset 0x02A6 - Reserved |
| **/ |
| UINT16 Reserved15; |
| |
| /** Offset 0x02A8 - Reserved |
| **/ |
| UINT8 Reserved16[4]; |
| |
| /** Offset 0x02AC - Reserved |
| **/ |
| UINT8 Reserved17; |
| |
| /** Offset 0x02AD - Reserved |
| **/ |
| UINT8 Reserved18; |
| |
| /** Offset 0x02AE - Reserved |
| **/ |
| UINT8 Reserved19; |
| |
| /** Offset 0x02AF - Reserved |
| **/ |
| UINT8 Reserved20; |
| |
| /** Offset 0x02B0 - Reserved |
| **/ |
| UINT8 Reserved21; |
| |
| /** Offset 0x02B1 - Reserved |
| **/ |
| UINT8 Reserved22[96]; |
| |
| /** Offset 0x0311 - Enable Gt CLOS |
| 0(Default)=Disable, 1=Enable |
| $EN_DIS |
| **/ |
| UINT8 GtClosEnable; |
| |
| /** Offset 0x0312 - DMI Max Link Speed |
| Auto (Default)(0x0): Maximum possible link speed, Gen1(0x1): Limit Link to Gen1 |
| Speed, Gen2(0x2): Limit Link to Gen2 Speed, Gen3(0x3):Limit Link to Gen3 Speed |
| 0:Auto, 1:Gen1, 2:Gen2, 3:Gen3 |
| **/ |
| UINT8 DmiMaxLinkSpeed; |
| |
| /** Offset 0x0313 - DMI Equalization Phase 2 |
| DMI Equalization Phase 2. (0x0): Disable phase 2, (0x1): Enable phase 2, (0x2)(Default): |
| AUTO - Use the current default method |
| 0:Disable phase2, 1:Enable phase2, 2:Auto |
| **/ |
| UINT8 DmiGen3EqPh2Enable; |
| |
| /** Offset 0x0314 - DMI Gen3 Equalization Phase3 |
| DMI Gen3 Equalization Phase3. Auto(0x0)(Default): Use the current default method, |
| HwEq(0x1): Use Adaptive Hardware Equalization, SwEq(0x2): Use Adaptive Software |
| Equalization (Implemented in BIOS Reference Code), Static(0x3): Use the Static |
| EQs provided in DmiGen3EndPointPreset array for Phase1 AND Phase3 (Instead of just |
| Phase1), Disabled(0x4): Bypass Equalization Phase 3 |
| 0:Auto, 1:HwEq, 2:SwEq, 3:StaticEq, 4:BypassPhase3 |
| **/ |
| UINT8 DmiGen3EqPh3Method; |
| |
| /** Offset 0x0315 - Enable/Disable DMI GEN3 Static EQ Phase1 programming |
| Program DMI Gen3 EQ Phase1 Static Presets. Disabled(0x0): Disable EQ Phase1 Static |
| Presets Programming, Enabled(0x1)(Default): Enable EQ Phase1 Static Presets Programming |
| $EN_DIS |
| **/ |
| UINT8 DmiGen3ProgramStaticEq; |
| |
| /** Offset 0x0316 - DeEmphasis control for DMI |
| DeEmphasis control for DMI. 0=-6dB, 1(Default)=-3.5 dB |
| 0: -6dB, 1: -3.5dB |
| **/ |
| UINT8 DmiDeEmphasis; |
| |
| /** Offset 0x0317 - DMI Gen3 Root port preset values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-9, 8 is default for each lane |
| **/ |
| UINT8 DmiGen3RootPortPreset[8]; |
| |
| /** Offset 0x031F - DMI Gen3 End port preset values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-9, 7 is default for each lane |
| **/ |
| UINT8 DmiGen3EndPointPreset[8]; |
| |
| /** Offset 0x0327 - DMI Gen3 End port Hint values per lane |
| Used for programming DMI Gen3 Hint values per lane. Range: 0-6, 2 is default for each lane |
| **/ |
| UINT8 DmiGen3EndPointHint[8]; |
| |
| /** Offset 0x032F - DMI Gen3 RxCTLEp per-Bundle control |
| Range: 0-15, 0 is default for each bundle, must be specified based upon platform design |
| **/ |
| UINT8 DmiGen3RxCtlePeaking[4]; |
| |
| /** Offset 0x0333 - DMI ASPM Configuration:{Combo |
| Set ASPM Configuration |
| 0:Disabled, 1:L0s, 2:L1, 3:L1L0s |
| **/ |
| UINT8 DmiAspm; |
| |
| /** Offset 0x0334 - Enable/Disable DMI GEN3 Hardware Eq |
| Enable/Disable DMI GEN3 Hardware Eq. Disabled(0x0)(Default): Disable Hardware Eq, |
| Enabled(0x1): Enable EQ Phase1 Static Presets Programming |
| $EN_DIS |
| **/ |
| UINT8 DmiHweq; |
| |
| /** Offset 0x0335 - Enable/Disable CPU DMI GEN3 Phase 23 Bypass |
| CPU DMI GEN3 Phase 23 Bypass. Disabled(0x0)(Default): Disable Phase 23 Bypass, Enabled(0x1): |
| Enable Phase 23 Bypass |
| $EN_DIS |
| **/ |
| UINT8 Gen3EqPhase23Bypass; |
| |
| /** Offset 0x0336 - Enable/Disable CPU DMI GEN3 Phase 3 Bypass |
| CPU DMI GEN3 Phase 3 Bypass. Disabled(0x0)(Default): Disable Phase 3 Bypass, Enabled(0x1): |
| Enable Phase 3 Bypass |
| $EN_DIS |
| **/ |
| UINT8 Gen3EqPhase3Bypass; |
| |
| /** Offset 0x0337 - Enable/Disable CPU DMI Gen3 EQ Local Transmitter Coefficient Override Enable |
| Program Gen3 EQ Local Transmitter Coefficient Override. Disabled(0x0)(Default): |
| Disable Local Transmitter Coefficient Override, Enabled(0x1): Enable Local Transmitter |
| Coefficient Override |
| $EN_DIS |
| **/ |
| UINT8 Gen3LtcoEnable; |
| |
| /** Offset 0x0338 - Enable/Disable CPU DMI Gen3 EQ Remote Transmitter Coefficient/Preset Override Enable |
| Program Remote Transmitter Coefficient/Preset Override. Disabled(0x0)(Default): |
| Disable Remote Transmitter Coefficient/Preset Override, Enabled(0x1): Enable Remote |
| Transmitter Coefficient/Preset Override |
| $EN_DIS |
| **/ |
| UINT8 Gen3RtcoRtpoEnable; |
| |
| /** Offset 0x0339 - DMI Gen3 Transmitter Pre-Cursor Coefficient |
| Used for programming DMI Gen3 Transmitter Pre-Cursor Coefficient . Range: 0-10, |
| 2 is default for each lane |
| **/ |
| UINT8 DmiGen3Ltcpre[8]; |
| |
| /** Offset 0x0341 - DMI Gen3 Transmitter Post-Cursor Coefficient |
| Used for programming Transmitter Post-Cursor Coefficient. Range: 0-9, 2 is default |
| for each lane |
| **/ |
| UINT8 DmiGen3Ltcpo[8]; |
| |
| /** Offset 0x0349 - PCIE Hw Eq Gen3 CoeffList Cm |
| CPU_PCIE_EQ_PARAM. Coefficient C-1. |
| **/ |
| UINT8 CpuDmiHwEqGen3CoeffListCm[8]; |
| |
| /** Offset 0x0351 - PCIE Hw Eq Gen3 CoeffList Cp |
| CPU_PCIE_EQ_PARAM. Coefficient C+1. |
| **/ |
| UINT8 CpuDmiHwEqGen3CoeffListCp[8]; |
| |
| /** Offset 0x0359 - Enable/Disable DMI GEN3 DmiGen3DsPresetEnable |
| Enable/Disable DMI GEN3 DmiGen3DsPreset. Auto(0x0)(Default): DmiGen3DsPresetEnable, |
| Manual(0x1): Enable DmiGen3DsPresetEnable |
| $EN_DIS |
| **/ |
| UINT8 DmiGen3DsPresetEnable; |
| |
| /** Offset 0x035A - DMI Gen3 Root port preset Rx values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-10, 1 is default |
| for each lane |
| **/ |
| UINT8 DmiGen3DsPortRxPreset[8]; |
| |
| /** Offset 0x0362 - DMI Gen3 Root port preset Tx values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default |
| for each lane |
| **/ |
| UINT8 DmiGen3DsPortTxPreset[8]; |
| |
| /** Offset 0x036A - Enable/Disable DMI GEN3 DmiGen3UsPresetEnable |
| Enable/Disable DMI GEN3 DmiGen3UsPreset. Auto(0x0)(Default): DmiGen3UsPresetEnable, |
| Manual(0x1): Enable DmiGen3UsPresetEnable |
| $EN_DIS |
| **/ |
| UINT8 DmiGen3UsPresetEnable; |
| |
| /** Offset 0x036B - DMI Gen3 Root port preset Rx values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default |
| for each lane |
| **/ |
| UINT8 DmiGen3UsPortRxPreset[8]; |
| |
| /** Offset 0x0373 - DMI Gen3 Root port preset Tx values per lane |
| Used for programming DMI Gen3 preset values per lane. Range: 0-10, 7 is default |
| for each lane |
| **/ |
| UINT8 DmiGen3UsPortTxPreset[8]; |
| |
| /** Offset 0x037B - Reserved |
| **/ |
| UINT8 Reserved23[8]; |
| |
| /** Offset 0x0383 - Reserved |
| **/ |
| UINT8 Reserved24[8]; |
| |
| /** Offset 0x038B - Reserved |
| **/ |
| UINT8 Reserved25; |
| |
| /** Offset 0x038C - Reserved |
| **/ |
| UINT8 Reserved26; |
| |
| /** Offset 0x038D - Reserved |
| **/ |
| UINT8 Reserved27; |
| |
| /** Offset 0x038E - Reserved |
| **/ |
| UINT8 Reserved28[8]; |
| |
| /** Offset 0x0396 - Reserved |
| **/ |
| UINT8 Reserved29; |
| |
| /** Offset 0x0397 - Reserved |
| **/ |
| UINT8 Reserved30; |
| |
| /** Offset 0x0398 - Reserved |
| **/ |
| UINT8 Reserved31[8]; |
| |
| /** Offset 0x03A0 - Reserved |
| **/ |
| UINT8 Reserved32[8]; |
| |
| /** Offset 0x03A8 - Reserved |
| **/ |
| UINT8 Reserved33; |
| |
| /** Offset 0x03A9 - Reserved |
| **/ |
| UINT8 Reserved34[8]; |
| |
| /** Offset 0x03B1 - DMI ASPM Control Configuration:{Combo |
| Set ASPM Control configuration |
| 0:Disabled, 1:L0s, 2:L1, 3:L1L0s |
| **/ |
| UINT8 DmiAspmCtrl; |
| |
| /** Offset 0x03B2 - DMI ASPM L1 exit Latency |
| Range: 0-7, 4 is default L1 exit Latency |
| **/ |
| UINT8 DmiAspmL1ExitLatency; |
| |
| /** Offset 0x03B3 - BIST on Reset |
| Enable or Disable BIST on Reset; <b>0: Disable</b>; 1: Enable. |
| $EN_DIS |
| **/ |
| UINT8 BistOnReset; |
| |
| /** Offset 0x03B4 - Skip Stop PBET Timer Enable/Disable |
| Skip Stop PBET Timer; <b>0: Disable</b>; 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 SkipStopPbet; |
| |
| /** Offset 0x03B5 - C6DRAM power gating feature |
| This policy indicates whether or not BIOS should allocate PRMRR memory for C6DRAM |
| power gating feature.- 0: Don't allocate any PRMRR memory for C6DRAM power gating |
| feature.- <b>1: Allocate PRMRR memory for C6DRAM power gating feature</b>. |
| $EN_DIS |
| **/ |
| UINT8 EnableC6Dram; |
| |
| /** Offset 0x03B6 - Over clocking support |
| Over clocking support; <b>0: Disable</b>; 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 OcSupport; |
| |
| /** Offset 0x03B7 - Over clocking Lock |
| Over clocking Lock Enable/Disable; 0: Disable; <b>1: Enable</b> |
| $EN_DIS |
| **/ |
| UINT8 OcLock; |
| |
| /** Offset 0x03B8 - Maximum Core Turbo Ratio Override |
| Maximum core turbo ratio override allows to increase CPU core frequency beyond the |
| fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 |
| **/ |
| UINT8 CoreMaxOcRatio; |
| |
| /** Offset 0x03B9 - Core voltage mode |
| Core voltage mode; <b>0: Adaptive</b>; 1: Override. |
| $EN_DIS |
| **/ |
| UINT8 CoreVoltageMode; |
| |
| /** Offset 0x03BA - Maximum clr turbo ratio override |
| Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the |
| fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-85 |
| **/ |
| UINT8 RingMaxOcRatio; |
| |
| /** Offset 0x03BB - Hyper Threading Enable/Disable |
| Enable or Disable Hyper Threading; 0: Disable; <b>1: Enable</b> |
| $EN_DIS |
| **/ |
| UINT8 HyperThreading; |
| |
| /** Offset 0x03BC - Enable or Disable CPU Ratio Override |
| Enable or Disable CPU Ratio Override; <b>0: Disable</b>; 1: Enable. |
| $EN_DIS |
| **/ |
| UINT8 CpuRatioOverride; |
| |
| /** Offset 0x03BD - CPU ratio value |
| CPU ratio value. Valid Range 0 to 63 |
| **/ |
| UINT8 CpuRatio; |
| |
| /** Offset 0x03BE - Boot frequency |
| Sets the boot frequency starting from reset vector.- 0: Maximum battery performance. |
| 1: Maximum non-turbo performance. <b>2: Turbo performance </b> |
| 0:0, 1:1, 2:2 |
| **/ |
| UINT8 BootFrequency; |
| |
| /** Offset 0x03BF - Number of active big cores |
| Number of active big cores(Depends on Number of big cores). Default 0xFF means to |
| active all system supported big cores. <b>0xFF: Active all big cores</b>; 0: Disable |
| all big cores; 1: 1; 2: 2; 3: 3; |
| 0:Disable all big cores, 1:1, 2:2, 3:3, 0xFF:Active all big cores |
| **/ |
| UINT8 ActiveCoreCount; |
| |
| /** Offset 0x03C0 - Processor Early Power On Configuration FCLK setting |
| <b>0: 800 MHz (ULT/ULX)</b>. <b>1: 1 GHz (DT/Halo)</b>. Not supported on ULT/ULX.- |
| 2: 400 MHz. - 3: Reserved |
| 0:800 MHz, 1: 1 GHz, 2: 400 MHz, 3: Reserved |
| **/ |
| UINT8 FClkFrequency; |
| |
| /** Offset 0x03C1 - Set JTAG power in C10 and deeper power states |
| False: JTAG is power gated in C10 state. True: keeps the JTAG power up during C10 |
| and deeper power states for debug purpose. <b>0: False</b>; 1: True. |
| 0: False, 1: True |
| **/ |
| UINT8 JtagC10PowerGateDisable; |
| |
| /** Offset 0x03C2 - Enable or Disable VMX |
| Enable or Disable VMX; 0: Disable; <b>1: Enable</b>. |
| $EN_DIS |
| **/ |
| UINT8 VmxEnable; |
| |
| /** Offset 0x03C3 - AVX2 Ratio Offset |
| 0(Default)= No Offset. Range 0 - 31. Specifies number of bins to decrease AVX ratio |
| vs. Core Ratio. Uses Mailbox MSR 0x150, cmd 0x1B. |
| **/ |
| UINT8 Avx2RatioOffset; |
| |
| /** Offset 0x03C4 - AVX3 Ratio Offset |
| DEPRECATED |
| **/ |
| UINT8 Avx3RatioOffset; |
| |
| /** Offset 0x03C5 - BCLK Adaptive Voltage Enable |
| When enabled, the CPU V/F curves are aware of BCLK frequency when calculated. </b>0: |
| Disable;<b> 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 BclkAdaptiveVoltage; |
| |
| /** Offset 0x03C6 - core voltage override |
| The core voltage override which is applied to the entire range of cpu core frequencies. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 CoreVoltageOverride; |
| |
| /** Offset 0x03C8 - Core Turbo voltage Adaptive |
| Extra Turbo voltage applied to the cpu core when the cpu is operating in turbo mode. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 CoreVoltageAdaptive; |
| |
| /** Offset 0x03CA - Core Turbo voltage Offset |
| The voltage offset applied to the core while operating in turbo mode.Valid Range 0 to 1000 |
| **/ |
| UINT16 CoreVoltageOffset; |
| |
| /** Offset 0x03CC - Core PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 |
| **/ |
| UINT8 CorePllVoltageOffset; |
| |
| /** Offset 0x03CD - Reserved |
| **/ |
| UINT8 Reserved35; |
| |
| /** Offset 0x03CE - Ring Downbin |
| Ring Downbin enable/disable. When enabled, CPU will ensure the ring ratio is always |
| lower than the core ratio.0: Disable; <b>1: Enable.</b> |
| $EN_DIS |
| **/ |
| UINT8 RingDownBin; |
| |
| /** Offset 0x03CF - Ring voltage mode |
| Ring voltage mode; <b>0: Adaptive</b>; 1: Override. |
| $EN_DIS |
| **/ |
| UINT8 RingVoltageMode; |
| |
| /** Offset 0x03D0 - TjMax Offset |
| TjMax offset.Specified value here is clipped by pCode (125 - TjMax Offset) to support |
| TjMax in the range of 62 to 115 deg Celsius. Valid Range 10 - 63 |
| **/ |
| UINT8 TjMaxOffset; |
| |
| /** Offset 0x03D1 - Reserved |
| **/ |
| UINT8 Reserved36; |
| |
| /** Offset 0x03D2 - Ring voltage override |
| The ring voltage override which is applied to the entire range of cpu ring frequencies. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 RingVoltageOverride; |
| |
| /** Offset 0x03D4 - Ring Turbo voltage Adaptive |
| Extra Turbo voltage applied to the cpu ring when the cpu is operating in turbo mode. |
| Valid Range 0 to 2000 |
| **/ |
| UINT16 RingVoltageAdaptive; |
| |
| /** Offset 0x03D6 - Ring Turbo voltage Offset |
| The voltage offset applied to the ring while operating in turbo mode. Valid Range 0 to 1000 |
| **/ |
| UINT16 RingVoltageOffset; |
| |
| /** Offset 0x03D8 - Enable or Disable TME |
| Enable or Disable TME; <b>0: Disable</b>; 1: Enable. |
| $EN_DIS |
| **/ |
| UINT8 TmeEnable; |
| |
| /** Offset 0x03D9 - Enable CPU CrashLog |
| Enable or Disable CPU CrashLog; 0: Disable; <b>1: Enable</b>. |
| $EN_DIS |
| **/ |
| UINT8 CpuCrashLogEnable; |
| |
| /** Offset 0x03DA - CPU Run Control |
| Enable, Disable or Do not configure CPU Run Control; 0: Disable; 1: Enable ; <b>2: |
| No Change</b> |
| 0:Disabled, 1:Enabled, 2:No Change |
| **/ |
| UINT8 DebugInterfaceEnable; |
| |
| /** Offset 0x03DB - CPU Run Control Lock |
| Lock or Unlock CPU Run Control; 0: Disable; <b>1: Enable</b>. |
| $EN_DIS |
| **/ |
| UINT8 DebugInterfaceLockEnable; |
| |
| /** Offset 0x03DC - Reserved |
| **/ |
| UINT8 Reserved37; |
| |
| /** Offset 0x03DD - Reserved |
| **/ |
| UINT8 Reserved38; |
| |
| /** Offset 0x03DE - Reserved |
| **/ |
| UINT16 Reserved39; |
| |
| /** Offset 0x03E0 - Reserved |
| **/ |
| UINT16 Reserved40; |
| |
| /** Offset 0x03E2 - Reserved |
| **/ |
| UINT16 Reserved41; |
| |
| /** Offset 0x03E4 - Reserved |
| **/ |
| UINT16 Reserved42[4]; |
| |
| /** Offset 0x03EC - Reserved |
| **/ |
| UINT8 Reserved43[4]; |
| |
| /** Offset 0x03F0 - Reserved |
| **/ |
| UINT8 Reserved44; |
| |
| /** Offset 0x03F1 - Reserved |
| **/ |
| UINT8 Reserved45; |
| |
| /** Offset 0x03F2 - Reserved |
| **/ |
| UINT8 Reserved46; |
| |
| /** Offset 0x03F3 - Reserved |
| **/ |
| UINT8 Reserved47; |
| |
| /** Offset 0x03F4 - Core VF Point Offset Mode |
| Selects Core Voltage & Frequency Offset mode between Legacy and Selection modes. |
| In Legacy Mode, setting a global offset for the entire VF curve. In Selection Mode, |
| setting a selected VF point; <b>0: Legacy</b>; 1: Selection. |
| 0:Legacy, 1:Selection |
| **/ |
| UINT8 CoreVfPointOffsetMode; |
| |
| /** Offset 0x03F5 - Reserved |
| **/ |
| UINT8 Reserved48[1]; |
| |
| /** Offset 0x03F6 - Core VF Point Offset |
| Array used to specifies the Core Voltage Offset applied to the each selected VF |
| Point. This voltage is specified in millivolts. |
| **/ |
| UINT16 CoreVfPointOffset[15]; |
| |
| /** Offset 0x0414 - Core VF Point Offset Prefix |
| Sets the CoreVfPointOffset value as positive or negative for corresponding core |
| VF Point; <b>0: Positive </b>; 1: Negative. |
| 0:Positive, 1:Negative |
| **/ |
| UINT8 CoreVfPointOffsetPrefix[15]; |
| |
| /** Offset 0x0423 - Core VF Point Ratio |
| Array for the each selected Core VF Point to display the ration. |
| **/ |
| UINT8 CoreVfPointRatio[15]; |
| |
| /** Offset 0x0432 - Core VF Point Count |
| Number of supported Core Voltage & Frequency Point Offset |
| **/ |
| UINT8 CoreVfPointCount; |
| |
| /** Offset 0x0433 - Reserved |
| **/ |
| UINT8 Reserved49; |
| |
| /** Offset 0x0434 - Reserved |
| **/ |
| UINT16 Reserved50[8]; |
| |
| /** Offset 0x0444 - Reserved |
| **/ |
| UINT8 Reserved51[8]; |
| |
| /** Offset 0x044C - Per Core Max Ratio override |
| Enable or disable Per Core PState OC supported by writing OCMB 0x1D to program new |
| favored core ratio to each Core. <b>0: Disable</b>, 1: enable |
| $EN_DIS |
| **/ |
| UINT8 PerCoreRatioOverride; |
| |
| /** Offset 0x044D - Per Core Current Max Ratio |
| Array for the Per Core Max Ratio |
| **/ |
| UINT8 PerCoreRatio[8]; |
| |
| /** Offset 0x0455 - Reserved |
| **/ |
| UINT8 Reserved52[4]; |
| |
| /** Offset 0x0459 - Reserved |
| **/ |
| UINT8 Reserved53; |
| |
| /** Offset 0x045A - Pvd Ratio Threshold |
| Select PVD Ratio Threshold Value from Range 1 to 40. 0 - Auto/Default. |
| **/ |
| UINT8 PvdRatioThreshold; |
| |
| /** Offset 0x045B - Support Unlimited ICCMAX |
| DEPRECATED |
| $EN_DIS |
| **/ |
| UINT8 UnlimitedIccMax; |
| |
| /** Offset 0x045C - Enable CPU CrashLog GPRs dump |
| Enable or Disable CPU CrashLog GPRs dump; <b>0: Disable</b>; 1: Enable; 2: Only |
| disable Smm GPRs dump |
| 0:Disabled, 1:Enabled, 2:Only Smm GPRs Disabled |
| **/ |
| UINT8 CrashLogGprs; |
| |
| /** Offset 0x045D - Reserved |
| **/ |
| UINT8 Reserved54; |
| |
| /** Offset 0x045E - Reserved |
| **/ |
| UINT16 Reserved55[15]; |
| |
| /** Offset 0x047C - Reserved |
| **/ |
| UINT8 Reserved56[15]; |
| |
| /** Offset 0x048B - Reserved |
| **/ |
| UINT8 Reserved57[15]; |
| |
| /** Offset 0x049A - Reserved |
| **/ |
| UINT8 Reserved58; |
| |
| /** Offset 0x049B - BCLK Frequency Source |
| Clock source of BCLK OC frequency, <b>1:CPU BCLK</b>, 2:PCH BCLK, 3:External CLK |
| 1:CPU BCLK, 2:PCH BCLK, 3:External CLK |
| **/ |
| UINT8 BclkSource; |
| |
| /** Offset 0x049C - GPIO Override |
| Gpio Override Level - FSP will not configure any GPIOs and rely on GPIO setings |
| before moved to FSP. Available configurations 0: Disable; 1: Level 1 - Skips GPIO |
| configuration in PEI/FSPM/FSPT phase;2: Level 2 - Reserved for future use |
| **/ |
| UINT8 GpioOverride; |
| |
| /** Offset 0x049D - Reserved |
| **/ |
| UINT8 Reserved59[3]; |
| |
| /** Offset 0x04A0 - CPU BCLK OC Frequency |
| CPU BCLK OC Frequency in 10KHz units increasing. Value 9800 (10KHz) = 98MHz <b>0 |
| - Auto</b>. Range is 8000-50000 (10KHz). |
| **/ |
| UINT32 CpuBclkOcFrequency; |
| |
| /** Offset 0x04A4 - Reserved |
| **/ |
| UINT32 Reserved60; |
| |
| /** Offset 0x04A8 - Reserved |
| **/ |
| UINT32 Reserved61; |
| |
| /** Offset 0x04AC - Reserved |
| **/ |
| UINT8 Reserved62; |
| |
| /** Offset 0x04AD - Reserved |
| **/ |
| UINT8 Reserved63; |
| |
| /** Offset 0x04AE - Reserved |
| **/ |
| UINT8 Reserved64; |
| |
| /** Offset 0x04AF - Reserved |
| **/ |
| UINT8 Reserved65; |
| |
| /** Offset 0x04B0 - Reserved |
| **/ |
| UINT16 Reserved66; |
| |
| /** Offset 0x04B2 - Reserved |
| **/ |
| UINT8 Reserved67; |
| |
| /** Offset 0x04B3 - Reserved |
| **/ |
| UINT8 Reserved68; |
| |
| /** Offset 0x04B4 - Reserved |
| **/ |
| UINT16 Reserved69; |
| |
| /** Offset 0x04B6 - Reserved |
| **/ |
| UINT8 Reserved70; |
| |
| /** Offset 0x04B7 - Reserved |
| **/ |
| UINT8 Reserved71; |
| |
| /** Offset 0x04B8 - Reserved |
| **/ |
| UINT8 Reserved72; |
| |
| /** Offset 0x04B9 - Reserved |
| **/ |
| UINT8 Reserved73; |
| |
| /** Offset 0x04BA - Reserved |
| **/ |
| UINT8 Reserved74; |
| |
| /** Offset 0x04BB - Reserved |
| **/ |
| UINT8 Reserved75; |
| |
| /** Offset 0x04BC - Reserved |
| **/ |
| UINT8 Reserved76; |
| |
| /** Offset 0x04BD - Reserved |
| **/ |
| UINT8 Reserved77[3]; |
| |
| /** Offset 0x04C0 - Reserved |
| **/ |
| UINT32 Reserved78; |
| |
| /** Offset 0x04C4 - Reserved |
| **/ |
| UINT8 Reserved79; |
| |
| /** Offset 0x04C5 - Reserved |
| **/ |
| UINT8 Reserved80; |
| |
| /** Offset 0x04C6 - Reserved |
| **/ |
| UINT8 Reserved81[6]; |
| |
| /** Offset 0x04CC - BiosGuard |
| Enable/Disable. 0: Disable, Enable/Disable BIOS Guard feature, 1: enable |
| $EN_DIS |
| **/ |
| UINT8 BiosGuard; |
| |
| /** Offset 0x04CD |
| **/ |
| UINT8 BiosGuardToolsInterface; |
| |
| /** Offset 0x04CE - Txt |
| Enable/Disable. 0: Disable, Enable/Disable Txt feature, 1: enable |
| $EN_DIS |
| **/ |
| UINT8 Txt; |
| |
| /** Offset 0x04CF - Reserved |
| **/ |
| UINT8 Reserved82; |
| |
| /** Offset 0x04D0 - PrmrrSize |
| Enable/Disable. 0: Disable, define default value of PrmrrSize , 1: enable |
| **/ |
| UINT32 PrmrrSize; |
| |
| /** Offset 0x04D4 - SinitMemorySize |
| Enable/Disable. 0: Disable, define default value of SinitMemorySize , 1: enable |
| **/ |
| UINT32 SinitMemorySize; |
| |
| /** Offset 0x04D8 - TxtDprMemoryBase |
| Enable/Disable. 0: Disable, define default value of TxtDprMemoryBase , 1: enable |
| **/ |
| UINT64 TxtDprMemoryBase; |
| |
| /** Offset 0x04E0 - TxtHeapMemorySize |
| Enable/Disable. 0: Disable, define default value of TxtHeapMemorySize , 1: enable |
| **/ |
| UINT32 TxtHeapMemorySize; |
| |
| /** Offset 0x04E4 - TxtDprMemorySize |
| Enable/Disable. 0: Disable, define default value of TxtDprMemorySize , 1: enable |
| **/ |
| UINT32 TxtDprMemorySize; |
| |
| /** Offset 0x04E8 - BiosAcmBase |
| Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable |
| **/ |
| UINT32 BiosAcmBase; |
| |
| /** Offset 0x04EC - BiosAcmSize |
| Enable/Disable. 0: Disable, define default value of BiosAcmSize , 1: enable |
| **/ |
| UINT32 BiosAcmSize; |
| |
| /** Offset 0x04F0 - ApStartupBase |
| Enable/Disable. 0: Disable, define default value of BiosAcmBase , 1: enable |
| **/ |
| UINT32 ApStartupBase; |
| |
| /** Offset 0x04F4 - TgaSize |
| Enable/Disable. 0: Disable, define default value of TgaSize , 1: enable |
| **/ |
| UINT32 TgaSize; |
| |
| /** Offset 0x04F8 - TxtLcpPdBase |
| Enable/Disable. 0: Disable, define default value of TxtLcpPdBase , 1: enable |
| **/ |
| UINT64 TxtLcpPdBase; |
| |
| /** Offset 0x0500 - TxtLcpPdSize |
| Enable/Disable. 0: Disable, define default value of TxtLcpPdSize , 1: enable |
| **/ |
| UINT64 TxtLcpPdSize; |
| |
| /** Offset 0x0508 - IsTPMPresence |
| IsTPMPresence default values |
| **/ |
| UINT8 IsTPMPresence; |
| |
| /** Offset 0x0509 - Reserved |
| **/ |
| UINT8 Reserved83[32]; |
| |
| /** Offset 0x0529 - Enable PCH HSIO PCIE Rx Set Ctle |
| Enable PCH PCIe Gen 3 Set CTLE Value. |
| **/ |
| UINT8 PchPcieHsioRxSetCtleEnable[28]; |
| |
| /** Offset 0x0545 - PCH HSIO PCIE Rx Set Ctle Value |
| PCH PCIe Gen 3 Set CTLE Value. |
| **/ |
| UINT8 PchPcieHsioRxSetCtle[28]; |
| |
| /** Offset 0x0561 - Enble PCH HSIO PCIE TX Gen 1 Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen1DownscaleAmpEnable[28]; |
| |
| /** Offset 0x057D - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value |
| PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchPcieHsioTxGen1DownscaleAmp[28]; |
| |
| /** Offset 0x0599 - Enable PCH HSIO PCIE TX Gen 2 Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen2DownscaleAmpEnable[28]; |
| |
| /** Offset 0x05B5 - PCH HSIO PCIE Gen 2 TX Output Downscale Amplitude Adjustment value |
| PCH PCIe Gen 2 TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchPcieHsioTxGen2DownscaleAmp[28]; |
| |
| /** Offset 0x05D1 - Enable PCH HSIO PCIE TX Gen 3 Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen3DownscaleAmpEnable[28]; |
| |
| /** Offset 0x05ED - PCH HSIO PCIE Gen 3 TX Output Downscale Amplitude Adjustment value |
| PCH PCIe Gen 3 TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchPcieHsioTxGen3DownscaleAmp[28]; |
| |
| /** Offset 0x0609 - Enable PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen1DeEmphEnable[28]; |
| |
| /** Offset 0x0625 - PCH HSIO PCIE Gen 1 TX Output De-Emphasis Adjustment value |
| PCH PCIe Gen 1 TX Output De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchPcieHsioTxGen1DeEmph[28]; |
| |
| /** Offset 0x0641 - Enable PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen2DeEmph3p5Enable[28]; |
| |
| /** Offset 0x065D - PCH HSIO PCIE Gen 2 TX Output -3.5dB De-Emphasis Adjustment value |
| PCH PCIe Gen 2 TX Output -3.5dB De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchPcieHsioTxGen2DeEmph3p5[28]; |
| |
| /** Offset 0x0679 - Enable PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchPcieHsioTxGen2DeEmph6p0Enable[28]; |
| |
| /** Offset 0x0695 - PCH HSIO PCIE Gen 2 TX Output -6.0dB De-Emphasis Adjustment value |
| PCH PCIe Gen 2 TX Output -6.0dB De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchPcieHsioTxGen2DeEmph6p0[28]; |
| |
| /** Offset 0x06B1 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioRxGen1EqBoostMagEnable[8]; |
| |
| /** Offset 0x06B9 - PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value |
| PCH HSIO SATA 1.5 Gb/s Receiver Equalization Boost Magnitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioRxGen1EqBoostMag[8]; |
| |
| /** Offset 0x06C1 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioRxGen2EqBoostMagEnable[8]; |
| |
| /** Offset 0x06C9 - PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value |
| PCH HSIO SATA 3.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioRxGen2EqBoostMag[8]; |
| |
| /** Offset 0x06D1 - Enable PCH HSIO SATA Receiver Equalization Boost Magnitude Adjustment Value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioRxGen3EqBoostMagEnable[8]; |
| |
| /** Offset 0x06D9 - PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value |
| PCH HSIO SATA 6.0 Gb/s Receiver Equalization Boost Magnitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioRxGen3EqBoostMag[8]; |
| |
| /** Offset 0x06E1 - Enable PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen1DownscaleAmpEnable[8]; |
| |
| /** Offset 0x06E9 - PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value |
| PCH HSIO SATA 1.5 Gb/s TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioTxGen1DownscaleAmp[8]; |
| |
| /** Offset 0x06F1 - Enable PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen2DownscaleAmpEnable[8]; |
| |
| /** Offset 0x06F9 - PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value |
| PCH HSIO SATA 3.0 Gb/s TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioTxGen2DownscaleAmp[8]; |
| |
| /** Offset 0x0701 - Enable PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen3DownscaleAmpEnable[8]; |
| |
| /** Offset 0x0709 - PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value |
| PCH HSIO SATA 6.0 Gb/s TX Output Downscale Amplitude Adjustment value. |
| **/ |
| UINT8 PchSataHsioTxGen3DownscaleAmp[8]; |
| |
| /** Offset 0x0711 - Enable PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen1DeEmphEnable[8]; |
| |
| /** Offset 0x0719 - PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting |
| PCH HSIO SATA 1.5 Gb/s TX Output De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchSataHsioTxGen1DeEmph[8]; |
| |
| /** Offset 0x0721 - Enable PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen2DeEmphEnable[8]; |
| |
| /** Offset 0x0729 - PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting |
| PCH HSIO SATA 3.0 Gb/s TX Output De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchSataHsioTxGen2DeEmph[8]; |
| |
| /** Offset 0x0731 - Enable PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting value override |
| 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchSataHsioTxGen3DeEmphEnable[8]; |
| |
| /** Offset 0x0739 - PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting |
| PCH HSIO SATA 6.0 Gb/s TX Output De-Emphasis Adjustment Setting. |
| **/ |
| UINT8 PchSataHsioTxGen3DeEmph[8]; |
| |
| /** Offset 0x0741 - PCH LPC Enhanced Port 80 Decoding |
| Original LPC only decodes one byte of port 80h. |
| $EN_DIS |
| **/ |
| UINT8 PchLpcEnhancePort8xhDecoding; |
| |
| /** Offset 0x0742 - PCH Port80 Route |
| Control where the Port 80h cycles are sent, 0: LPC; 1: PCI. |
| 0:LPC, 1:PCI |
| **/ |
| UINT8 PchPort80Route; |
| |
| /** Offset 0x0743 - Enable SMBus ARP support |
| Enable SMBus ARP support. |
| $EN_DIS |
| **/ |
| UINT8 SmbusArpEnable; |
| |
| /** Offset 0x0744 - Number of RsvdSmbusAddressTable. |
| The number of elements in the RsvdSmbusAddressTable. |
| **/ |
| UINT8 PchNumRsvdSmbusAddresses; |
| |
| /** Offset 0x0745 - Reserved |
| **/ |
| UINT8 Reserved84; |
| |
| /** Offset 0x0746 - SMBUS Base Address |
| SMBUS Base Address (IO space). |
| **/ |
| UINT16 PchSmbusIoBase; |
| |
| /** Offset 0x0748 - Enable SMBus Alert Pin |
| Enable SMBus Alert Pin. |
| $EN_DIS |
| **/ |
| UINT8 PchSmbAlertEnable; |
| |
| /** Offset 0x0749 - Usage type for ClkSrc |
| 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use |
| (free running), 0xFF: not used |
| **/ |
| UINT8 PcieClkSrcUsage[18]; |
| |
| /** Offset 0x075B - Reserved |
| **/ |
| UINT8 Reserved85[14]; |
| |
| /** Offset 0x0769 - ClkReq-to-ClkSrc mapping |
| Number of ClkReq signal assigned to ClkSrc |
| **/ |
| UINT8 PcieClkSrcClkReq[18]; |
| |
| /** Offset 0x077B - Reserved |
| **/ |
| UINT8 Reserved86[14]; |
| |
| /** Offset 0x0789 - Reserved |
| **/ |
| UINT8 Reserved87[3]; |
| |
| /** Offset 0x078C - Reserved |
| **/ |
| UINT32 Reserved88[18]; |
| |
| /** Offset 0x07D4 - Reserved |
| **/ |
| UINT32 Reserved89; |
| |
| /** Offset 0x07D8 - Enable PCIE RP Mask |
| Enable/disable PCIE Root Ports. 0: disable, 1: enable. One bit for each port, bit0 |
| for port1, bit1 for port2, and so on. |
| **/ |
| UINT32 PcieRpEnableMask; |
| |
| /** Offset 0x07DC - VC Type |
| Virtual Channel Type Select: 0: VC0, 1: VC1. |
| 0: VC0, 1: VC1 |
| **/ |
| UINT8 PchHdaVcType; |
| |
| /** Offset 0x07DD - Universal Audio Architecture compliance for DSP enabled system |
| 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox |
| driver or SST driver supported). |
| $EN_DIS |
| **/ |
| UINT8 PchHdaDspUaaCompliance; |
| |
| /** Offset 0x07DE - Enable HD Audio Link |
| Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1. |
| $EN_DIS |
| **/ |
| UINT8 PchHdaAudioLinkHdaEnable; |
| |
| /** Offset 0x07DF - Enable HDA SDI lanes |
| Enable/disable HDA SDI lanes. |
| **/ |
| UINT8 PchHdaSdiEnable[2]; |
| |
| /** Offset 0x07E1 - HDA Power/Clock Gating (PGD/CGD) |
| Enable/Disable HD Audio Power and Clock Gating(POR: Enable). 0: PLATFORM_POR, 1: |
| FORCE_ENABLE, 2: FORCE_DISABLE. |
| 0: POR, 1: Force Enable, 2: Force Disable |
| **/ |
| UINT8 PchHdaTestPowerClockGating; |
| |
| /** Offset 0x07E2 - Enable HD Audio DMIC_N Link |
| Enable/disable HD Audio DMIC1 link. Muxed with SNDW3. |
| **/ |
| UINT8 PchHdaAudioLinkDmicEnable[2]; |
| |
| /** Offset 0x07E4 - DMIC<N> ClkA Pin Muxing (N - DMIC number) |
| Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKA_* |
| **/ |
| UINT32 PchHdaAudioLinkDmicClkAPinMux[2]; |
| |
| /** Offset 0x07EC - DMIC<N> ClkB Pin Muxing |
| Determines DMIC<N> ClkA Pin muxing. See GPIO_*_MUXING_DMIC<N>_CLKB_* |
| **/ |
| UINT32 PchHdaAudioLinkDmicClkBPinMux[2]; |
| |
| /** Offset 0x07F4 - Enable HD Audio DSP |
| Enable/disable HD Audio DSP feature. |
| $EN_DIS |
| **/ |
| UINT8 PchHdaDspEnable; |
| |
| /** Offset 0x07F5 - Reserved |
| **/ |
| UINT8 Reserved90[3]; |
| |
| /** Offset 0x07F8 - DMIC<N> Data Pin Muxing |
| Determines DMIC<N> Data Pin muxing. See GPIO_*_MUXING_DMIC<N>_DATA_* |
| **/ |
| UINT32 PchHdaAudioLinkDmicDataPinMux[2]; |
| |
| /** Offset 0x0800 - Enable HD Audio SSP0 Link |
| Enable/disable HD Audio SSP_N/I2S link. Muxed with HDA. N-number 0-5 |
| **/ |
| UINT8 PchHdaAudioLinkSspEnable[6]; |
| |
| /** Offset 0x0806 - Enable HD Audio SoundWire#N Link |
| Enable/disable HD Audio SNDW#N link. Muxed with HDA. |
| **/ |
| UINT8 PchHdaAudioLinkSndwEnable[4]; |
| |
| /** Offset 0x080A - iDisp-Link Frequency |
| iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz. |
| 4: 96MHz, 3: 48MHz |
| **/ |
| UINT8 PchHdaIDispLinkFrequency; |
| |
| /** Offset 0x080B - iDisp-Link T-mode |
| iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 2: 4T, 3: 8T, 4: 16T |
| 0: 2T, 2: 4T, 3: 8T, 4: 16T |
| **/ |
| UINT8 PchHdaIDispLinkTmode; |
| |
| /** Offset 0x080C - iDisplay Audio Codec disconnection |
| 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable. |
| $EN_DIS |
| **/ |
| UINT8 PchHdaIDispCodecDisconnect; |
| |
| /** Offset 0x080D - CNVi DDR RFI Mitigation |
| Enable/Disable DDR RFI Mitigation. Default is ENABLE. 0: DISABLE, 1: ENABLE |
| $EN_DIS |
| **/ |
| UINT8 CnviDdrRfim; |
| |
| /** Offset 0x080E - Debug Interfaces |
| Debug Interfaces. BIT0-RAM, BIT1-UART, BIT3-USB3, BIT4-Serial IO, BIT5-TraceHub, |
| BIT2 - Not used. |
| **/ |
| UINT8 PcdDebugInterfaceFlags; |
| |
| /** Offset 0x080F - Serial Io Uart Debug Controller Number |
| Select SerialIo Uart Controller for debug. Note: If UART0 is selected as CNVi BT |
| Core interface, it cannot be used for debug purpose. |
| 0:SerialIoUart0, 1:SerialIoUart1, 2:SerialIoUart2 |
| **/ |
| UINT8 SerialIoUartDebugControllerNumber; |
| |
| /** Offset 0x0810 - Serial Io Uart Debug Auto Flow |
| Enables UART hardware flow control, CTS and RTS lines. |
| $EN_DIS |
| **/ |
| UINT8 SerialIoUartDebugAutoFlow; |
| |
| /** Offset 0x0811 - Reserved |
| **/ |
| UINT8 Reserved91[3]; |
| |
| /** Offset 0x0814 - Serial Io Uart Debug BaudRate |
| Set default BaudRate Supported from 0 - default to 6000000. Recommended values 9600, |
| 19200, 57600, 115200, 460800, 921600, 1500000, 1843200, 3000000, 3686400, 6000000 |
| **/ |
| UINT32 SerialIoUartDebugBaudRate; |
| |
| /** Offset 0x0818 - Serial Io Uart Debug Parity |
| Set default Parity. |
| 0: DefaultParity, 1: NoParity, 2: EvenParity, 3: OddParity |
| **/ |
| UINT8 SerialIoUartDebugParity; |
| |
| /** Offset 0x0819 - Serial Io Uart Debug Stop Bits |
| Set default stop bits. |
| 0: DefaultStopBits, 1: OneStopBit, 2: OneFiveStopBits, 3: TwoStopBits |
| **/ |
| UINT8 SerialIoUartDebugStopBits; |
| |
| /** Offset 0x081A - Serial Io Uart Debug Data Bits |
| Set default word length. 0: Default, 5,6,7,8 |
| 5:5BITS, 6:6BITS, 7:7BITS, 8:8BITS |
| **/ |
| UINT8 SerialIoUartDebugDataBits; |
| |
| /** Offset 0x081B - Reserved |
| **/ |
| UINT8 Reserved92; |
| |
| /** Offset 0x081C - Serial Io Uart Debug Mmio Base |
| Select SerialIo Uart default MMIO resource in SEC/PEI phase when PcdSerialIoUartMode |
| = SerialIoUartPci. |
| **/ |
| UINT32 SerialIoUartDebugMmioBase; |
| |
| /** Offset 0x0820 - ISA Serial Base selection |
| Select ISA Serial Base address. Default is 0x3F8. |
| 0:0x3F8, 1:0x2F8 |
| **/ |
| UINT8 PcdIsaSerialUartBase; |
| |
| /** Offset 0x0821 - GT PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 |
| **/ |
| UINT8 GtPllVoltageOffset; |
| |
| /** Offset 0x0822 - Ring PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 |
| **/ |
| UINT8 RingPllVoltageOffset; |
| |
| /** Offset 0x0823 - System Agent PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 |
| **/ |
| UINT8 SaPllVoltageOffset; |
| |
| /** Offset 0x0824 - Memory Controller PLL voltage offset |
| Core PLL voltage offset. <b>0: No offset</b>. Range 0-15 |
| **/ |
| UINT8 McPllVoltageOffset; |
| |
| /** Offset 0x0825 - MRC Safe Config |
| Enables/Disable MRC Safe Config |
| $EN_DIS |
| **/ |
| UINT8 MrcSafeConfig; |
| |
| /** Offset 0x0826 - TCSS Thunderbolt PCIE Root Port 0 Enable |
| Set TCSS Thunderbolt PCIE Root Port 0. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssItbtPcie0En; |
| |
| /** Offset 0x0827 - TCSS Thunderbolt PCIE Root Port 1 Enable |
| Set TCSS Thunderbolt PCIE Root Port 1. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssItbtPcie1En; |
| |
| /** Offset 0x0828 - TCSS Thunderbolt PCIE Root Port 2 Enable |
| Set TCSS Thunderbolt PCIE Root Port 2. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssItbtPcie2En; |
| |
| /** Offset 0x0829 - TCSS Thunderbolt PCIE Root Port 3 Enable |
| Set TCSS Thunderbolt PCIE Root Port 3. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssItbtPcie3En; |
| |
| /** Offset 0x082A - TCSS USB HOST (xHCI) Enable |
| Set TCSS XHCI. 0:Disabled 1:Enabled - Must be enabled if xDCI is enabled below |
| $EN_DIS |
| **/ |
| UINT8 TcssXhciEn; |
| |
| /** Offset 0x082B - TCSS USB DEVICE (xDCI) Enable |
| Set TCSS XDCI. 0:Disabled 1:Enabled - xHCI must be enabled if xDCI is enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssXdciEn; |
| |
| /** Offset 0x082C - TCSS DMA0 Enable |
| Set TCSS DMA0. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssDma0En; |
| |
| /** Offset 0x082D - TCSS DMA1 Enable |
| Set TCSS DMA1. 0:Disabled 1:Enabled |
| $EN_DIS |
| **/ |
| UINT8 TcssDma1En; |
| |
| /** Offset 0x082E - PcdSerialDebugBaudRate |
| Baud Rate for Serial Debug Messages. 3:9600, 4:19200, 6:56700, 7:115200. |
| 3:9600, 4:19200, 6:56700, 7:115200 |
| **/ |
| UINT8 PcdSerialDebugBaudRate; |
| |
| /** Offset 0x082F - HobBufferSize |
| Size to set HOB Buffer. 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value(assuming 63KB |
| total HOB size). |
| 0:Default, 1: 1 Byte, 2: 1 KB, 3: Max value |
| **/ |
| UINT8 HobBufferSize; |
| |
| /** Offset 0x0830 - Early Command Training |
| Enables/Disable Early Command Training |
| $EN_DIS |
| **/ |
| UINT8 ECT; |
| |
| /** Offset 0x0831 - SenseAmp Offset Training |
| Enables/Disable SenseAmp Offset Training |
| $EN_DIS |
| **/ |
| UINT8 SOT; |
| |
| /** Offset 0x0832 - Early ReadMPR Timing Centering 2D |
| Enables/Disable Early ReadMPR Timing Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 ERDMPRTC2D; |
| |
| /** Offset 0x0833 - Read MPR Training |
| Enables/Disable Read MPR Training |
| $EN_DIS |
| **/ |
| UINT8 RDMPRT; |
| |
| /** Offset 0x0834 - Receive Enable Training |
| Enables/Disable Receive Enable Training |
| $EN_DIS |
| **/ |
| UINT8 RCVET; |
| |
| /** Offset 0x0835 - Jedec Write Leveling |
| Enables/Disable Jedec Write Leveling |
| $EN_DIS |
| **/ |
| UINT8 JWRL; |
| |
| /** Offset 0x0836 - Early Write Time Centering 2D |
| Enables/Disable Early Write Time Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 EWRTC2D; |
| |
| /** Offset 0x0837 - Early Read Time Centering 2D |
| Enables/Disable Early Read Time Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 ERDTC2D; |
| |
| /** Offset 0x0838 - Write Timing Centering 1D |
| Enables/Disable Write Timing Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 WRTC1D; |
| |
| /** Offset 0x0839 - Write Voltage Centering 1D |
| Enables/Disable Write Voltage Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 WRVC1D; |
| |
| /** Offset 0x083A - Read Timing Centering 1D |
| Enables/Disable Read Timing Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 RDTC1D; |
| |
| /** Offset 0x083B - Dimm ODT Training |
| Enables/Disable Dimm ODT Training |
| $EN_DIS |
| **/ |
| UINT8 DIMMODTT; |
| |
| /** Offset 0x083C - DIMM RON Training |
| Enables/Disable DIMM RON Training |
| $EN_DIS |
| **/ |
| UINT8 DIMMRONT; |
| |
| /** Offset 0x083D - Write Drive Strength/Equalization 2D |
| Enables/Disable Write Drive Strength/Equalization 2D |
| $EN_DIS |
| **/ |
| UINT8 WRDSEQT; |
| |
| /** Offset 0x083E - Write Slew Rate Training |
| Enables/Disable Write Slew Rate Training |
| $EN_DIS |
| **/ |
| UINT8 WRSRT; |
| |
| /** Offset 0x083F - Read ODT Training |
| Enables/Disable Read ODT Training |
| $EN_DIS |
| **/ |
| UINT8 RDODTT; |
| |
| /** Offset 0x0840 - Read Equalization Training |
| Enables/Disable Read Equalization Training |
| $EN_DIS |
| **/ |
| UINT8 RDEQT; |
| |
| /** Offset 0x0841 - Read Amplifier Training |
| Enables/Disable Read Amplifier Training |
| $EN_DIS |
| **/ |
| UINT8 RDAPT; |
| |
| /** Offset 0x0842 - Write Timing Centering 2D |
| Enables/Disable Write Timing Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 WRTC2D; |
| |
| /** Offset 0x0843 - Read Timing Centering 2D |
| Enables/Disable Read Timing Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 RDTC2D; |
| |
| /** Offset 0x0844 - Write Voltage Centering 2D |
| Enables/Disable Write Voltage Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 WRVC2D; |
| |
| /** Offset 0x0845 - Read Voltage Centering 2D |
| Enables/Disable Read Voltage Centering 2D |
| $EN_DIS |
| **/ |
| UINT8 RDVC2D; |
| |
| /** Offset 0x0846 - Command Voltage Centering |
| Enables/Disable Command Voltage Centering |
| $EN_DIS |
| **/ |
| UINT8 CMDVC; |
| |
| /** Offset 0x0847 - Late Command Training |
| Enables/Disable Late Command Training |
| $EN_DIS |
| **/ |
| UINT8 LCT; |
| |
| /** Offset 0x0848 - Round Trip Latency Training |
| Enables/Disable Round Trip Latency Training |
| $EN_DIS |
| **/ |
| UINT8 RTL; |
| |
| /** Offset 0x0849 - Turn Around Timing Training |
| Enables/Disable Turn Around Timing Training |
| $EN_DIS |
| **/ |
| UINT8 TAT; |
| |
| /** Offset 0x084A - Memory Test |
| Enables/Disable Memory Test |
| $EN_DIS |
| **/ |
| UINT8 MEMTST; |
| |
| /** Offset 0x084B - DIMM SPD Alias Test |
| Enables/Disable DIMM SPD Alias Test |
| $EN_DIS |
| **/ |
| UINT8 ALIASCHK; |
| |
| /** Offset 0x084C - Receive Enable Centering 1D |
| Enables/Disable Receive Enable Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 RCVENC1D; |
| |
| /** Offset 0x084D - Retrain Margin Check |
| Enables/Disable Retrain Margin Check |
| $EN_DIS |
| **/ |
| UINT8 RMC; |
| |
| /** Offset 0x084E - Write Drive Strength Up/Dn independently |
| Enables/Disable Write Drive Strength Up/Dn independently |
| $EN_DIS |
| **/ |
| UINT8 WRDSUDT; |
| |
| /** Offset 0x084F - ECC Support |
| Enables/Disable ECC Support |
| $EN_DIS |
| **/ |
| UINT8 EccSupport; |
| |
| /** Offset 0x0850 - Memory Remap |
| Enables/Disable Memory Remap |
| $EN_DIS |
| **/ |
| UINT8 RemapEnable; |
| |
| /** Offset 0x0851 - Rank Interleave support |
| Enables/Disable Rank Interleave support. NOTE: RI and HORI can not be enabled at |
| the same time. |
| $EN_DIS |
| **/ |
| UINT8 RankInterleave; |
| |
| /** Offset 0x0852 - Enhanced Interleave support |
| Enables/Disable Enhanced Interleave support |
| $EN_DIS |
| **/ |
| UINT8 EnhancedInterleave; |
| |
| /** Offset 0x0853 - Ch Hash Support |
| Enable/Disable Channel Hash Support. NOTE: ONLY if Memory interleaved Mode |
| $EN_DIS |
| **/ |
| UINT8 ChHashEnable; |
| |
| /** Offset 0x0854 - Reserved |
| **/ |
| UINT8 Reserved93; |
| |
| /** Offset 0x0855 - Extern Therm Status |
| Enables/Disable Extern Therm Status |
| $EN_DIS |
| **/ |
| UINT8 EnableExtts; |
| |
| /** Offset 0x0856 - DDR PowerDown and idle counter |
| Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) |
| $EN_DIS |
| **/ |
| UINT8 EnablePwrDn; |
| |
| /** Offset 0x0857 - DDR PowerDown and idle counter |
| Enables/Disable DDR PowerDown and idle counter(For LPDDR Only) |
| $EN_DIS |
| **/ |
| UINT8 EnablePwrDnLpddr; |
| |
| /** Offset 0x0858 - SelfRefresh Enable |
| Enables/Disable SelfRefresh Enable |
| $EN_DIS |
| **/ |
| UINT8 SrefCfgEna; |
| |
| /** Offset 0x0859 - Throttler CKEMin Defeature |
| Enables/Disable Throttler CKEMin Defeature(For LPDDR Only) |
| $EN_DIS |
| **/ |
| UINT8 ThrtCkeMinDefeatLpddr; |
| |
| /** Offset 0x085A - Throttler CKEMin Defeature |
| Enables/Disable Throttler CKEMin Defeature |
| $EN_DIS |
| **/ |
| UINT8 ThrtCkeMinDefeat; |
| |
| /** Offset 0x085B - Reserved |
| **/ |
| UINT8 Reserved94; |
| |
| /** Offset 0x085C - Exit On Failure (MRC) |
| Enables/Disable Exit On Failure (MRC) |
| $EN_DIS |
| **/ |
| UINT8 ExitOnFailure; |
| |
| /** Offset 0x085D - New Features 1 - MRC |
| New Feature Enabling 1, <b>0:Disable</b>, 1:Enable |
| 0:Disable, 1:Enable |
| **/ |
| UINT8 NewFeatureEnable1; |
| |
| /** Offset 0x085E - New Features 2 - MRC |
| New Feature Enabling 2, <b>0:Disable</b>, 1:Enable |
| 0:Disable, 1:Enable |
| **/ |
| UINT8 NewFeatureEnable2; |
| |
| /** Offset 0x085F - Duty Cycle Correction Training |
| Enable/Disable Duty Cycle Correction Training |
| $EN_DIS |
| **/ |
| UINT8 DCC; |
| |
| /** Offset 0x0860 - Read Voltage Centering 1D |
| Enable/Disable Read Voltage Centering 1D |
| $EN_DIS |
| **/ |
| UINT8 RDVC1D; |
| |
| /** Offset 0x0861 - TxDqTCO Comp Training |
| Enable/Disable TxDqTCO Comp Training |
| $EN_DIS |
| **/ |
| UINT8 TXTCO; |
| |
| /** Offset 0x0862 - ClkTCO Comp Training |
| Enable/Disable ClkTCO Comp Training |
| $EN_DIS |
| **/ |
| UINT8 CLKTCO; |
| |
| /** Offset 0x0863 - CMD Slew Rate Training |
| Enable/Disable CMD Slew Rate Training |
| $EN_DIS |
| **/ |
| UINT8 CMDSR; |
| |
| /** Offset 0x0864 - CMD Drive Strength and Tx Equalization |
| Enable/Disable CMD Drive Strength and Tx Equalization |
| $EN_DIS |
| **/ |
| UINT8 CMDDSEQ; |
| |
| /** Offset 0x0865 - DIMM CA ODT Training |
| Enable/Disable DIMM CA ODT Training |
| $EN_DIS |
| **/ |
| UINT8 DIMMODTCA; |
| |
| /** Offset 0x0866 - TxDqsTCO Comp Training |
| Enable/Disable TxDqsTCO Comp Training |
| $EN_DIS |
| **/ |
| UINT8 TXTCODQS; |
| |
| /** Offset 0x0867 - CMD/CTL Drive Strength Up/Dn 2D |
| Enable/Disable CMD/CTL Drive Strength Up/Dn 2D |
| $EN_DIS |
| **/ |
| UINT8 CMDDRUD; |
| |
| /** Offset 0x0868 - VccDLL Bypass Training |
| Enable/Disable VccDLL Bypass Training |
| $EN_DIS |
| **/ |
| UINT8 VCCDLLBP; |
| |
| /** Offset 0x0869 - PanicVttDnLp Training |
| Enable/Disable PanicVttDnLp Training |
| $EN_DIS |
| **/ |
| UINT8 PVTTDNLP; |
| |
| /** Offset 0x086A - Read Vref Decap Training* |
| Enable/Disable Read Vref Decap Training* |
| $EN_DIS |
| **/ |
| UINT8 RDVREFDC; |
| |
| /** Offset 0x086B - Vddq Training |
| Enable/Disable Vddq Training |
| $EN_DIS |
| **/ |
| UINT8 VDDQT; |
| |
| /** Offset 0x086C - Rank Margin Tool Per Bit |
| Enable/Disable Rank Margin Tool Per Bit |
| $EN_DIS |
| **/ |
| UINT8 RMTBIT; |
| |
| /** Offset 0x086D - Reserved |
| **/ |
| UINT8 Reserved95; |
| |
| /** Offset 0x086E - Reserved |
| **/ |
| UINT8 Reserved96; |
| |
| /** Offset 0x086F - Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP |
| Select if CLK0 is shared between Rank0 and Rank1 in DDR4 DDP |
| $EN_DIS |
| **/ |
| UINT8 Ddr4DdpSharedClock; |
| |
| /** Offset 0x0870 - Select if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP |
| ESelect if ZQ pin is shared between Rank0 and Rank1 in DDR4 DDP |
| $EN_DIS |
| **/ |
| UINT8 Ddr4DdpSharedZq; |
| |
| /** Offset 0x0871 - Ch Hash Interleaved Bit |
| Select the BIT to be used for Channel Interleaved mode. NOTE: BIT7 will interlave |
| the channels at a 2 cacheline granularity, BIT8 at 4 and BIT9 at 8. Default is BIT8 |
| 0:BIT6, 1:BIT7, 2:BIT8, 3:BIT9, 4:BIT10, 5:BIT11, 6:BIT12, 7:BIT13 |
| **/ |
| UINT8 ChHashInterleaveBit; |
| |
| /** Offset 0x0872 - Ch Hash Mask |
| Set the BIT(s) to be included in the XOR function. NOTE BIT mask corresponds to |
| BITS [19:6] Default is 0x30CC |
| **/ |
| UINT16 ChHashMask; |
| |
| /** Offset 0x0874 - Base reference clock value |
| Base reference clock value, in Hertz(Default is 100Hz) |
| 100000000:100Hz, 125000000:125Hz, 167000000:167Hz, 250000000:250Hz |
| **/ |
| UINT32 BClkFrequency; |
| |
| /** Offset 0x0878 - EPG DIMM Idd3N |
| Active standby current (Idd3N) in milliamps from datasheet. Must be calculated on |
| a per DIMM basis. Default is 26 |
| **/ |
| UINT16 Idd3n; |
| |
| /** Offset 0x087A - EPG DIMM Idd3P |
| Active power-down current (Idd3P) in milliamps from datasheet. Must be calculated |
| on a per DIMM basis. Default is 11 |
| **/ |
| UINT16 Idd3p; |
| |
| /** Offset 0x087C - CMD Normalization |
| Enable/Disable CMD Normalization |
| $EN_DIS |
| **/ |
| UINT8 CMDNORM; |
| |
| /** Offset 0x087D - Early DQ Write Drive Strength and Equalization Training |
| Enable/Disable Early DQ Write Drive Strength and Equalization Training |
| $EN_DIS |
| **/ |
| UINT8 EWRDSEQ; |
| |
| /** Offset 0x087E - Reserved |
| **/ |
| UINT8 Reserved97; |
| |
| /** Offset 0x087F - Idle Energy Mc0Ch0Dimm0 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc0Ch0Dimm0; |
| |
| /** Offset 0x0880 - Idle Energy Mc0Ch0Dimm1 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc0Ch0Dimm1; |
| |
| /** Offset 0x0881 - Idle Energy Mc0Ch1Dimm0 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc0Ch1Dimm0; |
| |
| /** Offset 0x0882 - Idle Energy Mc0Ch1Dimm1 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc0Ch1Dimm1; |
| |
| /** Offset 0x0883 - Idle Energy Mc1Ch0Dimm0 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc1Ch0Dimm0; |
| |
| /** Offset 0x0884 - Idle Energy Mc1Ch0Dimm1 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc1Ch0Dimm1; |
| |
| /** Offset 0x0885 - Idle Energy Mc1Ch1Dimm0 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc1Ch1Dimm0; |
| |
| /** Offset 0x0886 - Idle Energy Mc1Ch1Dimm1 |
| Idle Energy Consumed for 1 clk w/dimm idle/cke on, range[63;0],(10= Def) |
| **/ |
| UINT8 IdleEnergyMc1Ch1Dimm1; |
| |
| /** Offset 0x0887 - PowerDown Energy Mc0Ch0Dimm0 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc0Ch0Dimm0; |
| |
| /** Offset 0x0888 - PowerDown Energy Mc0Ch0Dimm1 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc0Ch0Dimm1; |
| |
| /** Offset 0x0889 - PowerDown Energy Mc0Ch1Dimm0 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc0Ch1Dimm0; |
| |
| /** Offset 0x088A - PowerDown Energy Mc0Ch1Dimm1 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc0Ch1Dimm1; |
| |
| /** Offset 0x088B - PowerDown Energy Mc1Ch0Dimm0 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc1Ch0Dimm0; |
| |
| /** Offset 0x088C - PowerDown Energy Mc1Ch0Dimm1 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc1Ch0Dimm1; |
| |
| /** Offset 0x088D - PowerDown Energy Mc1Ch1Dimm0 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc1Ch1Dimm0; |
| |
| /** Offset 0x088E - PowerDown Energy Mc1Ch1Dimm1 |
| PowerDown Energy Consumed w/dimm idle/cke off, range[63;0],(6= Def) |
| **/ |
| UINT8 PdEnergyMc1Ch1Dimm1; |
| |
| /** Offset 0x088F - Activate Energy Mc0Ch0Dimm0 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc0Ch0Dimm0; |
| |
| /** Offset 0x0890 - Activate Energy Mc0Ch0Dimm1 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc0Ch0Dimm1; |
| |
| /** Offset 0x0891 - Activate Energy Mc0Ch1Dimm0 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc0Ch1Dimm0; |
| |
| /** Offset 0x0892 - Activate Energy Mc0Ch1Dimm1 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc0Ch1Dimm1; |
| |
| /** Offset 0x0893 - Activate Energy Mc1Ch0Dimm0 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc1Ch0Dimm0; |
| |
| /** Offset 0x0894 - Activate Energy Mc1Ch0Dimm1 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc1Ch0Dimm1; |
| |
| /** Offset 0x0895 - Activate Energy Mc1Ch1Dimm0 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc1Ch1Dimm0; |
| |
| /** Offset 0x0896 - Activate Energy Mc1Ch1Dimm1 |
| Activate Energy Contribution, range[255;0],(172= Def) |
| **/ |
| UINT8 ActEnergyMc1Ch1Dimm1; |
| |
| /** Offset 0x0897 - Read Energy Mc0Ch0Dimm0 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc0Ch0Dimm0; |
| |
| /** Offset 0x0898 - Read Energy Mc0Ch0Dimm1 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc0Ch0Dimm1; |
| |
| /** Offset 0x0899 - Read Energy Mc0Ch1Dimm0 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc0Ch1Dimm0; |
| |
| /** Offset 0x089A - Read Energy Mc0Ch1Dimm1 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc0Ch1Dimm1; |
| |
| /** Offset 0x089B - Read Energy Mc1Ch0Dimm0 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc1Ch0Dimm0; |
| |
| /** Offset 0x089C - Read Energy Mc1Ch0Dimm1 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc1Ch0Dimm1; |
| |
| /** Offset 0x089D - Read Energy Mc1Ch1Dimm0 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc1Ch1Dimm0; |
| |
| /** Offset 0x089E - Read Energy Mc1Ch1Dimm1 |
| Read Energy Contribution, range[255;0],(212= Def) |
| **/ |
| UINT8 RdEnergyMc1Ch1Dimm1; |
| |
| /** Offset 0x089F - Write Energy Mc0Ch0Dimm0 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc0Ch0Dimm0; |
| |
| /** Offset 0x08A0 - Write Energy Mc0Ch0Dimm1 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc0Ch0Dimm1; |
| |
| /** Offset 0x08A1 - Write Energy Mc0Ch1Dimm0 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc0Ch1Dimm0; |
| |
| /** Offset 0x08A2 - Write Energy Mc0Ch1Dimm1 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc0Ch1Dimm1; |
| |
| /** Offset 0x08A3 - Write Energy Mc1Ch0Dimm0 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc1Ch0Dimm0; |
| |
| /** Offset 0x08A4 - Write Energy Mc1Ch0Dimm1 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc1Ch0Dimm1; |
| |
| /** Offset 0x08A5 - Write Energy Mc1Ch1Dimm0 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc1Ch1Dimm0; |
| |
| /** Offset 0x08A6 - Write Energy Mc1Ch1Dimm1 |
| Write Energy Contribution, range[255;0],(221= Def) |
| **/ |
| UINT8 WrEnergyMc1Ch1Dimm1; |
| |
| /** Offset 0x08A7 - Throttler CKEMin Timer |
| Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4). |
| Dfault is 0x00 |
| **/ |
| UINT8 ThrtCkeMinTmr; |
| |
| /** Offset 0x08A8 - Reserved |
| **/ |
| UINT8 Reserved98; |
| |
| /** Offset 0x08A9 - Reserved |
| **/ |
| UINT8 Reserved99; |
| |
| /** Offset 0x08AA - Rapl Power Floor Ch0 |
| Power budget ,range[255;0],(0= 5.3W Def) |
| **/ |
| UINT8 RaplPwrFlCh0; |
| |
| /** Offset 0x08AB - Rapl Power Floor Ch1 |
| Power budget ,range[255;0],(0= 5.3W Def) |
| **/ |
| UINT8 RaplPwrFlCh1; |
| |
| /** Offset 0x08AC - Command Rate Support |
| CMD Rate and Limit Support Option. NOTE: ONLY supported in 1N Mode, Default is 3 CMDs |
| 0:Disable, 5:2 CMDS, 7:3 CMDS, 9:4 CMDS, 11:5 CMDS, 13:6 CMDS, 15:7 CMDS |
| **/ |
| UINT8 EnCmdRate; |
| |
| /** Offset 0x08AD - REFRESH_2X_MODE |
| 0- (Default)Disabled 1-iMC enables 2xRef when Warm and Hot 2- iMC enables 2xRef when Hot |
| 0:Disable, 1:Enabled for WARM or HOT, 2:Enabled HOT only |
| **/ |
| UINT8 Refresh2X; |
| |
| /** Offset 0x08AE - Energy Performance Gain |
| Enable/disable(default) Energy Performance Gain. |
| $EN_DIS |
| **/ |
| UINT8 EpgEnable; |
| |
| /** Offset 0x08AF - Reserved |
| **/ |
| UINT8 Reserved100; |
| |
| /** Offset 0x08B0 - User Manual Threshold |
| Disabled: Predefined threshold will be used.\n |
| Enabled: User Input will be used. |
| $EN_DIS |
| **/ |
| UINT8 UserThresholdEnable; |
| |
| /** Offset 0x08B1 - User Manual Budget |
| Disabled: Configuration of memories will defined the Budget value.\n |
| Enabled: User Input will be used. |
| $EN_DIS |
| **/ |
| UINT8 UserBudgetEnable; |
| |
| /** Offset 0x08B2 - Power Down Mode |
| This option controls command bus tristating during idle periods |
| 0x0:No Power Down, 0x1:APD, 0x6:PPD DLL OFF, 0xFF:Auto |
| **/ |
| UINT8 PowerDownMode; |
| |
| /** Offset 0x08B3 - Pwr Down Idle Timer |
| The minimum value should = to the worst case Roundtrip delay + Burst_Length. 0 means |
| AUTO: 64 for ULX/ULT, 128 for DT/Halo |
| **/ |
| UINT8 PwdwnIdleCounter; |
| |
| /** Offset 0x08B4 - Page Close Idle Timeout |
| This option controls Page Close Idle Timeout |
| 0:Enabled, 1:Disabled |
| **/ |
| UINT8 DisPgCloseIdleTimeout; |
| |
| /** Offset 0x08B5 - Bitmask of ranks that have CA bus terminated |
| Offset 225 LPDDR4: Bitmask of ranks that have CA bus terminated. <b>0x01=Default, |
| Rank0 is terminating and Rank1 is non-terminating</b> |
| **/ |
| UINT8 CmdRanksTerminated; |
| |
| /** Offset 0x08B6 - PcdSerialDebugLevel |
| Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, |
| Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, |
| Info & Verbose. |
| 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load |
| Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose |
| **/ |
| UINT8 PcdSerialDebugLevel; |
| |
| /** Offset 0x08B7 - Safe Mode Support |
| This option configures the varous items in the IO and MC to be more conservative.(def=Disable) |
| $EN_DIS |
| **/ |
| UINT8 SafeMode; |
| |
| /** Offset 0x08B8 - Ask MRC to clear memory content |
| Ask MRC to clear memory content <b>0: Do not Clear Memory;</b> 1: Clear Memory. |
| $EN_DIS |
| **/ |
| UINT8 CleanMemory; |
| |
| /** Offset 0x08B9 - LpDdrDqDqsReTraining |
| Enable/Disable TxDqDqs ReTraining for LP4/5 and DDR5 |
| $EN_DIS |
| **/ |
| UINT8 LpDdrDqDqsReTraining; |
| |
| /** Offset 0x08BA - TCSS USB Port Enable |
| Bitmap for per port enabling |
| **/ |
| UINT8 UsbTcPortEnPreMem; |
| |
| /** Offset 0x08BB - Reserved |
| **/ |
| UINT8 Reserved101; |
| |
| /** Offset 0x08BC - Post Code Output Port |
| This option configures Post Code Output Port |
| **/ |
| UINT16 PostCodeOutputPort; |
| |
| /** Offset 0x08BE - RMTLoopCount |
| Specifies the Loop Count to be used during Rank Margin Tool Testing. 0 - AUTO |
| **/ |
| UINT8 RMTLoopCount; |
| |
| /** Offset 0x08BF - Enable/Disable SA CRID |
| Enable: SA CRID, Disable (Default): SA CRID |
| $EN_DIS |
| **/ |
| UINT8 CridEnable; |
| |
| /** Offset 0x08C0 - WRC Feature |
| Enable/Disable WRC (Write Cache) feature of IOP. When feature is enabled, supports |
| IO devices allocating onto the ring and into LLC. WRC is fused on by default. |
| $EN_DIS |
| **/ |
| UINT8 WrcFeatureEnable; |
| |
| /** Offset 0x08C1 - Reserved |
| **/ |
| UINT8 Reserved102[3]; |
| |
| /** Offset 0x08C4 - BCLK RFI Frequency |
| Bclk RFI Frequency for each SAGV point in Hz units. 98000000Hz = 98MHz <b>0 - No |
| RFI Tuning</b>. Range is 98Mhz-100Mhz. |
| **/ |
| UINT32 BclkRfiFreq[4]; |
| |
| /** Offset 0x08D4 - Size of PCIe IMR. |
| Size of PCIe IMR in megabytes |
| **/ |
| UINT16 PcieImrSize; |
| |
| /** Offset 0x08D6 - Enable PCIe IMR |
| 0: Disable(AUTO), 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 PcieImrEnabled; |
| |
| /** Offset 0x08D7 - Enable PCIe IMR |
| 1: PCH PCIE, 2: SA PCIE. If PCIeImrEnabled is TRUE then this will use to select |
| the Root port location from PCH PCIe or SA PCIe |
| $EN_DIS |
| **/ |
| UINT8 PcieImrRpLocation; |
| |
| /** Offset 0x08D8 - Root port number for IMR. |
| Root port number for IMR.If PCieImrRpLocation is PCH PCIe then select root port |
| from 0 to 23 and if it is SA PCIe then select root port from 0 to 3 |
| **/ |
| UINT8 PcieImrRpSelection; |
| |
| /** Offset 0x08D9 - SerialDebugMrcLevel |
| MRC Serial Debug Message Level. 0:Disable, 1:Error Only, 2:Error & Warnings, 3:Load, |
| Error, Warnings & Info, 4:Load, Error, Warnings, Info & Event, 5:Load, Error, Warnings, |
| Info & Verbose. |
| 0:Disable, 1:Error Only, 2:Error and Warnings, 3:Load Error Warnings and Info, 4:Load |
| Error Warnings and Info & Event, 5:Load Error Warnings Info and Verbose |
| **/ |
| UINT8 SerialDebugMrcLevel; |
| |
| /** Offset 0x08DA - Ddr4OneDpc |
| DDR4 1DPC performance feature for 2R DIMMs. Can be enabled on DIMM0 or DIMM1 only, |
| or on both (default) |
| 0: Disabled, 1: Enabled on DIMM0 only, 2: Enabled on DIMM1 only, 3: Enabled |
| **/ |
| UINT8 Ddr4OneDpc; |
| |
| /** Offset 0x08DB - Reserved |
| **/ |
| UINT8 Reserved103; |
| |
| /** Offset 0x08DC - Reserved |
| **/ |
| UINT8 Reserved104; |
| |
| /** Offset 0x08DD - Reserved |
| **/ |
| UINT8 Reserved105; |
| |
| /** Offset 0x08DE - REFRESH_PANIC_WM |
| DEPRECATED |
| **/ |
| UINT8 RefreshPanicWm; |
| |
| /** Offset 0x08DF - REFRESH_HP_WM |
| DEPRECATED |
| **/ |
| UINT8 RefreshHpWm; |
| |
| /** Offset 0x08E0 - Command Pins Mapping |
| BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller |
| 1 Channel [3:0]. 0 = CCC pin mapping is Ascending, 1 = CCC pin mapping is Descending. |
| **/ |
| UINT8 Lp5CccConfig; |
| |
| /** Offset 0x08E1 - Command Pins Mirrored |
| BitMask where bits [3:0] are Controller 0 Channel [3:0] and bits [7:4] are Controller |
| 1 Channel [3:0]. 0 = No Command Mirror and 1 = Command Mirror. |
| **/ |
| UINT8 CmdMirror; |
| |
| /** Offset 0x08E2 - Reserved |
| **/ |
| UINT8 Reserved106; |
| |
| /** Offset 0x08E3 - Reserved |
| **/ |
| UINT8 Reserved107; |
| |
| /** Offset 0x08E4 - Reserved |
| **/ |
| UINT8 Reserved108; |
| |
| /** Offset 0x08E5 - Reserved |
| **/ |
| UINT8 Reserved109; |
| |
| /** Offset 0x08E6 - Reserved |
| **/ |
| UINT8 Reserved110; |
| |
| /** Offset 0x08E7 - Reserved |
| **/ |
| UINT8 Reserved111; |
| |
| /** Offset 0x08E8 - Reserved |
| **/ |
| UINT8 Reserved112; |
| |
| /** Offset 0x08E9 - Reserved |
| **/ |
| UINT8 Reserved113; |
| |
| /** Offset 0x08EA - Reserved |
| **/ |
| UINT8 Reserved114; |
| |
| /** Offset 0x08EB - Skip external display device scanning |
| Enable: Do not scan for external display device, Disable (Default): Scan external |
| display devices |
| $EN_DIS |
| **/ |
| UINT8 SkipExtGfxScan; |
| |
| /** Offset 0x08EC - Generate BIOS Data ACPI Table |
| Enable: Generate BDAT for MRC RMT or SA PCIe data. Disable (Default): Do not generate it |
| $EN_DIS |
| **/ |
| UINT8 BdatEnable; |
| |
| /** Offset 0x08ED - Lock PCU Thermal Management registers |
| Lock PCU Thermal Management registers. Enable(Default)=1, Disable=0 |
| $EN_DIS |
| **/ |
| UINT8 LockPTMregs; |
| |
| /** Offset 0x08EE - Reserved |
| **/ |
| UINT8 Reserved115; |
| |
| /** Offset 0x08EF - Panel Power Enable |
| Control for enabling/disabling VDD force bit (Required only for early enabling of |
| eDP panel). 0=Disable, 1(Default)=Enable |
| $EN_DIS |
| **/ |
| UINT8 PanelPowerEnable; |
| |
| /** Offset 0x08F0 - BdatTestType |
| Indicates the type of Memory Training data to populate into the BDAT ACPI table. |
| 0:RMT per Rank, 1:RMT per Bit, 2:Margin2D |
| **/ |
| UINT8 BdatTestType; |
| |
| /** Offset 0x08F1 - Reserved |
| **/ |
| UINT8 Reserved116[3]; |
| |
| /** Offset 0x08F4 - PMR Size |
| Size of PMR memory buffer. 0x400000 for normal boot and 0x200000 for S3 boot |
| **/ |
| UINT32 DmaBufferSize; |
| |
| /** Offset 0x08F8 - VT-d/IOMMU Boot Policy |
| BIT0: Enable IOMMU during boot, BIT1: Enable IOMMU when transfer control to OS |
| **/ |
| UINT8 PreBootDmaMask; |
| |
| /** Offset 0x08F9 - Reserved |
| **/ |
| UINT8 Reserved117; |
| |
| /** Offset 0x08FA - Reserved |
| **/ |
| UINT16 Reserved118; |
| |
| /** Offset 0x08FC - Reserved |
| **/ |
| UINT8 Reserved119; |
| |
| /** Offset 0x08FD - Reserved |
| **/ |
| UINT8 Reserved120; |
| |
| /** Offset 0x08FE - Reserved |
| **/ |
| UINT8 Reserved121; |
| |
| /** Offset 0x08FF - Reserved |
| **/ |
| UINT8 Reserved122[88]; |
| |
| /** Offset 0x0957 - Reserved |
| **/ |
| UINT8 Reserved123; |
| |
| /** Offset 0x0958 - TotalFlashSize |
| Enable/Disable. 0: Disable, define default value of TotalFlashSize , 1: enable |
| **/ |
| UINT16 TotalFlashSize; |
| |
| /** Offset 0x095A - BiosSize |
| The size of the BIOS region of the IFWI. Used if FspmUpd->FspmConfig.BiosGuard != |
| 0. If BiosGuard is enabled, MRC will increase the size of the DPR (DMA Protected |
| Range) so that a BIOS Update Script can be stored in the DPR. |
| **/ |
| UINT16 BiosSize; |
| |
| /** Offset 0x095C - Reserved |
| **/ |
| UINT8 Reserved124[12]; |
| |
| /** Offset 0x0968 - Smbus dynamic power gating |
| Disable or Enable Smbus dynamic power gating. |
| $EN_DIS |
| **/ |
| UINT8 SmbusDynamicPowerGating; |
| |
| /** Offset 0x0969 - Disable and Lock Watch Dog Register |
| Set 1 to clear WDT status, then disable and lock WDT registers. |
| $EN_DIS |
| **/ |
| UINT8 WdtDisableAndLock; |
| |
| /** Offset 0x096A - SMBUS SPD Write Disable |
| Set/Clear Smbus SPD Write Disable. 0: leave SPD Write Disable bit; 1: set SPD Write |
| Disable bit. For security recommendations, SPD write disable bit must be set. |
| $EN_DIS |
| **/ |
| UINT8 SmbusSpdWriteDisable; |
| |
| /** Offset 0x096B - Force ME DID Init Status |
| Test, 0: disable, 1: Success, 2: No Memory in Channels, 3: Memory Init Error, Set |
| ME DID init stat value |
| $EN_DIS |
| **/ |
| UINT8 DidInitStat; |
| |
| /** Offset 0x096C - CPU Replaced Polling Disable |
| Test, 0: disable, 1: enable, Setting this option disables CPU replacement polling loop |
| $EN_DIS |
| **/ |
| UINT8 DisableCpuReplacedPolling; |
| |
| /** Offset 0x096D - Check HECI message before send |
| Test, 0: disable, 1: enable, Enable/Disable message check. |
| $EN_DIS |
| **/ |
| UINT8 DisableMessageCheck; |
| |
| /** Offset 0x096E - Skip MBP HOB |
| Test, 0: disable, 1: enable, Enable/Disable MOB HOB. |
| $EN_DIS |
| **/ |
| UINT8 SkipMbpHob; |
| |
| /** Offset 0x096F - HECI2 Interface Communication |
| Test, 0: disable, 1: enable, Adds or Removes HECI2 Device from PCI space. |
| $EN_DIS |
| **/ |
| UINT8 HeciCommunication2; |
| |
| /** Offset 0x0970 - Enable KT device |
| Test, 0: disable, 1: enable, Enable or Disable KT device. |
| $EN_DIS |
| **/ |
| UINT8 KtDeviceEnable; |
| |
| /** Offset 0x0971 - Skip CPU replacement check |
| Test, 0: disable, 1: enable, Setting this option to skip CPU replacement check |
| $EN_DIS |
| **/ |
| UINT8 SkipCpuReplacementCheck; |
| |
| /** Offset 0x0972 - Reserved |
| **/ |
| UINT8 Reserved125[2]; |
| |
| /** Offset 0x0974 - Hybrid Graphics GPIO information for PEG 1 |
| Hybrid Graphics GPIO information for PEG 1, for Reset, power and wake GPIOs |
| **/ |
| UINT32 CpuPcie1Rtd3Gpio[24]; |
| |
| /** Offset 0x09D4 - Hybrid Graphics GPIO information for PEG 2 |
| Hybrid Graphics GPIO information for PEG 2, for Reset, power and wake GPIOs |
| **/ |
| UINT32 CpuPcie2Rtd3Gpio[24]; |
| |
| /** Offset 0x0A34 - Hybrid Graphics GPIO information for PEG 3 |
| Hybrid Graphics GPIO information for PEG 3, for Reset, power and wake GPIOs |
| **/ |
| UINT32 CpuPcie3Rtd3Gpio[24]; |
| |
| /** Offset 0x0A94 - Avx2 Voltage Guardband Scaling Factor |
| AVX2 Voltage Guardband Scale factor applied to AVX2 workloads. Range is 0-200 in |
| 1/100 units, where a value of 125 would apply a 1.25 scale factor. |
| **/ |
| UINT8 Avx2VoltageScaleFactor; |
| |
| /** Offset 0x0A95 - Avx512 Voltage Guardband Scaling Factor |
| DEPRECATED |
| **/ |
| UINT8 Avx512VoltageScaleFactor; |
| |
| /** Offset 0x0A96 - Serial Io Uart Debug Mode |
| Select SerialIo Uart Controller mode |
| 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, |
| 4:SerialIoUartSkipInit |
| **/ |
| UINT8 SerialIoUartDebugMode; |
| |
| /** Offset 0x0A97 - Reserved |
| **/ |
| UINT8 Reserved126; |
| |
| /** Offset 0x0A98 - SerialIoUartDebugRxPinMux - FSPT |
| Select RX pin muxing for SerialIo UART used for debug |
| **/ |
| UINT32 SerialIoUartDebugRxPinMux; |
| |
| /** Offset 0x0A9C - SerialIoUartDebugTxPinMux - FSPM |
| Select TX pin muxing for SerialIo UART used for debug |
| **/ |
| UINT32 SerialIoUartDebugTxPinMux; |
| |
| /** Offset 0x0AA0 - SerialIoUartDebugRtsPinMux - FSPM |
| Select SerialIo Uart used for debug Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* |
| for possible values. |
| **/ |
| UINT32 SerialIoUartDebugRtsPinMux; |
| |
| /** Offset 0x0AA4 - SerialIoUartDebugCtsPinMux - FSPM |
| Select SerialIo Uart used for debug Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* |
| for possible values. |
| **/ |
| UINT32 SerialIoUartDebugCtsPinMux; |
| |
| /** Offset 0x0AA8 - Reserved |
| **/ |
| UINT8 Reserved127; |
| |
| /** Offset 0x0AA9 - Reserved |
| **/ |
| UINT8 Reserved128; |
| |
| /** Offset 0x0AAA - Reserved |
| **/ |
| UINT16 Reserved129; |
| |
| /** Offset 0x0AAC - Reserved |
| **/ |
| UINT8 Reserved130[4]; |
| |
| /** Offset 0x0AB0 - Reserved |
| **/ |
| UINT8 Reserved131; |
| |
| /** Offset 0x0AB1 - Reserved |
| **/ |
| UINT8 Reserved132; |
| |
| /** Offset 0x0AB2 - Reserved |
| **/ |
| UINT8 Reserved133[6]; |
| |
| /** Offset 0x0AB8 - Reserved |
| **/ |
| UINT64 Reserved134; |
| |
| /** Offset 0x0AC0 - Reserved |
| **/ |
| UINT64 Reserved135; |
| |
| /** Offset 0x0AC8 - Reserved |
| **/ |
| UINT32 Reserved136; |
| |
| /** Offset 0x0ACC - Reserved |
| **/ |
| UINT8 Reserved137[8]; |
| |
| /** Offset 0x0AD4 - Reserved |
| **/ |
| UINT8 Reserved138; |
| |
| /** Offset 0x0AD5 - Reserved |
| **/ |
| UINT8 Reserved139[3]; |
| |
| /** Offset 0x0AD8 - Reserved |
| **/ |
| UINT32 Reserved140; |
| |
| /** Offset 0x0ADC - Reserved |
| **/ |
| UINT32 Reserved141; |
| |
| /** Offset 0x0AE0 - Reserved |
| **/ |
| UINT16 Reserved142; |
| |
| /** Offset 0x0AE2 - Reserved |
| **/ |
| UINT16 Reserved143; |
| |
| /** Offset 0x0AE4 - Reserved |
| **/ |
| UINT16 Reserved144; |
| |
| /** Offset 0x0AE6 - Reserved |
| **/ |
| UINT8 Reserved145; |
| |
| /** Offset 0x0AE7 - Reserved |
| **/ |
| UINT8 Reserved146; |
| |
| /** Offset 0x0AE8 - Reserved |
| **/ |
| UINT8 Reserved147; |
| |
| /** Offset 0x0AE9 - Reserved |
| **/ |
| UINT8 Reserved148; |
| |
| /** Offset 0x0AEA - Reserved |
| **/ |
| UINT8 Reserved149; |
| |
| /** Offset 0x0AEB - Reserved |
| **/ |
| UINT8 Reserved150[5]; |
| |
| /** Offset 0x0AF0 - Reserved |
| **/ |
| UINT64 Reserved151; |
| |
| /** Offset 0x0AF8 - Reserved |
| **/ |
| UINT64 Reserved152; |
| |
| /** Offset 0x0B00 - Reserved |
| **/ |
| UINT32 Reserved153; |
| |
| /** Offset 0x0B04 - Reserved |
| **/ |
| UINT16 Reserved154; |
| |
| /** Offset 0x0B06 - Reserved |
| **/ |
| UINT8 Reserved155; |
| |
| /** Offset 0x0B07 - Reserved |
| **/ |
| UINT8 Reserved156; |
| |
| /** Offset 0x0B08 - Reserved |
| **/ |
| UINT8 Reserved157; |
| |
| /** Offset 0x0B09 - Reserved |
| **/ |
| UINT8 Reserved158; |
| |
| /** Offset 0x0B0A - Reserved |
| **/ |
| UINT8 Reserved159; |
| |
| /** Offset 0x0B0B - Reserved |
| **/ |
| UINT8 Reserved160; |
| |
| /** Offset 0x0B0C - Reserved |
| **/ |
| UINT8 Reserved161; |
| |
| /** Offset 0x0B0D - Reserved |
| **/ |
| UINT8 Reserved162; |
| |
| /** Offset 0x0B0E - Reserved |
| **/ |
| UINT16 Reserved163; |
| |
| /** Offset 0x0B10 - Reserved |
| **/ |
| UINT16 Reserved164; |
| |
| /** Offset 0x0B12 - Reserved |
| **/ |
| UINT16 Reserved165; |
| |
| /** Offset 0x0B14 - Reserved |
| **/ |
| UINT16 Reserved166; |
| |
| /** Offset 0x0B16 - Reserved |
| **/ |
| UINT8 Reserved167[8]; |
| |
| /** Offset 0x0B1E - Reserved |
| **/ |
| UINT8 Reserved168[8]; |
| |
| /** Offset 0x0B26 - Reserved |
| **/ |
| UINT16 Reserved169; |
| |
| /** Offset 0x0B28 - Reserved |
| **/ |
| UINT8 Reserved170; |
| |
| /** Offset 0x0B29 - Reserved |
| **/ |
| UINT8 Reserved171; |
| |
| /** Offset 0x0B2A - LP5 Bank Mode |
| LP5 Bank Mode. 0: Auto, 1: 8 Bank Mode, 2: 16 Bank Mode, 3: BG Mode, default is 0 |
| 0:Auto, 1:8 Bank Mode, 2:16 Bank Mode, 3:BG Mode |
| **/ |
| UINT8 Lp5BankMode; |
| |
| /** Offset 0x0B2B - Reserved |
| **/ |
| UINT8 Reserved172; |
| |
| /** Offset 0x0B2C - Reserved |
| **/ |
| UINT8 Reserved173; |
| |
| /** Offset 0x0B2D - Reserved |
| **/ |
| UINT8 Reserved174; |
| |
| /** Offset 0x0B2E - Reserved |
| **/ |
| UINT8 Reserved175; |
| |
| /** Offset 0x0B2F - Reserved |
| **/ |
| UINT8 Reserved176[5]; |
| |
| /** Offset 0x0B34 - Reserved |
| **/ |
| UINT8 Reserved177[4]; |
| } FSP_M_CONFIG; |
| |
| /** Fsp M UPD Configuration |
| **/ |
| typedef struct { |
| |
| /** Offset 0x0000 |
| **/ |
| FSP_UPD_HEADER FspUpdHeader; |
| |
| /** Offset 0x0020 |
| **/ |
| FSPM_ARCH_UPD FspmArchUpd; |
| |
| /** Offset 0x0040 |
| **/ |
| FSP_M_CONFIG FspmConfig; |
| |
| /** Offset 0x0B38 |
| **/ |
| UINT8 Rsvd33[6]; |
| |
| /** Offset 0x0B3E |
| **/ |
| UINT16 UpdTerminator; |
| } FSPM_UPD; |
| |
| #pragma pack() |
| |
| #endif |