| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2000,2007 Ronald G. Minnich <rminnich@gmail.com> |
| * Copyright (C) 2005 Tyan (written by Yinghai Lu for Tyan) |
| * Copyright (C) 2007-2008 coresystems GmbH |
| * Copyright (C) 2012 Kyösti Mälkki <kyosti.malkki@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <cpu/x86/mtrr.h> |
| #include <cpu/x86/cache.h> |
| #include <cpu/x86/post_code.h> |
| |
| #define CACHE_AS_RAM_SIZE CONFIG_DCACHE_RAM_SIZE |
| #define CACHE_AS_RAM_BASE CONFIG_DCACHE_RAM_BASE |
| |
| .code32 |
| _cache_as_ram_setup: |
| |
| /* Save the BIST result. */ |
| movl %eax, %ebp |
| |
| cache_as_ram: |
| post_code(0x20) |
| |
| /* Clear/disable fixed MTRRs */ |
| mov $fixed_mtrr_list_size, %ebx |
| xor %eax, %eax |
| xor %edx, %edx |
| |
| clear_fixed_mtrr: |
| add $-2, %ebx |
| movzwl fixed_mtrr_list(%ebx), %ecx |
| wrmsr |
| jnz clear_fixed_mtrr |
| |
| /* Figure put how many MTRRs we have, and clear them out */ |
| mov $MTRR_CAP_MSR, %ecx |
| rdmsr |
| movzb %al, %ebx /* Number of variable MTRRs */ |
| mov $MTRR_PHYS_BASE(0), %ecx |
| xor %eax, %eax |
| xor %edx, %edx |
| |
| clear_var_mtrr: |
| wrmsr |
| inc %ecx |
| wrmsr |
| inc %ecx |
| dec %ebx |
| jnz clear_var_mtrr |
| post_code(0x21) |
| |
| /* Configure the default memory type to uncacheable. */ |
| movl $MTRR_DEF_TYPE_MSR, %ecx |
| rdmsr |
| andl $(~0x00000cff), %eax |
| wrmsr |
| |
| post_code(0x22) |
| |
| /* Determine CPU_ADDR_BITS and load PHYSMASK high word to %edx. */ |
| movl $1, %eax |
| cpuid |
| andl $(1 << 6 | 1 << 17), %edx /* PAE or PSE36 */ |
| jz addrsize_set_high |
| movl $0x0f, %edx |
| |
| /* Preload high word of address mask (in %edx) for Variable |
| MTRRs 0 and 1. */ |
| addrsize_set_high: |
| xorl %eax, %eax |
| movl $MTRR_PHYS_MASK(0), %ecx |
| wrmsr |
| movl $MTRR_PHYS_MASK(1), %ecx |
| wrmsr |
| |
| post_code(0x2a) |
| |
| /* Set Cache-as-RAM base address. */ |
| movl $(MTRR_PHYS_BASE(0)), %ecx |
| movl $(CACHE_AS_RAM_BASE | MTRR_TYPE_WRBACK), %eax |
| xorl %edx, %edx |
| wrmsr |
| |
| /* Set Cache-as-RAM mask. */ |
| movl $(MTRR_PHYS_MASK(0)), %ecx |
| rdmsr |
| movl $(~(CACHE_AS_RAM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax |
| wrmsr |
| |
| post_code(0x2b) |
| |
| /* Enable MTRR. */ |
| movl $MTRR_DEF_TYPE_MSR, %ecx |
| rdmsr |
| orl $MTRR_DEF_TYPE_EN, %eax |
| wrmsr |
| |
| post_code(0x2c) |
| |
| /* Enable cache (CR0.CD = 0, CR0.NW = 0). */ |
| movl %cr0, %eax |
| andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax |
| invd |
| movl %eax, %cr0 |
| |
| /* Read then clear the CAR region. This will also fill up the cache. |
| * IMPORTANT: The read is mandatory. |
| */ |
| movl $CACHE_AS_RAM_BASE, %esi |
| movl %esi, %edi |
| cld |
| movl $(CACHE_AS_RAM_SIZE >> 2), %ecx |
| rep lodsl |
| movl $(CACHE_AS_RAM_SIZE >> 2), %ecx |
| xorl %eax, %eax |
| rep stosl |
| |
| post_code(0x2d) |
| /* Enable Cache-as-RAM mode by disabling cache. */ |
| movl %cr0, %eax |
| orl $CR0_CacheDisable, %eax |
| movl %eax, %cr0 |
| |
| /* Enable cache for our code in Flash because we do XIP here */ |
| movl $MTRR_PHYS_BASE(1), %ecx |
| xorl %edx, %edx |
| /* |
| * IMPORTANT: The following calculation _must_ be done at runtime. See |
| * https://www.coreboot.org/pipermail/coreboot/2010-October/060855.html |
| */ |
| movl $copy_and_run, %eax |
| andl $(~(CONFIG_XIP_ROM_SIZE - 1)), %eax |
| orl $MTRR_TYPE_WRPROT, %eax |
| wrmsr |
| |
| movl $MTRR_PHYS_MASK(1), %ecx |
| rdmsr |
| movl $(~(CONFIG_XIP_ROM_SIZE - 1) | MTRR_PHYS_MASK_VALID), %eax |
| wrmsr |
| |
| post_code(0x2e) |
| /* Enable cache. */ |
| movl %cr0, %eax |
| andl $(~(CR0_CacheDisable | CR0_NoWriteThrough)), %eax |
| movl %eax, %cr0 |
| |
| /* Setup the stack. */ |
| movl $(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE), %eax |
| movl %eax, %esp |
| |
| /* Restore the BIST result. */ |
| movl %ebp, %eax |
| movl %esp, %ebp |
| pushl %eax |
| |
| before_romstage: |
| post_code(0x2f) |
| /* Call romstage.c main function. */ |
| call romstage_main |
| |
| /* Should never see this postcode */ |
| post_code(POST_DEAD_CODE) |
| |
| .Lhlt: |
| hlt |
| jmp .Lhlt |
| |
| fixed_mtrr_list: |
| .word MTRR_FIX_64K_00000 |
| .word MTRR_FIX_16K_80000 |
| .word MTRR_FIX_16K_A0000 |
| .word MTRR_FIX_4K_C0000 |
| .word MTRR_FIX_4K_C8000 |
| .word MTRR_FIX_4K_D0000 |
| .word MTRR_FIX_4K_D8000 |
| .word MTRR_FIX_4K_E0000 |
| .word MTRR_FIX_4K_E8000 |
| .word MTRR_FIX_4K_F0000 |
| .word MTRR_FIX_4K_F8000 |
| fixed_mtrr_list_size = . - fixed_mtrr_list |
| |
| _cache_as_ram_setup_end: |