| /* SPDX-License-Identifier: GPL-2.0-or-later */ |
| |
| #include <gpio.h> |
| #include <intelblocks/pcr.h> |
| #include <soc/pcr_ids.h> |
| #include <soc/pmc.h> |
| |
| static const struct reset_mapping rst_map[] = { |
| { .logical = PAD_CFG0_LOGICAL_RESET_RSMRST, .chipset = 0U << 30 }, |
| { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 }, |
| { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 }, |
| }; |
| |
| static const struct reset_mapping rst_map_com0[] = { |
| { .logical = PAD_CFG0_LOGICAL_RESET_PWROK, .chipset = 0U << 30 }, |
| { .logical = PAD_CFG0_LOGICAL_RESET_DEEP, .chipset = 1U << 30 }, |
| { .logical = PAD_CFG0_LOGICAL_RESET_PLTRST, .chipset = 2U << 30 }, |
| { .logical = PAD_CFG0_LOGICAL_RESET_RSMRST, .chipset = 3U << 30 }, |
| }; |
| |
| /* |
| * The GPIO driver for Jasperlake on Windows/Linux expects 32 GPIOs per pad |
| * group, regardless of whether or not there is a physical pad for each |
| * exposed GPIO number. |
| * |
| * This results in the OS having a sparse GPIO map, and devices that need |
| * to export an ACPI GPIO must use the OS expected number. |
| * |
| * Not all pins are usable as GPIO and those groups do not have a pad base. |
| * |
| * This layout matches the Linux kernel pinctrl map for JSP at: |
| * linux/drivers/pinctrl/intel/pinctrl-jasperlake.c |
| */ |
| static const struct pad_group jsl_community0_groups[] = { |
| |
| INTEL_GPP_BASE(GPP_F0, GPP_F0, GPP_F19, 320), /* GPP_F */ |
| INTEL_GPP(GPP_F0, GPIO_SPI0_IO_2, GPIO_SPI0_CLK_LOOPBK),/* SPI0 */ |
| INTEL_GPP_BASE(GPP_F0, GPP_B0, GPIO_GSPI1_CLK_LOOPBK, 32),/* GPP_B */ |
| INTEL_GPP_BASE(GPP_F0, GPP_A0, GPIO_ESPI_CLK_LOOPBK, 64),/* GPP_A */ |
| INTEL_GPP_BASE(GPP_F0, GPP_S0, GPP_S7, 96), /* GPP_S */ |
| INTEL_GPP_BASE(GPP_F0, GPP_R0, GPP_R7, 128), /* GPP_R */ |
| }; |
| |
| static const struct pad_group jsl_community1_groups[] = { |
| INTEL_GPP_BASE(GPP_H0, GPP_H0, GPP_H23, 160), /* GPP_H */ |
| INTEL_GPP_BASE(GPP_H0, GPP_D0, GPIO_SPI1_CLK_LOOPBK, 192),/* GPP_D */ |
| INTEL_GPP_BASE(GPP_H0, VGPIO_0, VGPIO_39, 224), /* VGPIO */ |
| INTEL_GPP_BASE(GPP_H0, GPP_C0, GPP_C23, 256), /* GPP_C */ |
| }; |
| |
| /* This community is not visible to the OS */ |
| static const struct pad_group jsl_community2_groups[] = { |
| INTEL_GPP(GPD0, GPD0, GPIO_DRAM_RESETB), /* GPD */ |
| }; |
| |
| static const struct pad_group jsl_community4_groups[] = { |
| INTEL_GPP(GPIO_L_BKLTEN, GPIO_L_BKLTEN, GPIO_MLK_RSTB), /* Reserved */ |
| INTEL_GPP_BASE(GPIO_L_BKLTEN, GPP_E0, GPP_E23, 288), /* GPP_E */ |
| }; |
| |
| static const struct pad_group jsl_community5_groups[] = { |
| INTEL_GPP_BASE(GPP_G0, GPP_G0, GPP_G7, 0), /* GPP_G */ |
| }; |
| |
| static const struct pad_community jsl_communities[TOTAL_GPIO_COMM] = { |
| /* GPP F, B, A, S, R */ |
| [COMM_0] = { |
| .port = PID_GPIOCOM0, |
| .first_pad = GPIO_COM0_START, |
| .last_pad = GPIO_COM0_END, |
| .num_gpi_regs = NUM_GPIO_COM0_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .pad_cfg_lock_offset = PAD_CFG_LOCK, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_gpe_sts_reg_0 = GPI_GPE_STS_0, |
| .gpi_gpe_en_reg_0 = GPI_GPE_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0, |
| .gpi_nmi_en_reg_0 = GPI_NMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPP_FBASR", |
| .acpi_path = "\\_SB.PCI0.GPIO", |
| .reset_map = rst_map_com0, |
| .num_reset_vals = ARRAY_SIZE(rst_map_com0), |
| .groups = jsl_community0_groups, |
| .num_groups = ARRAY_SIZE(jsl_community0_groups), |
| }, |
| /* GPP H, D, VGPIO, C */ |
| [COMM_1] = { |
| .port = PID_GPIOCOM1, |
| .first_pad = GPIO_COM1_START, |
| .last_pad = GPIO_COM1_END, |
| .num_gpi_regs = NUM_GPIO_COM1_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_gpe_sts_reg_0 = GPI_GPE_STS_0, |
| .gpi_gpe_en_reg_0 = GPI_GPE_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0, |
| .gpi_nmi_en_reg_0 = GPI_NMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPP_HDC", |
| .acpi_path = "\\_SB.PCI0.GPIO", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = jsl_community1_groups, |
| .num_groups = ARRAY_SIZE(jsl_community1_groups), |
| }, |
| /* GPD */ |
| [COMM_2] = { |
| .port = PID_GPIOCOM2, |
| .first_pad = GPIO_COM2_START, |
| .last_pad = GPIO_COM2_END, |
| .num_gpi_regs = NUM_GPIO_COM2_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_gpe_sts_reg_0 = GPI_GPE_STS_0, |
| .gpi_gpe_en_reg_0 = GPI_GPE_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPD", |
| .acpi_path = "\\_SB.PCI0.GPIO", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = jsl_community2_groups, |
| .num_groups = ARRAY_SIZE(jsl_community2_groups), |
| }, |
| /* GPP E */ |
| [COMM_4] = { |
| .port = PID_GPIOCOM4, |
| .first_pad = GPIO_COM4_START, |
| .last_pad = GPIO_COM4_END, |
| .num_gpi_regs = NUM_GPIO_COM4_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_gpe_sts_reg_0 = GPI_GPE_STS_0, |
| .gpi_gpe_en_reg_0 = GPI_GPE_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0, |
| .gpi_nmi_en_reg_0 = GPI_NMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPP_E", |
| .acpi_path = "\\_SB.PCI0.GPIO", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = jsl_community4_groups, |
| .num_groups = ARRAY_SIZE(jsl_community4_groups), |
| }, |
| /* GPP G */ |
| [COMM_5] = { |
| .port = PID_GPIOCOM5, |
| .first_pad = GPIO_COM5_START, |
| .last_pad = GPIO_COM5_END, |
| .num_gpi_regs = NUM_GPIO_COM5_GPI_REGS, |
| .pad_cfg_base = PAD_CFG_BASE, |
| .host_own_reg_0 = HOSTSW_OWN_REG_0, |
| .gpi_int_sts_reg_0 = GPI_INT_STS_0, |
| .gpi_int_en_reg_0 = GPI_INT_EN_0, |
| .gpi_gpe_sts_reg_0 = GPI_GPE_STS_0, |
| .gpi_gpe_en_reg_0 = GPI_GPE_EN_0, |
| .gpi_smi_sts_reg_0 = GPI_SMI_STS_0, |
| .gpi_smi_en_reg_0 = GPI_SMI_EN_0, |
| .gpi_nmi_sts_reg_0 = GPI_NMI_STS_0, |
| .gpi_nmi_en_reg_0 = GPI_NMI_EN_0, |
| .max_pads_per_group = GPIO_MAX_NUM_PER_GROUP, |
| .name = "GPP_G", |
| .acpi_path = "\\_SB.PCI0.GPIO", |
| .reset_map = rst_map, |
| .num_reset_vals = ARRAY_SIZE(rst_map), |
| .groups = jsl_community5_groups, |
| .num_groups = ARRAY_SIZE(jsl_community5_groups), |
| } |
| }; |
| |
| const struct pad_community *soc_gpio_get_community(size_t *num_communities) |
| { |
| *num_communities = ARRAY_SIZE(jsl_communities); |
| return jsl_communities; |
| } |
| |
| const struct pmc_to_gpio_route *soc_pmc_gpio_routes(size_t *num) |
| { |
| static const struct pmc_to_gpio_route routes[] = { |
| { PMC_GPP_A, GPP_A }, |
| { PMC_GPP_B, GPP_B }, |
| { PMC_GPP_G, GPP_G }, |
| { PMC_GPP_C, GPP_C }, |
| { PMC_GPP_R, GPP_R }, |
| { PMC_GPP_D, GPP_D }, |
| { PMC_GPP_S, GPP_S }, |
| { PMC_GPP_H, GPP_H }, |
| { PMC_GPP_F, GPP_F }, |
| { PMC_GPD, GPP_GPD }, |
| { PMC_GPP_E, GPP_E } |
| }; |
| |
| *num = ARRAY_SIZE(routes); |
| return routes; |
| } |