| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2007-2008 coresystems GmbH |
| * Copyright (C) 2014 Google Inc. |
| * Copyright (C) 2015 Intel Corporation. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc. |
| */ |
| |
| |
| #ifndef _SOC_CHIP_H_ |
| #define _SOC_CHIP_H_ |
| |
| #include <stdint.h> |
| #include <soc/gpio_defs.h> |
| #include <soc/pci_devs.h> |
| #include <soc/pmc.h> |
| #include <soc/serialio.h> |
| |
| struct soc_intel_skylake_config { |
| /* |
| * Interrupt Routing configuration |
| * If bit7 is 1, the interrupt is disabled. |
| */ |
| uint8_t pirqa_routing; |
| uint8_t pirqb_routing; |
| uint8_t pirqc_routing; |
| uint8_t pirqd_routing; |
| uint8_t pirqe_routing; |
| uint8_t pirqf_routing; |
| uint8_t pirqg_routing; |
| uint8_t pirqh_routing; |
| |
| /* GPE configuration */ |
| uint32_t gpe0_en_1; /* GPE0_EN_31_0 */ |
| uint32_t gpe0_en_2; /* GPE0_EN_63_32 */ |
| uint32_t gpe0_en_3; /* GPE0_EN_95_64 */ |
| uint32_t gpe0_en_4; /* GPE0_EN_127_96 / GPE_STD */ |
| /* Gpio group routed to each dword of the GPE0 block. Values are |
| * of the form GPP_[A:G] or GPD. */ |
| uint8_t gpe0_dw0; /* GPE0_31_0 STS/EN */ |
| uint8_t gpe0_dw1; /* GPE0_63_32 STS/EN */ |
| uint8_t gpe0_dw2; /* GPE0_95_64 STS/EN */ |
| |
| /* Generic IO decode ranges */ |
| uint32_t gen1_dec; |
| uint32_t gen2_dec; |
| uint32_t gen3_dec; |
| uint32_t gen4_dec; |
| |
| /* |
| * Digital Port Hotplug Enable: |
| * 0x04 = Enabled, 2ms short pulse |
| * 0x05 = Enabled, 4.5ms short pulse |
| * 0x06 = Enabled, 6ms short pulse |
| * 0x07 = Enabled, 100ms short pulse |
| */ |
| u8 gpu_dp_b_hotplug; |
| u8 gpu_dp_c_hotplug; |
| u8 gpu_dp_d_hotplug; |
| |
| /* Panel power sequence timings */ |
| u8 gpu_panel_port_select; |
| u8 gpu_panel_power_cycle_delay; |
| u16 gpu_panel_power_up_delay; |
| u16 gpu_panel_power_down_delay; |
| u16 gpu_panel_power_backlight_on_delay; |
| u16 gpu_panel_power_backlight_off_delay; |
| |
| /* Panel backlight settings */ |
| u32 gpu_cpu_backlight; |
| u32 gpu_pch_backlight; |
| |
| /* Enable S0iX support */ |
| int s0ix_enable; |
| |
| /* Enable DPTF support */ |
| int dptf_enable; |
| |
| /* Deep SX enable for both AC and DC */ |
| int deep_s3_enable; |
| int deep_s5_enable; |
| |
| /* |
| * Deep Sx Configuration |
| * DSX_EN_WAKE_PIN - Enable WAKE# pin |
| * DSX_EN_LAN_WAKE_PIN - Enable LAN_WAKE# pin |
| * DSX_EN_AC_PRESENT_PIN - Enable AC_PRESENT pin |
| */ |
| uint32_t deep_sx_config; |
| |
| /* TCC activation offset */ |
| int tcc_offset; |
| |
| /* |
| * The following fields come from FspUpdVpd.h. |
| * These are configuration values that are passed to FSP during |
| * MemoryInit. |
| */ |
| u64 PlatformMemorySize; |
| u8 SmramMask; |
| u8 MrcFastBoot; |
| u32 TsegSize; |
| u16 MmioSize; |
| |
| /* Probeless Trace function */ |
| u8 ProbelessTrace; |
| |
| /* |
| * System Agent dynamic frequency configuration |
| * When enabled memory will be trained at two different frequencies. |
| * 0 = Disabled |
| * 1 = FixedLow |
| * 2 = FixedHigh |
| * 3 = Enabled |
| */ |
| u8 SaGv; |
| |
| /* Enable/disable Rank Margin Tool */ |
| u8 Rmt; |
| |
| /* Lan */ |
| u8 EnableLan; |
| |
| /* SATA related */ |
| u8 EnableSata; |
| u8 SataMode; |
| u8 SataSalpSupport; |
| u8 SataPortsEnable[8]; |
| u8 SataPortsDevSlp[8]; |
| |
| /* Audio related */ |
| u8 EnableAzalia; |
| u8 DspEnable; |
| |
| /* |
| * I/O Buffer Ownership: |
| * 0: HD-A Link |
| * 1 Shared, HD-A Link and I2S Port |
| * 3: I2S Ports |
| */ |
| u8 IoBufferOwnership; |
| |
| /* Trace Hub function */ |
| u8 EnableTraceHub; |
| |
| /* Pcie Root Ports */ |
| u8 PcieRpEnable[20]; |
| u8 PcieRpClkReqSupport[20]; |
| u8 PcieRpClkReqNumber[20]; |
| |
| /* USB related */ |
| u8 PortUsb20Enable[16]; |
| u8 PortUsb30Enable[10]; |
| u8 XdciEnable; |
| u8 SsicPortEnable; |
| u8 Usb2AfePetxiset[16]; |
| u8 Usb2AfeTxiset[16]; |
| u8 Usb2AfePredeemp[16]; |
| u8 Usb2AfePehalfbit[16]; |
| u8 Usb3HsioTxDeEmphEnable[10]; |
| u8 Usb3HsioTxDeEmph[10]; |
| u8 Usb3HsioTxDownscaleAmpEnable[10]; |
| u8 Usb3HsioTxDownscaleAmp[10]; |
| |
| /* SMBus */ |
| u8 SmbusEnable; |
| |
| /* |
| * SerialIO device mode selection: |
| * |
| * Device index: |
| * PchSerialIoIndexI2C0 |
| * PchSerialIoIndexI2C1 |
| * PchSerialIoIndexI2C2 |
| * PchSerialIoIndexI2C3 |
| * PchSerialIoIndexI2C4 |
| * PchSerialIoIndexI2C5 |
| * PchSerialIoIndexI2C6 |
| * PchSerialIoIndexSpi0 |
| * PchSerialIoIndexSpi1 |
| * PchSerialIoIndexUart0 |
| * PchSerialIoIndexUart1 |
| * PchSerialIoIndexUart2 |
| * |
| * Mode select: |
| * PchSerialIoDisabled |
| * PchSerialIoAcpi |
| * PchSerialIoPci |
| * PchSerialIoAcpiHidden |
| * PchSerialIoLegacyUart |
| */ |
| u8 SerialIoDevMode[PchSerialIoIndexMax]; |
| |
| /* Camera */ |
| u8 Cio2Enable; |
| |
| /* eMMC and SD */ |
| u8 ScsEmmcEnabled; |
| u8 ScsEmmcHs400Enabled; |
| u8 ScsSdCardEnabled; |
| |
| /* Integrated Sensor */ |
| u8 IshEnable; |
| |
| u8 PttSwitch; |
| u8 HeciTimeouts; |
| u8 HsioMessaging; |
| u8 Heci3Enabled; |
| |
| /* Gfx related */ |
| u8 IgdDvmt50PreAlloc; |
| u8 PrimaryDisplay; |
| u8 InternalGfx; |
| u8 ApertureSize; |
| u8 SkipExtGfxScan; |
| u8 ScanExtGfxForLegacyOpRom; |
| |
| /* |
| * The following fields come from fsp_vpd.h |
| * These are configuration values that are passed to FSP during |
| * SiliconInit. |
| */ |
| u32 LogoPtr; |
| u32 LogoSize; |
| u32 GraphicsConfigPtr; |
| u8 Device4Enable; |
| u8 RtcLock; |
| }; |
| |
| typedef struct soc_intel_skylake_config config_t; |
| |
| extern struct chip_operations soc_ops; |
| |
| #endif |