| /** @file |
| |
| Copyright (c) 2022, Intel Corporation. All rights reserved.<BR> |
| |
| Redistribution and use in source and binary forms, with or without modification, |
| are permitted provided that the following conditions are met: |
| |
| * Redistributions of source code must retain the above copyright notice, this |
| list of conditions and the following disclaimer. |
| * Redistributions in binary form must reproduce the above copyright notice, this |
| list of conditions and the following disclaimer in the documentation and/or |
| other materials provided with the distribution. |
| * Neither the name of Intel Corporation nor the names of its contributors may |
| be used to endorse or promote products derived from this software without |
| specific prior written permission. |
| |
| THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE |
| LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF |
| THE POSSIBILITY OF SUCH DAMAGE. |
| |
| This file is automatically generated. Please do NOT modify !!! |
| |
| **/ |
| |
| #ifndef __FSPSUPD_H__ |
| #define __FSPSUPD_H__ |
| |
| #include <FspUpd.h> |
| |
| #pragma pack(1) |
| |
| |
| /// |
| /// Azalia Header structure |
| /// |
| typedef struct { |
| UINT16 VendorId; ///< Codec Vendor ID |
| UINT16 DeviceId; ///< Codec Device ID |
| UINT8 RevisionId; ///< Revision ID of the codec. 0xFF matches any revision. |
| UINT8 SdiNum; ///< SDI number, 0xFF matches any SDI. |
| UINT16 DataDwords; ///< Number of data DWORDs pointed by the codec data buffer. |
| UINT32 Reserved; ///< Reserved for future use. Must be set to 0. |
| } AZALIA_HEADER; |
| |
| /// |
| /// Audio Azalia Verb Table structure |
| /// |
| typedef struct { |
| AZALIA_HEADER Header; ///< AZALIA PCH header |
| UINT32 *Data; ///< Pointer to the data buffer. Its length is specified in the header |
| } AUDIO_AZALIA_VERB_TABLE; |
| |
| /// |
| /// Refer to the definition of PCH_INT_PIN |
| /// |
| typedef enum { |
| SiPchNoInt, ///< No Interrupt Pin |
| SiPchIntA, |
| SiPchIntB, |
| SiPchIntC, |
| SiPchIntD |
| } SI_PCH_INT_PIN; |
| /// |
| /// The PCH_DEVICE_INTERRUPT_CONFIG block describes interrupt pin, IRQ and interrupt mode for PCH device. |
| /// |
| typedef struct { |
| UINT8 Device; ///< Device number |
| UINT8 Function; ///< Device function |
| UINT8 IntX; ///< Interrupt pin: INTA-INTD (see SI_PCH_INT_PIN) |
| UINT8 Irq; ///< IRQ to be set for device. |
| } SI_PCH_DEVICE_INTERRUPT_CONFIG; |
| |
| #define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices |
| |
| |
| /** Fsp S Configuration |
| **/ |
| typedef struct { |
| |
| /** Offset 0x0040 - Reserved |
| **/ |
| UINT8 Reserved0[16]; |
| |
| /** Offset 0x0050 - Graphics Configuration Ptr |
| Points to VBT |
| **/ |
| UINT32 GraphicsConfigPtr; |
| |
| /** Offset 0x0054 - Enable Device 4 |
| Enable/disable Device 4 |
| $EN_DIS |
| **/ |
| UINT8 Device4Enable; |
| |
| /** Offset 0x0055 - Reserved |
| **/ |
| UINT8 Reserved1[3]; |
| |
| /** Offset 0x0058 - MicrocodeRegionBase |
| Memory Base of Microcode Updates |
| **/ |
| UINT32 MicrocodeRegionBase; |
| |
| /** Offset 0x005C - MicrocodeRegionSize |
| Size of Microcode Updates |
| **/ |
| UINT32 MicrocodeRegionSize; |
| |
| /** Offset 0x0060 - Reserved |
| **/ |
| UINT8 Reserved2; |
| |
| /** Offset 0x0061 - Enable SATA SALP Support |
| Enable/disable SATA Aggressive Link Power Management. |
| $EN_DIS |
| **/ |
| UINT8 SataSalpSupport; |
| |
| /** Offset 0x0062 - Enable SATA ports |
| Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1, |
| and so on. |
| **/ |
| UINT8 SataPortsEnable[8]; |
| |
| /** Offset 0x006A - Enable SATA DEVSLP Feature |
| Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each |
| port, byte0 for port0, byte1 for port1, and so on. |
| **/ |
| UINT8 SataPortsDevSlp[8]; |
| |
| /** Offset 0x0072 - Reserved |
| **/ |
| UINT8 Reserved3[34]; |
| |
| /** Offset 0x0094 - Enable USB2 ports |
| Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for |
| port1, and so on. |
| **/ |
| UINT8 PortUsb20Enable[16]; |
| |
| /** Offset 0x00A4 - Enable USB3 ports |
| Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for |
| port1, and so on. |
| **/ |
| UINT8 PortUsb30Enable[10]; |
| |
| /** Offset 0x00AE - Enable xDCI controller |
| Enable/disable to xDCI controller. |
| $EN_DIS |
| **/ |
| UINT8 XdciEnable; |
| |
| /** Offset 0x00AF - Reserved |
| **/ |
| UINT8 Reserved4[26]; |
| |
| /** Offset 0x00C9 - Enable SATA |
| Enable/disable SATA controller. |
| $EN_DIS |
| **/ |
| UINT8 SataEnable; |
| |
| /** Offset 0x00CA - SATA Mode |
| Select SATA controller working mode. |
| 0:AHCI, 1:RAID |
| **/ |
| UINT8 SataMode; |
| |
| /** Offset 0x00CB - SPIn Device Mode |
| Selects SPI operation mode. N represents controller index: SPI0, SPI1, ... Available |
| modes: 0:SerialIoSpiDisabled, 1:SerialIoSpiPci, 2:SerialIoSpiHidden |
| **/ |
| UINT8 SerialIoSpiMode[7]; |
| |
| /** Offset 0x00D2 - Reserved |
| **/ |
| UINT8 Reserved5[35]; |
| |
| /** Offset 0x00F5 - SPIn Default Chip Select Mode HW/SW |
| Sets Default CS Mode Hardware or Software. N represents controller index: SPI0, |
| SPI1, ... Available options: 0:HW, 1:SW |
| **/ |
| UINT8 SerialIoSpiCsMode[7]; |
| |
| /** Offset 0x00FC - SPIn Default Chip Select State Low/High |
| Sets Default CS State Low or High. N represents controller index: SPI0, SPI1, ... |
| Available options: 0:Low, 1:High |
| **/ |
| UINT8 SerialIoSpiCsState[7]; |
| |
| /** Offset 0x0103 - Reserved |
| **/ |
| UINT8 Reserved6[141]; |
| |
| /** Offset 0x0190 - UARTn Device Mode |
| Selects Uart operation mode. N represents controller index: Uart0, Uart1, ... Available |
| modes: 0:SerialIoUartDisabled, 1:SerialIoUartPci, 2:SerialIoUartHidden, 3:SerialIoUartCom, |
| 4:SerialIoUartSkipInit |
| **/ |
| UINT8 SerialIoUartMode[7]; |
| |
| /** Offset 0x0197 - Reserved |
| **/ |
| UINT8 Reserved7[64]; |
| |
| /** Offset 0x01D7 - Enables UART hardware flow control, CTS and RTS lines |
| Enables UART hardware flow control, CTS and RTS lines. |
| **/ |
| UINT8 SerialIoUartAutoFlow[7]; |
| |
| /** Offset 0x01DE - Reserved |
| **/ |
| UINT8 Reserved8[2]; |
| |
| /** Offset 0x01E0 - SerialIoUartRtsPinMuxPolicy |
| Select SerialIo Uart Rts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RTS* |
| for possible values. |
| **/ |
| UINT32 SerialIoUartRtsPinMuxPolicy[7]; |
| |
| /** Offset 0x01FC - SerialIoUartCtsPinMuxPolicy |
| Select SerialIo Uart Cts pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_CTS* |
| for possible values. |
| **/ |
| UINT32 SerialIoUartCtsPinMuxPolicy[7]; |
| |
| /** Offset 0x0218 - SerialIoUartRxPinMuxPolicy |
| Select SerialIo Uart Rx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_RX* for |
| possible values. |
| **/ |
| UINT32 SerialIoUartRxPinMuxPolicy[7]; |
| |
| /** Offset 0x0234 - SerialIoUartTxPinMuxPolicy |
| Select SerialIo Uart Tx pin muxing. Refer to GPIO_*_MUXING_SERIALIO_UARTx_TX* for |
| possible values. |
| **/ |
| UINT32 SerialIoUartTxPinMuxPolicy[7]; |
| |
| /** Offset 0x0250 - Reserved |
| **/ |
| UINT8 Reserved9[7]; |
| |
| /** Offset 0x0257 - I2Cn Device Mode |
| Selects I2c operation mode. N represents controller index: I2c0, I2c1, ... Available |
| modes: 0:SerialIoI2cDisabled, 1:SerialIoI2cPci, 2:SerialIoI2cHidden |
| **/ |
| UINT8 SerialIoI2cMode[8]; |
| |
| /** Offset 0x025F - Reserved |
| **/ |
| UINT8 Reserved10; |
| |
| /** Offset 0x0260 - Serial IO I2C SDA Pin Muxing |
| Select SerialIo I2c Sda pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SDA* for |
| possible values. |
| **/ |
| UINT32 PchSerialIoI2cSdaPinMux[8]; |
| |
| /** Offset 0x0280 - Serial IO I2C SCL Pin Muxing |
| Select SerialIo I2c Scl pin muxing. Refer to GPIO_*_MUXING_SERIALIO_I2Cx_SCL* for |
| possible values. |
| **/ |
| UINT32 PchSerialIoI2cSclPinMux[8]; |
| |
| /** Offset 0x02A0 - Reserved |
| **/ |
| UINT8 Reserved11[262]; |
| |
| /** Offset 0x03A6 - USB Per Port HS Preemphasis Bias |
| USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, |
| 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port. |
| **/ |
| UINT8 Usb2PhyPetxiset[16]; |
| |
| /** Offset 0x03B6 - USB Per Port HS Transmitter Bias |
| USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV, |
| 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port. |
| **/ |
| UINT8 Usb2PhyTxiset[16]; |
| |
| /** Offset 0x03C6 - USB Per Port HS Transmitter Emphasis |
| USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON, |
| 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port. |
| **/ |
| UINT8 Usb2PhyPredeemp[16]; |
| |
| /** Offset 0x03D6 - USB Per Port Half Bit Pre-emphasis |
| USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis. |
| One byte for each port. |
| **/ |
| UINT8 Usb2PhyPehalfbit[16]; |
| |
| /** Offset 0x03E6 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment |
| Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value |
| in arrary can be between 0-1. One byte for each port. |
| **/ |
| UINT8 Usb3HsioTxDeEmphEnable[10]; |
| |
| /** Offset 0x03F0 - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting |
| USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16], |
| <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port. |
| **/ |
| UINT8 Usb3HsioTxDeEmph[10]; |
| |
| /** Offset 0x03FA - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment |
| Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value |
| in arrary can be between 0-1. One byte for each port. |
| **/ |
| UINT8 Usb3HsioTxDownscaleAmpEnable[10]; |
| |
| /** Offset 0x0404 - USB 3.0 TX Output Downscale Amplitude Adjustment |
| USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default |
| = 00h</b>. One byte for each port. |
| **/ |
| UINT8 Usb3HsioTxDownscaleAmp[10]; |
| |
| /** Offset 0x040E - Reserved |
| **/ |
| UINT8 Reserved12[80]; |
| |
| /** Offset 0x045E - Enable LAN |
| Enable/disable LAN controller. |
| $EN_DIS |
| **/ |
| UINT8 PchLanEnable; |
| |
| /** Offset 0x045F - Reserved |
| **/ |
| UINT8 Reserved13[21]; |
| |
| /** Offset 0x0474 - PCIe PTM enable/disable |
| Enable/disable Precision Time Measurement for PCIE Root Ports. |
| **/ |
| UINT8 PciePtm[28]; |
| |
| /** Offset 0x0490 - Reserved |
| **/ |
| UINT8 Reserved14[81]; |
| |
| /** Offset 0x04E1 - Transition time in microseconds from Low Current Mode Voltage to High Current Mode Voltage |
| This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX |
| to low current mode voltage. |
| **/ |
| UINT8 PchFivrVccinAuxLowToHighCurModeVolTranTime; |
| |
| /** Offset 0x04E2 - Transition time in microseconds from Retention Mode Voltage to High Current Mode Voltage |
| This field has 1us resolution. When value is 0 PCH will not transition VCCIN_AUX |
| to retention mode voltage. |
| **/ |
| UINT8 PchFivrVccinAuxRetToHighCurModeVolTranTime; |
| |
| /** Offset 0x04E3 - Reserved |
| **/ |
| UINT8 Reserved15; |
| |
| /** Offset 0x04E4 - Transition time in microseconds from Off (0V) to High Current Mode Voltage |
| This field has 1us resolution. When value is 0 Transition to 0V is disabled. |
| **/ |
| UINT16 PchFivrVccinAuxOffToHighCurModeVolTranTime; |
| |
| /** Offset 0x04E6 - Reserved |
| **/ |
| UINT8 Reserved16[32]; |
| |
| /** Offset 0x0506 - CNVi Configuration |
| This option allows for automatic detection of Connectivity Solution. [Auto Detection] |
| assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi. |
| 0:Disable, 1:Auto |
| **/ |
| UINT8 CnviMode; |
| |
| /** Offset 0x0507 - Reserved |
| **/ |
| UINT8 Reserved17; |
| |
| /** Offset 0x0508 - CNVi BT Core |
| Enable/Disable CNVi BT Core, Default is ENABLE. 0: DISABLE, 1: ENABLE |
| $EN_DIS |
| **/ |
| UINT8 CnviBtCore; |
| |
| /** Offset 0x0509 - CNVi BT Audio Offload |
| Enable/Disable BT Audio Offload, Default is DISABLE. 0: DISABLE, 1: ENABLE |
| $EN_DIS |
| **/ |
| UINT8 CnviBtAudioOffload; |
| |
| /** Offset 0x050A - Reserved |
| **/ |
| UINT8 Reserved18[2]; |
| |
| /** Offset 0x050C - CNVi RF_RESET pin muxing |
| Select CNVi RF_RESET# pin depending on board routing. LP/P/M: GPP_A8 = 0x2942E408(default) |
| or GPP_F4 = 0x194CE404. H/S: 0. Refer to GPIO_*_MUXING_CNVI_RF_RESET_* in GpioPins*.h. |
| **/ |
| UINT32 CnviRfResetPinMux; |
| |
| /** Offset 0x0510 - CNVi CLKREQ pin muxing |
| Select CNVi CLKREQ pin depending on board routing. LP/P/M: GPP_A9 = 0x3942E609(default) |
| or GPP_F5 = 0x394CE605. H/S: 0. Refer to GPIO_*_MUXING_CNVI_CRF_XTAL_CLKREQ_* in |
| GpioPins*.h. |
| **/ |
| UINT32 CnviClkreqPinMux; |
| |
| /** Offset 0x0514 - Reserved |
| **/ |
| UINT8 Reserved19[164]; |
| |
| /** Offset 0x05B8 - Enable/Disable PeiGraphicsPeimInit |
| <b>Enable(Default):</b> FSP will initialize the framebuffer and provide it via EFI_PEI_GRAPHICS_INFO_HOB. |
| Disable: FSP will NOT initialize the framebuffer. |
| $EN_DIS |
| **/ |
| UINT8 PeiGraphicsPeimInit; |
| |
| /** Offset 0x05B9 - Enable D3 Hot in TCSS |
| This policy will enable/disable D3 hot support in IOM |
| $EN_DIS |
| **/ |
| UINT8 D3HotEnable; |
| |
| /** Offset 0x05BA - Enable or disable GNA device |
| 0=Disable, 1(Default)=Enable |
| $EN_DIS |
| **/ |
| UINT8 GnaEnable; |
| |
| /** Offset 0x05BB - Reserved |
| **/ |
| UINT8 Reserved20; |
| |
| /** Offset 0x05BC - TypeC port GPIO setting |
| GPIO Ping number for Type C Aux Oritation setting, use the GpioPad that is defined |
| in GpioPinsXXXH.h and GpioPinsXXXLp.h as argument.(XXX is platform name, Ex: Adl |
| = AlderLake) |
| **/ |
| UINT32 IomTypeCPortPadCfg[8]; |
| |
| /** Offset 0x05DC - CPU USB3 Port Over Current Pin |
| Describe the specific over current pin number of USBC Port N. |
| **/ |
| UINT8 CpuUsb3OverCurrentPin[8]; |
| |
| /** Offset 0x05E4 - Enable D3 Cold in TCSS |
| This policy will enable/disable D3 cold support in IOM |
| $EN_DIS |
| **/ |
| UINT8 D3ColdEnable; |
| |
| /** Offset 0x05E5 - Reserved |
| **/ |
| UINT8 Reserved21[11]; |
| |
| /** Offset 0x05F0 - Platform LID Status for LFP Displays. |
| LFP Display Lid Status (LID_STATUS enum): 0 (Default): LidClosed, 1: LidOpen. |
| 0: LidClosed, 1: LidOpen |
| **/ |
| UINT8 LidStatus; |
| |
| /** Offset 0x05F1 - Reserved |
| **/ |
| UINT8 Reserved22[8]; |
| |
| /** Offset 0x05F9 - Enable VMD controller |
| Enable/disable to VMD controller.0: Disable(Default); 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 VmdEnable; |
| |
| /** Offset 0x05FA - Reserved |
| **/ |
| UINT8 Reserved23[144]; |
| |
| /** Offset 0x068A - TCSS Aux Orientation Override Enable |
| Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides |
| **/ |
| UINT16 TcssAuxOri; |
| |
| /** Offset 0x068C - TCSS HSL Orientation Override Enable |
| Bits 0, 2, ... 10 control override enables, bits 1, 3, ... 11 control overrides |
| **/ |
| UINT16 TcssHslOri; |
| |
| /** Offset 0x068E - Reserved |
| **/ |
| UINT8 Reserved24; |
| |
| /** Offset 0x068F - ITBT Root Port Enable |
| ITBT Root Port Enable, 0:Disable, 1:Enable |
| 0:Disable, 1:Enable |
| **/ |
| UINT8 ITbtPcieRootPortEn[4]; |
| |
| /** Offset 0x0693 - TCSS USB Port Enable |
| Bits 0, 1, ... max Type C port control enables |
| **/ |
| UINT8 UsbTcPortEn; |
| |
| /** Offset 0x0694 - Reserved |
| **/ |
| UINT8 Reserved25[2]; |
| |
| /** Offset 0x0696 - ITbtConnectTopology Timeout value |
| ITbtConnectTopologyTimeout value. Specified increment values in miliseconds. Range |
| is 0-10000. 100 = 100 ms. |
| **/ |
| UINT16 ITbtConnectTopologyTimeoutInMs; |
| |
| /** Offset 0x0698 - Reserved |
| **/ |
| UINT8 Reserved26[7]; |
| |
| /** Offset 0x069F - Enable/Disable PTM |
| This policy will enable/disable Precision Time Measurement for TCSS PCIe Root Ports |
| $EN_DIS |
| **/ |
| UINT8 PtmEnabled[4]; |
| |
| /** Offset 0x06A3 - Reserved |
| **/ |
| UINT8 Reserved27[53]; |
| |
| /** Offset 0x06D8 - CpuMpPpi |
| <b>Optional</b> pointer to the boot loader's implementation of EFI_PEI_MP_SERVICES_PPI. |
| If not NULL, FSP will use the boot loader's implementation of multiprocessing. |
| See section 5.1.4 of the FSP Integration Guide for more details. |
| **/ |
| UINT32 CpuMpPpi; |
| |
| /** Offset 0x06DC - Reserved |
| **/ |
| UINT8 Reserved28[69]; |
| |
| /** Offset 0x0721 - Enable Power Optimizer |
| Enable DMI Power Optimizer on PCH side. |
| $EN_DIS |
| **/ |
| UINT8 PchPwrOptEnable; |
| |
| /** Offset 0x0722 - Reserved |
| **/ |
| UINT8 Reserved29[32]; |
| |
| /** Offset 0x0742 - Enable PCH ISH SPI Cs0 pins assigned |
| Set if ISH SPI Cs0 pins are to be enabled by BIOS. 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchIshSpiCs0Enable[1]; |
| |
| /** Offset 0x0743 - Reserved |
| **/ |
| UINT8 Reserved30[2]; |
| |
| /** Offset 0x0745 - Enable PCH ISH SPI pins assigned |
| Set if ISH SPI native pins are to be enabled by BIOS. 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchIshSpiEnable[1]; |
| |
| /** Offset 0x0746 - Enable PCH ISH UART pins assigned |
| Set if ISH UART native pins are to be enabled by BIOS. 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchIshUartEnable[2]; |
| |
| /** Offset 0x0748 - Enable PCH ISH I2C pins assigned |
| Set if ISH I2C native pins are to be enabled by BIOS. 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchIshI2cEnable[3]; |
| |
| /** Offset 0x074B - Reserved |
| **/ |
| UINT8 Reserved31; |
| |
| /** Offset 0x074C - Enable PCH ISH GP pins assigned |
| Set if ISH GP native pins are to be enabled by BIOS. 0: Disable; 1: Enable. |
| **/ |
| UINT8 PchIshGpEnable[12]; |
| |
| /** Offset 0x0758 - Reserved |
| **/ |
| UINT8 Reserved32[3]; |
| |
| /** Offset 0x075B - Enable LOCKDOWN BIOS LOCK |
| Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region |
| protection. |
| $EN_DIS |
| **/ |
| UINT8 PchLockDownBiosLock; |
| |
| /** Offset 0x075C - Reserved |
| **/ |
| UINT8 Reserved33[2]; |
| |
| /** Offset 0x075E - RTC Cmos Memory Lock |
| Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper |
| and and lower 128-byte bank of RTC RAM. |
| $EN_DIS |
| **/ |
| UINT8 RtcMemoryLock; |
| |
| /** Offset 0x075F - Enable PCIE RP HotPlug |
| Indicate whether the root port is hot plug available. |
| **/ |
| UINT8 PcieRpHotPlug[28]; |
| |
| /** Offset 0x077B - Reserved |
| **/ |
| UINT8 Reserved34[56]; |
| |
| /** Offset 0x07B3 - Enable PCIE RP Clk Req Detect |
| Probe CLKREQ# signal before enabling CLKREQ# based power management. |
| **/ |
| UINT8 PcieRpClkReqDetect[28]; |
| |
| /** Offset 0x07CF - PCIE RP Advanced Error Report |
| Indicate whether the Advanced Error Reporting is enabled. |
| **/ |
| UINT8 PcieRpAdvancedErrorReporting[28]; |
| |
| /** Offset 0x07EB - Reserved |
| **/ |
| UINT8 Reserved35[196]; |
| |
| /** Offset 0x08AF - PCIE RP Max Payload |
| Max Payload Size supported, Default 64B, see enum PCH_PCIE_MAX_PAYLOAD. |
| **/ |
| UINT8 PcieRpMaxPayload[28]; |
| |
| /** Offset 0x08CB - Reserved |
| **/ |
| UINT8 Reserved36[205]; |
| |
| /** Offset 0x0998 - PCIE RP Aspm |
| The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is |
| PchPcieAspmAutoConfig. |
| **/ |
| UINT8 PcieRpAspm[28]; |
| |
| /** Offset 0x09B4 - PCIE RP L1 Substates |
| The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL). |
| Default is PchPcieL1SubstatesL1_1_2. |
| **/ |
| UINT8 PcieRpL1Substates[28]; |
| |
| /** Offset 0x09D0 - PCIE RP Ltr Enable |
| Latency Tolerance Reporting Mechanism. |
| **/ |
| UINT8 PcieRpLtrEnable[28]; |
| |
| /** Offset 0x09EC - Reserved |
| **/ |
| UINT8 Reserved37[1648]; |
| |
| /** Offset 0x105C - PCH Sata Pwr Opt Enable |
| SATA Power Optimizer on PCH side. |
| $EN_DIS |
| **/ |
| UINT8 SataPwrOptEnable; |
| |
| /** Offset 0x105D - Reserved |
| **/ |
| UINT8 Reserved38[50]; |
| |
| /** Offset 0x108F - Enable SATA Port DmVal |
| DITO multiplier. Default is 15. |
| **/ |
| UINT8 SataPortsDmVal[8]; |
| |
| /** Offset 0x1097 - Reserved |
| **/ |
| UINT8 Reserved39; |
| |
| /** Offset 0x1098 - Enable SATA Port DmVal |
| DEVSLP Idle Timeout (DITO), Default is 625. |
| **/ |
| UINT16 SataPortsDitoVal[8]; |
| |
| /** Offset 0x10A8 - Reserved |
| **/ |
| UINT8 Reserved40[18]; |
| |
| /** Offset 0x10BA - UFS enable/disable |
| PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms |
| $EN_DIS |
| **/ |
| UINT8 UfsEnable[2]; |
| |
| /** Offset 0x10BC - Reserved |
| **/ |
| UINT8 Reserved41[46]; |
| |
| /** Offset 0x10EA - USB2 Port Over Current Pin |
| Describe the specific over current pin number of USB 2.0 Port N. |
| **/ |
| UINT8 Usb2OverCurrentPin[16]; |
| |
| /** Offset 0x10FA - USB3 Port Over Current Pin |
| Describe the specific over current pin number of USB 3.0 Port N. |
| **/ |
| UINT8 Usb3OverCurrentPin[10]; |
| |
| /** Offset 0x1104 - Reserved |
| **/ |
| UINT8 Reserved42[16]; |
| |
| /** Offset 0x1114 - Enable 8254 Static Clock Gating |
| Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time |
| might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support |
| legacy OS using 8254 timer. Also enable this while S0ix is enabled. |
| $EN_DIS |
| **/ |
| UINT8 Enable8254ClockGating; |
| |
| /** Offset 0x1115 - Enable 8254 Static Clock Gating On S3 |
| This is only applicable when Enable8254ClockGating is disabled. FSP will do the |
| 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This |
| avoids the SMI requirement for the programming. |
| $EN_DIS |
| **/ |
| UINT8 Enable8254ClockGatingOnS3; |
| |
| /** Offset 0x1116 - Reserved |
| **/ |
| UINT8 Reserved43; |
| |
| /** Offset 0x1117 - Hybrid Storage Detection and Configuration Mode |
| Enables support for Hybrid storage devices. 0: Disabled; 1: Dynamic Configuration. |
| Default is 0: Disabled |
| 0: Disabled, 1: Dynamic Configuration |
| **/ |
| UINT8 HybridStorageMode; |
| |
| /** Offset 0x1118 - Reserved |
| **/ |
| UINT8 Reserved44[111]; |
| |
| /** Offset 0x1187 - Enable PS_ON. |
| PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power |
| target that will be required by the California Energy Commission (CEC). When FALSE, |
| PS_ON is to be disabled. |
| $EN_DIS |
| **/ |
| UINT8 PsOnEnable; |
| |
| /** Offset 0x1188 - Reserved |
| **/ |
| UINT8 Reserved45[134]; |
| |
| /** Offset 0x120E - Skip PAM regsiter lock |
| Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default): |
| PAM registers will be locked by RC |
| $EN_DIS |
| **/ |
| UINT8 SkipPamLock; |
| |
| /** Offset 0x120F - Reserved |
| **/ |
| UINT8 Reserved46[2]; |
| |
| /** Offset 0x1211 - GT Frequency Limit |
| 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, |
| 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: |
| 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, |
| 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, |
| 0x18: 1200 Mhz |
| 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz, |
| 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD: |
| 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz, |
| 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz, |
| 0x18: 1200 Mhz |
| **/ |
| UINT8 GtFreqMax; |
| |
| /** Offset 0x1212 - Reserved |
| **/ |
| UINT8 Reserved47[63]; |
| |
| /** Offset 0x1251 - Enable or Disable HWP |
| Enable/Disable Intel(R) Speed Shift Technology support. Enabling will expose the |
| CPPC v2 interface to allow for hardware controlled P-states. 0: Disable; <b>1: |
| Enable;</b> |
| $EN_DIS |
| **/ |
| UINT8 Hwp; |
| |
| /** Offset 0x1252 - Reserved |
| **/ |
| UINT8 Reserved48[7]; |
| |
| /** Offset 0x1259 - TCC Activation Offset |
| TCC Activation Offset. Offset from factory set TCC activation temperature at which |
| the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation |
| Temperature, in volts.For SKL Y SKU, the recommended default for this policy is |
| <b>10</b>, For all other SKUs the recommended default are <b>0</b> |
| **/ |
| UINT8 TccActivationOffset; |
| |
| /** Offset 0x125A - Reserved |
| **/ |
| UINT8 Reserved49[26]; |
| |
| /** Offset 0x1274 - Enable or Disable Energy Efficient Turbo |
| Enable/Disable Energy Efficient Turbo Feature. This feature will opportunistically |
| lower the turbo frequency to increase efficiency. Recommended only to disable in |
| overclocking situations where turbo frequency must remain constant. Otherwise, |
| leave enabled. <b>0: Disable</b>; 1: Enable |
| $EN_DIS |
| **/ |
| UINT8 EnergyEfficientTurbo; |
| |
| /** Offset 0x1275 - Reserved |
| **/ |
| UINT8 Reserved50[7]; |
| |
| /** Offset 0x127C - Enable or Disable CPU power states (C-states) |
| Enable/Disable CPU Power Management. Allows CPU to go to C states when it's not |
| 100% utilized. 0: Disable; <b>1: Enable</b> |
| $EN_DIS |
| **/ |
| UINT8 Cx; |
| |
| /** Offset 0x127D - Reserved |
| **/ |
| UINT8 Reserved51[181]; |
| |
| /** Offset 0x1332 - End of Post message |
| Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1): |
| EOP send in PEI, Send in DXE(0x2)(Default): EOP send in DXE |
| 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved |
| **/ |
| UINT8 EndOfPostMessage; |
| |
| /** Offset 0x1333 - Reserved |
| **/ |
| UINT8 Reserved52[21]; |
| |
| /** Offset 0x1348 - Enable LOCKDOWN SMI |
| Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. |
| $EN_DIS |
| **/ |
| UINT8 PchLockDownGlobalSmi; |
| |
| /** Offset 0x1349 - Enable LOCKDOWN BIOS Interface |
| Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register. |
| $EN_DIS |
| **/ |
| UINT8 PchLockDownBiosInterface; |
| |
| /** Offset 0x134A - Unlock all GPIO pads |
| Force all GPIO pads to be unlocked for debug purpose. |
| $EN_DIS |
| **/ |
| UINT8 PchUnlockGpioPads; |
| |
| /** Offset 0x134B - Reserved |
| **/ |
| UINT8 Reserved53; |
| |
| /** Offset 0x134C - PCIE RP Ltr Max Snoop Latency |
| Latency Tolerance Reporting, Max Snoop Latency. |
| **/ |
| UINT16 PcieRpLtrMaxSnoopLatency[24]; |
| |
| /** Offset 0x137C - PCIE RP Ltr Max No Snoop Latency |
| Latency Tolerance Reporting, Max Non-Snoop Latency. |
| **/ |
| UINT16 PcieRpLtrMaxNoSnoopLatency[24]; |
| |
| /** Offset 0x13AC - Reserved |
| **/ |
| UINT8 Reserved54[286]; |
| |
| /** Offset 0x14CA - PCH Energy Reporting |
| Disable/Enable PCH to CPU energy report feature. |
| $EN_DIS |
| **/ |
| UINT8 PchPmDisableEnergyReport; |
| |
| /** Offset 0x14CB - Reserved |
| **/ |
| UINT8 Reserved55[2]; |
| |
| /** Offset 0x14CD - Low Power Mode Enable/Disable config mask |
| Configure if respective S0i2/3 sub-states are to be supported. Each bit corresponds |
| to one sub-state (LPMx - BITx): LPM0-s0i2.0, LPM1-s0i2.1, LPM2-s0i2.2, LPM3-s0i3.0, |
| LPM4-s0i3.1, LPM5-s0i3.2, LPM6-s0i3.3, LPM7-s0i3.4. |
| **/ |
| UINT8 PmcLpmS0ixSubStateEnableMask; |
| |
| /** Offset 0x14CE - Reserved |
| **/ |
| UINT8 Reserved56[34]; |
| |
| /** Offset 0x14F0 - FspEventHandler |
| <b>Optional</b> pointer to the boot loader's implementation of FSP_EVENT_HANDLER. |
| **/ |
| UINT32 FspEventHandler; |
| |
| /** Offset 0x14F4 - Reserved |
| **/ |
| UINT8 Reserved57[20]; |
| } FSP_S_CONFIG; |
| |
| /** Fsp S UPD Configuration |
| **/ |
| typedef struct { |
| |
| /** Offset 0x0000 |
| **/ |
| FSP_UPD_HEADER FspUpdHeader; |
| |
| /** Offset 0x0020 |
| **/ |
| FSPS_ARCH_UPD FspsArchUpd; |
| |
| /** Offset 0x0040 |
| **/ |
| FSP_S_CONFIG FspsConfig; |
| |
| /** Offset 0x1508 |
| **/ |
| UINT8 UnusedUpdSpace42[6]; |
| |
| /** Offset 0x150E |
| **/ |
| UINT16 UpdTerminator; |
| } FSPS_UPD; |
| |
| #pragma pack() |
| |
| #endif |