| /* SPDX-License-Identifier: GPL-2.0-only */ |
| |
| #include <stdint.h> |
| #include <string.h> |
| #include <ec/google/chromeec/ec.h> |
| #include <northbridge/intel/haswell/raminit.h> |
| #include <southbridge/intel/lynxpoint/pch.h> |
| #include <southbridge/intel/lynxpoint/lp_gpio.h> |
| #include "../../onboard.h" |
| #include "../../variant.h" |
| |
| /* Copy SPD data for on-board memory */ |
| void copy_spd(struct pei_data *peid) |
| { |
| const int gpio_vector[] = {13, 9, 47, -1}; |
| |
| unsigned int spd_index = fill_spd_for_index(peid->spd_data[0], get_gpios(gpio_vector)); |
| |
| uint32_t board_version = PEPPY_BOARD_VERSION_PROTO; |
| google_chromeec_get_board_version(&board_version); |
| switch (board_version) { |
| case PEPPY_BOARD_VERSION_PROTO: |
| /* Index 0 is 2GB config with CH0 only. */ |
| if (spd_index == 0) |
| peid->dimm_channel1_disabled = 3; |
| else |
| memcpy(peid->spd_data[1], peid->spd_data[0], SPD_LEN); |
| break; |
| |
| case PEPPY_BOARD_VERSION_EVT: |
| default: |
| /* Index 0-3 are 4GB config with both CH0 and CH1. |
| * Index 4-7 are 2GB config with CH0 only. */ |
| if (spd_index > 3) |
| peid->dimm_channel1_disabled = 3; |
| else |
| memcpy(peid->spd_data[1], peid->spd_data[0], SPD_LEN); |
| break; |
| } |
| } |
| |
| const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = { |
| /* Length, Enable, OCn#, Location */ |
| { 0x0150, 1, USB_OC_PIN_SKIP, /* P0: LTE */ |
| USB_PORT_MINI_PCIE }, |
| { 0x0040, 1, 0, /* P1: Port A, CN10 */ |
| USB_PORT_BACK_PANEL }, |
| { 0x0080, 1, USB_OC_PIN_SKIP, /* P2: CCD */ |
| USB_PORT_INTERNAL }, |
| { 0x0040, 1, USB_OC_PIN_SKIP, /* P3: BT */ |
| USB_PORT_MINI_PCIE }, |
| { 0x0040, 1, 2, /* P4: Port B, CN6 */ |
| USB_PORT_BACK_PANEL }, |
| { 0x0000, 0, USB_OC_PIN_SKIP, /* P5: EMPTY */ |
| USB_PORT_SKIP }, |
| { 0x0150, 1, USB_OC_PIN_SKIP, /* P6: SD Card */ |
| USB_PORT_FLEX }, |
| { 0x0000, 0, USB_OC_PIN_SKIP, /* P7: EMPTY */ |
| USB_PORT_SKIP }, |
| }; |
| |
| const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = { |
| /* Enable, OCn# */ |
| { 1, 0 }, /* P1; Port A, CN6 */ |
| { 0, USB_OC_PIN_SKIP }, /* P2; */ |
| { 0, USB_OC_PIN_SKIP }, /* P3; */ |
| { 0, USB_OC_PIN_SKIP }, /* P4; */ |
| }; |