| # SPDX-License-Identifier: GPL-2.0-only |
| # This file is part of the coreboot project. |
| |
| config SOC_AMD_PICASSO |
| bool |
| help |
| AMD Picasso support |
| |
| if SOC_AMD_PICASSO |
| |
| config CPU_SPECIFIC_OPTIONS |
| def_bool y |
| select ARCH_BOOTBLOCK_X86_32 |
| select ARCH_VERSTAGE_X86_32 |
| select ARCH_ROMSTAGE_X86_32 |
| select ARCH_RAMSTAGE_X86_32 |
| select RESET_VECTOR_IN_RAM |
| select X86_AMD_FIXED_MTRRS |
| select X86_AMD_INIT_SIPI |
| select ACPI_AMD_HARDWARE_SLEEP_VALUES |
| select DRIVERS_I2C_DESIGNWARE |
| select GENERIC_GPIO_LIB |
| select IOAPIC |
| select HAVE_EM100_SUPPORT |
| select HAVE_USBDEBUG_OPTIONS |
| select TSC_MONOTONIC_TIMER |
| select SOC_AMD_COMMON_BLOCK_SPI |
| select TSC_SYNC_LFENCE |
| select UDELAY_TSC |
| select SOC_AMD_COMMON |
| select SOC_AMD_COMMON_BLOCK |
| select SOC_AMD_COMMON_BLOCK_IOMMU |
| select SOC_AMD_COMMON_BLOCK_ACPIMMIO |
| select SOC_AMD_COMMON_BLOCK_BANKED_GPIOS |
| select SOC_AMD_COMMON_BLOCK_ACPI |
| select SOC_AMD_COMMON_BLOCK_GRAPHICS |
| select SOC_AMD_COMMON_BLOCK_LPC |
| select SOC_AMD_COMMON_BLOCK_PCI |
| select SOC_AMD_COMMON_BLOCK_HDA |
| select SOC_AMD_COMMON_BLOCK_SATA |
| select SOC_AMD_COMMON_BLOCK_SMBUS |
| select SOC_AMD_COMMON_BLOCK_PSP_GEN2 |
| select BOOT_DEVICE_SUPPORTS_WRITES if BOOT_DEVICE_SPI_FLASH |
| select BOOT_DEVICE_SPI_FLASH_RW_NOMMAP_EARLY if BOOT_DEVICE_SPI_FLASH |
| select PARALLEL_MP |
| select PARALLEL_MP_AP_WORK |
| select HAVE_SMI_HANDLER |
| select SSE2 |
| select RTC |
| select PLATFORM_USES_FSP2_0 |
| select FSP_USES_CB_STACK |
| select UDK_2017_BINDING |
| select HAVE_CF9_RESET |
| |
| config AMD_FP5 |
| def_bool y if !AMD_FT5 |
| help |
| The FP5 package supports higher-wattage parts and dual channel DDR4 memory. |
| |
| config AMD_FT5 |
| def_bool n |
| help |
| The FT5 package supports low-power parts and single-channel DDR4 memory. |
| |
| config PRERAM_CBMEM_CONSOLE_SIZE |
| hex |
| default 0x1600 |
| help |
| Increase this value if preram cbmem console is getting truncated |
| |
| config CPU_ADDR_BITS |
| int |
| default 48 |
| |
| config MMCONF_BASE_ADDRESS |
| hex |
| default 0xF8000000 |
| |
| config MMCONF_BUS_NUMBER |
| int |
| default 64 |
| |
| config VGA_BIOS_ID |
| string |
| default "1002,15d8" |
| help |
| The default VGA BIOS PCI vendor/device ID should be set to the |
| result of the map_oprom_vendev() function in northbridge.c. |
| |
| config VGA_BIOS_FILE |
| string |
| default "3rdparty/blobs/soc/amd/picasso/PicassoGenericVbios.bin" |
| |
| config S3_VGA_ROM_RUN |
| bool |
| default n |
| |
| config HEAP_SIZE |
| hex |
| default 0xc0000 |
| |
| config EHCI_BAR |
| hex |
| default 0xfef00000 |
| |
| config SERIRQ_CONTINUOUS_MODE |
| bool |
| default n |
| help |
| Set this option to y for serial IRQ in continuous mode. |
| Otherwise it is in quiet mode. |
| |
| config PICASSO_ACPI_IO_BASE |
| hex |
| default 0x400 |
| help |
| Base address for the ACPI registers. |
| |
| config PICASSO_UART |
| bool "UART controller on Picasso" |
| default n |
| select DRIVERS_UART_8250MEM |
| select DRIVERS_UART_8250MEM_32 |
| select NO_UART_ON_SUPERIO |
| select UART_OVERRIDE_REFCLK |
| help |
| There are four memory-mapped UARTs controllers in Picasso at: |
| 0: 0xfedc9000 |
| 1: 0xfedca000 |
| 2: 0xfedc3000 |
| 3: 0xfedcf000 |
| |
| choice PICASSO_UART_CLOCK_SOURCE |
| prompt "UART Frequency" |
| depends on PICASSO_UART |
| default PICASSO_UART_48MZ |
| |
| config PICASSO_UART_48MZ |
| bool "48 MHz clock" |
| help |
| Select this option for the most compatibility. |
| |
| config PICASSO_UART_1_8MZ |
| bool "1.8432 MHz clock" |
| help |
| Select this option if an old payload or Linux ttyS0 arguments |
| require it. |
| |
| endchoice |
| |
| config PICASSO_UART_LEGACY |
| bool "Decode legacy I/O range" |
| depends on PICASSO_UART |
| help |
| Assign I/O 3F8, 2F8, etc. to a Picasso UART. Only a single UART may |
| decode legacy addresses and this option enables the one used for the |
| console. A UART accessed with I/O does not allow all the features |
| of MMIO. The MMIO decode is still present when this option is used. |
| |
| config CONSOLE_UART_BASE_ADDRESS |
| depends on CONSOLE_SERIAL && PICASSO_UART |
| hex |
| default 0xfedc9000 if UART_FOR_CONSOLE = 0 |
| default 0xfedca000 if UART_FOR_CONSOLE = 1 |
| default 0xfedc3000 if UART_FOR_CONSOLE = 2 |
| default 0xfedcf000 if UART_FOR_CONSOLE = 3 |
| |
| config SMM_TSEG_SIZE |
| hex |
| default 0x800000 if SMM_TSEG && HAVE_SMI_HANDLER |
| default 0x0 |
| |
| config SMM_RESERVED_SIZE |
| hex |
| default 0x150000 |
| |
| config SMM_MODULE_STACK_SIZE |
| hex |
| default 0x800 |
| |
| config ACPI_CPU_STRING |
| string |
| default "\\_PR.P%03d" |
| |
| config ACPI_BERT |
| bool "Build ACPI BERT Table" |
| default y |
| depends on HAVE_ACPI_TABLES |
| help |
| Report Machine Check errors identified in POST to the OS in an |
| ACPI Boot Error Record Table. This option reserves an 8MB region |
| for building the error structures. |
| |
| config ACPI_BERT_SIZE |
| hex |
| default 0x4000 |
| help |
| Specify the amount of DRAM reserved for gathering the data used to |
| generate the ACPI table. |
| |
| config CHROMEOS |
| select CHROMEOS_RAMOOPS_DYNAMIC |
| |
| config RO_REGION_ONLY |
| string |
| depends on CHROMEOS |
| default "apu/amdfw" |
| |
| config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ |
| int |
| default 150 |
| |
| config PICASSO_LPC_IOMUX |
| bool |
| help |
| Picasso's LPC bus signals are MUXed with some of the EMMC signals. |
| Select this option if LPC signals are required. |
| |
| config MAINBOARD_POWER_RESTORE |
| def_bool n |
| help |
| This option determines what state to go to once power is restored |
| after having been lost in S0. Select this option to automatically |
| return to S0. Otherwise the system will remain in S5 once power |
| is restored. |
| |
| config X86_RESET_VECTOR |
| hex |
| default 0x807fff0 |
| |
| config EARLYRAM_BSP_STACK_SIZE |
| hex |
| default 0x800 |
| |
| config FSP_TEMP_RAM_SIZE |
| hex |
| depends on FSP_USES_CB_STACK |
| default 0x40000 |
| help |
| The amount of coreboot-allocated heap and stack usage by the FSP. |
| |
| menu "PSP Configuration Options" |
| |
| config AMDFW_OUTSIDE_CBFS |
| bool |
| default n |
| help |
| The AMDFW (PSP) is typically locatable in cbfs. Select this |
| option to manually attach the generated amdfw.rom outside of |
| cbfs. The location is selected by the FWM position. |
| |
| config AMD_FWM_POSITION_INDEX |
| int "Firmware Directory Table location (0 to 5)" |
| range 0 5 |
| default 0 if BOARD_ROMSIZE_KB_512 |
| default 1 if BOARD_ROMSIZE_KB_1024 |
| default 2 if BOARD_ROMSIZE_KB_2048 |
| default 3 if BOARD_ROMSIZE_KB_4096 |
| default 4 if BOARD_ROMSIZE_KB_8192 |
| default 5 if BOARD_ROMSIZE_KB_16384 |
| help |
| Typically this is calculated by the ROM size, but there may |
| be situations where you want to put the firmware directory |
| table in a different location. |
| 0: 512 KB - 0xFFFA0000 |
| 1: 1 MB - 0xFFF20000 |
| 2: 2 MB - 0xFFE20000 |
| 3: 4 MB - 0xFFC20000 |
| 4: 8 MB - 0xFF820000 |
| 5: 16 MB - 0xFF020000 |
| |
| comment "AMD Firmware Directory Table set to location for 512KB ROM" |
| depends on AMD_FWM_POSITION_INDEX = 0 |
| comment "AMD Firmware Directory Table set to location for 1MB ROM" |
| depends on AMD_FWM_POSITION_INDEX = 1 |
| comment "AMD Firmware Directory Table set to location for 2MB ROM" |
| depends on AMD_FWM_POSITION_INDEX = 2 |
| comment "AMD Firmware Directory Table set to location for 4MB ROM" |
| depends on AMD_FWM_POSITION_INDEX = 3 |
| comment "AMD Firmware Directory Table set to location for 8MB ROM" |
| depends on AMD_FWM_POSITION_INDEX = 4 |
| comment "AMD Firmware Directory Table set to location for 16MB ROM" |
| depends on AMD_FWM_POSITION_INDEX = 5 |
| |
| config AMD_PUBKEY_FILE |
| string |
| default "3rdparty/blobs/soc/amd/picasso/PSP/AmdPubKeyRV.bin" |
| |
| config PSP_APCB_FILE |
| string |
| help |
| The name of the AGESA Parameter Customization Block. This image is |
| instance ID 0 in the PSP's BIOS Directory Table. |
| |
| config PSP_APCB1_FILE |
| string |
| help |
| If specified, this image is instance ID 1 in the PSP's BIOS |
| Directory Table. |
| |
| config PSP_APCB2_FILE |
| string |
| help |
| If specified, this image is instance ID 2 in the PSP's BIOS |
| Directory Table. |
| |
| config PSP_APCB3_FILE |
| string |
| help |
| If specified, this image is instance ID 3 in the PSP's BIOS |
| Directory Table. |
| |
| config PSP_APCB4_FILE |
| string |
| help |
| If specified, this image is instance ID 4 in the PSP's BIOS |
| Directory Table. |
| |
| config PSP_APOB_DESTINATION |
| hex |
| default 0x9f00000 |
| help |
| Location in DRAM where the PSP will copy the AGESA PSP Output |
| Block. |
| |
| config PSP_APOB_NV_ADDRESS |
| hex "Base address of APOB NV" |
| help |
| Location in flash where the PSP can find the S3 restore information. |
| Place this on a boundary that the flash device can erase. |
| |
| config PSP_APOB_NV_SIZE |
| hex "Size of APOB NV to be reserved" |
| help |
| Size of the S3 restore information. Make this a multiple of the |
| size the flash device can erase. |
| |
| config USE_PSPSCUREOS |
| bool |
| default y |
| help |
| Include the PspSecureOs and PspTrustlet binaries in the PSP build. |
| |
| If unsure, answer 'y' |
| |
| config PSP_LOAD_MP2_FW |
| bool |
| default n |
| help |
| Include the MP2 firmwares and configuration into the PSP build. |
| |
| If unsure, answer 'n' |
| |
| config PSP_LOAD_S0I3_FW |
| bool |
| default n |
| help |
| Select this item to include the S0i3 file into the PSP build. |
| |
| config HAVE_PSP_WHITELIST_FILE |
| bool "Include a debug whitelist file in PSP build" |
| default n |
| help |
| Support secured unlock prior to reset using a whitelisted |
| number? This feature requires a signed whitelist image and |
| bootloader from AMD. |
| |
| If unsure, answer 'n' |
| |
| config PSP_WHITELIST_FILE |
| string "Debug whitelist file name" |
| depends on HAVE_PSP_WHITELIST_FILE |
| default "3rdparty/blobs/soc/amd/picasso/PSP/wtl-rvn.sbin" |
| |
| config PSP_UNLOCK_SECURE_DEBUG |
| bool "Unlock secure debug" |
| default n |
| help |
| Select this item to enable secure debug options in PSP. |
| |
| endmenu |
| |
| endif # SOC_AMD_PICASSO |