| chip soc/intel/skylake |
| |
| # Enable deep Sx states |
| register "deep_s3_enable_ac" = "0" |
| register "deep_s3_enable_dc" = "0" |
| |
| # FSP Configuration |
| register "ScsEmmcHs400Enabled" = "0" |
| |
| register "serirq_mode" = "SERIRQ_CONTINUOUS" |
| |
| # VR Settings Configuration for 5 Domains |
| #+----------------+-------+-------+-------------+-------------+-------+ |
| #| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT | |
| #+----------------+-------+-------+-------------+-------------+-------+ |
| #| Psi1Threshold | 20A | 20A | 20A | 20A | 20A | |
| #| Psi2Threshold | 4A | 5A | 5A | 5A | 5A | |
| #| Psi3Threshold | 1A | 1A | 1A | 1A | 1A | |
| #| Psi3Enable | 1 | 1 | 1 | 1 | 1 | |
| #| Psi4Enable | 1 | 1 | 1 | 1 | 1 | |
| #| ImonSlope | 0 | 0 | 0 | 0 | 0 | |
| #| ImonOffset | 0 | 0 | 0 | 0 | 0 | |
| #| IccMax | Auto | Auto | Auto | Auto | Auto | |
| #| VrVoltageLimit*| 0 | 0 | 0 | 0 | 0 | |
| #+----------------+-------+-------+-------------+-------------+-------+ |
| #* VrVoltageLimit command not sent. |
| |
| register "domain_vr_config[VR_SYSTEM_AGENT]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(4), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 1, |
| .psi4enable = 1, |
| .imon_slope = 0, |
| .imon_offset = 0, |
| .icc_max = 0, |
| .voltage_limit = 0 |
| }" |
| |
| register "domain_vr_config[VR_IA_CORE]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(5), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 1, |
| .psi4enable = 1, |
| .imon_slope = 0, |
| .imon_offset = 0, |
| .icc_max = 0, |
| .voltage_limit = 0 |
| }" |
| |
| register "domain_vr_config[VR_GT_UNSLICED]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(5), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 1, |
| .psi4enable = 1, |
| .imon_slope = 0, |
| .imon_offset = 0, |
| .icc_max = 0, |
| .voltage_limit = 0 |
| }" |
| |
| register "domain_vr_config[VR_GT_SLICED]" = "{ |
| .vr_config_enable = 1, |
| .psi1threshold = VR_CFG_AMP(20), |
| .psi2threshold = VR_CFG_AMP(5), |
| .psi3threshold = VR_CFG_AMP(1), |
| .psi3enable = 1, |
| .psi4enable = 1, |
| .imon_slope = 0, |
| .imon_offset = 0, |
| .icc_max = 0, |
| .voltage_limit = 0 |
| }" |
| |
| # Enable Root port. |
| register "PcieRpEnable[3]" = "1" |
| register "PcieRpEnable[4]" = "1" |
| register "PcieRpEnable[8]" = "1" |
| register "PcieRpEnable[16]" = "1" |
| |
| # Enable CLKREQ# |
| register "PcieRpClkReqSupport[3]" = "1" |
| register "PcieRpClkReqSupport[4]" = "1" |
| register "PcieRpClkReqSupport[8]" = "1" |
| register "PcieRpClkReqSupport[16]" = "1" |
| |
| # SRCCLKREQ# |
| register "PcieRpClkReqNumber[3]" = "2" |
| register "PcieRpClkReqNumber[4]" = "1" |
| register "PcieRpClkReqNumber[8]" = "6" |
| register "PcieRpClkReqNumber[16]" = "7" |
| |
| register "usb2_ports[0]" = "USB2_PORT_MAX(OC2)" # Type-C Port |
| register "usb2_ports[1]" = "USB2_PORT_MAX(OC5)" # Front panel |
| register "usb2_ports[2]" = "USB2_PORT_MAX(OC4)" # Back panel |
| register "usb2_ports[3]" = "USB2_PORT_MAX(OC4)" # Back panel |
| register "usb2_ports[4]" = "USB2_PORT_MAX(OC1)" # Back panel-1 |
| register "usb2_ports[5]" = "USB2_PORT_MAX(OC1)" # Back panel |
| register "usb2_ports[6]" = "USB2_PORT_MAX(OC_SKIP)" # Back panel |
| register "usb2_ports[7]" = "USB2_PORT_MAX(OC_SKIP)" # Front panel |
| register "usb2_ports[8]" = "USB2_PORT_MAX(OC_SKIP)" # M.2 BT |
| register "usb2_ports[9]" = "USB2_PORT_MAX(OC2)" # Front panel |
| register "usb2_ports[10]" = "USB2_PORT_MAX(OC_SKIP)" # Back panel |
| register "usb2_ports[11]" = "USB2_PORT_MAX(OC_SKIP)" # Back panel-1 |
| register "usb2_ports[12]" = "USB2_PORT_MAX(OC3)" # Back panel |
| register "usb2_ports[13]" = "USB2_PORT_MAX(OC_SKIP)" # Back panel |
| |
| register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C Port |
| register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Back panel |
| register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Back panel |
| register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC0)" # Back panel-2 |
| register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Front Panel |
| register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Front Panel |
| register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC2)" # Front Panel |
| register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC2)" # Front Panel |
| register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC3)" # Back panel |
| register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)" # LAN |
| |
| register "SsicPortEnable" = "1" # Enable SSIC for WWAN |
| |
| register "SataSalpSupport" = "1" |
| register "SataPortsEnable" = "{ |
| [0] = 1, |
| [1] = 1, |
| [2] = 1, |
| [3] = 1, |
| [4] = 1, |
| [5] = 1, |
| [6] = 1, |
| [7] = 1, |
| }" |
| |
| # Must leave UART0 enabled or SD/eMMC will not work as PCI |
| register "SerialIoDevMode" = "{ |
| [PchSerialIoIndexI2C0] = PchSerialIoPci, |
| [PchSerialIoIndexI2C1] = PchSerialIoPci, |
| [PchSerialIoIndexI2C2] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C3] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C4] = PchSerialIoDisabled, |
| [PchSerialIoIndexI2C5] = PchSerialIoDisabled, |
| [PchSerialIoIndexSpi0] = PchSerialIoDisabled, |
| [PchSerialIoIndexSpi1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUart0] = PchSerialIoPci, |
| [PchSerialIoIndexUart1] = PchSerialIoDisabled, |
| [PchSerialIoIndexUart2] = PchSerialIoSkipInit, |
| }" |
| |
| # PL2 override 25W |
| register "power_limits_config" = "{ |
| .tdp_pl2_override = 25, |
| }" |
| |
| device domain 0 on |
| device pci 15.2 off end # I2C #2 |
| device pci 15.3 off end # I2C #3 |
| device pci 17.0 on end # SATA |
| device pci 19.2 off end # I2C #4 |
| device pci 1c.0 off end # PCI Express Port 1 |
| device pci 1c.2 on end # PCI Express Port 3 |
| device pci 1c.3 on end # PCI Express Port 4 |
| device pci 1c.4 on end # PCI Express Port 5 |
| device pci 1e.4 off end # eMMC |
| device pci 1e.6 off end # SDXC |
| device pci 1f.0 on |
| #chip drivers/pc80/tpm |
| # device pnp 0c31.0 on end |
| #end |
| end # LPC Interface |
| device pci 1f.6 on end # GbE |
| end |
| end |