| # SPDX-License-Identifier: GPL-2.0-or-later |
| |
| chip northbridge/intel/x4x # Northbridge |
| device cpu_cluster 0 on |
| ops x4x_cpu_bus_ops # APIC cluster |
| chip cpu/intel/socket_LGA775 |
| device lapic 0 on end |
| end |
| chip cpu/intel/model_1067x # CPU |
| device lapic 0xacac off end |
| end |
| end |
| device domain 0 on |
| ops x4x_pci_domain_ops # PCI domain |
| subsystemid 0x8086 0x0028 inherit |
| device pci 0.0 on end # Host Bridge |
| device pci 2.0 on end # Integrated graphics controller |
| device pci 2.1 on end # Integrated graphics controller 2 |
| device pci 3.0 off end # ME |
| device pci 3.1 off end # ME |
| chip southbridge/intel/i82801jx # Southbridge |
| register "gpe0_en" = "0x40" |
| |
| # Set AHCI mode. |
| register "sata_port_map" = "0x1f" |
| register "sata_clock_request" = "0" |
| |
| # Enable PCIe ports 0,2,3 as slots. |
| register "pcie_slot_implemented" = "0xb" |
| |
| register "gen1_dec" = "0x00fc0601" |
| register "gen2_dec" = "0x00fc0291" |
| |
| device pci 19.0 on end # GBE |
| device pci 1a.0 on end # USB |
| device pci 1a.1 on end # USB |
| device pci 1a.2 on end # USB |
| device pci 1a.7 on end # USB |
| device pci 1b.0 on end # Audio |
| device pci 1c.0 on end # PCIe 1 |
| device pci 1c.1 off end # PCIe 2 |
| device pci 1c.2 on end # PCIe 3 |
| device pci 1c.3 on end # PCIe 4 |
| device pci 1c.4 off end # PCIe 5 |
| device pci 1c.5 off end # PCIe 6 |
| device pci 1d.0 on end # USB |
| device pci 1d.1 on end # USB |
| device pci 1d.2 on end # USB |
| device pci 1d.7 on end # USB |
| device pci 1e.0 on end # PCI bridge |
| device pci 1f.0 on # LPC bridge |
| chip superio/winbond/w83627dhg # Super I/O |
| device pnp 2e.0 on # Floppy |
| # GLOBAL |
| io 0x60 = 0x3f0 |
| irq 0x70 = 6 |
| drq 0x74 = 2 |
| end |
| device pnp 2e.1 on # Parallel port |
| io 0x60 = 0x378 |
| irq 0x70 = 5 |
| drq 0x74 = 4 |
| end |
| device pnp 2e.2 on # COM 1 |
| io 0x60 = 0x3f8 |
| irq 0x70 = 4 |
| end |
| device pnp 2e.3 off end # COM 2 |
| device pnp 2e.5 on # Keyboard |
| io 0x60 = 0x60 |
| irq 0x70 = 1 |
| io 0x62 = 0x64 |
| irq 0xf0 = 0x85 |
| end |
| device pnp 2e.6 off end # SPI |
| device pnp 2e.7 on end # GPIO 6 |
| device pnp 2e.8 off end # WDTO# PLED |
| device pnp 2e.9 off end # GPIO 2 |
| device pnp 2e.109 on # GPIO 3 |
| irq 0xf0 = 0xfc |
| end |
| device pnp 2e.209 off end # GPIO 4 |
| device pnp 2e.309 on # GPIO 5 |
| irq 0xe0 = 0xde |
| irq 0xe1 = 0x01 |
| end |
| device pnp 2e.a on # ACPI |
| irq 0xe4 = 0x30 # power dram during S3 |
| end |
| device pnp 2e.b on # Hardware monitor |
| io 0x60 = 0x290 |
| end |
| device pnp 2e.c off end # PECI, SST |
| end |
| end |
| device pci 1f.1 on end # PATA/IDE |
| device pci 1f.2 on end # SATA |
| device pci 1f.3 on # SMBus |
| chip drivers/i2c/ck505 # SLG8XP549T |
| register "mask" = "{ 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, |
| 0xff, 0xff, 0xff, 0xff, 0xff }" |
| register "regs" = "{ 0x11, 0xd9, 0xff, 0xfd, |
| 0xff, 0x00, 0x00, 0x06, |
| 0x10, 0x05, 0x01, 0x80, 0x0d }" |
| device i2c 69 on end |
| end |
| end |
| device pci 1f.4 off end |
| device pci 1f.5 on end # IDE |
| device pci 1f.6 off end |
| end |
| end |
| end |