blob: 5d10628a6264948228ae043ea42450d4307dcc7e [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-or-later
chip northbridge/intel/x4x # Northbridge
device cpu_cluster 0 on
ops x4x_cpu_bus_ops # APIC cluster
chip cpu/intel/socket_LGA775
device lapic 0 on end
end
chip cpu/intel/model_1067x # CPU
device lapic 0xACAC off end
end
end
device domain 0 on
ops x4x_pci_domain_ops # PCI domain
subsystemid 0x1458 0x5000 inherit
device pci 0.0 on # Host Bridge
subsystemid 0x1849 0x2e30
end
device pci 1.0 on end # PEG
device pci 2.0 on # Integrated graphics controller
subsystemid 0x1849 0x2e32
end
device pci 3.0 off end # ME
device pci 3.1 off end # ME
chip southbridge/intel/i82801gx # Southbridge
register "pirqa_routing" = "0x0b"
register "pirqb_routing" = "0x0b"
register "pirqc_routing" = "0x0b"
register "pirqd_routing" = "0x0b"
register "pirqe_routing" = "0x80"
register "pirqf_routing" = "0x80"
register "pirqg_routing" = "0x80"
register "pirqh_routing" = "0x0b"
# GPI routing
# 0 No effect (default)
# 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
# 2 SCI (if corresponding GPIO_EN bit is also set)
register "gpi13_routing" = "2"
register "ide_enable_primary" = "0x1"
register "sata_ports_implemented" = "0x3"
register "gpe0_en" = "0x440"
register "gen1_dec" = "0x000c0291" # Superio HWM
device pci 1b.0 on # Audio
subsystemid 0x1849 0x3662
end
device pci 1c.0 on end # PCIe 1
device pci 1c.1 on end # PCIe 2
device pci 1c.2 off end # PCIe 3
device pci 1c.3 off end # PCIe 4
device pci 1d.0 on # USB
subsystemid 0x1849 0x27c8
end
device pci 1d.1 on # USB
subsystemid 0x1849 0x27c9
end
device pci 1d.2 on # USB
subsystemid 0x1849 0x27ca
end
device pci 1d.3 on # USB
subsystemid 0x1849 0x27cb
end
device pci 1d.7 on # USB
subsystemid 0x1849 0x27cc
end
device pci 1e.0 on end # PCI bridge
device pci 1e.2 off end # AC'97 Audio
device pci 1e.3 off end # AC'97 Modem
device pci 1f.0 on # ISA bridge
subsystemid 0x1849 0x27b8
chip superio/nuvoton/nct6776
device pnp 2e.0 off end # Floppy
device pnp 2e.1 on # Parallel port
# global
irq 0x1c = 0x80
irq 0x27 = 0x80
irq 0x2a = 0x60
# parallel port
io 0x60 = 0x378
irq 0x70 = 7
drq 0x74 = 3
end
device pnp 2e.2 on # COM1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 off end # COM2, IR
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
end
device pnp 2e.6 on # CIR
io 0x60 = 0x230
irq 0x70 = 3
end
device pnp 2e.7 off end # GPIO6-9
device pnp 2e.8 off end # WDT1, GPIO0, GPIO1, GPIOA
device pnp 2e.9 off end # GPIO2-5
device pnp 2e.a on # ACPI
irq 0xe0 = 0x03
irq 0xe4 = 0x10 # Power dram during s3
irq 0xe6 = 0x4c
irq 0xe9 = 0x02
irq 0xf0 = 0x20
end
device pnp 2e.b on # HWM, front panel LED
io 0x60 = 0x290
io 0x62 = 0x200
irq 0x70 = 0
end
device pnp 2e.d on end # VID
device pnp 2e.e on # CIR WAKE-UP
io 0x60 = 0x240
irq 0x70 = 0
end
device pnp 2e.f on end # GPIO Push-Pull or Open-drain
device pnp 2e.14 on end # SVID
device pnp 2e.16 on end # Deep Sleep
device pnp 2e.17 on end # GPIOA
end
end
device pci 1f.1 on # PATA/IDE
subsystemid 0x1849 0x27df
end
device pci 1f.2 on # SATA
subsystemid 0x1849 0x27c0
end
device pci 1f.3 on # SMbus
subsystemid 0x1849 0x27da
chip drivers/i2c/ck505 # W83115RG-965
# set SATA to fixed 100Mhz refclk
register "mask" = "{ 0x02 }"
register "regs" = "{ 0x02 }"
device i2c 69 on end
end
end
end
end
end