| config SOC_INTEL_ALDERLAKE |
| bool |
| help |
| Intel Alderlake support. Mainboards should specify the PCH |
| type using the `SOC_INTEL_ALDERLAKE_PCH_*` options instead |
| of selecting this option directly. |
| |
| config SOC_INTEL_ALDERLAKE_PCH_M |
| bool |
| select SOC_INTEL_ALDERLAKE |
| help |
| Choose this option if your mainboard has a PCH-M chipset. |
| |
| config SOC_INTEL_ALDERLAKE_PCH_N |
| bool |
| select SOC_INTEL_ALDERLAKE |
| help |
| Choose this option if your mainboard has a PCH-N chipset. |
| |
| config SOC_INTEL_ALDERLAKE_PCH_P |
| bool |
| select SOC_INTEL_ALDERLAKE |
| help |
| Choose this option if your mainboard has a PCH-P chipset. |
| |
| config SOC_INTEL_ALDERLAKE_PCH_S |
| bool |
| select SOC_INTEL_ALDERLAKE |
| help |
| Choose this option if your mainboard has a PCH-S chipset. |
| |
| if SOC_INTEL_ALDERLAKE |
| |
| config CPU_SPECIFIC_OPTIONS |
| def_bool y |
| select ACPI_INTEL_HARDWARE_SLEEP_VALUES |
| select ACPI_ADL_IPU_ES_SUPPORT |
| select ARCH_X86 |
| select BOOT_DEVICE_SUPPORTS_WRITES |
| select CACHE_MRC_SETTINGS |
| select CPU_INTEL_COMMON |
| select CPU_INTEL_FIRMWARE_INTERFACE_TABLE |
| select CPU_SUPPORTS_INTEL_TME |
| select CPU_SUPPORTS_PM_TIMER_EMULATION |
| select DISPLAY_FSP_VERSION_INFO |
| select DRIVERS_USB_ACPI |
| select FSP_COMPRESS_FSP_S_LZ4 |
| select FAST_SPI_SUPPORTS_EXT_BIOS_WINDOW |
| select FSP_M_XIP |
| select FSP_STATUS_GLOBAL_RESET_REQUIRED_3 |
| select FSP_USES_CB_DEBUG_EVENT_HANDLER |
| select FSPS_HAS_ARCH_UPD |
| select GENERIC_GPIO_LIB |
| select HAVE_DEBUG_RAM_SETUP |
| select HAVE_FSP_GOP |
| select INTEL_DESCRIPTOR_MODE_CAPABLE |
| select HAVE_SMI_HANDLER |
| select IDT_IN_EVERY_STAGE |
| select INTEL_GMA_ACPI |
| select INTEL_GMA_ADD_VBT if RUN_FSP_GOP |
| select INTEL_GMA_OPREGION_2_1 |
| select INTEL_TME |
| select MP_SERVICES_PPI_V2 |
| select MRC_SETTINGS_PROTECT |
| select PARALLEL_MP_AP_WORK |
| select MICROCODE_BLOB_UNDISCLOSED |
| select PLATFORM_USES_FSP2_2 if !SOC_INTEL_ALDERLAKE_PCH_S |
| select PLATFORM_USES_FSP2_3 if SOC_INTEL_ALDERLAKE_PCH_S |
| select PMC_GLOBAL_RESET_ENABLE_LOCK |
| select SOC_INTEL_COMMON |
| select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE |
| select SOC_INTEL_COMMON_BLOCK |
| select SOC_INTEL_COMMON_BLOCK_ACPI |
| select SOC_INTEL_COMMON_BLOCK_ACPI_CPPC |
| select SOC_INTEL_COMMON_BLOCK_ACPI_CPU_HYBRID |
| select SOC_INTEL_COMMON_BLOCK_ACPI_GPIO |
| select SOC_INTEL_COMMON_BLOCK_ACPI_PEP |
| select SOC_INTEL_COMMON_BLOCK_ACPI_PEP_LPM_REQ |
| select SOC_INTEL_COMMON_BLOCK_CAR |
| select SOC_INTEL_COMMON_BLOCK_CHIP_CONFIG |
| select SOC_INTEL_COMMON_BLOCK_CNVI |
| select SOC_INTEL_COMMON_BLOCK_CPU |
| select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT |
| select SOC_INTEL_COMMON_BLOCK_CPU_SMMRELOCATE |
| select SOC_INTEL_COMMON_BLOCK_DTT |
| select SOC_INTEL_COMMON_BLOCK_GPIO_DUAL_ROUTE_SUPPORT |
| select SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_SBI |
| select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2 |
| select SOC_INTEL_COMMON_BLOCK_SCS if SOC_INTEL_ALDERLAKE_PCH_N |
| select SOC_INTEL_COMMON_BLOCK_HDA |
| select SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PMC_IPC if DISABLE_HECI1_AT_PRE_BOOT |
| select SOC_INTEL_COMMON_BLOCK_IPU |
| select SOC_INTEL_COMMON_BLOCK_IRQ |
| select SOC_INTEL_COMMON_BLOCK_MEMINIT |
| select SOC_INTEL_COMMON_BLOCK_PCIE_RTD3 |
| select SOC_INTEL_COMMON_BLOCK_PMC_EPOC |
| select SOC_INTEL_COMMON_BLOCK_POWER_LIMIT |
| select SOC_INTEL_COMMON_BLOCK_SA |
| select SOC_INTEL_COMMON_BLOCK_SMM |
| select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP |
| select SOC_INTEL_COMMON_BLOCK_TCSS |
| select SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC |
| select SOC_INTEL_COMMON_BLOCK_USB4 |
| select SOC_INTEL_COMMON_BLOCK_USB4_PCIE |
| select SOC_INTEL_COMMON_BLOCK_USB4_XHCI |
| select SOC_INTEL_COMMON_BLOCK_XHCI |
| select SOC_INTEL_COMMON_BLOCK_XHCI_ELOG |
| select SOC_INTEL_COMMON_BASECODE |
| select SOC_INTEL_COMMON_FSP_RESET |
| select SOC_INTEL_COMMON_PCH_BASE |
| select SOC_INTEL_COMMON_RESET |
| select SOC_INTEL_CSE_SEND_EOP_EARLY |
| select SOC_INTEL_CSE_SET_EOP |
| select SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION |
| select SSE2 |
| select SUPPORT_CPU_UCODE_IN_CBFS |
| select TSC_MONOTONIC_TIMER |
| select UDELAY_TSC |
| select UDK_202005_BINDING |
| select USE_FSP_NOTIFY_PHASE_POST_PCI_ENUM |
| |
| config ALDERLAKE_CONFIGURE_DESCRIPTOR |
| bool |
| help |
| Select this if the descriptor needs to be updated at runtime. This |
| can only be done if the descriptor region is writable, and should only |
| be used as a temporary workaround. |
| |
| config ALDERLAKE_CAR_ENHANCED_NEM |
| bool |
| default y if !INTEL_CAR_NEM |
| select INTEL_CAR_NEM_ENHANCED |
| select CAR_HAS_SF_MASKS |
| select COS_MAPPED_TO_MSB |
| select CAR_HAS_L3_PROTECTED_WAYS |
| |
| config MAX_CPUS |
| int |
| default 24 |
| |
| config DCACHE_RAM_BASE |
| default 0xfef00000 |
| |
| config DCACHE_RAM_SIZE |
| default 0xc0000 |
| help |
| The size of the cache-as-ram region required during bootblock |
| and/or romstage. |
| |
| config DCACHE_BSP_STACK_SIZE |
| hex |
| default 0x80400 |
| help |
| The amount of anticipated stack usage in CAR by bootblock and |
| other stages. In the case of FSP_USES_CB_STACK default value will be |
| sum of FSP-M stack requirement(512KiB) and CB romstage stack requirement |
| (~1KiB). |
| |
| config FSP_TEMP_RAM_SIZE |
| hex |
| default 0x20000 |
| help |
| The amount of anticipated heap usage in CAR by FSP. |
| Refer to Platform FSP integration guide document to know |
| the exact FSP requirement for Heap setup. |
| |
| config CHIPSET_DEVICETREE |
| string |
| default "soc/intel/alderlake/chipset.cb" |
| |
| config EXT_BIOS_WIN_BASE |
| default 0xf8000000 |
| |
| config EXT_BIOS_WIN_SIZE |
| default 0x2000000 |
| |
| config IFD_CHIPSET |
| string |
| default "adl" |
| |
| config IED_REGION_SIZE |
| hex |
| default 0x400000 |
| |
| config HEAP_SIZE |
| hex |
| default 0x10000 |
| |
| # Intel recommends reserving the following resources per PCIe TBT root port, |
| # from ADL BIOS Spec (doc #627270) Revision 0.6.0 Section 7.2.5.1.5 |
| # - 42 buses |
| # - 194 MiB Non-prefetchable memory |
| # - 448 MiB Prefetchable memory |
| if SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES |
| |
| config PCIEXP_HOTPLUG_BUSES |
| int |
| default 42 |
| |
| config PCIEXP_HOTPLUG_MEM |
| hex |
| default 0xc200000 |
| |
| config PCIEXP_HOTPLUG_PREFETCH_MEM |
| hex |
| default 0x1c000000 |
| |
| endif # SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES |
| |
| config MAX_PCH_ROOT_PORTS |
| int |
| default 10 if SOC_INTEL_ALDERLAKE_PCH_M |
| default 12 if SOC_INTEL_ALDERLAKE_PCH_N |
| default 12 if SOC_INTEL_ALDERLAKE_PCH_P |
| |
| config MAX_CPU_ROOT_PORTS |
| int |
| default 1 if SOC_INTEL_ALDERLAKE_PCH_M |
| default 0 if SOC_INTEL_ALDERLAKE_PCH_N |
| default 3 if SOC_INTEL_ALDERLAKE_PCH_P |
| |
| config MAX_TBT_ROOT_PORTS |
| int |
| default 0 if SOC_INTEL_ALDERLAKE_PCH_N |
| default 2 if SOC_INTEL_ALDERLAKE_PCH_M |
| default 4 if SOC_INTEL_ALDERLAKE_PCH_P |
| |
| config MAX_ROOT_PORTS |
| int |
| default MAX_PCH_ROOT_PORTS |
| |
| config MAX_PCIE_CLOCK_SRC |
| int |
| default 6 if SOC_INTEL_ALDERLAKE_PCH_M |
| default 5 if SOC_INTEL_ALDERLAKE_PCH_N |
| default 7 if SOC_INTEL_ALDERLAKE_PCH_P |
| |
| config MAX_PCIE_CLOCK_REQ |
| int |
| default 6 if SOC_INTEL_ALDERLAKE_PCH_M |
| default 5 if SOC_INTEL_ALDERLAKE_PCH_N |
| default 10 if SOC_INTEL_ALDERLAKE_PCH_P |
| |
| config SMM_TSEG_SIZE |
| hex |
| default 0x800000 |
| |
| config SMM_RESERVED_SIZE |
| hex |
| default 0x200000 |
| |
| config PCR_BASE_ADDRESS |
| hex |
| default 0xfd000000 |
| help |
| This option allows you to select MMIO Base Address of sideband bus. |
| |
| config ECAM_MMCONF_BASE_ADDRESS |
| default 0xc0000000 |
| |
| config CPU_BCLK_MHZ |
| int |
| default 100 |
| |
| config SOC_INTEL_COMMON_BLOCK_GSPI_CLOCK_MHZ |
| int |
| default 120 |
| |
| config CPU_XTAL_HZ |
| default 38400000 |
| |
| config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ |
| int |
| default 133 |
| |
| config SOC_INTEL_COMMON_BLOCK_GSPI_MAX |
| int |
| default 7 |
| |
| config SOC_INTEL_I2C_DEV_MAX |
| int |
| default 8 |
| |
| config SOC_INTEL_UART_DEV_MAX |
| int |
| default 7 |
| |
| config CONSOLE_UART_BASE_ADDRESS |
| hex |
| default 0xfe03e000 |
| depends on INTEL_LPSS_UART_FOR_CONSOLE |
| |
| config VBT_DATA_SIZE_KB |
| int |
| default 9 |
| |
| # Clock divider parameters for 115200 baud rate |
| # Baudrate = (UART source clcok * M) /(N *16) |
| # ADL UART source clock: 120MHz |
| config SOC_INTEL_COMMON_LPSS_UART_CLK_M_VAL |
| hex |
| default 0x25a |
| |
| config SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL |
| hex |
| default 0x7fff |
| |
| config VBOOT |
| select VBOOT_SEPARATE_VERSTAGE |
| select VBOOT_MUST_REQUEST_DISPLAY |
| select VBOOT_STARTS_IN_BOOTBLOCK |
| select VBOOT_VBNV_CMOS |
| select VBOOT_VBNV_CMOS_BACKUP_TO_FLASH |
| select VBOOT_X86_SHA256_ACCELERATION |
| |
| # Default hash block size is 1KiB. Increasing it to 4KiB to improve |
| # hashing time as well as read time. This helps in improving |
| # boot time for Alder Lake. |
| config VBOOT_HASH_BLOCK_SIZE |
| hex |
| default 0x1000 |
| |
| config CBFS_SIZE |
| default 0x200000 |
| |
| config PRERAM_CBMEM_CONSOLE_SIZE |
| hex |
| default 0x2000 |
| |
| config FSP_HEADER_PATH |
| string "Location of FSP headers" |
| default "src/vendorcode/intel/fsp/fsp2_0/alderlake_n/" if SOC_INTEL_ALDERLAKE_PCH_N |
| default "src/vendorcode/intel/fsp/fsp2_0/alderlake/" |
| |
| config FSP_FD_PATH |
| string |
| depends on FSP_USE_REPO |
| default "3rdparty/fsp/AlderLakeFspBinPkg/Fsp.fd" |
| |
| config SOC_INTEL_ALDERLAKE_DEBUG_CONSENT |
| int "Debug Consent for ADL" |
| # USB DBC is more common for developers so make this default to 2 if |
| # SOC_INTEL_DEBUG_CONSENT=y |
| default 2 if SOC_INTEL_DEBUG_CONSENT |
| default 0 |
| help |
| This is to control debug interface on SOC. |
| Setting non-zero value will allow to use DBC or DCI to debug SOC. |
| PlatformDebugConsent in FspmUpd.h has the details. |
| |
| Desired platform debug type are |
| 0:Disabled, 2:Enabled (All Probes+TraceHub), 6:Enable (Low Power), |
| 7:Manual |
| |
| config DATA_BUS_WIDTH |
| int |
| default 128 |
| |
| config DIMMS_PER_CHANNEL |
| int |
| default 2 |
| |
| config MRC_CHANNEL_WIDTH |
| int |
| default 16 |
| |
| config ACPI_ADL_IPU_ES_SUPPORT |
| def_bool n |
| help |
| Enables ACPI entry to provide silicon type information to IPU kernel driver. |
| |
| if STITCH_ME_BIN |
| |
| config CSE_BPDT_VERSION |
| default "1.7" |
| |
| endif |
| |
| config SI_DESC_REGION |
| string "Descriptor Region name" |
| default "SI_DESC" |
| help |
| Name of Descriptor Region in the FMAP |
| |
| config SI_DESC_REGION_SZ |
| int |
| default 4096 |
| help |
| Size of Descriptor Region in the FMAP |
| |
| endif |