| /* |
| * This file is part of the coreboot project. |
| * |
| * Copyright (C) 2010 Advanced Micro Devices, Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; version 2 of the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <console/console.h> |
| #include <device/device.h> |
| #include <device/pci.h> |
| #include <arch/io.h> |
| #include <boot/tables.h> |
| #include <cpu/x86/msr.h> |
| #include <cpu/amd/mtrr.h> |
| #include <device/pci_def.h> |
| #include "southbridge/amd/sb700/sb700.h" |
| #include "southbridge/amd/sb700/smbus.h" |
| #include "chip.h" |
| |
| uint64_t uma_memory_base, uma_memory_size; |
| |
| void set_pcie_dereset(void); |
| void set_pcie_reset(void); |
| u8 is_dev3_present(void); |
| /* TODO - Need to find GPIO for PCIE slot. |
| * Kino uses GPIO ? as PCIe slot reset, GPIO? as GFX slot reset. We need to |
| * pull it up before training the slot. |
| ***/ |
| void set_pcie_dereset() |
| { |
| /* PCIE slot not yet supported.*/ |
| } |
| |
| void set_pcie_reset() |
| { |
| /* PCIE slot not yet supported.*/ |
| } |
| |
| u8 is_dev3_present(void) |
| { |
| return 0; |
| } |
| |
| /************************************************* |
| * enable the dedicated function in kino board. |
| * This function called early than rs780_enable. |
| *************************************************/ |
| static void kino_enable(device_t dev) |
| { |
| printk(BIOS_INFO, "Mainboard Kino Enable. dev=0x%p\n", dev); |
| |
| #if (CONFIG_GFXUMA == 1) |
| msr_t msr, msr2; |
| |
| /* TOP_MEM: the top of DRAM below 4G */ |
| msr = rdmsr(TOP_MEM); |
| printk |
| (BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n", |
| __func__, msr.lo, msr.hi); |
| |
| /* TOP_MEM2: the top of DRAM above 4G */ |
| msr2 = rdmsr(TOP_MEM2); |
| printk |
| (BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n", |
| __func__, msr2.lo, msr2.hi); |
| |
| /* refer to UMA Size Consideration in 780 BDG. */ |
| switch (msr.lo) { |
| case 0x10000000: /* 256M system memory */ |
| uma_memory_size = 0x4000000; /* 64M recommended UMA */ |
| break; |
| |
| case 0x20000000: /* 512M system memory */ |
| uma_memory_size = 0x8000000; /* 128M recommended UMA */ |
| break; |
| |
| default: /* 1GB and above system memory */ |
| uma_memory_size = 0x10000000; /* 256M recommended UMA */ |
| break; |
| } |
| |
| uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */ |
| printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n", |
| __func__, uma_memory_size, uma_memory_base); |
| |
| /* TODO: TOP_MEM2 */ |
| #else |
| uma_memory_size = 0x8000000; /* 128M recommended UMA */ |
| uma_memory_base = 0x38000000; /* 1GB system memory supposed */ |
| #endif |
| |
| set_pcie_dereset(); |
| /* get_ide_dma66(); */ |
| } |
| |
| int add_mainboard_resources(struct lb_memory *mem) |
| { |
| /* UMA is removed from system memory in the northbridge code, but |
| * in some circumstances we want the memory mentioned as reserved. |
| */ |
| #if (CONFIG_GFXUMA == 1) |
| printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n", |
| uma_memory_base, uma_memory_size); |
| lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base, |
| uma_memory_size); |
| #endif |
| return 0; |
| } |
| |
| struct chip_operations mainboard_ops = { |
| CHIP_NAME("IEI Kino-780AM2 Mainboard") |
| .enable_dev = kino_enable, |
| }; |