blob: 43984934bde6821fb9589480707e9501f171556e [file] [log] [blame]
Philipp Deppenwiesea9b58bb2015-02-05 23:22:57 +01001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.18.3-201.fc21.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.9.2 20141101 (Red Hat 4.9.2-1) (GCC) ) #1 SMP Mon Jan 19 15:59:31 UTC 2015
5[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.18.3-201.fc21.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.lvm.lv=fedora/root rd.luks.uuid=luks-c98cfbf3-ddd9-4787-bb0e-c5aebcaffa68 rhgb quiet LANG=en_US.UTF-8
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
11[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
13[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfe37fff] usable
15[ 0.000000] BIOS-e820: [mem 0x00000000bfe38000-0x00000000c29fffff] reserved
16[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023c5fffff] usable
18[ 0.000000] NX (Execute Disable) protection: active
19[ 0.000000] SMBIOS 2.7 present.
20[ 0.000000] DMI: LENOVO 2356GCG/2356GCG, BIOS CBET4000 4.0-8022-gc355306 02/05/2015
21[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
22[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
23[ 0.000000] e820: last_pfn = 0x23c600 max_arch_pfn = 0x400000000
24[ 0.000000] MTRR default type: write-back
25[ 0.000000] MTRR fixed ranges enabled:
26[ 0.000000] 00000-9FFFF write-back
27[ 0.000000] A0000-BFFFF uncachable
28[ 0.000000] C0000-FFFFF write-back
29[ 0.000000] MTRR variable ranges enabled:
30[ 0.000000] 0 base 0C0000000 mask FF0000000 uncachable
31[ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining
32[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
33[ 0.000000] 3 disabled
34[ 0.000000] 4 disabled
35[ 0.000000] 5 disabled
36[ 0.000000] 6 disabled
37[ 0.000000] 7 disabled
38[ 0.000000] 8 disabled
39[ 0.000000] 9 disabled
40[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
41[ 0.000000] e820: last_pfn = 0xbfe38 max_arch_pfn = 0x400000000
42[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
43[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
44[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
45[ 0.000000] BRK [0x02039000, 0x02039fff] PGTABLE
46[ 0.000000] BRK [0x0203a000, 0x0203afff] PGTABLE
47[ 0.000000] BRK [0x0203b000, 0x0203bfff] PGTABLE
48[ 0.000000] init_memory_mapping: [mem 0x23c400000-0x23c5fffff]
49[ 0.000000] [mem 0x23c400000-0x23c5fffff] page 2M
50[ 0.000000] BRK [0x0203c000, 0x0203cfff] PGTABLE
51[ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23c3fffff]
52[ 0.000000] [mem 0x23c000000-0x23c3fffff] page 2M
53[ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
54[ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
55[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
56[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
57[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
58[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
59[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
60[ 0.000000] init_memory_mapping: [mem 0x40200000-0xbfe37fff]
61[ 0.000000] [mem 0x40200000-0xbfdfffff] page 2M
62[ 0.000000] [mem 0xbfe00000-0xbfe37fff] page 4k
63[ 0.000000] BRK [0x0203d000, 0x0203dfff] PGTABLE
64[ 0.000000] BRK [0x0203e000, 0x0203efff] PGTABLE
65[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
66[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
67[ 0.000000] RAMDISK: [mem 0x35ae2000-0x36d68fff]
68[ 0.000000] ACPI: Early table checksum verification disabled
69[ 0.000000] ACPI: RSDP 0x00000000000F1F90 000024 (v02 CORE )
70[ 0.000000] ACPI: XSDT 0x00000000BFE560E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: FACP 0x00000000BFE59920 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: DSDT 0x00000000BFE56250 0036D0 (v02 COREv4 COREBOOT 20110725 INTL 20140114)
73[ 0.000000] ACPI: FACS 0x00000000BFE56210 000040
74[ 0.000000] ACPI: SSDT 0x00000000BFE59A20 0012D2 (v02 CORE COREBOOT 0000002A CORE 0000002A)
75[ 0.000000] ACPI: MCFG 0x00000000BFE5AD00 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
76[ 0.000000] ACPI: APIC 0x00000000BFE5AD40 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
77[ 0.000000] ACPI: HPET 0x00000000BFE5ADB0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
78[ 0.000000] ACPI: Local APIC address 0xfee00000
79[ 0.000000] No NUMA configuration found
80[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023c5fffff]
81[ 0.000000] NODE_DATA(0) allocated [mem 0x23c5e7000-0x23c5fafff]
82[ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233c00000-ffff88023bbfffff] on node 0
83[ 0.000000] Zone ranges:
84[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
85[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
86[ 0.000000] Normal [mem 0x100000000-0x23c5fffff]
87[ 0.000000] Movable zone start for each node
88[ 0.000000] Early memory node ranges
89[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
90[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
91[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
92[ 0.000000] node 0: [mem 0x40200000-0xbfe37fff]
93[ 0.000000] node 0: [mem 0x100000000-0x23c5fffff]
94[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23c5fffff]
95[ 0.000000] On node 0 totalpages: 2080726
96[ 0.000000] DMA zone: 64 pages used for memmap
97[ 0.000000] DMA zone: 21 pages reserved
98[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
99[ 0.000000] DMA32 zone: 12201 pages used for memmap
100[ 0.000000] DMA32 zone: 780856 pages, LIFO batch:31
101[ 0.000000] Normal zone: 20248 pages used for memmap
102[ 0.000000] Normal zone: 1295872 pages, LIFO batch:31
103[ 0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc29fffff
104[ 0.000000] ACPI: PM-Timer IO Port: 0x508
105[ 0.000000] ACPI: Local APIC address 0xfee00000
106[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
107[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
108[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
109[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
110[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
111[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
112[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
113[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
114[ 0.000000] ACPI: IRQ0 used by override.
115[ 0.000000] ACPI: IRQ9 used by override.
116[ 0.000000] Using ACPI (MADT) for SMP configuration information
117[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
118[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
119[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
120[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
121[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
122[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
123[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
124[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
125[ 0.000000] PM: Registered nosave memory: [mem 0xbfe38000-0xc29fffff]
126[ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
127[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
128[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
129[ 0.000000] e820: [mem 0xc2a00000-0xefffffff] available for PCI devices
130[ 0.000000] Booting paravirtualized kernel on bare hardware
131[ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
132[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88023c200000 s84480 r8192 d30208 u524288
133[ 0.000000] pcpu-alloc: s84480 r8192 d30208 u524288 alloc=1*2097152
134[ 0.000000] pcpu-alloc: [0] 0 1 2 3
135[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2048192
136[ 0.000000] Policy zone: Normal
137[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.18.3-201.fc21.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.lvm.lv=fedora/root rd.luks.uuid=luks-c98cfbf3-ddd9-4787-bb0e-c5aebcaffa68 rhgb quiet LANG=en_US.UTF-8
138[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
139[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
140[ 0.000000] Memory: 8089252K/8322904K available (7590K kernel code, 1235K rwdata, 3272K rodata, 1496K init, 1552K bss, 233652K reserved)
141[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
142[ 0.000000] Hierarchical RCU implementation.
143[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
144[ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4.
145[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
146[ 0.000000] NR_IRQS:65792 nr_irqs:456 0
147[ 0.000000] Offload RCU callbacks from all CPUs
148[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
149[ 0.000000] Console: colour dummy device 80x25
150[ 0.000000] console [tty0] enabled
151[ 0.000000] allocated 33554432 bytes of page_cgroup
152[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
153[ 0.000000] hpet clockevent registered
154[ 0.000000] tsc: Fast TSC calibration using PIT
155[ 0.000000] tsc: Detected 2893.462 MHz processor
156[ 0.000038] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.92 BogoMIPS (lpj=2893462)
157[ 0.000040] pid_max: default: 32768 minimum: 301
158[ 0.000046] ACPI: Core revision 20140926
159[ 0.002258] ACPI: All ACPI Tables successfully acquired
160[ 0.002375] Security Framework initialized
161[ 0.002381] SELinux: Initializing.
162[ 0.002386] SELinux: Starting in permissive mode
163[ 0.002886] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
164[ 0.004639] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
165[ 0.005405] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
166[ 0.005416] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
167[ 0.005582] Initializing cgroup subsys memory
168[ 0.005586] Initializing cgroup subsys devices
169[ 0.005588] Initializing cgroup subsys freezer
170[ 0.005589] Initializing cgroup subsys net_cls
171[ 0.005591] Initializing cgroup subsys blkio
172[ 0.005593] Initializing cgroup subsys perf_event
173[ 0.005594] Initializing cgroup subsys net_prio
174[ 0.005596] Initializing cgroup subsys hugetlb
175[ 0.005616] CPU: Physical Processor ID: 0
176[ 0.005616] CPU: Processor Core ID: 0
177[ 0.005926] mce: CPU supports 7 MCE banks
178[ 0.005935] CPU0: Thermal monitoring enabled (TM1)
179[ 0.005944] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
180Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
181[ 0.006054] Freeing SMP alternatives memory: 28K (ffffffff81eac000 - ffffffff81eb3000)
182[ 0.006987] ftrace: allocating 27458 entries in 108 pages
183[ 0.018536] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
184[ 0.028542] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (fam: 06, model: 3a, stepping: 09)
185[ 0.028548] TSC deadline timer enabled
186[ 0.028566] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
187[ 0.028583] ... version: 3
188[ 0.028583] ... bit width: 48
189[ 0.028584] ... generic registers: 4
190[ 0.028585] ... value mask: 0000ffffffffffff
191[ 0.028586] ... max period: 0000ffffffffffff
192[ 0.028586] ... fixed-purpose events: 3
193[ 0.028587] ... event mask: 000000070000000f
194[ 0.029763] x86: Booting SMP configuration:
195[ 0.029764] .... node #0, CPUs: #1
196[ 0.043243] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
197[ 0.043338] #2 #3
198[ 0.070499] x86: Booted up 1 node, 4 CPUs
199[ 0.070502] smpboot: Total of 4 processors activated (23147.69 BogoMIPS)
200[ 0.073846] devtmpfs: initialized
201[ 0.077130] atomic64_test: passed for x86-64 platform with CX8 and with SSE
202[ 0.077133] pinctrl core: initialized pinctrl subsystem
203[ 0.077170] RTC time: 22:14:49, date: 02/05/15
204[ 0.077253] NET: Registered protocol family 16
205[ 0.079691] cpuidle: using governor menu
206[ 0.079790] ACPI: bus type PCI registered
207[ 0.079791] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
208[ 0.079857] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
209[ 0.079859] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
210[ 0.079930] PCI: Using configuration type 1 for base access
211[ 0.084012] ACPI: Added _OSI(Module Device)
212[ 0.084014] ACPI: Added _OSI(Processor Device)
213[ 0.084015] ACPI: Added _OSI(3.0 _SCP Extensions)
214[ 0.084016] ACPI: Added _OSI(Processor Aggregator Device)
215[ 0.086161] ACPI: Interpreter enabled
216[ 0.086165] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
217[ 0.086169] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
218[ 0.086179] ACPI: (supports S0 S3 S4 S5)
219[ 0.086180] ACPI: Using IOAPIC for interrupt routing
220[ 0.086195] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
221[ 0.091275] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
222[ 0.091280] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
223[ 0.091314] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
224[ 0.091381] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
225[ 0.091484] PCI host bridge to bus 0000:00
226[ 0.091486] pci_bus 0000:00: root bus resource [bus 00-ff]
227[ 0.091488] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
228[ 0.091489] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
229[ 0.091491] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
230[ 0.091492] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
231[ 0.091493] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
232[ 0.091494] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
233[ 0.091496] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
234[ 0.091497] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
235[ 0.091498] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
236[ 0.091499] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
237[ 0.091501] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
238[ 0.091502] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
239[ 0.091503] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
240[ 0.091504] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
241[ 0.091505] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
242[ 0.091507] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
243[ 0.091508] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xfebfffff]
244[ 0.091509] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
245[ 0.091516] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
246[ 0.091585] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
247[ 0.091594] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
248[ 0.091599] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
249[ 0.091602] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
250[ 0.091680] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
251[ 0.091705] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
252[ 0.091775] pci 0000:00:14.0: PME# supported from D3hot D3cold
253[ 0.091803] pci 0000:00:14.0: System wakeup disabled by ACPI
254[ 0.091841] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
255[ 0.091857] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
256[ 0.091866] pci 0000:00:19.0: reg 0x14: [mem 0xe0634000-0xe0634fff]
257[ 0.091874] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
258[ 0.091935] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
259[ 0.091992] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
260[ 0.092012] pci 0000:00:1a.0: reg 0x10: [mem 0xe0635800-0xe0635bff]
261[ 0.092099] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
262[ 0.092127] pci 0000:00:1a.0: System wakeup disabled by ACPI
263[ 0.092160] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
264[ 0.092176] pci 0000:00:1b.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit]
265[ 0.092248] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
266[ 0.092275] pci 0000:00:1b.0: System wakeup disabled by ACPI
267[ 0.092312] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
268[ 0.092449] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
269[ 0.092520] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
270[ 0.092656] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
271[ 0.092737] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
272[ 0.092757] pci 0000:00:1d.0: reg 0x10: [mem 0xe0635c00-0xe0635fff]
273[ 0.092844] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
274[ 0.092873] pci 0000:00:1d.0: System wakeup disabled by ACPI
275[ 0.092906] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
276[ 0.093057] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
277[ 0.093076] pci 0000:00:1f.2: reg 0x10: [io 0x1880-0x1887]
278[ 0.093084] pci 0000:00:1f.2: reg 0x14: [io 0x1890-0x1893]
279[ 0.093092] pci 0000:00:1f.2: reg 0x18: [io 0x1888-0x188f]
280[ 0.093100] pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897]
281[ 0.093107] pci 0000:00:1f.2: reg 0x20: [io 0x1860-0x187f]
282[ 0.093116] pci 0000:00:1f.2: reg 0x24: [mem 0xe0635000-0xe06357ff]
283[ 0.093164] pci 0000:00:1f.2: PME# supported from D3hot
284[ 0.093214] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
285[ 0.093230] pci 0000:00:1f.3: reg 0x10: [mem 0xe0636000-0xe06360ff 64bit]
286[ 0.093249] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
287[ 0.093530] pci 0000:01:00.0: [8086:0085] type 00 class 0x028000
288[ 0.093716] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit]
289[ 0.094485] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
290[ 0.096858] pci 0000:00:1c.0: PCI bridge to [bus 01]
291[ 0.096867] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
292[ 0.097035] pci 0000:02:00.0: [1180:e823] type 00 class 0x080500
293[ 0.097067] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
294[ 0.097104] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe05000ff]
295[ 0.097406] pci 0000:02:00.0: supports D1 D2
296[ 0.097407] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
297[ 0.099003] pci 0000:00:1c.1: PCI bridge to [bus 02]
298[ 0.099009] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
299[ 0.099309] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
300[ 0.099345] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
301[ 0.099377] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
302[ 0.099409] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
303[ 0.099440] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
304[ 0.099472] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
305[ 0.099503] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
306[ 0.099535] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
307[ 0.099919] ACPI: Enabled 1 GPEs in block 00 to 3F
308[ 0.099957] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
309[ 0.100035] vgaarb: setting as boot device: PCI:0000:00:02.0
310[ 0.100037] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
311[ 0.100039] vgaarb: loaded
312[ 0.100040] vgaarb: bridge control possible 0000:00:02.0
313[ 0.100100] SCSI subsystem initialized
314[ 0.100132] libata version 3.00 loaded.
315[ 0.100155] ACPI: bus type USB registered
316[ 0.100170] usbcore: registered new interface driver usbfs
317[ 0.100176] usbcore: registered new interface driver hub
318[ 0.100190] usbcore: registered new device driver usb
319[ 0.100270] PCI: Using ACPI for IRQ routing
320[ 0.101771] PCI: pci_cache_line_size set to 64 bytes
321[ 0.102220] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
322[ 0.102222] e820: reserve RAM buffer [mem 0xbfe38000-0xbfffffff]
323[ 0.102223] e820: reserve RAM buffer [mem 0x23c600000-0x23fffffff]
324[ 0.102311] NetLabel: Initializing
325[ 0.102312] NetLabel: domain hash size = 128
326[ 0.102313] NetLabel: protocols = UNLABELED CIPSOv4
327[ 0.102323] NetLabel: unlabeled traffic allowed by default
328[ 0.102379] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
329[ 0.102383] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
330[ 0.104409] Switched to clocksource hpet
331[ 0.109439] pnp: PnP ACPI init
332[ 0.109517] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
333[ 0.109519] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
334[ 0.109521] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
335[ 0.109522] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
336[ 0.109524] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
337[ 0.109525] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
338[ 0.109527] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
339[ 0.109528] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
340[ 0.109531] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
341[ 0.109532] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
342[ 0.109535] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
343[ 0.109934] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
344[ 0.109937] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
345[ 0.109966] system 00:02: [io 0x0500-0x057f] could not be reserved
346[ 0.109968] system 00:02: [io 0x0480-0x04bf] has been reserved
347[ 0.109969] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
348[ 0.109986] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
349[ 0.110015] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
350[ 0.110037] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
351[ 0.110047] pnp: PnP ACPI: found 6 devices
352[ 0.116290] pci 0000:00:1c.0: PCI bridge to [bus 01]
353[ 0.116297] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
354[ 0.116309] pci 0000:00:1c.1: PCI bridge to [bus 02]
355[ 0.116316] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
356[ 0.116328] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
357[ 0.116329] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
358[ 0.116331] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
359[ 0.116332] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
360[ 0.116333] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
361[ 0.116334] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
362[ 0.116336] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
363[ 0.116337] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
364[ 0.116338] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
365[ 0.116339] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
366[ 0.116341] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
367[ 0.116342] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
368[ 0.116343] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
369[ 0.116344] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
370[ 0.116346] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
371[ 0.116347] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
372[ 0.116348] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xfebfffff]
373[ 0.116350] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
374[ 0.116351] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
375[ 0.116353] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
376[ 0.116375] NET: Registered protocol family 2
377[ 0.116527] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
378[ 0.116655] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
379[ 0.116766] TCP: Hash tables configured (established 65536 bind 65536)
380[ 0.116778] TCP: reno registered
381[ 0.116787] UDP hash table entries: 4096 (order: 5, 131072 bytes)
382[ 0.116812] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
383[ 0.116862] NET: Registered protocol family 1
384[ 0.116874] pci 0000:00:02.0: Video device with shadowed ROM
385[ 0.117296] PCI: CLS 64 bytes, default 64
386[ 0.117344] Unpacking initramfs...
387[ 0.345179] Freeing initrd memory: 18972K (ffff880035ae2000 - ffff880036d69000)
388[ 0.345211] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
389[ 0.345213] software IO TLB [mem 0xbbe38000-0xbfe38000] (64MB) mapped at [ffff8800bbe38000-ffff8800bfe37fff]
390[ 0.345398] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
391[ 0.345499] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
392[ 0.345506] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
393[ 0.345510] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b
394[ 0.345516] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b
395[ 0.345574] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
396[ 0.345900] AVX version of gcm_enc/dec engaged.
397[ 0.345902] AES CTR mode by8 optimization enabled
398[ 0.347639] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
399[ 0.348001] futex hash table entries: 1024 (order: 4, 65536 bytes)
400[ 0.348014] Initialise system trusted keyring
401[ 0.348034] audit: initializing netlink subsys (disabled)
402[ 0.348048] audit: type=2000 audit(1423174489.336:1): initialized
403[ 0.348353] HugeTLB registered 2 MB page size, pre-allocated 0 pages
404[ 0.349443] zpool: loaded
405[ 0.349446] zbud: loaded
406[ 0.349610] VFS: Disk quotas dquot_6.5.2
407[ 0.349635] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
408[ 0.349895] msgmni has been set to 15836
409[ 0.349938] Key type big_key registered
410[ 0.349941] SELinux: Registering netfilter hooks
411[ 0.350749] alg: No test for stdrng (krng)
412[ 0.350760] NET: Registered protocol family 38
413[ 0.350768] Key type asymmetric registered
414[ 0.350771] Asymmetric key parser 'x509' registered
415[ 0.350809] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
416[ 0.350846] io scheduler noop registered
417[ 0.350849] io scheduler deadline registered
418[ 0.350875] io scheduler cfq registered (default)
419[ 0.351042] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
420[ 0.351201] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
421[ 0.351317] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
422[ 0.351318] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
423[ 0.351324] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
424[ 0.351344] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
425[ 0.351345] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
426[ 0.351350] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
427[ 0.351361] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
428[ 0.351372] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
429[ 0.351404] vesafb: mode is 1600x900x32, linelength=6400, pages=0
430[ 0.351404] vesafb: scrolling: redraw
431[ 0.351406] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
432[ 0.351418] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004e80000, using 5632k, total 5632k
433[ 0.351489] Console: switching to colour frame buffer device 200x56
434[ 0.353667] fb0: VESA VGA frame buffer device
435[ 0.353679] intel_idle: MWAIT substates: 0x21120
436[ 0.353680] intel_idle: v0.4 model 0x3A
437[ 0.353681] intel_idle: lapic_timer_reliable_states 0xffffffff
438[ 0.354003] ACPI: AC Adapter [AC] (off-line)
439[ 0.354064] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0E:00/input/input0
440[ 0.354067] ACPI: Sleep Button [SLPB]
441[ 0.354115] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0D:00/input/input1
442[ 0.354241] ACPI: Lid Switch [LID]
443[ 0.354272] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
444[ 0.354274] ACPI: Power Button [PWRF]
445[ 0.355157] thermal LNXTHERM:00: registered as thermal_zone0
446[ 0.355158] ACPI: Thermal Zone [THM0] (45 C)
447[ 0.355677] thermal LNXTHERM:01: registered as thermal_zone1
448[ 0.355678] ACPI: Thermal Zone [THM1] (27 C)
449[ 0.355702] GHES: HEST is not enabled!
450[ 0.355796] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
451[ 0.356384] Non-volatile memory driver v1.3
452[ 0.356389] Linux agpgart interface v0.103
453[ 0.356514] ahci 0000:00:1f.2: version 3.0
454[ 0.356609] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
455[ 0.356626] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
456[ 0.356663] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode
457[ 0.356665] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
458[ 0.357190] scsi host0: ahci
459[ 0.357337] scsi host1: ahci
460[ 0.357459] scsi host2: ahci
461[ 0.357587] scsi host3: ahci
462[ 0.357711] scsi host4: ahci
463[ 0.357834] scsi host5: ahci
464[ 0.357874] ata1: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635100 irq 26
465[ 0.357877] ata2: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635180 irq 26
466[ 0.357879] ata3: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635200 irq 26
467[ 0.357879] ata4: DUMMY
468[ 0.357882] ata5: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635300 irq 26
469[ 0.357883] ata6: DUMMY
470[ 0.357961] libphy: Fixed MDIO Bus: probed
471[ 0.358141] xhci_hcd 0000:00:14.0: xHCI Host Controller
472[ 0.358191] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
473[ 0.358301] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
474[ 0.358322] xhci_hcd 0000:00:14.0: irq 27 for MSI/MSI-X
475[ 0.358392] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
476[ 0.358394] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
477[ 0.358395] usb usb1: Product: xHCI Host Controller
478[ 0.358396] usb usb1: Manufacturer: Linux 3.18.3-201.fc21.x86_64 xhci-hcd
479[ 0.358397] usb usb1: SerialNumber: 0000:00:14.0
480[ 0.358506] hub 1-0:1.0: USB hub found
481[ 0.358520] hub 1-0:1.0: 4 ports detected
482[ 0.358623] xhci_hcd 0000:00:14.0: xHCI Host Controller
483[ 0.358665] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
484[ 0.358694] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
485[ 0.358696] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
486[ 0.358697] usb usb2: Product: xHCI Host Controller
487[ 0.358698] usb usb2: Manufacturer: Linux 3.18.3-201.fc21.x86_64 xhci-hcd
488[ 0.358699] usb usb2: SerialNumber: 0000:00:14.0
489[ 0.358776] hub 2-0:1.0: USB hub found
490[ 0.358785] hub 2-0:1.0: 4 ports detected
491[ 0.358878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
492[ 0.358885] ehci-pci: EHCI PCI platform driver
493[ 0.358952] ehci-pci 0000:00:1a.0: EHCI Host Controller
494[ 0.358986] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
495[ 0.359004] ehci-pci 0000:00:1a.0: debug port 2
496[ 0.362898] ACPI: Battery Slot [BAT0] (battery present)
497[ 0.362899] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
498[ 0.362910] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0635800
499[ 0.362994] ACPI: Battery Slot [BAT1] (battery absent)
500[ 0.368494] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
501[ 0.368525] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
502[ 0.368526] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
503[ 0.368528] usb usb3: Product: EHCI Host Controller
504[ 0.368529] usb usb3: Manufacturer: Linux 3.18.3-201.fc21.x86_64 ehci_hcd
505[ 0.368530] usb usb3: SerialNumber: 0000:00:1a.0
506[ 0.368614] hub 3-0:1.0: USB hub found
507[ 0.368619] hub 3-0:1.0: 3 ports detected
508[ 0.368766] ehci-pci 0000:00:1d.0: EHCI Host Controller
509[ 0.368805] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
510[ 0.368816] ehci-pci 0000:00:1d.0: debug port 2
511[ 0.372728] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
512[ 0.372739] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0635c00
513[ 0.378505] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
514[ 0.378538] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
515[ 0.378539] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
516[ 0.378541] usb usb4: Product: EHCI Host Controller
517[ 0.378542] usb usb4: Manufacturer: Linux 3.18.3-201.fc21.x86_64 ehci_hcd
518[ 0.378543] usb usb4: SerialNumber: 0000:00:1d.0
519[ 0.378633] hub 4-0:1.0: USB hub found
520[ 0.378637] hub 4-0:1.0: 3 ports detected
521[ 0.378732] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
522[ 0.378736] ohci-pci: OHCI PCI platform driver
523[ 0.378744] uhci_hcd: USB Universal Host Controller Interface driver
524[ 0.378777] usbcore: registered new interface driver usbserial
525[ 0.378782] usbcore: registered new interface driver usbserial_generic
526[ 0.378787] usbserial: USB Serial support registered for generic
527[ 0.378812] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
528[ 0.380404] serio: i8042 KBD port at 0x60,0x64 irq 1
529[ 0.380407] serio: i8042 AUX port at 0x60,0x64 irq 12
530[ 0.380535] mousedev: PS/2 mouse device common for all mice
531[ 0.381031] rtc_cmos 00:03: RTC can wake from S4
532[ 0.381180] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
533[ 0.381209] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
534[ 0.381261] device-mapper: uevent: version 1.0.3
535[ 0.381353] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
536[ 0.381457] Intel P-state driver initializing.
537[ 0.381757] hidraw: raw HID events driver (C) Jiri Kosina
538[ 0.382004] usbcore: registered new interface driver usbhid
539[ 0.382007] usbhid: USB HID core driver
540[ 0.382119] drop_monitor: Initializing network drop monitor service
541[ 0.382241] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
542[ 0.382262] ip_tables: (C) 2000-2006 Netfilter Core Team
543[ 0.382337] TCP: cubic registered
544[ 0.382351] Initializing XFRM netlink socket
545[ 0.382555] NET: Registered protocol family 10
546[ 0.382931] mip6: Mobile IPv6
547[ 0.382940] NET: Registered protocol family 17
548[ 0.383640] Loading compiled-in X.509 certificates
549[ 0.385424] Loaded X.509 cert 'Fedora kernel signing key: 87785d8e20a1942715f3975699e52d3f2ef57b7d'
550[ 0.385459] registered taskstats version 1
551[ 0.386197] Magic number: 3:851:248
552[ 0.386314] rtc_cmos 00:03: setting system clock to 2015-02-05 22:14:50 UTC (1423174490)
553[ 0.386414] PM: Hibernation image not present or could not be loaded.
554[ 0.662673] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
555[ 0.663516] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
556[ 0.663522] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
557[ 0.663525] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
558[ 0.664027] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
559[ 0.664037] ata1.00: configured for UDMA/133
560[ 0.665986] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5
561[ 0.666638] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
562[ 0.666640] sd 0:0:0:0: Attached scsi generic sg0 type 0
563[ 0.666964] sd 0:0:0:0: [sda] Write Protect is off
564[ 0.666971] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
565[ 0.667148] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
566[ 0.668397] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
567[ 0.669480] sd 0:0:0:0: [sda] Attached SCSI disk
568[ 0.670602] usb 3-1: new high-speed USB device number 2 using ehci-pci
569[ 0.680706] usb 4-1: new high-speed USB device number 2 using ehci-pci
570[ 0.785431] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
571[ 0.785438] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
572[ 0.786035] hub 3-1:1.0: USB hub found
573[ 0.786296] hub 3-1:1.0: 6 ports detected
574[ 0.795428] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
575[ 0.795434] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
576[ 0.795814] hub 4-1:1.0: USB hub found
577[ 0.796025] hub 4-1:1.0: 8 ports detected
578[ 0.971755] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
579[ 1.017885] ata2.00: ATA-8: WDC WD3200BEVT-75ZCT2, 11.01A11, max UDMA/133
580[ 1.017892] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
581[ 1.020708] ata2.00: configured for UDMA/133
582[ 1.020995] scsi 1:0:0:0: Direct-Access ATA WDC WD3200BEVT-7 1A11 PQ: 0 ANSI: 5
583[ 1.021445] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
584[ 1.021536] sd 1:0:0:0: Attached scsi generic sg1 type 0
585[ 1.021718] sd 1:0:0:0: [sdb] Write Protect is off
586[ 1.021724] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
587[ 1.021780] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
588[ 1.024557] sdb: sdb1
589[ 1.025280] sd 1:0:0:0: [sdb] Attached SCSI disk
590[ 1.061971] usb 3-1.3: new full-speed USB device number 3 using ehci-pci
591[ 1.148392] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020
592[ 1.148399] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
593[ 1.148402] usb 3-1.3: Product: Biometric Coprocessor
594[ 1.148405] usb 3-1.3: Manufacturer: Auth
595[ 1.180455] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262
596[ 1.180466] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
597[ 1.220266] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
598[ 1.222030] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
599[ 1.311276] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
600[ 1.311283] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
601[ 1.311286] usb 3-1.4: Product: BCM20702A0
602[ 1.311289] usb 3-1.4: Manufacturer: Broadcom Corp
603[ 1.311292] usb 3-1.4: SerialNumber: 083E8EE34B9A
604[ 1.326788] ata3: SATA link down (SStatus 0 SControl 300)
605[ 1.345852] tsc: Refined TSC clocksource calibration: 2893.427 MHz
606[ 1.385005] usb 3-1.6: new high-speed USB device number 5 using ehci-pci
607[ 1.478247] usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b2da
608[ 1.478254] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
609[ 1.478257] usb 3-1.6: Product: Integrated Camera
610[ 1.478260] usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd.
611[ 1.631918] ata5: SATA link down (SStatus 0 SControl 300)
612[ 1.634066] Freeing unused kernel memory: 1496K (ffffffff81d36000 - ffffffff81eac000)
613[ 1.634072] Write protecting the kernel read-only data: 12288k
614[ 1.636726] Freeing unused kernel memory: 592K (ffff88000176c000 - ffff880001800000)
615[ 1.639932] Freeing unused kernel memory: 824K (ffff880001b32000 - ffff880001c00000)
616[ 1.642924] random: systemd urandom read with 25 bits of entropy available
617[ 1.908309] pps_core: LinuxPPS API ver. 1 registered
618[ 1.908312] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
619[ 1.909998] PTP clock support registered
620[ 1.921527] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
621[ 1.921531] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
622[ 1.921599] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
623[ 1.921616] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
624[ 1.922439] [drm] Initialized drm 1.1.0 20060810
625[ 1.947442] alg: No test for crc32 (crc32-pclmul)
626[ 2.173241] e1000e 0000:00:19.0 eth0: registered PHC clock
627[ 2.173245] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:3a:f3:89
628[ 2.173247] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
629[ 2.173298] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
630[ 2.174147] [drm] Memory usable by graphics device = 2048M
631[ 2.174153] checking generic (d0000000 580000) vs hw (d0000000 10000000)
632[ 2.174154] fb: switching to inteldrmfb from VESA VGA
633[ 2.174178] Console: switching to colour dummy device 80x25
634[ 2.174305] [drm] Replacing VGA console driver
635[ 2.178772] e1000e 0000:00:19.0 enp0s25: renamed from eth0
636[ 2.227163] i915 0000:00:02.0: irq 29 for MSI/MSI-X
637[ 2.227178] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
638[ 2.227179] [drm] Driver supports precise vblank timestamp query.
639[ 2.227295] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
640[ 2.255734] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
641[ 2.255900] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
642[ 2.256037] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
643[ 2.316092] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
644[ 2.326163] fbcon: inteldrmfb (fb0) is primary device
645[ 2.346318] Switched to clocksource tsc
646[ 2.599506] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
647[ 2.599507] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
648[ 3.078913] Console: switching to colour frame buffer device 200x56
649[ 3.083767] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
650[ 3.083770] i915 0000:00:02.0: registered panic notifier
651[ 5.209632] random: nonblocking pool is initialized
652[ 5.371351] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
653[ 5.571010] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6
654[ 35.662455] PM: Starting manual resume from disk
655[ 35.662461] PM: Hibernation image partition 253:1 present
656[ 35.662464] PM: Looking for hibernation image.
657[ 35.662692] PM: Image not found (code -22)
658[ 35.662696] PM: Hibernation image not present or could not be loaded.
659[ 35.675689] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
660[ 35.958095] systemd-journald[145]: Received SIGTERM from PID 1 (systemd).
661[ 36.024023] audit: type=1404 audit(1423174526.127:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
662[ 36.048818] SELinux: 2048 avtab hash slots, 104331 rules.
663[ 36.062022] SELinux: 2048 avtab hash slots, 104331 rules.
664[ 36.081210] SELinux: 8 users, 102 roles, 4981 types, 294 bools, 1 sens, 1024 cats
665[ 36.081213] SELinux: 83 classes, 104331 rules
666[ 36.084587] SELinux: Permission audit_read in class capability2 not defined in policy.
667[ 36.084591] SELinux: the above unknown classes and permissions will be allowed
668[ 36.084594] SELinux: Completing initialization.
669[ 36.084595] SELinux: Setting up existing superblocks.
670[ 36.084600] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
671[ 36.084607] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
672[ 36.084612] SELinux: initialized (dev proc, type proc), uses genfs_contexts
673[ 36.084658] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
674[ 36.084680] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
675[ 36.085088] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
676[ 36.085650] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
677[ 36.085652] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
678[ 36.085655] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
679[ 36.085657] SELinux: initialized (dev aio, type aio), not configured for labeling
680[ 36.085659] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
681[ 36.085669] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
682[ 36.085673] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
683[ 36.085678] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
684[ 36.085686] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
685[ 36.085889] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
686[ 36.085891] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
687[ 36.085895] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
688[ 36.085945] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
689[ 36.085964] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
690[ 36.085967] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
691[ 36.085969] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
692[ 36.085970] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
693[ 36.085972] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
694[ 36.085976] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
695[ 36.085979] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
696[ 36.085980] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
697[ 36.085982] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
698[ 36.085986] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
699[ 36.085988] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
700[ 36.085990] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
701[ 36.085992] SELinux: initialized (dev drm, type drm), not configured for labeling
702[ 36.085998] SELinux: initialized (dev dm-2, type ext4), uses xattr
703[ 36.090433] audit: type=1403 audit(1423174526.193:3): policy loaded auid=4294967295 ses=4294967295
704[ 36.094629] systemd[1]: Successfully loaded SELinux policy in 72.701ms.
705[ 36.122583] systemd[1]: Relabelled /dev and /run in 15.531ms.
706[ 36.146677] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service
707[ 36.146689] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service
708[ 36.146694] systemd-sysv-generator[1002]: Could not find init script for ebtables.service
709[ 36.146698] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service
710[ 36.146703] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service
711[ 36.146900] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service
712[ 36.146909] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service
713[ 36.146915] systemd-sysv-generator[1002]: Could not find init script for ebtables.service
714[ 36.146919] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service
715[ 36.146923] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service
716[ 36.147181] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service
717[ 36.147189] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service
718[ 36.147195] systemd-sysv-generator[1002]: Could not find init script for ebtables.service
719[ 36.147199] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service
720[ 36.147203] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service
721[ 36.147595] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service
722[ 36.147600] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service
723[ 36.147603] systemd-sysv-generator[1002]: Could not find init script for ebtables.service
724[ 36.147605] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service
725[ 36.147608] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service
726[ 36.147941] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service
727[ 36.147949] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service
728[ 36.147954] systemd-sysv-generator[1002]: Could not find init script for ebtables.service
729[ 36.147956] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service
730[ 36.147958] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service
731[ 36.148476] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service
732[ 36.148483] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service
733[ 36.148485] systemd-sysv-generator[1002]: Could not find init script for ebtables.service
734[ 36.148488] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service
735[ 36.148491] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service
736[ 36.148672] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service
737[ 36.148682] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service
738[ 36.148686] systemd-sysv-generator[1002]: Could not find init script for ebtables.service
739[ 36.148689] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service
740[ 36.148694] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service
741[ 36.281898] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
742[ 36.292766] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
743[ 36.297248] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
744[ 36.321173] RPC: Registered named UNIX socket transport module.
745[ 36.321176] RPC: Registered udp transport module.
746[ 36.321178] RPC: Registered tcp transport module.
747[ 36.321179] RPC: Registered tcp NFSv4.1 backchannel transport module.
748[ 36.321460] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
749[ 36.336152] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
750[ 36.347673] EXT4-fs (dm-2): re-mounted. Opts: discard
751[ 36.360699] systemd-journald[1017]: Received request to flush runtime journal from PID 1
752[ 36.423021] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
753[ 36.423365] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
754[ 36.666394] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
755[ 36.667219] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
756[ 36.668375] thinkpad_acpi: ThinkPad ACPI Extras v0.25
757[ 36.668377] thinkpad_acpi: http://ibm-acpi.sf.net/
758[ 36.668378] thinkpad_acpi: ThinkPad BIOS CBET4000 4.0-8022-gc355306, EC G7HT39WW-3.22
759[ 36.668379] thinkpad_acpi: Lenovo ThinkPad T430s, model 2356GCG
760[ 36.668550] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
761[ 36.668568] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
762[ 36.668569] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
763[ 36.671523] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20140926/utaddress-258)
764[ 36.671539] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
765[ 36.671613] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
766[ 36.671660] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140926/utaddress-258)
767[ 36.671664] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
768[ 36.671666] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140926/utaddress-258)
769[ 36.671669] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
770[ 36.671670] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140926/utaddress-258)
771[ 36.671673] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
772[ 36.671674] lpc_ich: Resource conflict(s) found affecting gpio_ich
773[ 36.671781] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
774[ 36.672565] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8
775[ 36.745153] cfg80211: Calling CRDA to update world regulatory domain
776[ 36.798889] sdhci: Secure Digital Host Controller Interface driver
777[ 36.798891] sdhci: Copyright(c) Pierre Ossman
778[ 36.801385] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 4)
779[ 36.802051] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
780[ 36.802065] sdhci-pci 0000:02:00.0: No vmmc regulator found
781[ 36.802067] sdhci-pci 0000:02:00.0: No vqmmc regulator found
782[ 36.805221] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
783[ 36.834617] Intel(R) Wireless WiFi driver for Linux, in-tree:d
784[ 36.834620] Copyright(c) 2003- 2014 Intel Corporation
785[ 36.835025] iwlwifi 0000:01:00.0: irq 30 for MSI/MSI-X
786[ 36.862392] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
787[ 36.875928] iTCO_vendor_support: vendor-support=0
788[ 36.877648] snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X
789[ 36.877806] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
790[ 36.877835] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
791[ 36.878092] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
792[ 36.938594] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
793[ 36.938598] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
794[ 36.938601] sound hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
795[ 36.938602] sound hdaudioC0D0: mono: mono_out=0x0
796[ 36.938604] sound hdaudioC0D0: inputs:
797[ 36.938606] sound hdaudioC0D0: Mic=0x18
798[ 36.938608] sound hdaudioC0D0: Dock Mic=0x19
799[ 36.938610] sound hdaudioC0D0: Internal Mic=0x12
800[ 36.970479] cfg80211: World regulatory domain updated:
801[ 36.970482] cfg80211: DFS Master region: unset
802[ 36.970483] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
803[ 36.970486] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
804[ 36.970488] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
805[ 36.970490] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
806[ 36.970492] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
807[ 36.970494] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
808[ 36.970496] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
809[ 36.970498] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
810[ 36.970500] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
811[ 36.986668] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
812[ 36.986763] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
813[ 36.986830] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
814[ 36.986897] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
815[ 36.986962] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
816[ 36.987032] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
817[ 36.987102] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
818[ 36.992945] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled
819[ 36.992948] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
820[ 36.992950] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
821[ 36.992952] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
822[ 36.993004] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
823[ 37.032006] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
824[ 37.035705] Adding 7880700k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:7880700k SSFS
825[ 37.052422] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0
826[ 37.162524] cfg80211: Calling CRDA for country: DE
827[ 37.174435] cfg80211: Regulatory domain changed to country: DE
828[ 37.174438] cfg80211: DFS Master region: ETSI
829[ 37.174439] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
830[ 37.174441] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
831[ 37.174442] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
832[ 37.174444] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
833[ 37.174445] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
834[ 37.174446] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
835[ 37.220766] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
836[ 37.221041] SELinux: initialized (dev sda5, type ext4), uses xattr
837[ 37.231698] EXT4-fs (dm-3): mounting with "discard" option, but the device does not support discard
838[ 37.231701] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: discard
839[ 37.231706] SELinux: initialized (dev dm-3, type ext4), uses xattr
840[ 37.261506] intel_rapl: Found RAPL domain package
841[ 37.261510] intel_rapl: Found RAPL domain core
842[ 37.261511] intel_rapl: Found RAPL domain uncore
843[ 37.318451] audit: type=1305 audit(1423174527.421:4): audit_pid=1262 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
844[ 37.803724] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
845[ 37.824563] ip6_tables: (C) 2000-2006 Netfilter Core Team
846[ 37.868739] Ebtables v2.0 registered
847[ 37.887002] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
848[ 38.344563] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
849[ 38.444675] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
850[ 38.446040] media: Linux media interface: v0.10
851[ 38.455726] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
852[ 38.458732] Linux video capture interface: v2.00
853[ 38.462904] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
854[ 38.515888] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2da)
855[ 38.517600] Bluetooth: Core ver 2.19
856[ 38.517615] NET: Registered protocol family 31
857[ 38.517616] Bluetooth: HCI device and connection manager initialized
858[ 38.517624] Bluetooth: HCI socket layer initialized
859[ 38.517627] Bluetooth: L2CAP socket layer initialized
860[ 38.517634] Bluetooth: SCO socket layer initialized
861[ 38.518494] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input16
862[ 38.519221] usbcore: registered new interface driver uvcvideo
863[ 38.519223] USB Video Class driver (1.1.1)
864[ 38.522491] usbcore: registered new interface driver btusb
865[ 38.528121] Bluetooth: hci0: BCM: patching hci_ver=06 hci_rev=1000 lmp_ver=06 lmp_subver=220e
866[ 38.734376] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled
867[ 38.741209] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0
868[ 39.254316] Bluetooth: hci0: BCM: firmware hci_ver=06 hci_rev=15ad lmp_ver=06 lmp_subver=220e
869[ 39.520100] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
870[ 39.520103] Bluetooth: BNEP filters: protocol multicast
871[ 39.520111] Bluetooth: BNEP socket layer initialized
872[ 39.553107] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
873[ 44.105050] wlp1s0: authenticate with dc:9f:db:fe:b2:40
874[ 44.105060] wlp1s0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
875[ 44.107573] wlp1s0: send auth to dc:9f:db:fe:b2:40 (try 1/3)
876[ 44.180675] wlp1s0: authenticated
877[ 44.181138] wlp1s0: associate with dc:9f:db:fe:b2:40 (try 1/3)
878[ 44.184612] wlp1s0: RX AssocResp from dc:9f:db:fe:b2:40 (capab=0x1431 status=0 aid=4)
879[ 44.204657] wlp1s0: associated
880[ 45.614577] loop: module loaded
881[ 45.930512] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
882[ 45.946753] tun: Universal TUN/TAP device driver, 1.6
883[ 45.946755] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
884[ 46.013186] device virbr0-nic entered promiscuous mode
885[ 46.030508] virbr0: port 1(virbr0-nic) entered forwarding state
886[ 46.030517] virbr0: port 1(virbr0-nic) entered forwarding state
887[ 46.554405] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
888[ 46.714238] fuse init (API version 7.23)
889[ 46.716351] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
890[ 46.730130] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
891[ 47.226632] virbr0: port 1(virbr0-nic) entered disabled state
892[ 47.282210] Bluetooth: RFCOMM TTY layer initialized
893[ 47.282222] Bluetooth: RFCOMM socket layer initialized
894[ 47.282291] Bluetooth: RFCOMM ver 1.11
895[ 47.592006] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
896[ 301.670598] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
897[ 366.414604] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.