Philipp Deppenwiese | a9b58bb | 2015-02-05 23:22:57 +0100 | [diff] [blame^] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Initializing cgroup subsys cpuacct |
| 4 | [ 0.000000] Linux version 3.18.3-201.fc21.x86_64 (mockbuild@bkernel01.phx2.fedoraproject.org) (gcc version 4.9.2 20141101 (Red Hat 4.9.2-1) (GCC) ) #1 SMP Mon Jan 19 15:59:31 UTC 2015 |
| 5 | [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.18.3-201.fc21.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.lvm.lv=fedora/root rd.luks.uuid=luks-c98cfbf3-ddd9-4787-bb0e-c5aebcaffa68 rhgb quiet LANG=en_US.UTF-8 |
| 6 | [ 0.000000] e820: BIOS-provided physical RAM map: |
| 7 | [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| 8 | [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| 9 | [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| 10 | [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable |
| 11 | [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved |
| 12 | [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable |
| 13 | [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved |
| 14 | [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfe37fff] usable |
| 15 | [ 0.000000] BIOS-e820: [mem 0x00000000bfe38000-0x00000000c29fffff] reserved |
| 16 | [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved |
| 17 | [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023c5fffff] usable |
| 18 | [ 0.000000] NX (Execute Disable) protection: active |
| 19 | [ 0.000000] SMBIOS 2.7 present. |
| 20 | [ 0.000000] DMI: LENOVO 2356GCG/2356GCG, BIOS CBET4000 4.0-8022-gc355306 02/05/2015 |
| 21 | [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| 22 | [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| 23 | [ 0.000000] e820: last_pfn = 0x23c600 max_arch_pfn = 0x400000000 |
| 24 | [ 0.000000] MTRR default type: write-back |
| 25 | [ 0.000000] MTRR fixed ranges enabled: |
| 26 | [ 0.000000] 00000-9FFFF write-back |
| 27 | [ 0.000000] A0000-BFFFF uncachable |
| 28 | [ 0.000000] C0000-FFFFF write-back |
| 29 | [ 0.000000] MTRR variable ranges enabled: |
| 30 | [ 0.000000] 0 base 0C0000000 mask FF0000000 uncachable |
| 31 | [ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining |
| 32 | [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable |
| 33 | [ 0.000000] 3 disabled |
| 34 | [ 0.000000] 4 disabled |
| 35 | [ 0.000000] 5 disabled |
| 36 | [ 0.000000] 6 disabled |
| 37 | [ 0.000000] 7 disabled |
| 38 | [ 0.000000] 8 disabled |
| 39 | [ 0.000000] 9 disabled |
| 40 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 41 | [ 0.000000] e820: last_pfn = 0xbfe38 max_arch_pfn = 0x400000000 |
| 42 | [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| 43 | [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| 44 | [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| 45 | [ 0.000000] BRK [0x02039000, 0x02039fff] PGTABLE |
| 46 | [ 0.000000] BRK [0x0203a000, 0x0203afff] PGTABLE |
| 47 | [ 0.000000] BRK [0x0203b000, 0x0203bfff] PGTABLE |
| 48 | [ 0.000000] init_memory_mapping: [mem 0x23c400000-0x23c5fffff] |
| 49 | [ 0.000000] [mem 0x23c400000-0x23c5fffff] page 2M |
| 50 | [ 0.000000] BRK [0x0203c000, 0x0203cfff] PGTABLE |
| 51 | [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23c3fffff] |
| 52 | [ 0.000000] [mem 0x23c000000-0x23c3fffff] page 2M |
| 53 | [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff] |
| 54 | [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M |
| 55 | [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] |
| 56 | [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| 57 | [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M |
| 58 | [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] |
| 59 | [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M |
| 60 | [ 0.000000] init_memory_mapping: [mem 0x40200000-0xbfe37fff] |
| 61 | [ 0.000000] [mem 0x40200000-0xbfdfffff] page 2M |
| 62 | [ 0.000000] [mem 0xbfe00000-0xbfe37fff] page 4k |
| 63 | [ 0.000000] BRK [0x0203d000, 0x0203dfff] PGTABLE |
| 64 | [ 0.000000] BRK [0x0203e000, 0x0203efff] PGTABLE |
| 65 | [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] |
| 66 | [ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M |
| 67 | [ 0.000000] RAMDISK: [mem 0x35ae2000-0x36d68fff] |
| 68 | [ 0.000000] ACPI: Early table checksum verification disabled |
| 69 | [ 0.000000] ACPI: RSDP 0x00000000000F1F90 000024 (v02 CORE ) |
| 70 | [ 0.000000] ACPI: XSDT 0x00000000BFE560E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 71 | [ 0.000000] ACPI: FACP 0x00000000BFE59920 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| 72 | [ 0.000000] ACPI: DSDT 0x00000000BFE56250 0036D0 (v02 COREv4 COREBOOT 20110725 INTL 20140114) |
| 73 | [ 0.000000] ACPI: FACS 0x00000000BFE56210 000040 |
| 74 | [ 0.000000] ACPI: SSDT 0x00000000BFE59A20 0012D2 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 75 | [ 0.000000] ACPI: MCFG 0x00000000BFE5AD00 00003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 76 | [ 0.000000] ACPI: APIC 0x00000000BFE5AD40 00006C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 77 | [ 0.000000] ACPI: HPET 0x00000000BFE5ADB0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 78 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 79 | [ 0.000000] No NUMA configuration found |
| 80 | [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023c5fffff] |
| 81 | [ 0.000000] NODE_DATA(0) allocated [mem 0x23c5e7000-0x23c5fafff] |
| 82 | [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880233c00000-ffff88023bbfffff] on node 0 |
| 83 | [ 0.000000] Zone ranges: |
| 84 | [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| 85 | [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| 86 | [ 0.000000] Normal [mem 0x100000000-0x23c5fffff] |
| 87 | [ 0.000000] Movable zone start for each node |
| 88 | [ 0.000000] Early memory node ranges |
| 89 | [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| 90 | [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] |
| 91 | [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] |
| 92 | [ 0.000000] node 0: [mem 0x40200000-0xbfe37fff] |
| 93 | [ 0.000000] node 0: [mem 0x100000000-0x23c5fffff] |
| 94 | [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x23c5fffff] |
| 95 | [ 0.000000] On node 0 totalpages: 2080726 |
| 96 | [ 0.000000] DMA zone: 64 pages used for memmap |
| 97 | [ 0.000000] DMA zone: 21 pages reserved |
| 98 | [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| 99 | [ 0.000000] DMA32 zone: 12201 pages used for memmap |
| 100 | [ 0.000000] DMA32 zone: 780856 pages, LIFO batch:31 |
| 101 | [ 0.000000] Normal zone: 20248 pages used for memmap |
| 102 | [ 0.000000] Normal zone: 1295872 pages, LIFO batch:31 |
| 103 | [ 0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc29fffff |
| 104 | [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| 105 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 106 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 107 | [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| 108 | [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) |
| 109 | [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) |
| 110 | [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) |
| 111 | [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 |
| 112 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 113 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 114 | [ 0.000000] ACPI: IRQ0 used by override. |
| 115 | [ 0.000000] ACPI: IRQ9 used by override. |
| 116 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 117 | [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| 118 | [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs |
| 119 | [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] |
| 120 | [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| 121 | [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| 122 | [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| 123 | [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] |
| 124 | [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] |
| 125 | [ 0.000000] PM: Registered nosave memory: [mem 0xbfe38000-0xc29fffff] |
| 126 | [ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff] |
| 127 | [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff] |
| 128 | [ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff] |
| 129 | [ 0.000000] e820: [mem 0xc2a00000-0xefffffff] available for PCI devices |
| 130 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 131 | [ 0.000000] setup_percpu: NR_CPUS:1024 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 |
| 132 | [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88023c200000 s84480 r8192 d30208 u524288 |
| 133 | [ 0.000000] pcpu-alloc: s84480 r8192 d30208 u524288 alloc=1*2097152 |
| 134 | [ 0.000000] pcpu-alloc: [0] 0 1 2 3 |
| 135 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2048192 |
| 136 | [ 0.000000] Policy zone: Normal |
| 137 | [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.18.3-201.fc21.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.lvm.lv=fedora/root rd.luks.uuid=luks-c98cfbf3-ddd9-4787-bb0e-c5aebcaffa68 rhgb quiet LANG=en_US.UTF-8 |
| 138 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 139 | [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form |
| 140 | [ 0.000000] Memory: 8089252K/8322904K available (7590K kernel code, 1235K rwdata, 3272K rodata, 1496K init, 1552K bss, 233652K reserved) |
| 141 | [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 |
| 142 | [ 0.000000] Hierarchical RCU implementation. |
| 143 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 144 | [ 0.000000] RCU restricting CPUs from NR_CPUS=1024 to nr_cpu_ids=4. |
| 145 | [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 |
| 146 | [ 0.000000] NR_IRQS:65792 nr_irqs:456 0 |
| 147 | [ 0.000000] Offload RCU callbacks from all CPUs |
| 148 | [ 0.000000] Offload RCU callbacks from CPUs: 0-3. |
| 149 | [ 0.000000] Console: colour dummy device 80x25 |
| 150 | [ 0.000000] console [tty0] enabled |
| 151 | [ 0.000000] allocated 33554432 bytes of page_cgroup |
| 152 | [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups |
| 153 | [ 0.000000] hpet clockevent registered |
| 154 | [ 0.000000] tsc: Fast TSC calibration using PIT |
| 155 | [ 0.000000] tsc: Detected 2893.462 MHz processor |
| 156 | [ 0.000038] Calibrating delay loop (skipped), value calculated using timer frequency.. 5786.92 BogoMIPS (lpj=2893462) |
| 157 | [ 0.000040] pid_max: default: 32768 minimum: 301 |
| 158 | [ 0.000046] ACPI: Core revision 20140926 |
| 159 | [ 0.002258] ACPI: All ACPI Tables successfully acquired |
| 160 | [ 0.002375] Security Framework initialized |
| 161 | [ 0.002381] SELinux: Initializing. |
| 162 | [ 0.002386] SELinux: Starting in permissive mode |
| 163 | [ 0.002886] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| 164 | [ 0.004639] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| 165 | [ 0.005405] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| 166 | [ 0.005416] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| 167 | [ 0.005582] Initializing cgroup subsys memory |
| 168 | [ 0.005586] Initializing cgroup subsys devices |
| 169 | [ 0.005588] Initializing cgroup subsys freezer |
| 170 | [ 0.005589] Initializing cgroup subsys net_cls |
| 171 | [ 0.005591] Initializing cgroup subsys blkio |
| 172 | [ 0.005593] Initializing cgroup subsys perf_event |
| 173 | [ 0.005594] Initializing cgroup subsys net_prio |
| 174 | [ 0.005596] Initializing cgroup subsys hugetlb |
| 175 | [ 0.005616] CPU: Physical Processor ID: 0 |
| 176 | [ 0.005616] CPU: Processor Core ID: 0 |
| 177 | [ 0.005926] mce: CPU supports 7 MCE banks |
| 178 | [ 0.005935] CPU0: Thermal monitoring enabled (TM1) |
| 179 | [ 0.005944] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 |
| 180 | Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 |
| 181 | [ 0.006054] Freeing SMP alternatives memory: 28K (ffffffff81eac000 - ffffffff81eb3000) |
| 182 | [ 0.006987] ftrace: allocating 27458 entries in 108 pages |
| 183 | [ 0.018536] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| 184 | [ 0.028542] smpboot: CPU0: Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz (fam: 06, model: 3a, stepping: 09) |
| 185 | [ 0.028548] TSC deadline timer enabled |
| 186 | [ 0.028566] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. |
| 187 | [ 0.028583] ... version: 3 |
| 188 | [ 0.028583] ... bit width: 48 |
| 189 | [ 0.028584] ... generic registers: 4 |
| 190 | [ 0.028585] ... value mask: 0000ffffffffffff |
| 191 | [ 0.028586] ... max period: 0000ffffffffffff |
| 192 | [ 0.028586] ... fixed-purpose events: 3 |
| 193 | [ 0.028587] ... event mask: 000000070000000f |
| 194 | [ 0.029763] x86: Booting SMP configuration: |
| 195 | [ 0.029764] .... node #0, CPUs: #1 |
| 196 | [ 0.043243] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| 197 | [ 0.043338] #2 #3 |
| 198 | [ 0.070499] x86: Booted up 1 node, 4 CPUs |
| 199 | [ 0.070502] smpboot: Total of 4 processors activated (23147.69 BogoMIPS) |
| 200 | [ 0.073846] devtmpfs: initialized |
| 201 | [ 0.077130] atomic64_test: passed for x86-64 platform with CX8 and with SSE |
| 202 | [ 0.077133] pinctrl core: initialized pinctrl subsystem |
| 203 | [ 0.077170] RTC time: 22:14:49, date: 02/05/15 |
| 204 | [ 0.077253] NET: Registered protocol family 16 |
| 205 | [ 0.079691] cpuidle: using governor menu |
| 206 | [ 0.079790] ACPI: bus type PCI registered |
| 207 | [ 0.079791] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 208 | [ 0.079857] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) |
| 209 | [ 0.079859] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820 |
| 210 | [ 0.079930] PCI: Using configuration type 1 for base access |
| 211 | [ 0.084012] ACPI: Added _OSI(Module Device) |
| 212 | [ 0.084014] ACPI: Added _OSI(Processor Device) |
| 213 | [ 0.084015] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 214 | [ 0.084016] ACPI: Added _OSI(Processor Aggregator Device) |
| 215 | [ 0.086161] ACPI: Interpreter enabled |
| 216 | [ 0.086165] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580) |
| 217 | [ 0.086169] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580) |
| 218 | [ 0.086179] ACPI: (supports S0 S3 S4 S5) |
| 219 | [ 0.086180] ACPI: Using IOAPIC for interrupt routing |
| 220 | [ 0.086195] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 221 | [ 0.091275] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 222 | [ 0.091280] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| 223 | [ 0.091314] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| 224 | [ 0.091381] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge |
| 225 | [ 0.091484] PCI host bridge to bus 0000:00 |
| 226 | [ 0.091486] pci_bus 0000:00: root bus resource [bus 00-ff] |
| 227 | [ 0.091488] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| 228 | [ 0.091489] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| 229 | [ 0.091491] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| 230 | [ 0.091492] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] |
| 231 | [ 0.091493] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] |
| 232 | [ 0.091494] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] |
| 233 | [ 0.091496] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff] |
| 234 | [ 0.091497] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] |
| 235 | [ 0.091498] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] |
| 236 | [ 0.091499] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] |
| 237 | [ 0.091501] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] |
| 238 | [ 0.091502] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] |
| 239 | [ 0.091503] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] |
| 240 | [ 0.091504] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] |
| 241 | [ 0.091505] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] |
| 242 | [ 0.091507] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff] |
| 243 | [ 0.091508] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xfebfffff] |
| 244 | [ 0.091509] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] |
| 245 | [ 0.091516] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 |
| 246 | [ 0.091585] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 |
| 247 | [ 0.091594] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit] |
| 248 | [ 0.091599] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| 249 | [ 0.091602] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f] |
| 250 | [ 0.091680] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 |
| 251 | [ 0.091705] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit] |
| 252 | [ 0.091775] pci 0000:00:14.0: PME# supported from D3hot D3cold |
| 253 | [ 0.091803] pci 0000:00:14.0: System wakeup disabled by ACPI |
| 254 | [ 0.091841] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 |
| 255 | [ 0.091857] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff] |
| 256 | [ 0.091866] pci 0000:00:19.0: reg 0x14: [mem 0xe0634000-0xe0634fff] |
| 257 | [ 0.091874] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f] |
| 258 | [ 0.091935] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold |
| 259 | [ 0.091992] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 |
| 260 | [ 0.092012] pci 0000:00:1a.0: reg 0x10: [mem 0xe0635800-0xe0635bff] |
| 261 | [ 0.092099] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| 262 | [ 0.092127] pci 0000:00:1a.0: System wakeup disabled by ACPI |
| 263 | [ 0.092160] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 |
| 264 | [ 0.092176] pci 0000:00:1b.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit] |
| 265 | [ 0.092248] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| 266 | [ 0.092275] pci 0000:00:1b.0: System wakeup disabled by ACPI |
| 267 | [ 0.092312] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400 |
| 268 | [ 0.092449] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| 269 | [ 0.092520] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400 |
| 270 | [ 0.092656] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| 271 | [ 0.092737] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 |
| 272 | [ 0.092757] pci 0000:00:1d.0: reg 0x10: [mem 0xe0635c00-0xe0635fff] |
| 273 | [ 0.092844] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| 274 | [ 0.092873] pci 0000:00:1d.0: System wakeup disabled by ACPI |
| 275 | [ 0.092906] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 |
| 276 | [ 0.093057] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 |
| 277 | [ 0.093076] pci 0000:00:1f.2: reg 0x10: [io 0x1880-0x1887] |
| 278 | [ 0.093084] pci 0000:00:1f.2: reg 0x14: [io 0x1890-0x1893] |
| 279 | [ 0.093092] pci 0000:00:1f.2: reg 0x18: [io 0x1888-0x188f] |
| 280 | [ 0.093100] pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897] |
| 281 | [ 0.093107] pci 0000:00:1f.2: reg 0x20: [io 0x1860-0x187f] |
| 282 | [ 0.093116] pci 0000:00:1f.2: reg 0x24: [mem 0xe0635000-0xe06357ff] |
| 283 | [ 0.093164] pci 0000:00:1f.2: PME# supported from D3hot |
| 284 | [ 0.093214] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 |
| 285 | [ 0.093230] pci 0000:00:1f.3: reg 0x10: [mem 0xe0636000-0xe06360ff 64bit] |
| 286 | [ 0.093249] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f] |
| 287 | [ 0.093530] pci 0000:01:00.0: [8086:0085] type 00 class 0x028000 |
| 288 | [ 0.093716] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe0401fff 64bit] |
| 289 | [ 0.094485] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold |
| 290 | [ 0.096858] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 291 | [ 0.096867] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff] |
| 292 | [ 0.097035] pci 0000:02:00.0: [1180:e823] type 00 class 0x080500 |
| 293 | [ 0.097067] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz. |
| 294 | [ 0.097104] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe05000ff] |
| 295 | [ 0.097406] pci 0000:02:00.0: supports D1 D2 |
| 296 | [ 0.097407] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| 297 | [ 0.099003] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 298 | [ 0.099009] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff] |
| 299 | [ 0.099309] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 300 | [ 0.099345] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 301 | [ 0.099377] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 302 | [ 0.099409] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 303 | [ 0.099440] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 304 | [ 0.099472] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 305 | [ 0.099503] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11 |
| 306 | [ 0.099535] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) |
| 307 | [ 0.099919] ACPI: Enabled 1 GPEs in block 00 to 3F |
| 308 | [ 0.099957] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 |
| 309 | [ 0.100035] vgaarb: setting as boot device: PCI:0000:00:02.0 |
| 310 | [ 0.100037] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none |
| 311 | [ 0.100039] vgaarb: loaded |
| 312 | [ 0.100040] vgaarb: bridge control possible 0000:00:02.0 |
| 313 | [ 0.100100] SCSI subsystem initialized |
| 314 | [ 0.100132] libata version 3.00 loaded. |
| 315 | [ 0.100155] ACPI: bus type USB registered |
| 316 | [ 0.100170] usbcore: registered new interface driver usbfs |
| 317 | [ 0.100176] usbcore: registered new interface driver hub |
| 318 | [ 0.100190] usbcore: registered new device driver usb |
| 319 | [ 0.100270] PCI: Using ACPI for IRQ routing |
| 320 | [ 0.101771] PCI: pci_cache_line_size set to 64 bytes |
| 321 | [ 0.102220] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| 322 | [ 0.102222] e820: reserve RAM buffer [mem 0xbfe38000-0xbfffffff] |
| 323 | [ 0.102223] e820: reserve RAM buffer [mem 0x23c600000-0x23fffffff] |
| 324 | [ 0.102311] NetLabel: Initializing |
| 325 | [ 0.102312] NetLabel: domain hash size = 128 |
| 326 | [ 0.102313] NetLabel: protocols = UNLABELED CIPSOv4 |
| 327 | [ 0.102323] NetLabel: unlabeled traffic allowed by default |
| 328 | [ 0.102379] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| 329 | [ 0.102383] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| 330 | [ 0.104409] Switched to clocksource hpet |
| 331 | [ 0.109439] pnp: PnP ACPI init |
| 332 | [ 0.109517] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| 333 | [ 0.109519] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved |
| 334 | [ 0.109521] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved |
| 335 | [ 0.109522] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved |
| 336 | [ 0.109524] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved |
| 337 | [ 0.109525] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved |
| 338 | [ 0.109527] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved |
| 339 | [ 0.109528] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved |
| 340 | [ 0.109531] system 00:00: [mem 0x20000000-0x201fffff] has been reserved |
| 341 | [ 0.109532] system 00:00: [mem 0x40000000-0x401fffff] has been reserved |
| 342 | [ 0.109535] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 343 | [ 0.109934] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved |
| 344 | [ 0.109937] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| 345 | [ 0.109966] system 00:02: [io 0x0500-0x057f] could not be reserved |
| 346 | [ 0.109968] system 00:02: [io 0x0480-0x04bf] has been reserved |
| 347 | [ 0.109969] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 348 | [ 0.109986] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 349 | [ 0.110015] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| 350 | [ 0.110037] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 351 | [ 0.110047] pnp: PnP ACPI: found 6 devices |
| 352 | [ 0.116290] pci 0000:00:1c.0: PCI bridge to [bus 01] |
| 353 | [ 0.116297] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff] |
| 354 | [ 0.116309] pci 0000:00:1c.1: PCI bridge to [bus 02] |
| 355 | [ 0.116316] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff] |
| 356 | [ 0.116328] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| 357 | [ 0.116329] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| 358 | [ 0.116331] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| 359 | [ 0.116332] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] |
| 360 | [ 0.116333] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] |
| 361 | [ 0.116334] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] |
| 362 | [ 0.116336] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff] |
| 363 | [ 0.116337] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff] |
| 364 | [ 0.116338] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff] |
| 365 | [ 0.116339] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff] |
| 366 | [ 0.116341] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff] |
| 367 | [ 0.116342] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff] |
| 368 | [ 0.116343] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff] |
| 369 | [ 0.116344] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff] |
| 370 | [ 0.116346] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff] |
| 371 | [ 0.116347] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff] |
| 372 | [ 0.116348] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xfebfffff] |
| 373 | [ 0.116350] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff] |
| 374 | [ 0.116351] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff] |
| 375 | [ 0.116353] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff] |
| 376 | [ 0.116375] NET: Registered protocol family 2 |
| 377 | [ 0.116527] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| 378 | [ 0.116655] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 379 | [ 0.116766] TCP: Hash tables configured (established 65536 bind 65536) |
| 380 | [ 0.116778] TCP: reno registered |
| 381 | [ 0.116787] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| 382 | [ 0.116812] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| 383 | [ 0.116862] NET: Registered protocol family 1 |
| 384 | [ 0.116874] pci 0000:00:02.0: Video device with shadowed ROM |
| 385 | [ 0.117296] PCI: CLS 64 bytes, default 64 |
| 386 | [ 0.117344] Unpacking initramfs... |
| 387 | [ 0.345179] Freeing initrd memory: 18972K (ffff880035ae2000 - ffff880036d69000) |
| 388 | [ 0.345211] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| 389 | [ 0.345213] software IO TLB [mem 0xbbe38000-0xbfe38000] (64MB) mapped at [ffff8800bbe38000-ffff8800bfe37fff] |
| 390 | [ 0.345398] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer |
| 391 | [ 0.345499] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b |
| 392 | [ 0.345506] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b |
| 393 | [ 0.345510] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b |
| 394 | [ 0.345516] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b |
| 395 | [ 0.345574] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| 396 | [ 0.345900] AVX version of gcm_enc/dec engaged. |
| 397 | [ 0.345902] AES CTR mode by8 optimization enabled |
| 398 | [ 0.347639] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) |
| 399 | [ 0.348001] futex hash table entries: 1024 (order: 4, 65536 bytes) |
| 400 | [ 0.348014] Initialise system trusted keyring |
| 401 | [ 0.348034] audit: initializing netlink subsys (disabled) |
| 402 | [ 0.348048] audit: type=2000 audit(1423174489.336:1): initialized |
| 403 | [ 0.348353] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 404 | [ 0.349443] zpool: loaded |
| 405 | [ 0.349446] zbud: loaded |
| 406 | [ 0.349610] VFS: Disk quotas dquot_6.5.2 |
| 407 | [ 0.349635] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 408 | [ 0.349895] msgmni has been set to 15836 |
| 409 | [ 0.349938] Key type big_key registered |
| 410 | [ 0.349941] SELinux: Registering netfilter hooks |
| 411 | [ 0.350749] alg: No test for stdrng (krng) |
| 412 | [ 0.350760] NET: Registered protocol family 38 |
| 413 | [ 0.350768] Key type asymmetric registered |
| 414 | [ 0.350771] Asymmetric key parser 'x509' registered |
| 415 | [ 0.350809] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| 416 | [ 0.350846] io scheduler noop registered |
| 417 | [ 0.350849] io scheduler deadline registered |
| 418 | [ 0.350875] io scheduler cfq registered (default) |
| 419 | [ 0.351042] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X |
| 420 | [ 0.351201] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X |
| 421 | [ 0.351317] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt |
| 422 | [ 0.351318] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt |
| 423 | [ 0.351324] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded |
| 424 | [ 0.351344] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt |
| 425 | [ 0.351345] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| 426 | [ 0.351350] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded |
| 427 | [ 0.351361] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 428 | [ 0.351372] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 429 | [ 0.351404] vesafb: mode is 1600x900x32, linelength=6400, pages=0 |
| 430 | [ 0.351404] vesafb: scrolling: redraw |
| 431 | [ 0.351406] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 |
| 432 | [ 0.351418] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004e80000, using 5632k, total 5632k |
| 433 | [ 0.351489] Console: switching to colour frame buffer device 200x56 |
| 434 | [ 0.353667] fb0: VESA VGA frame buffer device |
| 435 | [ 0.353679] intel_idle: MWAIT substates: 0x21120 |
| 436 | [ 0.353680] intel_idle: v0.4 model 0x3A |
| 437 | [ 0.353681] intel_idle: lapic_timer_reliable_states 0xffffffff |
| 438 | [ 0.354003] ACPI: AC Adapter [AC] (off-line) |
| 439 | [ 0.354064] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0E:00/input/input0 |
| 440 | [ 0.354067] ACPI: Sleep Button [SLPB] |
| 441 | [ 0.354115] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/PNP0C09:00/PNP0C0D:00/input/input1 |
| 442 | [ 0.354241] ACPI: Lid Switch [LID] |
| 443 | [ 0.354272] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
| 444 | [ 0.354274] ACPI: Power Button [PWRF] |
| 445 | [ 0.355157] thermal LNXTHERM:00: registered as thermal_zone0 |
| 446 | [ 0.355158] ACPI: Thermal Zone [THM0] (45 C) |
| 447 | [ 0.355677] thermal LNXTHERM:01: registered as thermal_zone1 |
| 448 | [ 0.355678] ACPI: Thermal Zone [THM1] (27 C) |
| 449 | [ 0.355702] GHES: HEST is not enabled! |
| 450 | [ 0.355796] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 451 | [ 0.356384] Non-volatile memory driver v1.3 |
| 452 | [ 0.356389] Linux agpgart interface v0.103 |
| 453 | [ 0.356514] ahci 0000:00:1f.2: version 3.0 |
| 454 | [ 0.356609] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X |
| 455 | [ 0.356626] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled |
| 456 | [ 0.356663] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x17 impl SATA mode |
| 457 | [ 0.356665] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| 458 | [ 0.357190] scsi host0: ahci |
| 459 | [ 0.357337] scsi host1: ahci |
| 460 | [ 0.357459] scsi host2: ahci |
| 461 | [ 0.357587] scsi host3: ahci |
| 462 | [ 0.357711] scsi host4: ahci |
| 463 | [ 0.357834] scsi host5: ahci |
| 464 | [ 0.357874] ata1: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635100 irq 26 |
| 465 | [ 0.357877] ata2: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635180 irq 26 |
| 466 | [ 0.357879] ata3: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635200 irq 26 |
| 467 | [ 0.357879] ata4: DUMMY |
| 468 | [ 0.357882] ata5: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635300 irq 26 |
| 469 | [ 0.357883] ata6: DUMMY |
| 470 | [ 0.357961] libphy: Fixed MDIO Bus: probed |
| 471 | [ 0.358141] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| 472 | [ 0.358191] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 |
| 473 | [ 0.358301] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported |
| 474 | [ 0.358322] xhci_hcd 0000:00:14.0: irq 27 for MSI/MSI-X |
| 475 | [ 0.358392] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 476 | [ 0.358394] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 477 | [ 0.358395] usb usb1: Product: xHCI Host Controller |
| 478 | [ 0.358396] usb usb1: Manufacturer: Linux 3.18.3-201.fc21.x86_64 xhci-hcd |
| 479 | [ 0.358397] usb usb1: SerialNumber: 0000:00:14.0 |
| 480 | [ 0.358506] hub 1-0:1.0: USB hub found |
| 481 | [ 0.358520] hub 1-0:1.0: 4 ports detected |
| 482 | [ 0.358623] xhci_hcd 0000:00:14.0: xHCI Host Controller |
| 483 | [ 0.358665] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 |
| 484 | [ 0.358694] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 |
| 485 | [ 0.358696] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 486 | [ 0.358697] usb usb2: Product: xHCI Host Controller |
| 487 | [ 0.358698] usb usb2: Manufacturer: Linux 3.18.3-201.fc21.x86_64 xhci-hcd |
| 488 | [ 0.358699] usb usb2: SerialNumber: 0000:00:14.0 |
| 489 | [ 0.358776] hub 2-0:1.0: USB hub found |
| 490 | [ 0.358785] hub 2-0:1.0: 4 ports detected |
| 491 | [ 0.358878] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 492 | [ 0.358885] ehci-pci: EHCI PCI platform driver |
| 493 | [ 0.358952] ehci-pci 0000:00:1a.0: EHCI Host Controller |
| 494 | [ 0.358986] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3 |
| 495 | [ 0.359004] ehci-pci 0000:00:1a.0: debug port 2 |
| 496 | [ 0.362898] ACPI: Battery Slot [BAT0] (battery present) |
| 497 | [ 0.362899] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported |
| 498 | [ 0.362910] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0635800 |
| 499 | [ 0.362994] ACPI: Battery Slot [BAT1] (battery absent) |
| 500 | [ 0.368494] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| 501 | [ 0.368525] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| 502 | [ 0.368526] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 503 | [ 0.368528] usb usb3: Product: EHCI Host Controller |
| 504 | [ 0.368529] usb usb3: Manufacturer: Linux 3.18.3-201.fc21.x86_64 ehci_hcd |
| 505 | [ 0.368530] usb usb3: SerialNumber: 0000:00:1a.0 |
| 506 | [ 0.368614] hub 3-0:1.0: USB hub found |
| 507 | [ 0.368619] hub 3-0:1.0: 3 ports detected |
| 508 | [ 0.368766] ehci-pci 0000:00:1d.0: EHCI Host Controller |
| 509 | [ 0.368805] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4 |
| 510 | [ 0.368816] ehci-pci 0000:00:1d.0: debug port 2 |
| 511 | [ 0.372728] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported |
| 512 | [ 0.372739] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0635c00 |
| 513 | [ 0.378505] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| 514 | [ 0.378538] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 |
| 515 | [ 0.378539] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 516 | [ 0.378541] usb usb4: Product: EHCI Host Controller |
| 517 | [ 0.378542] usb usb4: Manufacturer: Linux 3.18.3-201.fc21.x86_64 ehci_hcd |
| 518 | [ 0.378543] usb usb4: SerialNumber: 0000:00:1d.0 |
| 519 | [ 0.378633] hub 4-0:1.0: USB hub found |
| 520 | [ 0.378637] hub 4-0:1.0: 3 ports detected |
| 521 | [ 0.378732] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 522 | [ 0.378736] ohci-pci: OHCI PCI platform driver |
| 523 | [ 0.378744] uhci_hcd: USB Universal Host Controller Interface driver |
| 524 | [ 0.378777] usbcore: registered new interface driver usbserial |
| 525 | [ 0.378782] usbcore: registered new interface driver usbserial_generic |
| 526 | [ 0.378787] usbserial: USB Serial support registered for generic |
| 527 | [ 0.378812] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| 528 | [ 0.380404] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 529 | [ 0.380407] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 530 | [ 0.380535] mousedev: PS/2 mouse device common for all mice |
| 531 | [ 0.381031] rtc_cmos 00:03: RTC can wake from S4 |
| 532 | [ 0.381180] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 |
| 533 | [ 0.381209] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs |
| 534 | [ 0.381261] device-mapper: uevent: version 1.0.3 |
| 535 | [ 0.381353] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com |
| 536 | [ 0.381457] Intel P-state driver initializing. |
| 537 | [ 0.381757] hidraw: raw HID events driver (C) Jiri Kosina |
| 538 | [ 0.382004] usbcore: registered new interface driver usbhid |
| 539 | [ 0.382007] usbhid: USB HID core driver |
| 540 | [ 0.382119] drop_monitor: Initializing network drop monitor service |
| 541 | [ 0.382241] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 |
| 542 | [ 0.382262] ip_tables: (C) 2000-2006 Netfilter Core Team |
| 543 | [ 0.382337] TCP: cubic registered |
| 544 | [ 0.382351] Initializing XFRM netlink socket |
| 545 | [ 0.382555] NET: Registered protocol family 10 |
| 546 | [ 0.382931] mip6: Mobile IPv6 |
| 547 | [ 0.382940] NET: Registered protocol family 17 |
| 548 | [ 0.383640] Loading compiled-in X.509 certificates |
| 549 | [ 0.385424] Loaded X.509 cert 'Fedora kernel signing key: 87785d8e20a1942715f3975699e52d3f2ef57b7d' |
| 550 | [ 0.385459] registered taskstats version 1 |
| 551 | [ 0.386197] Magic number: 3:851:248 |
| 552 | [ 0.386314] rtc_cmos 00:03: setting system clock to 2015-02-05 22:14:50 UTC (1423174490) |
| 553 | [ 0.386414] PM: Hibernation image not present or could not be loaded. |
| 554 | [ 0.662673] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) |
| 555 | [ 0.663516] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 |
| 556 | [ 0.663522] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133 |
| 557 | [ 0.663525] ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA |
| 558 | [ 0.664027] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1 |
| 559 | [ 0.664037] ata1.00: configured for UDMA/133 |
| 560 | [ 0.665986] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 6B0Q PQ: 0 ANSI: 5 |
| 561 | [ 0.666638] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) |
| 562 | [ 0.666640] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 563 | [ 0.666964] sd 0:0:0:0: [sda] Write Protect is off |
| 564 | [ 0.666971] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 565 | [ 0.667148] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 566 | [ 0.668397] sda: sda1 sda2 sda3 sda4 < sda5 sda6 > |
| 567 | [ 0.669480] sd 0:0:0:0: [sda] Attached SCSI disk |
| 568 | [ 0.670602] usb 3-1: new high-speed USB device number 2 using ehci-pci |
| 569 | [ 0.680706] usb 4-1: new high-speed USB device number 2 using ehci-pci |
| 570 | [ 0.785431] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 |
| 571 | [ 0.785438] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 572 | [ 0.786035] hub 3-1:1.0: USB hub found |
| 573 | [ 0.786296] hub 3-1:1.0: 6 ports detected |
| 574 | [ 0.795428] usb 4-1: New USB device found, idVendor=8087, idProduct=0024 |
| 575 | [ 0.795434] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 576 | [ 0.795814] hub 4-1:1.0: USB hub found |
| 577 | [ 0.796025] hub 4-1:1.0: 8 ports detected |
| 578 | [ 0.971755] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 579 | [ 1.017885] ata2.00: ATA-8: WDC WD3200BEVT-75ZCT2, 11.01A11, max UDMA/133 |
| 580 | [ 1.017892] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA |
| 581 | [ 1.020708] ata2.00: configured for UDMA/133 |
| 582 | [ 1.020995] scsi 1:0:0:0: Direct-Access ATA WDC WD3200BEVT-7 1A11 PQ: 0 ANSI: 5 |
| 583 | [ 1.021445] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) |
| 584 | [ 1.021536] sd 1:0:0:0: Attached scsi generic sg1 type 0 |
| 585 | [ 1.021718] sd 1:0:0:0: [sdb] Write Protect is off |
| 586 | [ 1.021724] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 |
| 587 | [ 1.021780] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 588 | [ 1.024557] sdb: sdb1 |
| 589 | [ 1.025280] sd 1:0:0:0: [sdb] Attached SCSI disk |
| 590 | [ 1.061971] usb 3-1.3: new full-speed USB device number 3 using ehci-pci |
| 591 | [ 1.148392] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020 |
| 592 | [ 1.148399] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 593 | [ 1.148402] usb 3-1.3: Product: Biometric Coprocessor |
| 594 | [ 1.148405] usb 3-1.3: Manufacturer: Auth |
| 595 | [ 1.180455] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 920262 |
| 596 | [ 1.180466] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0 |
| 597 | [ 1.220266] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5 |
| 598 | [ 1.222030] usb 3-1.4: new full-speed USB device number 4 using ehci-pci |
| 599 | [ 1.311276] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6 |
| 600 | [ 1.311283] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 601 | [ 1.311286] usb 3-1.4: Product: BCM20702A0 |
| 602 | [ 1.311289] usb 3-1.4: Manufacturer: Broadcom Corp |
| 603 | [ 1.311292] usb 3-1.4: SerialNumber: 083E8EE34B9A |
| 604 | [ 1.326788] ata3: SATA link down (SStatus 0 SControl 300) |
| 605 | [ 1.345852] tsc: Refined TSC clocksource calibration: 2893.427 MHz |
| 606 | [ 1.385005] usb 3-1.6: new high-speed USB device number 5 using ehci-pci |
| 607 | [ 1.478247] usb 3-1.6: New USB device found, idVendor=04f2, idProduct=b2da |
| 608 | [ 1.478254] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 609 | [ 1.478257] usb 3-1.6: Product: Integrated Camera |
| 610 | [ 1.478260] usb 3-1.6: Manufacturer: Chicony Electronics Co., Ltd. |
| 611 | [ 1.631918] ata5: SATA link down (SStatus 0 SControl 300) |
| 612 | [ 1.634066] Freeing unused kernel memory: 1496K (ffffffff81d36000 - ffffffff81eac000) |
| 613 | [ 1.634072] Write protecting the kernel read-only data: 12288k |
| 614 | [ 1.636726] Freeing unused kernel memory: 592K (ffff88000176c000 - ffff880001800000) |
| 615 | [ 1.639932] Freeing unused kernel memory: 824K (ffff880001b32000 - ffff880001c00000) |
| 616 | [ 1.642924] random: systemd urandom read with 25 bits of entropy available |
| 617 | [ 1.908309] pps_core: LinuxPPS API ver. 1 registered |
| 618 | [ 1.908312] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> |
| 619 | [ 1.909998] PTP clock support registered |
| 620 | [ 1.921527] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k |
| 621 | [ 1.921531] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. |
| 622 | [ 1.921599] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode |
| 623 | [ 1.921616] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X |
| 624 | [ 1.922439] [drm] Initialized drm 1.1.0 20060810 |
| 625 | [ 1.947442] alg: No test for crc32 (crc32-pclmul) |
| 626 | [ 2.173241] e1000e 0000:00:19.0 eth0: registered PHC clock |
| 627 | [ 2.173245] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:3a:f3:89 |
| 628 | [ 2.173247] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection |
| 629 | [ 2.173298] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF |
| 630 | [ 2.174147] [drm] Memory usable by graphics device = 2048M |
| 631 | [ 2.174153] checking generic (d0000000 580000) vs hw (d0000000 10000000) |
| 632 | [ 2.174154] fb: switching to inteldrmfb from VESA VGA |
| 633 | [ 2.174178] Console: switching to colour dummy device 80x25 |
| 634 | [ 2.174305] [drm] Replacing VGA console driver |
| 635 | [ 2.178772] e1000e 0000:00:19.0 enp0s25: renamed from eth0 |
| 636 | [ 2.227163] i915 0000:00:02.0: irq 29 for MSI/MSI-X |
| 637 | [ 2.227178] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). |
| 638 | [ 2.227179] [drm] Driver supports precise vblank timestamp query. |
| 639 | [ 2.227295] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| 640 | [ 2.255734] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| 641 | [ 2.255900] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 |
| 642 | [ 2.256037] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0 |
| 643 | [ 2.316092] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 |
| 644 | [ 2.326163] fbcon: inteldrmfb (fb0) is primary device |
| 645 | [ 2.346318] Switched to clocksource tsc |
| 646 | [ 2.599506] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A |
| 647 | [ 2.599507] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun |
| 648 | [ 3.078913] Console: switching to colour frame buffer device 200x56 |
| 649 | [ 3.083767] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device |
| 650 | [ 3.083770] i915 0000:00:02.0: registered panic notifier |
| 651 | [ 5.209632] random: nonblocking pool is initialized |
| 652 | [ 5.371351] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3 |
| 653 | [ 5.571010] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input6 |
| 654 | [ 35.662455] PM: Starting manual resume from disk |
| 655 | [ 35.662461] PM: Hibernation image partition 253:1 present |
| 656 | [ 35.662464] PM: Looking for hibernation image. |
| 657 | [ 35.662692] PM: Image not found (code -22) |
| 658 | [ 35.662696] PM: Hibernation image not present or could not be loaded. |
| 659 | [ 35.675689] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) |
| 660 | [ 35.958095] systemd-journald[145]: Received SIGTERM from PID 1 (systemd). |
| 661 | [ 36.024023] audit: type=1404 audit(1423174526.127:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 |
| 662 | [ 36.048818] SELinux: 2048 avtab hash slots, 104331 rules. |
| 663 | [ 36.062022] SELinux: 2048 avtab hash slots, 104331 rules. |
| 664 | [ 36.081210] SELinux: 8 users, 102 roles, 4981 types, 294 bools, 1 sens, 1024 cats |
| 665 | [ 36.081213] SELinux: 83 classes, 104331 rules |
| 666 | [ 36.084587] SELinux: Permission audit_read in class capability2 not defined in policy. |
| 667 | [ 36.084591] SELinux: the above unknown classes and permissions will be allowed |
| 668 | [ 36.084594] SELinux: Completing initialization. |
| 669 | [ 36.084595] SELinux: Setting up existing superblocks. |
| 670 | [ 36.084600] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts |
| 671 | [ 36.084607] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts |
| 672 | [ 36.084612] SELinux: initialized (dev proc, type proc), uses genfs_contexts |
| 673 | [ 36.084658] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| 674 | [ 36.084680] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs |
| 675 | [ 36.085088] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts |
| 676 | [ 36.085650] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs |
| 677 | [ 36.085652] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs |
| 678 | [ 36.085655] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts |
| 679 | [ 36.085657] SELinux: initialized (dev aio, type aio), not configured for labeling |
| 680 | [ 36.085659] SELinux: initialized (dev devpts, type devpts), uses transition SIDs |
| 681 | [ 36.085669] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs |
| 682 | [ 36.085673] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs |
| 683 | [ 36.085678] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts |
| 684 | [ 36.085686] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts |
| 685 | [ 36.085889] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts |
| 686 | [ 36.085891] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| 687 | [ 36.085895] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| 688 | [ 36.085945] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| 689 | [ 36.085964] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| 690 | [ 36.085967] SELinux: initialized (dev pstore, type pstore), uses genfs_contexts |
| 691 | [ 36.085969] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| 692 | [ 36.085970] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| 693 | [ 36.085972] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| 694 | [ 36.085976] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| 695 | [ 36.085979] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| 696 | [ 36.085980] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| 697 | [ 36.085982] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| 698 | [ 36.085986] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| 699 | [ 36.085988] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts |
| 700 | [ 36.085990] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts |
| 701 | [ 36.085992] SELinux: initialized (dev drm, type drm), not configured for labeling |
| 702 | [ 36.085998] SELinux: initialized (dev dm-2, type ext4), uses xattr |
| 703 | [ 36.090433] audit: type=1403 audit(1423174526.193:3): policy loaded auid=4294967295 ses=4294967295 |
| 704 | [ 36.094629] systemd[1]: Successfully loaded SELinux policy in 72.701ms. |
| 705 | [ 36.122583] systemd[1]: Relabelled /dev and /run in 15.531ms. |
| 706 | [ 36.146677] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service |
| 707 | [ 36.146689] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service |
| 708 | [ 36.146694] systemd-sysv-generator[1002]: Could not find init script for ebtables.service |
| 709 | [ 36.146698] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service |
| 710 | [ 36.146703] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service |
| 711 | [ 36.146900] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service |
| 712 | [ 36.146909] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service |
| 713 | [ 36.146915] systemd-sysv-generator[1002]: Could not find init script for ebtables.service |
| 714 | [ 36.146919] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service |
| 715 | [ 36.146923] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service |
| 716 | [ 36.147181] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service |
| 717 | [ 36.147189] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service |
| 718 | [ 36.147195] systemd-sysv-generator[1002]: Could not find init script for ebtables.service |
| 719 | [ 36.147199] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service |
| 720 | [ 36.147203] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service |
| 721 | [ 36.147595] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service |
| 722 | [ 36.147600] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service |
| 723 | [ 36.147603] systemd-sysv-generator[1002]: Could not find init script for ebtables.service |
| 724 | [ 36.147605] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service |
| 725 | [ 36.147608] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service |
| 726 | [ 36.147941] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service |
| 727 | [ 36.147949] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service |
| 728 | [ 36.147954] systemd-sysv-generator[1002]: Could not find init script for ebtables.service |
| 729 | [ 36.147956] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service |
| 730 | [ 36.147958] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service |
| 731 | [ 36.148476] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service |
| 732 | [ 36.148483] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service |
| 733 | [ 36.148485] systemd-sysv-generator[1002]: Could not find init script for ebtables.service |
| 734 | [ 36.148488] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service |
| 735 | [ 36.148491] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service |
| 736 | [ 36.148672] systemd-sysv-generator[1002]: Could not find init script for carbon-cache.service |
| 737 | [ 36.148682] systemd-sysv-generator[1002]: Could not find init script for netcf-transaction.service |
| 738 | [ 36.148686] systemd-sysv-generator[1002]: Could not find init script for ebtables.service |
| 739 | [ 36.148689] systemd-sysv-generator[1002]: Could not find init script for carbon-aggregator.service |
| 740 | [ 36.148694] systemd-sysv-generator[1002]: Could not find init script for carbon-relay.service |
| 741 | [ 36.281898] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts |
| 742 | [ 36.292766] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs |
| 743 | [ 36.297248] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| 744 | [ 36.321173] RPC: Registered named UNIX socket transport module. |
| 745 | [ 36.321176] RPC: Registered udp transport module. |
| 746 | [ 36.321178] RPC: Registered tcp transport module. |
| 747 | [ 36.321179] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 748 | [ 36.321460] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts |
| 749 | [ 36.336152] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts |
| 750 | [ 36.347673] EXT4-fs (dm-2): re-mounted. Opts: discard |
| 751 | [ 36.360699] systemd-journald[1017]: Received request to flush runtime journal from PID 1 |
| 752 | [ 36.423021] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| 753 | [ 36.423365] SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts |
| 754 | [ 36.666394] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt |
| 755 | [ 36.667219] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| 756 | [ 36.668375] thinkpad_acpi: ThinkPad ACPI Extras v0.25 |
| 757 | [ 36.668377] thinkpad_acpi: http://ibm-acpi.sf.net/ |
| 758 | [ 36.668378] thinkpad_acpi: ThinkPad BIOS CBET4000 4.0-8022-gc355306, EC G7HT39WW-3.22 |
| 759 | [ 36.668379] thinkpad_acpi: Lenovo ThinkPad T430s, model 2356GCG |
| 760 | [ 36.668550] thinkpad_acpi: detected a 8-level brightness capable ThinkPad |
| 761 | [ 36.668568] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver |
| 762 | [ 36.668569] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... |
| 763 | [ 36.671523] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20140926/utaddress-258) |
| 764 | [ 36.671539] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 765 | [ 36.671613] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one |
| 766 | [ 36.671660] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140926/utaddress-258) |
| 767 | [ 36.671664] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 768 | [ 36.671666] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140926/utaddress-258) |
| 769 | [ 36.671669] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 770 | [ 36.671670] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140926/utaddress-258) |
| 771 | [ 36.671673] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver |
| 772 | [ 36.671674] lpc_ich: Resource conflict(s) found affecting gpio_ich |
| 773 | [ 36.671781] thinkpad_acpi: Console audio control enabled, mode: monitor (read only) |
| 774 | [ 36.672565] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input8 |
| 775 | [ 36.745153] cfg80211: Calling CRDA to update world regulatory domain |
| 776 | [ 36.798889] sdhci: Secure Digital Host Controller Interface driver |
| 777 | [ 36.798891] sdhci: Copyright(c) Pierre Ossman |
| 778 | [ 36.801385] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e823] (rev 4) |
| 779 | [ 36.802051] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it. |
| 780 | [ 36.802065] sdhci-pci 0000:02:00.0: No vmmc regulator found |
| 781 | [ 36.802067] sdhci-pci 0000:02:00.0: No vqmmc regulator found |
| 782 | [ 36.805221] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA |
| 783 | [ 36.834617] Intel(R) Wireless WiFi driver for Linux, in-tree:d |
| 784 | [ 36.834620] Copyright(c) 2003- 2014 Intel Corporation |
| 785 | [ 36.835025] iwlwifi 0000:01:00.0: irq 30 for MSI/MSI-X |
| 786 | [ 36.862392] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm |
| 787 | [ 36.875928] iTCO_vendor_support: vendor-support=0 |
| 788 | [ 36.877648] snd_hda_intel 0000:00:1b.0: irq 31 for MSI/MSI-X |
| 789 | [ 36.877806] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 |
| 790 | [ 36.877835] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560) |
| 791 | [ 36.878092] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| 792 | [ 36.938594] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker |
| 793 | [ 36.938598] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| 794 | [ 36.938601] sound hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0) |
| 795 | [ 36.938602] sound hdaudioC0D0: mono: mono_out=0x0 |
| 796 | [ 36.938604] sound hdaudioC0D0: inputs: |
| 797 | [ 36.938606] sound hdaudioC0D0: Mic=0x18 |
| 798 | [ 36.938608] sound hdaudioC0D0: Dock Mic=0x19 |
| 799 | [ 36.938610] sound hdaudioC0D0: Internal Mic=0x12 |
| 800 | [ 36.970479] cfg80211: World regulatory domain updated: |
| 801 | [ 36.970482] cfg80211: DFS Master region: unset |
| 802 | [ 36.970483] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| 803 | [ 36.970486] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| 804 | [ 36.970488] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| 805 | [ 36.970490] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) |
| 806 | [ 36.970492] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) |
| 807 | [ 36.970494] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) |
| 808 | [ 36.970496] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) |
| 809 | [ 36.970498] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) |
| 810 | [ 36.970500] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) |
| 811 | [ 36.986668] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 |
| 812 | [ 36.986763] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 |
| 813 | [ 36.986830] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 |
| 814 | [ 36.986897] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 |
| 815 | [ 36.986962] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 |
| 816 | [ 36.987032] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 |
| 817 | [ 36.987102] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 |
| 818 | [ 36.992945] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled |
| 819 | [ 36.992948] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled |
| 820 | [ 36.992950] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled |
| 821 | [ 36.992952] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 |
| 822 | [ 36.993004] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| 823 | [ 37.032006] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' |
| 824 | [ 37.035705] Adding 7880700k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:7880700k SSFS |
| 825 | [ 37.052422] iwlwifi 0000:01:00.0 wlp1s0: renamed from wlan0 |
| 826 | [ 37.162524] cfg80211: Calling CRDA for country: DE |
| 827 | [ 37.174435] cfg80211: Regulatory domain changed to country: DE |
| 828 | [ 37.174438] cfg80211: DFS Master region: ETSI |
| 829 | [ 37.174439] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) |
| 830 | [ 37.174441] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) |
| 831 | [ 37.174442] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) |
| 832 | [ 37.174444] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) |
| 833 | [ 37.174445] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) |
| 834 | [ 37.174446] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) |
| 835 | [ 37.220766] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) |
| 836 | [ 37.221041] SELinux: initialized (dev sda5, type ext4), uses xattr |
| 837 | [ 37.231698] EXT4-fs (dm-3): mounting with "discard" option, but the device does not support discard |
| 838 | [ 37.231701] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: discard |
| 839 | [ 37.231706] SELinux: initialized (dev dm-3, type ext4), uses xattr |
| 840 | [ 37.261506] intel_rapl: Found RAPL domain package |
| 841 | [ 37.261510] intel_rapl: Found RAPL domain core |
| 842 | [ 37.261511] intel_rapl: Found RAPL domain uncore |
| 843 | [ 37.318451] audit: type=1305 audit(1423174527.421:4): audit_pid=1262 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 |
| 844 | [ 37.803724] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) |
| 845 | [ 37.824563] ip6_tables: (C) 2000-2006 Netfilter Core Team |
| 846 | [ 37.868739] Ebtables v2.0 registered |
| 847 | [ 37.887002] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. |
| 848 | [ 38.344563] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X |
| 849 | [ 38.444675] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X |
| 850 | [ 38.446040] media: Linux media interface: v0.10 |
| 851 | [ 38.455726] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| 852 | [ 38.458732] Linux video capture interface: v2.00 |
| 853 | [ 38.462904] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 |
| 854 | [ 38.515888] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b2da) |
| 855 | [ 38.517600] Bluetooth: Core ver 2.19 |
| 856 | [ 38.517615] NET: Registered protocol family 31 |
| 857 | [ 38.517616] Bluetooth: HCI device and connection manager initialized |
| 858 | [ 38.517624] Bluetooth: HCI socket layer initialized |
| 859 | [ 38.517627] Bluetooth: L2CAP socket layer initialized |
| 860 | [ 38.517634] Bluetooth: SCO socket layer initialized |
| 861 | [ 38.518494] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input16 |
| 862 | [ 38.519221] usbcore: registered new interface driver uvcvideo |
| 863 | [ 38.519223] USB Video Class driver (1.1.1) |
| 864 | [ 38.522491] usbcore: registered new interface driver btusb |
| 865 | [ 38.528121] Bluetooth: hci0: BCM: patching hci_ver=06 hci_rev=1000 lmp_ver=06 lmp_subver=220e |
| 866 | [ 38.734376] iwlwifi 0000:01:00.0: L1 Disabled - LTR Disabled |
| 867 | [ 38.741209] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 |
| 868 | [ 39.254316] Bluetooth: hci0: BCM: firmware hci_ver=06 hci_rev=15ad lmp_ver=06 lmp_subver=220e |
| 869 | [ 39.520100] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| 870 | [ 39.520103] Bluetooth: BNEP filters: protocol multicast |
| 871 | [ 39.520111] Bluetooth: BNEP socket layer initialized |
| 872 | [ 39.553107] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| 873 | [ 44.105050] wlp1s0: authenticate with dc:9f:db:fe:b2:40 |
| 874 | [ 44.105060] wlp1s0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded |
| 875 | [ 44.107573] wlp1s0: send auth to dc:9f:db:fe:b2:40 (try 1/3) |
| 876 | [ 44.180675] wlp1s0: authenticated |
| 877 | [ 44.181138] wlp1s0: associate with dc:9f:db:fe:b2:40 (try 1/3) |
| 878 | [ 44.184612] wlp1s0: RX AssocResp from dc:9f:db:fe:b2:40 (capab=0x1431 status=0 aid=4) |
| 879 | [ 44.204657] wlp1s0: associated |
| 880 | [ 45.614577] loop: module loaded |
| 881 | [ 45.930512] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready |
| 882 | [ 45.946753] tun: Universal TUN/TAP device driver, 1.6 |
| 883 | [ 45.946755] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> |
| 884 | [ 46.013186] device virbr0-nic entered promiscuous mode |
| 885 | [ 46.030508] virbr0: port 1(virbr0-nic) entered forwarding state |
| 886 | [ 46.030517] virbr0: port 1(virbr0-nic) entered forwarding state |
| 887 | [ 46.554405] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| 888 | [ 46.714238] fuse init (API version 7.23) |
| 889 | [ 46.716351] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts |
| 890 | [ 46.730130] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts |
| 891 | [ 47.226632] virbr0: port 1(virbr0-nic) entered disabled state |
| 892 | [ 47.282210] Bluetooth: RFCOMM TTY layer initialized |
| 893 | [ 47.282222] Bluetooth: RFCOMM socket layer initialized |
| 894 | [ 47.282291] Bluetooth: RFCOMM ver 1.11 |
| 895 | [ 47.592006] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| 896 | [ 301.670598] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs |
| 897 | [ 366.414604] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. |