Gitiles
Code Review Sign In
review.coreboot.org / board-status / d35131d26bb11079a7f9a28fcba3f5abd8176b63 / . / lenovo / x230 / 4.0-9858-ga4cf83d / 2015-06-02T19:48:24Z / kernel_log.txt
blob: 47151658b724239bc084b15512f6b057989309ad [file] [log] [blame]
Paul Menzel26285712017-04-17 10:57:51 +0200[diff] [blame]1[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 4.0.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-16) ) #1 SMP Debian 4.0.2-1 (2015-05-11)
5[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-1-amd64 root=UUID=f1361d3c-dc7b-42dd-8906-4cff95e9111d ro quiet
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
8[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
9[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
11[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
13[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfeabfff] usable
15[ 0.000000] BIOS-e820: [mem 0x00000000bfeac000-0x00000000bfffffff] type 16
16[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043b5fffff] usable
19[ 0.000000] NX (Execute Disable) protection: active
20[ 0.000000] SMBIOS 2.7 present.
21[ 0.000000] DMI: LENOVO 2325TLU/2325TLU, BIOS CBET4000 4.0-9846-g827674b-dirty 05/31/2015
22[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
23[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
24[ 0.000000] AGP: No AGP bridge found
25[ 0.000000] e820: last_pfn = 0x43b600 max_arch_pfn = 0x400000000
26[ 0.000000] MTRR default type: write-back
27[ 0.000000] MTRR fixed ranges enabled:
28[ 0.000000] 00000-9FFFF write-back
29[ 0.000000] A0000-BFFFF uncachable
30[ 0.000000] C0000-FFFFF write-back
31[ 0.000000] MTRR variable ranges enabled:
32[ 0.000000] 0 base 0C0000000 mask FF0000000 uncachable
33[ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining
34[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
35[ 0.000000] 3 disabled
36[ 0.000000] 4 disabled
37[ 0.000000] 5 disabled
38[ 0.000000] 6 disabled
39[ 0.000000] 7 disabled
40[ 0.000000] 8 disabled
41[ 0.000000] 9 disabled
42[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
43[ 0.000000] e820: last_pfn = 0xbfeac max_arch_pfn = 0x400000000
44[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
45[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
46[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
47[ 0.000000] BRK [0x01b10000, 0x01b10fff] PGTABLE
48[ 0.000000] BRK [0x01b11000, 0x01b11fff] PGTABLE
49[ 0.000000] BRK [0x01b12000, 0x01b12fff] PGTABLE
50[ 0.000000] init_memory_mapping: [mem 0x43b400000-0x43b5fffff]
51[ 0.000000] [mem 0x43b400000-0x43b5fffff] page 2M
52[ 0.000000] BRK [0x01b13000, 0x01b13fff] PGTABLE
53[ 0.000000] init_memory_mapping: [mem 0x420000000-0x43b3fffff]
54[ 0.000000] [mem 0x420000000-0x43b3fffff] page 2M
55[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41fffffff]
56[ 0.000000] [mem 0x400000000-0x41fffffff] page 2M
57[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
58[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
59[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
60[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
61[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
62[ 0.000000] init_memory_mapping: [mem 0x40200000-0xbfeabfff]
63[ 0.000000] [mem 0x40200000-0xbfdfffff] page 2M
64[ 0.000000] [mem 0xbfe00000-0xbfeabfff] page 4k
65[ 0.000000] BRK [0x01b14000, 0x01b14fff] PGTABLE
66[ 0.000000] BRK [0x01b15000, 0x01b15fff] PGTABLE
67[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
68[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
69[ 0.000000] RAMDISK: [mem 0x3623c000-0x37115fff]
70[ 0.000000] ACPI: Early table checksum verification disabled
71[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )
72[ 0.000000] ACPI: XSDT 0x00000000BFEC80E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
73[ 0.000000] ACPI: FACP 0x00000000BFECB6E0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
74[ 0.000000] ACPI: DSDT 0x00000000BFEC8250 003484 (v02 COREv4 COREBOOT 20110725 INTL 20150410)
75[ 0.000000] ACPI: FACS 0x00000000BFEC8210 000040
76[ 0.000000] ACPI: SSDT 0x00000000BFECB7E0 0013FC (v02 CORE COREBOOT 0000002A CORE 0000002A)
77[ 0.000000] ACPI: MCFG 0x00000000BFECCBE0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
78[ 0.000000] ACPI: TCPA 0x00000000BFECCC20 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
79[ 0.000000] ACPI: APIC 0x00000000BFECCC60 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
80[ 0.000000] ACPI: HPET 0x00000000BFECCCD0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
81[ 0.000000] ACPI: Local APIC address 0xfee00000
82[ 0.000000] No NUMA configuration found
83[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043b5fffff]
84[ 0.000000] NODE_DATA(0) allocated [mem 0x43b5ef000-0x43b5f2fff]
85[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042ac00000-ffff88043abfffff] on node 0
86[ 0.000000] Zone ranges:
87[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
88[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
89[ 0.000000] Normal [mem 0x0000000100000000-0x000000043b5fffff]
90[ 0.000000] Movable zone start for each node
91[ 0.000000] Early memory node ranges
92[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
93[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
94[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
95[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000bfeabfff]
96[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043b5fffff]
97[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043b5fffff]
98[ 0.000000] On node 0 totalpages: 4173899
99[ 0.000000] DMA zone: 64 pages used for memmap
100[ 0.000000] DMA zone: 22 pages reserved
101[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
102[ 0.000000] DMA32 zone: 12203 pages used for memmap
103[ 0.000000] DMA32 zone: 780972 pages, LIFO batch:31
104[ 0.000000] Normal zone: 52952 pages used for memmap
105[ 0.000000] Normal zone: 3388928 pages, LIFO batch:31
106[ 0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc29fffff
107[ 0.000000] ACPI: PM-Timer IO Port: 0x508
108[ 0.000000] ACPI: Local APIC address 0xfee00000
109[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
110[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
111[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
112[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
113[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
114[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
115[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
116[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
117[ 0.000000] ACPI: IRQ0 used by override.
118[ 0.000000] ACPI: IRQ9 used by override.
119[ 0.000000] Using ACPI (MADT) for SMP configuration information
120[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
121[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
122[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
123[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
124[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
125[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
126[ 0.000000] PM: Registered nosave memory: [mem 0xbfeac000-0xbfffffff]
127[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
128[ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
129[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
130[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
131[ 0.000000] e820: [mem 0xc2a00000-0xefffffff] available for PCI devices
132[ 0.000000] Booting paravirtualized kernel on bare hardware
133[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
134[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88043b200000 s87256 r8192 d31528 u524288
135[ 0.000000] pcpu-alloc: s87256 r8192 d31528 u524288 alloc=1*2097152
136[ 0.000000] pcpu-alloc: [0] 0 1 2 3
137[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4108658
138[ 0.000000] Policy zone: Normal
139[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-1-amd64 root=UUID=f1361d3c-dc7b-42dd-8906-4cff95e9111d ro quiet
140[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
141[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
142[ 0.000000] AGP: Checking aperture...
143[ 0.000000] AGP: No AGP bridge found
144[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
145[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
146[ 0.000000] Memory: 16339936K/16695596K available (5541K kernel code, 1020K rwdata, 1928K rodata, 1244K init, 832K bss, 355660K reserved, 0K cma-reserved)
147[ 0.000000] Hierarchical RCU implementation.
148[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
149[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
150[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
151[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
152[ 0.000000] Console: colour dummy device 80x25
153[ 0.000000] console [tty0] enabled
154[ 0.000000] hpet clockevent registered
155[ 0.000000] tsc: Fast TSC calibration using PIT
156[ 0.000000] tsc: Detected 2793.533 MHz processor
157[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.06 BogoMIPS (lpj=11174132)
158[ 0.000031] pid_max: default: 32768 minimum: 301
159[ 0.000036] ACPI: Core revision 20150204
160[ 0.002466] ACPI: All ACPI Tables successfully acquired
161[ 0.002586] Security Framework initialized
162[ 0.002592] AppArmor: AppArmor disabled by boot time parameter
163[ 0.002593] Yama: disabled by default; enable with sysctl kernel.yama.*
164[ 0.003385] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
165[ 0.006929] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
166[ 0.008516] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
167[ 0.008532] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
168[ 0.008740] Initializing cgroup subsys blkio
169[ 0.008742] Initializing cgroup subsys memory
170[ 0.008746] Initializing cgroup subsys devices
171[ 0.008748] Initializing cgroup subsys freezer
172[ 0.008750] Initializing cgroup subsys net_cls
173[ 0.008752] Initializing cgroup subsys perf_event
174[ 0.008754] Initializing cgroup subsys net_prio
175[ 0.008777] CPU: Physical Processor ID: 0
176[ 0.008778] CPU: Processor Core ID: 0
177[ 0.009115] mce: CPU supports 7 MCE banks
178[ 0.009124] CPU0: Thermal monitoring enabled (TM1)
179[ 0.009130] process: using mwait in idle threads
180[ 0.009133] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
181[ 0.009134] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
182[ 0.009234] Freeing SMP alternatives memory: 24K (ffffffff81a38000 - ffffffff81a3e000)
183[ 0.010281] ftrace: allocating 22346 entries in 88 pages
184[ 0.018811] x2apic: IRQ remapping doesn't support X2APIC mode
185[ 0.019262] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
186[ 0.058996] TSC deadline timer enabled
187[ 0.059000] smpboot: CPU0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
188[ 0.059023] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
189[ 0.059040] ... version: 3
190[ 0.059041] ... bit width: 48
191[ 0.059042] ... generic registers: 4
192[ 0.059042] ... value mask: 0000ffffffffffff
193[ 0.059043] ... max period: 0000ffffffffffff
194[ 0.059044] ... fixed-purpose events: 3
195[ 0.059045] ... event mask: 000000070000000f
196[ 0.059514] x86: Booting SMP configuration:
197[ 0.059516] .... node #0, CPUs: #1
198[ 0.072919] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
199[ 0.073003] #2 #3
200[ 0.099805] x86: Booted up 1 node, 4 CPUs
201[ 0.099808] smpboot: Total of 4 processors activated (22348.26 BogoMIPS)
202[ 0.102627] devtmpfs: initialized
203[ 0.105865] pinctrl core: initialized pinctrl subsystem
204[ 0.105981] NET: Registered protocol family 16
205[ 0.115826] cpuidle: using governor ladder
206[ 0.126427] cpuidle: using governor menu
207[ 0.126520] ACPI: bus type PCI registered
208[ 0.126522] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
209[ 0.126593] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
210[ 0.126595] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
211[ 0.126662] PCI: Using configuration type 1 for base access
212[ 0.136209] ACPI: Added _OSI(Module Device)
213[ 0.136211] ACPI: Added _OSI(Processor Device)
214[ 0.136212] ACPI: Added _OSI(3.0 _SCP Extensions)
215[ 0.136213] ACPI: Added _OSI(Processor Aggregator Device)
216[ 0.138502] ACPI: Interpreter enabled
217[ 0.138507] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
218[ 0.138511] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
219[ 0.138521] ACPI: (supports S0 S3 S4 S5)
220[ 0.138523] ACPI: Using IOAPIC for interrupt routing
221[ 0.138542] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
222[ 0.141899] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
223[ 0.141904] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
224[ 0.141943] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
225[ 0.141990] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
226[ 0.142107] PCI host bridge to bus 0000:00
227[ 0.142109] pci_bus 0000:00: root bus resource [bus 00-ff]
228[ 0.142111] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
229[ 0.142112] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
230[ 0.142114] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
231[ 0.142115] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
232[ 0.142116] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
233[ 0.142118] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
234[ 0.142119] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
235[ 0.142120] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
236[ 0.142121] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
237[ 0.142123] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
238[ 0.142124] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
239[ 0.142125] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
240[ 0.142127] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
241[ 0.142128] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
242[ 0.142129] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
243[ 0.142130] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
244[ 0.142132] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xefffffff window]
245[ 0.142133] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
246[ 0.142139] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
247[ 0.142213] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
248[ 0.142223] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
249[ 0.142228] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
250[ 0.142233] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
251[ 0.142318] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
252[ 0.142339] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit]
253[ 0.142408] pci 0000:00:14.0: PME# supported from D3hot D3cold
254[ 0.142438] pci 0000:00:14.0: System wakeup disabled by ACPI
255[ 0.142476] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
256[ 0.142497] pci 0000:00:16.0: reg 0x10: [mem 0xe1636100-0xe163610f 64bit]
257[ 0.142577] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
258[ 0.142646] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
259[ 0.142662] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
260[ 0.142670] pci 0000:00:19.0: reg 0x14: [mem 0xe1634000-0xe1634fff]
261[ 0.142677] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
262[ 0.142739] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
263[ 0.142802] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
264[ 0.142822] pci 0000:00:1a.0: reg 0x10: [mem 0xe1635800-0xe1635bff]
265[ 0.142910] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
266[ 0.142941] pci 0000:00:1a.0: System wakeup disabled by ACPI
267[ 0.142979] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
268[ 0.142994] pci 0000:00:1b.0: reg 0x10: [mem 0xe1630000-0xe1633fff 64bit]
269[ 0.143066] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
270[ 0.143096] pci 0000:00:1b.0: System wakeup disabled by ACPI
271[ 0.143135] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
272[ 0.143270] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
273[ 0.143347] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
274[ 0.143479] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
275[ 0.143558] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
276[ 0.143696] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
277[ 0.143778] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
278[ 0.143797] pci 0000:00:1d.0: reg 0x10: [mem 0xe1635c00-0xe1635fff]
279[ 0.143885] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
280[ 0.143916] pci 0000:00:1d.0: System wakeup disabled by ACPI
281[ 0.143954] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
282[ 0.144111] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
283[ 0.144130] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
284[ 0.144138] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
285[ 0.144146] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
286[ 0.144154] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
287[ 0.144163] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
288[ 0.144171] pci 0000:00:1f.2: reg 0x24: [mem 0xe1635000-0xe16357ff]
289[ 0.144220] pci 0000:00:1f.2: PME# supported from D3hot
290[ 0.144277] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
291[ 0.144290] pci 0000:00:1f.3: reg 0x10: [mem 0xe1636000-0xe16360ff 64bit]
292[ 0.144310] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
293[ 0.144491] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
294[ 0.144522] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
295[ 0.144556] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff]
296[ 0.144864] pci 0000:01:00.0: supports D1 D2
297[ 0.144866] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
298[ 0.154584] pci 0000:00:1c.0: PCI bridge to [bus 01]
299[ 0.154597] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
300[ 0.154851] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
301[ 0.155019] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe1501fff 64bit]
302[ 0.155780] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
303[ 0.166706] pci 0000:00:1c.1: PCI bridge to [bus 02]
304[ 0.166715] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
305[ 0.166818] pci 0000:00:1c.2: PCI bridge to [bus 03]
306[ 0.166823] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
307[ 0.166827] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
308[ 0.166836] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
309[ 0.166963] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
310[ 0.167002] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
311[ 0.167038] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
312[ 0.167074] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
313[ 0.167109] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
314[ 0.167144] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
315[ 0.167179] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
316[ 0.167214] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
317[ 0.167686] ACPI: Enabled 1 GPEs in block 00 to 3F
318[ 0.167727] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
319[ 0.167809] vgaarb: setting as boot device: PCI:0000:00:02.0
320[ 0.167811] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
321[ 0.167813] vgaarb: loaded
322[ 0.167813] vgaarb: bridge control possible 0000:00:02.0
323[ 0.167896] PCI: Using ACPI for IRQ routing
324[ 0.169366] PCI: pci_cache_line_size set to 64 bytes
325[ 0.169475] e820: reserve RAM buffer [mem 0xbfeac000-0xbfffffff]
326[ 0.169477] e820: reserve RAM buffer [mem 0x43b600000-0x43bffffff]
327[ 0.169593] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
328[ 0.169596] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
329[ 0.171625] Switched to clocksource hpet
330[ 0.175780] pnp: PnP ACPI init
331[ 0.175856] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
332[ 0.175858] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
333[ 0.175860] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
334[ 0.175861] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
335[ 0.175863] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
336[ 0.175864] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
337[ 0.175866] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
338[ 0.175867] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
339[ 0.175868] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
340[ 0.175870] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
341[ 0.175873] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
342[ 0.176286] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
343[ 0.176288] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
344[ 0.176321] system 00:02: [io 0x0500-0x057f] could not be reserved
345[ 0.176323] system 00:02: [io 0x0480-0x04bf] has been reserved
346[ 0.176324] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
347[ 0.176343] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
348[ 0.176375] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
349[ 0.176401] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
350[ 0.176418] pnp: PnP ACPI: found 6 devices
351[ 0.182603] pci 0000:00:1c.0: PCI bridge to [bus 01]
352[ 0.182611] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
353[ 0.182623] pci 0000:00:1c.1: PCI bridge to [bus 02]
354[ 0.182629] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
355[ 0.182641] pci 0000:00:1c.2: PCI bridge to [bus 03]
356[ 0.182644] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
357[ 0.182650] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
358[ 0.182656] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
359[ 0.182665] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
360[ 0.182666] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
361[ 0.182668] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
362[ 0.182669] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
363[ 0.182670] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
364[ 0.182672] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
365[ 0.182673] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
366[ 0.182674] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
367[ 0.182675] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
368[ 0.182677] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
369[ 0.182678] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
370[ 0.182679] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
371[ 0.182681] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
372[ 0.182682] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
373[ 0.182683] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
374[ 0.182685] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
375[ 0.182686] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xefffffff window]
376[ 0.182687] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
377[ 0.182689] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
378[ 0.182690] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
379[ 0.182692] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
380[ 0.182693] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff]
381[ 0.182694] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
382[ 0.182743] NET: Registered protocol family 2
383[ 0.182923] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
384[ 0.183120] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
385[ 0.183228] TCP: Hash tables configured (established 131072 bind 65536)
386[ 0.183243] TCP: reno registered
387[ 0.183258] UDP hash table entries: 8192 (order: 6, 262144 bytes)
388[ 0.183302] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
389[ 0.183380] NET: Registered protocol family 1
390[ 0.183393] pci 0000:00:02.0: Video device with shadowed ROM
391[ 0.183844] PCI: CLS 64 bytes, default 64
392[ 0.183883] Unpacking initramfs...
393[ 0.419900] Freeing initrd memory: 15208K (ffff88003623c000 - ffff880037116000)
394[ 0.419910] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
395[ 0.419912] software IO TLB [mem 0xbbeac000-0xbfeac000] (64MB) mapped at [ffff8800bbeac000-ffff8800bfeabfff]
396[ 0.420110] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
397[ 0.420188] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
398[ 0.420194] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
399[ 0.420203] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b
400[ 0.420209] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b
401[ 0.420253] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
402[ 0.420309] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x408000 bytes, mapped to 0xffffc90005b80000
403[ 0.420311] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1376x768x32, linelength=5504
404[ 0.422038] Console: switching to colour frame buffer device 172x48
405[ 0.423694] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
406[ 0.423900] futex hash table entries: 1024 (order: 4, 65536 bytes)
407[ 0.423926] audit: initializing netlink subsys (disabled)
408[ 0.423949] audit: type=2000 audit(1433281900.420:1): initialized
409[ 0.424247] HugeTLB registered 2 MB page size, pre-allocated 0 pages
410[ 0.424265] zpool: loaded
411[ 0.424379] VFS: Disk quotas dquot_6.5.2
412[ 0.424396] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
413[ 0.424752] alg: No test for stdrng (krng)
414[ 0.424782] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
415[ 0.424818] io scheduler noop registered
416[ 0.424821] io scheduler deadline registered
417[ 0.424834] io scheduler cfq registered (default)
418[ 0.425446] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
419[ 0.425448] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
420[ 0.425453] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
421[ 0.425474] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
422[ 0.425475] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
423[ 0.425480] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
424[ 0.425501] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
425[ 0.425506] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
426[ 0.425511] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
427[ 0.425546] pciehp 0000:00:1c.2:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
428[ 0.425574] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
429[ 0.425578] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
430[ 0.425593] intel_idle: MWAIT substates: 0x21120
431[ 0.425594] intel_idle: v0.4 model 0x3A
432[ 0.425595] intel_idle: lapic_timer_reliable_states 0xffffffff
433[ 0.425760] GHES: HEST is not enabled!
434[ 0.425826] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
435[ 0.426167] Linux agpgart interface v0.103
436[ 0.426208] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
437[ 0.426209] AMD IOMMUv2 functionality not available on this system
438[ 0.426265] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
439[ 0.428284] serio: i8042 KBD port at 0x60,0x64 irq 1
440[ 0.428287] serio: i8042 AUX port at 0x60,0x64 irq 12
441[ 0.428384] mousedev: PS/2 mouse device common for all mice
442[ 0.428423] rtc_cmos 00:03: RTC can wake from S4
443[ 0.428548] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
444[ 0.428576] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
445[ 0.428585] Intel P-state driver initializing.
446[ 0.428699] ledtrig-cpu: registered to indicate activity on CPUs
447[ 0.429041] TCP: cubic registered
448[ 0.429188] NET: Registered protocol family 10
449[ 0.429546] mip6: Mobile IPv6
450[ 0.429554] NET: Registered protocol family 17
451[ 0.429564] mpls_gso: MPLS GSO support
452[ 0.429805] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
453[ 0.430290] registered taskstats version 1
454[ 0.430959] rtc_cmos 00:03: setting system clock to 2015-06-02 21:51:40 UTC (1433281900)
455[ 0.431066] PM: Hibernation image not present or could not be loaded.
456[ 0.431502] Freeing unused kernel memory: 1244K (ffffffff81901000 - ffffffff81a38000)
457[ 0.431504] Write protecting the kernel read-only data: 8192k
458[ 0.431879] Freeing unused kernel memory: 592K (ffff88000156c000 - ffff880001600000)
459[ 0.431992] Freeing unused kernel memory: 120K (ffff8800017e2000 - ffff880001800000)
460[ 0.490443] systemd-udevd[76]: starting version 215
461[ 0.490777] random: systemd-udevd urandom read with 3 bits of entropy available
462[ 0.506910] pps_core: LinuxPPS API ver. 1 registered
463[ 0.506915] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
464[ 0.507352] PTP clock support registered
465[ 0.507753] thermal LNXTHERM:00: registered as thermal_zone0
466[ 0.507758] ACPI: Thermal Zone [THM0] (75 C)
467[ 0.508482] ACPI: bus type USB registered
468[ 0.508529] usbcore: registered new interface driver usbfs
469[ 0.508548] usbcore: registered new interface driver hub
470[ 0.508577] usbcore: registered new device driver usb
471[ 0.508602] thermal LNXTHERM:01: registered as thermal_zone1
472[ 0.508607] ACPI: Thermal Zone [THM1] (27 C)
473[ 0.509139] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
474[ 0.509142] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
475[ 0.509260] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
476[ 0.509471] sdhci: Secure Digital Host Controller Interface driver
477[ 0.509473] sdhci: Copyright(c) Pierre Ossman
478[ 0.509877] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
479[ 0.510203] sdhci-pci 0000:01:00.0: No vmmc regulator found
480[ 0.510205] sdhci-pci 0000:01:00.0: No vqmmc regulator found
481[ 0.511181] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
482[ 0.511395] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
483[ 0.511400] ehci-pci: EHCI PCI platform driver
484[ 0.514968] SCSI subsystem initialized
485[ 0.517014] libata version 3.00 loaded.
486[ 0.701471] e1000e 0000:00:19.0 eth0: registered PHC clock
487[ 0.701479] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:6a:16:ab
488[ 0.701483] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
489[ 0.701540] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
490[ 0.701810] xhci_hcd 0000:00:14.0: xHCI Host Controller
491[ 0.701820] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
492[ 0.701955] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
493[ 0.701966] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
494[ 0.702103] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
495[ 0.702107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
496[ 0.702110] usb usb1: Product: xHCI Host Controller
497[ 0.702112] usb usb1: Manufacturer: Linux 4.0.0-1-amd64 xhci-hcd
498[ 0.702114] usb usb1: SerialNumber: 0000:00:14.0
499[ 0.702307] hub 1-0:1.0: USB hub found
500[ 0.702328] hub 1-0:1.0: 4 ports detected
501[ 0.702531] xhci_hcd 0000:00:14.0: xHCI Host Controller
502[ 0.702535] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
503[ 0.702650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
504[ 0.702653] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
505[ 0.702655] usb usb2: Product: xHCI Host Controller
506[ 0.702657] usb usb2: Manufacturer: Linux 4.0.0-1-amd64 xhci-hcd
507[ 0.702659] usb usb2: SerialNumber: 0000:00:14.0
508[ 0.702805] hub 2-0:1.0: USB hub found
509[ 0.702827] hub 2-0:1.0: 4 ports detected
510[ 0.703223] ehci-pci 0000:00:1a.0: EHCI Host Controller
511[ 0.703233] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
512[ 0.703254] ehci-pci 0000:00:1a.0: debug port 2
513[ 0.707155] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
514[ 0.707178] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe1635800
515[ 0.716360] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
516[ 0.716444] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
517[ 0.716447] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
518[ 0.716449] usb usb3: Product: EHCI Host Controller
519[ 0.716451] usb usb3: Manufacturer: Linux 4.0.0-1-amd64 ehci_hcd
520[ 0.716453] usb usb3: SerialNumber: 0000:00:1a.0
521[ 0.716715] hub 3-0:1.0: USB hub found
522[ 0.716725] hub 3-0:1.0: 3 ports detected
523[ 0.717020] ehci-pci 0000:00:1d.0: EHCI Host Controller
524[ 0.717027] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
525[ 0.717043] ehci-pci 0000:00:1d.0: debug port 2
526[ 0.720974] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
527[ 0.720993] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1635c00
528[ 0.724573] mmc0: new high speed SDXC card at address e624
529[ 0.725312] Driver 'mmcblk' needs updating - please use bus_type methods
530[ 0.725417] mmcblk0: mmc0:e624 SL128 119 GiB
531[ 0.732342] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
532[ 0.732382] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
533[ 0.732384] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
534[ 0.732386] usb usb4: Product: EHCI Host Controller
535[ 0.732388] usb usb4: Manufacturer: Linux 4.0.0-1-amd64 ehci_hcd
536[ 0.732389] usb usb4: SerialNumber: 0000:00:1d.0
537[ 0.732522] hub 4-0:1.0: USB hub found
538[ 0.732529] hub 4-0:1.0: 3 ports detected
539[ 0.732684] ahci 0000:00:1f.2: version 3.0
540[ 0.732889] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
541[ 0.737614] mmcblk0: p1
542[ 0.748398] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
543[ 0.748403] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
544[ 0.749192] scsi host0: ahci
545[ 0.749390] scsi host1: ahci
546[ 0.749529] scsi host2: ahci
547[ 0.749677] scsi host3: ahci
548[ 0.749862] scsi host4: ahci
549[ 0.750008] scsi host5: ahci
550[ 0.750071] ata1: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635100 irq 29
551[ 0.750074] ata2: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635180 irq 29
552[ 0.750076] ata3: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635200 irq 29
553[ 0.750078] ata4: DUMMY
554[ 0.750079] ata5: DUMMY
555[ 0.750080] ata6: DUMMY
556[ 1.012744] usb 1-4: new high-speed USB device number 2 using xhci_hcd
557[ 1.028745] usb 3-1: new high-speed USB device number 2 using ehci-pci
558[ 1.044775] usb 4-1: new high-speed USB device number 2 using ehci-pci
559[ 1.072816] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
560[ 1.073181] ata1.00: supports DRM functions and may not be fully accessible
561[ 1.073392] ata1.00: disabling queued TRIM support
562[ 1.073397] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133
563[ 1.073401] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
564[ 1.074297] ata1.00: supports DRM functions and may not be fully accessible
565[ 1.074507] ata1.00: disabling queued TRIM support
566[ 1.075069] ata1.00: configured for UDMA/133
567[ 1.075399] scsi 0:0:0:0: Direct-Access ATA Crucial_CT960M50 MU02 PQ: 0 ANSI: 5
568[ 1.161346] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
569[ 1.161352] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
570[ 1.161783] hub 3-1:1.0: USB hub found
571[ 1.161932] hub 3-1:1.0: 6 ports detected
572[ 1.177322] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
573[ 1.177326] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
574[ 1.177769] hub 4-1:1.0: USB hub found
575[ 1.177971] hub 4-1:1.0: 8 ports detected
576[ 1.208343] usb 1-4: New USB device found, idVendor=05c6, idProduct=9205
577[ 1.208349] usb 1-4: New USB device strings: Mfr=4, Product=3, SerialNumber=0
578[ 1.208352] usb 1-4: Product: Qualcomm Gobi 2000
579[ 1.208355] usb 1-4: Manufacturer: Qualcomm Incorporated
580[ 1.393239] ata2: SATA link down (SStatus 0 SControl 300)
581[ 1.421231] tsc: Refined TSC clocksource calibration: 2793.653 MHz
582[ 1.433434] usb 3-1.3: new full-speed USB device number 3 using ehci-pci
583[ 1.449448] usb 4-1.6: new full-speed USB device number 3 using ehci-pci
584[ 1.526669] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020
585[ 1.526674] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
586[ 1.526677] usb 3-1.3: Product: Biometric Coprocessor
587[ 1.526680] usb 3-1.3: Manufacturer: Auth
588[ 1.547532] usb 4-1.6: New USB device found, idVendor=08e6, idProduct=34ec
589[ 1.547538] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
590[ 1.547556] usb 4-1.6: Product: GemPC Express
591[ 1.547558] usb 4-1.6: Manufacturer: Gemplus
592[ 1.597621] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
593[ 1.693472] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
594[ 1.693477] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
595[ 1.693480] usb 3-1.4: Product: BCM20702A0
596[ 1.693483] usb 3-1.4: Manufacturer: Broadcom Corp
597[ 1.693485] usb 3-1.4: SerialNumber: 2016D8D6A3C7
598[ 1.721612] ata3: SATA link down (SStatus 0 SControl 300)
599[ 1.725698] ata1.00: Enabling discard_zeroes_data
600[ 1.725740] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
601[ 1.725746] sd 0:0:0:0: [sda] 4096-byte physical blocks
602[ 1.725971] sd 0:0:0:0: [sda] Write Protect is off
603[ 1.725975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
604[ 1.726023] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
605[ 1.726216] ata1.00: Enabling discard_zeroes_data
606[ 1.727916] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda8
607[ 1.728561] ata1.00: Enabling discard_zeroes_data
608[ 1.728853] sd 0:0:0:0: [sda] Attached SCSI disk
609[ 1.729707] sd 0:0:0:0: Attached scsi generic sg0 type 0
610[ 1.765821] usb 3-1.6: new high-speed USB device number 5 using ehci-pci
611[ 1.841713] raid6: sse2x1 4690 MB/s
612[ 1.865554] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d2
613[ 1.865557] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
614[ 1.865559] usb 3-1.6: Product: Integrated Camera
615[ 1.865561] usb 3-1.6: Manufacturer: Ricoh Company Ltd.
616[ 1.909788] raid6: sse2x2 7666 MB/s
617[ 1.977868] raid6: sse2x4 11356 MB/s
618[ 1.977869] raid6: using algorithm sse2x4 (11356 MB/s)
619[ 1.977870] raid6: using ssse3x2 recovery algorithm
620[ 1.978292] xor: automatically using best checksumming function:
621[ 2.017926] avx : 10585.000 MB/sec
622[ 2.023328] Btrfs loaded
623[ 2.175930] SGI XFS with ACLs, security attributes, realtime, no debug enabled
624[ 2.191242] XFS (sda6): Mounting V4 Filesystem
625[ 2.214395] XFS (sda6): Ending clean mount
626[ 2.274914] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
627[ 2.394529] lp: driver loaded but no devices found
628[ 2.396406] ppdev: user-space parallel port driver
629[ 2.399715] fuse init (API version 7.23)
630[ 2.409647] systemd-udevd[215]: starting version 215
631[ 2.422630] Switched to clocksource tsc
632[ 2.484100] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input2
633[ 2.484107] ACPI: Sleep Button [SLPB]
634[ 2.484184] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input3
635[ 2.484272] ACPI: Lid Switch [LID]
636[ 2.484337] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
637[ 2.484340] ACPI: Power Button [PWRF]
638[ 2.484708] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
639[ 2.493660] [drm] Initialized drm 1.1.0 20060810
640[ 2.495909] ACPI: AC Adapter [AC] (on-line)
641[ 2.504194] Non-volatile memory driver v1.3
642[ 2.509250] ACPI: Battery Slot [BAT0] (battery present)
643[ 2.509348] ACPI: Battery Slot [BAT1] (battery absent)
644[ 2.525762] thinkpad_acpi: ThinkPad ACPI Extras v0.25
645[ 2.525765] thinkpad_acpi: http://ibm-acpi.sf.net/
646[ 2.525766] thinkpad_acpi: ThinkPad BIOS CBET4000 4.0-9846-g827674b-dirty, EC G2HT31WW-3.22
647[ 2.525767] thinkpad_acpi: Lenovo ThinkPad X230, model 2325TLU
648[ 2.525993] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
649[ 2.526402] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
650[ 2.526404] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
651[ 2.528035] [drm] Memory usable by graphics device = 2048M
652[ 2.528039] checking generic (d0000000 408000) vs hw (d0000000 10000000)
653[ 2.528040] fb: switching to inteldrmfb from simple
654[ 2.528067] Console: switching to colour dummy device 80x25
655[ 2.528133] [drm] Replacing VGA console driver
656[ 2.528926] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
657[ 2.528979] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
658[ 2.529531] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
659[ 2.543036] media: Linux media interface: v0.10
660[ 2.546216] usbcore: registered new interface driver usbserial
661[ 2.546228] Linux video capture interface: v2.00
662[ 2.546232] usbcore: registered new interface driver usbserial_generic
663[ 2.546242] usbserial: USB Serial support registered for generic
664[ 2.546426] cfg80211: Calling CRDA to update world regulatory domain
665[ 2.547816] usbcore: registered new interface driver qcserial
666[ 2.547829] usbserial: USB Serial support registered for Qualcomm USB modem
667[ 2.548726] qcserial 1-4:1.1: Qualcomm USB modem converter detected
668[ 2.548776] Bluetooth: Core ver 2.20
669[ 2.548788] NET: Registered protocol family 31
670[ 2.548790] Bluetooth: HCI device and connection manager initialized
671[ 2.548793] Bluetooth: HCI socket layer initialized
672[ 2.548796] Bluetooth: L2CAP socket layer initialized
673[ 2.548801] Bluetooth: SCO socket layer initialized
674[ 2.549083] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB0
675[ 2.549915] qcserial 1-4:1.2: Qualcomm USB modem converter detected
676[ 2.550347] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
677[ 2.550389] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB1
678[ 2.551453] Intel(R) Wireless WiFi driver for Linux
679[ 2.551458] Copyright(c) 2003- 2014 Intel Corporation
680[ 2.551586] qcserial 1-4:1.3: Qualcomm USB modem converter detected
681[ 2.551686] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB2
682[ 2.553209] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input6
683[ 2.553230] usbcore: registered new interface driver uvcvideo
684[ 2.553231] USB Video Class driver (1.1.1)
685[ 2.557027] usbcore: registered new interface driver btusb
686[ 2.557261] bluetooth hci0: firmware: failed to load brcm/BCM20702A0-0a5c-21e6.hcd (-2)
687[ 2.557266] bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0a5c-21e6.hcd failed with error -2
688[ 2.557269] Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0a5c-21e6.hcd not found
689[ 2.559489] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
690[ 2.559644] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
691[ 2.566499] input: PC Speaker as /devices/platform/pcspkr/input/input7
692[ 2.572492] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
693[ 2.572496] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
694[ 2.572497] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
695[ 2.572499] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
696[ 2.572780] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
697[ 2.574384] device-mapper: uevent: version 1.0.3
698[ 2.578183] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
699[ 2.579800] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
700[ 2.580241] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
701[ 2.582752] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
702[ 2.583651] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
703[ 2.590703] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
704[ 2.590705] [drm] Driver supports precise vblank timestamp query.
705[ 2.590769] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
706[ 2.593771] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
707[ 2.594132] AVX version of gcm_enc/dec engaged.
708[ 2.594134] AES CTR mode by8 optimization enabled
709[ 2.595832] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
710[ 2.598147] alg: No test for crc32 (crc32-pclmul)
711[ 2.622290] intel_rapl: Found RAPL domain package
712[ 2.622293] intel_rapl: Found RAPL domain core
713[ 2.622295] intel_rapl: Found RAPL domain uncore
714[ 2.630993] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
715[ 2.631689] cfg80211: World regulatory domain updated:
716[ 2.631692] cfg80211: DFS Master region: unset
717[ 2.631693] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
718[ 2.631694] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
719[ 2.631695] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
720[ 2.631696] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
721[ 2.631698] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
722[ 2.631699] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
723[ 2.631700] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
724[ 2.631701] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
725[ 2.631702] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
726[ 2.632712] acpi device:03: registered as cooling_device5
727[ 2.632765] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
728[ 2.633012] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
729[ 2.633099] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20150204/utaddress-258)
730[ 2.633104] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
731[ 2.633107] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20150204/utaddress-258)
732[ 2.633111] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
733[ 2.633112] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20150204/utaddress-258)
734[ 2.633115] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
735[ 2.633116] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20150204/utaddress-258)
736[ 2.633119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
737[ 2.633120] lpc_ich: Resource conflict(s) found affecting gpio_ich
738[ 2.633527] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
739[ 2.657217] iTCO_vendor_support: vendor-support=0
740[ 2.657676] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
741[ 2.657711] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
742[ 2.657768] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
743[ 2.659655] sound hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
744[ 2.659657] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
745[ 2.659659] sound hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
746[ 2.659660] sound hdaudioC0D0: mono: mono_out=0x0
747[ 2.659661] sound hdaudioC0D0: inputs:
748[ 2.659662] sound hdaudioC0D0: Mic=0x18
749[ 2.659663] sound hdaudioC0D0: Dock Mic=0x19
750[ 2.659664] sound hdaudioC0D0: Internal Mic=0x12
751[ 2.667631] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input10
752[ 2.668941] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
753[ 2.669049] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
754[ 2.669159] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
755[ 2.669226] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
756[ 2.669289] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
757[ 2.669351] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
758[ 2.669412] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
759[ 2.702835] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
760[ 2.720167] fbcon: inteldrmfb (fb0) is primary device
761[ 2.994595] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
762[ 2.994640] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
763[ 3.353127] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
764[ 3.385029] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
765[ 3.447744] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
766[ 3.447757] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
767[ 3.487174] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
768[ 3.504380] Console: switching to colour frame buffer device 170x48
769[ 3.507753] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
770[ 3.507755] i915 0000:00:02.0: registered panic notifier
771[ 3.537062] usbcore: registered new interface driver cdc_wdm
772[ 3.541918] qmi_wwan 1-4:1.0: cdc-wdm0: USB WDM device
773[ 3.542198] qmi_wwan 1-4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-4, WWAN/QMI device, 5e:02:55:1a:5e:4a
774[ 3.542287] usbcore: registered new interface driver qmi_wwan
775[ 5.947921] random: nonblocking pool is initialized
776[ 7.684902] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
777[ 7.886000] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input18
778[ 10.627909] NET: Registered protocol family 38
779[ 10.692015] XFS (dm-0): Mounting V4 Filesystem
780[ 10.928065] XFS (dm-0): Ending clean mount
781[ 10.945348] systemd-journald[218]: Received request to flush runtime journal from PID 1
782[ 11.316517] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
783[ 11.316520] Bluetooth: BNEP filters: protocol multicast
784[ 11.316525] Bluetooth: BNEP socket layer initialized
785[ 13.551175] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
786[ 13.558408] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
787[ 13.828634] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
788[ 13.835521] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
789[ 17.303649] wlan0: authenticate with f0:84:2f:e4:66:79
790[ 17.305945] wlan0: send auth to f0:84:2f:e4:66:79 (try 1/3)
791[ 17.308606] wlan0: authenticated
792[ 17.309086] wlan0: associate with f0:84:2f:e4:66:79 (try 1/3)
793[ 17.316821] wlan0: RX AssocResp from f0:84:2f:e4:66:79 (capab=0x411 status=0 aid=1)
794[ 17.342245] wlan0: associated
795[ 17.342329] cfg80211: Calling CRDA for country: CH
796[ 17.344191] cfg80211: Regulatory domain changed to country: CH
797[ 17.344194] cfg80211: DFS Master region: ETSI
798[ 17.344195] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
799[ 17.344197] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
800[ 17.344199] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
801[ 17.344200] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
802[ 17.344201] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
803[ 17.344202] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)