blob: 47151658b724239bc084b15512f6b057989309ad [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-16) ) #1 SMP Debian 4.0.2-1 (2015-05-11)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-1-amd64 root=UUID=f1361d3c-dc7b-42dd-8906-4cff95e9111d ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000bfeabfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfeac000-0x00000000bfffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000c29fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043b5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2325TLU/2325TLU, BIOS CBET4000 4.0-9846-g827674b-dirty 05/31/2015
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x43b600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0xbfeac max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b10000, 0x01b10fff] PGTABLE
[ 0.000000] BRK [0x01b11000, 0x01b11fff] PGTABLE
[ 0.000000] BRK [0x01b12000, 0x01b12fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x43b400000-0x43b5fffff]
[ 0.000000] [mem 0x43b400000-0x43b5fffff] page 2M
[ 0.000000] BRK [0x01b13000, 0x01b13fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x420000000-0x43b3fffff]
[ 0.000000] [mem 0x420000000-0x43b3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41fffffff]
[ 0.000000] [mem 0x400000000-0x41fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xbfeabfff]
[ 0.000000] [mem 0x40200000-0xbfdfffff] page 2M
[ 0.000000] [mem 0xbfe00000-0xbfeabfff] page 4k
[ 0.000000] BRK [0x01b14000, 0x01b14fff] PGTABLE
[ 0.000000] BRK [0x01b15000, 0x01b15fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x3623c000-0x37115fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0000 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000BFEC80E0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000BFECB6E0 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: DSDT 0x00000000BFEC8250 003484 (v02 COREv4 COREBOOT 20110725 INTL 20150410)
[ 0.000000] ACPI: FACS 0x00000000BFEC8210 000040
[ 0.000000] ACPI: SSDT 0x00000000BFECB7E0 0013FC (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: MCFG 0x00000000BFECCBE0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: TCPA 0x00000000BFECCC20 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000BFECCC60 00006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: HPET 0x00000000BFECCCD0 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043b5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x43b5ef000-0x43b5f2fff]
[ 0.000000] [ffffea0000000000-ffffea0010ffffff] PMD -> [ffff88042ac00000-ffff88043abfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000043b5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000003fffffff]
[ 0.000000] node 0: [mem 0x0000000040200000-0x00000000bfeabfff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000043b5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043b5fffff]
[ 0.000000] On node 0 totalpages: 4173899
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12203 pages used for memmap
[ 0.000000] DMA32 zone: 780972 pages, LIFO batch:31
[ 0.000000] Normal zone: 52952 pages used for memmap
[ 0.000000] Normal zone: 3388928 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xc0a00000-0xc29fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfeac000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xc29fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc2a00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[ 0.000000] e820: [mem 0xc2a00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88043b200000 s87256 r8192 d31528 u524288
[ 0.000000] pcpu-alloc: s87256 r8192 d31528 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4108658
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.0.0-1-amd64 root=UUID=f1361d3c-dc7b-42dd-8906-4cff95e9111d ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16339936K/16695596K available (5541K kernel code, 1020K rwdata, 1928K rodata, 1244K init, 832K bss, 355660K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2793.533 MHz processor
[ 0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.06 BogoMIPS (lpj=11174132)
[ 0.000031] pid_max: default: 32768 minimum: 301
[ 0.000036] ACPI: Core revision 20150204
[ 0.002466] ACPI: All ACPI Tables successfully acquired
[ 0.002586] Security Framework initialized
[ 0.002592] AppArmor: AppArmor disabled by boot time parameter
[ 0.002593] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.003385] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.006929] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008516] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008532] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008740] Initializing cgroup subsys blkio
[ 0.008742] Initializing cgroup subsys memory
[ 0.008746] Initializing cgroup subsys devices
[ 0.008748] Initializing cgroup subsys freezer
[ 0.008750] Initializing cgroup subsys net_cls
[ 0.008752] Initializing cgroup subsys perf_event
[ 0.008754] Initializing cgroup subsys net_prio
[ 0.008777] CPU: Physical Processor ID: 0
[ 0.008778] CPU: Processor Core ID: 0
[ 0.009115] mce: CPU supports 7 MCE banks
[ 0.009124] CPU0: Thermal monitoring enabled (TM1)
[ 0.009130] process: using mwait in idle threads
[ 0.009133] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.009134] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.009234] Freeing SMP alternatives memory: 24K (ffffffff81a38000 - ffffffff81a3e000)
[ 0.010281] ftrace: allocating 22346 entries in 88 pages
[ 0.018811] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.019262] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058996] TSC deadline timer enabled
[ 0.059000] smpboot: CPU0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
[ 0.059023] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.059040] ... version: 3
[ 0.059041] ... bit width: 48
[ 0.059042] ... generic registers: 4
[ 0.059042] ... value mask: 0000ffffffffffff
[ 0.059043] ... max period: 0000ffffffffffff
[ 0.059044] ... fixed-purpose events: 3
[ 0.059045] ... event mask: 000000070000000f
[ 0.059514] x86: Booting SMP configuration:
[ 0.059516] .... node #0, CPUs: #1
[ 0.072919] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.073003] #2 #3
[ 0.099805] x86: Booted up 1 node, 4 CPUs
[ 0.099808] smpboot: Total of 4 processors activated (22348.26 BogoMIPS)
[ 0.102627] devtmpfs: initialized
[ 0.105865] pinctrl core: initialized pinctrl subsystem
[ 0.105981] NET: Registered protocol family 16
[ 0.115826] cpuidle: using governor ladder
[ 0.126427] cpuidle: using governor menu
[ 0.126520] ACPI: bus type PCI registered
[ 0.126522] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.126593] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.126595] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.126662] PCI: Using configuration type 1 for base access
[ 0.136209] ACPI: Added _OSI(Module Device)
[ 0.136211] ACPI: Added _OSI(Processor Device)
[ 0.136212] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.136213] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.138502] ACPI: Interpreter enabled
[ 0.138507] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.138511] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.138521] ACPI: (supports S0 S3 S4 S5)
[ 0.138523] ACPI: Using IOAPIC for interrupt routing
[ 0.138542] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.141899] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.141904] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.141943] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.141990] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.142107] PCI host bridge to bus 0000:00
[ 0.142109] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.142111] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.142112] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.142114] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.142115] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.142116] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.142118] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.142119] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.142120] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.142121] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.142123] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.142124] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.142125] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.142127] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.142128] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.142129] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.142130] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.142132] pci_bus 0000:00: root bus resource [mem 0xc2a00000-0xefffffff window]
[ 0.142133] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[ 0.142139] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.142213] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.142223] pci 0000:00:02.0: reg 0x10: [mem 0xe1000000-0xe13fffff 64bit]
[ 0.142228] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.142233] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.142318] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.142339] pci 0000:00:14.0: reg 0x10: [mem 0xe1620000-0xe162ffff 64bit]
[ 0.142408] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.142438] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.142476] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.142497] pci 0000:00:16.0: reg 0x10: [mem 0xe1636100-0xe163610f 64bit]
[ 0.142577] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.142646] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.142662] pci 0000:00:19.0: reg 0x10: [mem 0xe1600000-0xe161ffff]
[ 0.142670] pci 0000:00:19.0: reg 0x14: [mem 0xe1634000-0xe1634fff]
[ 0.142677] pci 0000:00:19.0: reg 0x18: [io 0x3040-0x305f]
[ 0.142739] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.142802] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.142822] pci 0000:00:1a.0: reg 0x10: [mem 0xe1635800-0xe1635bff]
[ 0.142910] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.142941] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.142979] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.142994] pci 0000:00:1b.0: reg 0x10: [mem 0xe1630000-0xe1633fff 64bit]
[ 0.143066] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.143096] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.143135] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.143270] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.143347] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.143479] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.143558] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.143696] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.143778] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.143797] pci 0000:00:1d.0: reg 0x10: [mem 0xe1635c00-0xe1635fff]
[ 0.143885] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.143916] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.143954] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.144111] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.144130] pci 0000:00:1f.2: reg 0x10: [io 0x3080-0x3087]
[ 0.144138] pci 0000:00:1f.2: reg 0x14: [io 0x3090-0x3093]
[ 0.144146] pci 0000:00:1f.2: reg 0x18: [io 0x3088-0x308f]
[ 0.144154] pci 0000:00:1f.2: reg 0x1c: [io 0x3094-0x3097]
[ 0.144163] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.144171] pci 0000:00:1f.2: reg 0x24: [mem 0xe1635000-0xe16357ff]
[ 0.144220] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.144277] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.144290] pci 0000:00:1f.3: reg 0x10: [mem 0xe1636000-0xe16360ff 64bit]
[ 0.144310] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.144491] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.144522] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.144556] pci 0000:01:00.0: reg 0x10: [mem 0xe1400000-0xe14000ff]
[ 0.144864] pci 0000:01:00.0: supports D1 D2
[ 0.144866] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.154584] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.154597] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.154851] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
[ 0.155019] pci 0000:02:00.0: reg 0x10: [mem 0xe1500000-0xe1501fff 64bit]
[ 0.155780] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.166706] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.166715] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.166818] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.166823] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.166827] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.166836] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.166963] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.167002] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.167038] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.167074] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.167109] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.167144] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.167179] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12 14 15) *11
[ 0.167214] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 0.167686] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.167727] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.167809] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.167811] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.167813] vgaarb: loaded
[ 0.167813] vgaarb: bridge control possible 0000:00:02.0
[ 0.167896] PCI: Using ACPI for IRQ routing
[ 0.169366] PCI: pci_cache_line_size set to 64 bytes
[ 0.169475] e820: reserve RAM buffer [mem 0xbfeac000-0xbfffffff]
[ 0.169477] e820: reserve RAM buffer [mem 0x43b600000-0x43bffffff]
[ 0.169593] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.169596] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.171625] Switched to clocksource hpet
[ 0.175780] pnp: PnP ACPI init
[ 0.175856] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.175858] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.175860] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.175861] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.175863] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.175864] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.175866] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.175867] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.175868] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[ 0.175870] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[ 0.175873] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176286] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.176288] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.176321] system 00:02: [io 0x0500-0x057f] could not be reserved
[ 0.176323] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.176324] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176343] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.176375] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.176401] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.176418] pnp: PnP ACPI: found 6 devices
[ 0.182603] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.182611] pci 0000:00:1c.0: bridge window [mem 0xe1400000-0xe14fffff]
[ 0.182623] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.182629] pci 0000:00:1c.1: bridge window [mem 0xe1500000-0xe15fffff]
[ 0.182641] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.182644] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.182650] pci 0000:00:1c.2: bridge window [mem 0xe0800000-0xe0ffffff]
[ 0.182656] pci 0000:00:1c.2: bridge window [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.182665] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.182666] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.182668] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.182669] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.182670] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.182672] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.182673] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.182674] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.182675] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.182677] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.182678] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.182679] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.182681] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.182682] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.182683] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.182685] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 0.182686] pci_bus 0000:00: resource 20 [mem 0xc2a00000-0xefffffff window]
[ 0.182687] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[ 0.182689] pci_bus 0000:01: resource 1 [mem 0xe1400000-0xe14fffff]
[ 0.182690] pci_bus 0000:02: resource 1 [mem 0xe1500000-0xe15fffff]
[ 0.182692] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.182693] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe0ffffff]
[ 0.182694] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xe07fffff 64bit pref]
[ 0.182743] NET: Registered protocol family 2
[ 0.182923] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.183120] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.183228] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.183243] TCP: reno registered
[ 0.183258] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.183302] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.183380] NET: Registered protocol family 1
[ 0.183393] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.183844] PCI: CLS 64 bytes, default 64
[ 0.183883] Unpacking initramfs...
[ 0.419900] Freeing initrd memory: 15208K (ffff88003623c000 - ffff880037116000)
[ 0.419910] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.419912] software IO TLB [mem 0xbbeac000-0xbfeac000] (64MB) mapped at [ffff8800bbeac000-ffff8800bfeabfff]
[ 0.420110] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.420188] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
[ 0.420194] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
[ 0.420203] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x1b
[ 0.420209] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x1b
[ 0.420253] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.420309] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x408000 bytes, mapped to 0xffffc90005b80000
[ 0.420311] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1376x768x32, linelength=5504
[ 0.422038] Console: switching to colour frame buffer device 172x48
[ 0.423694] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 0.423900] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.423926] audit: initializing netlink subsys (disabled)
[ 0.423949] audit: type=2000 audit(1433281900.420:1): initialized
[ 0.424247] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.424265] zpool: loaded
[ 0.424379] VFS: Disk quotas dquot_6.5.2
[ 0.424396] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.424752] alg: No test for stdrng (krng)
[ 0.424782] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.424818] io scheduler noop registered
[ 0.424821] io scheduler deadline registered
[ 0.424834] io scheduler cfq registered (default)
[ 0.425446] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.425448] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.425453] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.425474] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.425475] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.425480] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.425501] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.425506] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.425511] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.425546] pciehp 0000:00:1c.2:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.425574] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 0.425578] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.425593] intel_idle: MWAIT substates: 0x21120
[ 0.425594] intel_idle: v0.4 model 0x3A
[ 0.425595] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.425760] GHES: HEST is not enabled!
[ 0.425826] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.426167] Linux agpgart interface v0.103
[ 0.426208] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.426209] AMD IOMMUv2 functionality not available on this system
[ 0.426265] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.428284] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.428287] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.428384] mousedev: PS/2 mouse device common for all mice
[ 0.428423] rtc_cmos 00:03: RTC can wake from S4
[ 0.428548] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.428576] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.428585] Intel P-state driver initializing.
[ 0.428699] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.429041] TCP: cubic registered
[ 0.429188] NET: Registered protocol family 10
[ 0.429546] mip6: Mobile IPv6
[ 0.429554] NET: Registered protocol family 17
[ 0.429564] mpls_gso: MPLS GSO support
[ 0.429805] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.430290] registered taskstats version 1
[ 0.430959] rtc_cmos 00:03: setting system clock to 2015-06-02 21:51:40 UTC (1433281900)
[ 0.431066] PM: Hibernation image not present or could not be loaded.
[ 0.431502] Freeing unused kernel memory: 1244K (ffffffff81901000 - ffffffff81a38000)
[ 0.431504] Write protecting the kernel read-only data: 8192k
[ 0.431879] Freeing unused kernel memory: 592K (ffff88000156c000 - ffff880001600000)
[ 0.431992] Freeing unused kernel memory: 120K (ffff8800017e2000 - ffff880001800000)
[ 0.490443] systemd-udevd[76]: starting version 215
[ 0.490777] random: systemd-udevd urandom read with 3 bits of entropy available
[ 0.506910] pps_core: LinuxPPS API ver. 1 registered
[ 0.506915] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.507352] PTP clock support registered
[ 0.507753] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.507758] ACPI: Thermal Zone [THM0] (75 C)
[ 0.508482] ACPI: bus type USB registered
[ 0.508529] usbcore: registered new interface driver usbfs
[ 0.508548] usbcore: registered new interface driver hub
[ 0.508577] usbcore: registered new device driver usb
[ 0.508602] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.508607] ACPI: Thermal Zone [THM1] (27 C)
[ 0.509139] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.509142] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 0.509260] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.509471] sdhci: Secure Digital Host Controller Interface driver
[ 0.509473] sdhci: Copyright(c) Pierre Ossman
[ 0.509877] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 0.510203] sdhci-pci 0000:01:00.0: No vmmc regulator found
[ 0.510205] sdhci-pci 0000:01:00.0: No vqmmc regulator found
[ 0.511181] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.511395] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 0.511400] ehci-pci: EHCI PCI platform driver
[ 0.514968] SCSI subsystem initialized
[ 0.517014] libata version 3.00 loaded.
[ 0.701471] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.701479] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:6a:16:ab
[ 0.701483] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.701540] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 0.701810] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.701820] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.701955] xhci_hcd 0000:00:14.0: hcc params 0x200071a1 hci version 0x100 quirks 0x0000b930
[ 0.701966] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.702103] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.702107] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.702110] usb usb1: Product: xHCI Host Controller
[ 0.702112] usb usb1: Manufacturer: Linux 4.0.0-1-amd64 xhci-hcd
[ 0.702114] usb usb1: SerialNumber: 0000:00:14.0
[ 0.702307] hub 1-0:1.0: USB hub found
[ 0.702328] hub 1-0:1.0: 4 ports detected
[ 0.702531] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.702535] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.702650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.702653] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.702655] usb usb2: Product: xHCI Host Controller
[ 0.702657] usb usb2: Manufacturer: Linux 4.0.0-1-amd64 xhci-hcd
[ 0.702659] usb usb2: SerialNumber: 0000:00:14.0
[ 0.702805] hub 2-0:1.0: USB hub found
[ 0.702827] hub 2-0:1.0: 4 ports detected
[ 0.703223] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.703233] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.703254] ehci-pci 0000:00:1a.0: debug port 2
[ 0.707155] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.707178] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe1635800
[ 0.716360] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.716444] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.716447] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.716449] usb usb3: Product: EHCI Host Controller
[ 0.716451] usb usb3: Manufacturer: Linux 4.0.0-1-amd64 ehci_hcd
[ 0.716453] usb usb3: SerialNumber: 0000:00:1a.0
[ 0.716715] hub 3-0:1.0: USB hub found
[ 0.716725] hub 3-0:1.0: 3 ports detected
[ 0.717020] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.717027] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 0.717043] ehci-pci 0000:00:1d.0: debug port 2
[ 0.720974] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.720993] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe1635c00
[ 0.724573] mmc0: new high speed SDXC card at address e624
[ 0.725312] Driver 'mmcblk' needs updating - please use bus_type methods
[ 0.725417] mmcblk0: mmc0:e624 SL128 119 GiB
[ 0.732342] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.732382] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.732384] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.732386] usb usb4: Product: EHCI Host Controller
[ 0.732388] usb usb4: Manufacturer: Linux 4.0.0-1-amd64 ehci_hcd
[ 0.732389] usb usb4: SerialNumber: 0000:00:1d.0
[ 0.732522] hub 4-0:1.0: USB hub found
[ 0.732529] hub 4-0:1.0: 3 ports detected
[ 0.732684] ahci 0000:00:1f.2: version 3.0
[ 0.732889] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.737614] mmcblk0: p1
[ 0.748398] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 0.748403] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 0.749192] scsi host0: ahci
[ 0.749390] scsi host1: ahci
[ 0.749529] scsi host2: ahci
[ 0.749677] scsi host3: ahci
[ 0.749862] scsi host4: ahci
[ 0.750008] scsi host5: ahci
[ 0.750071] ata1: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635100 irq 29
[ 0.750074] ata2: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635180 irq 29
[ 0.750076] ata3: SATA max UDMA/133 abar m2048@0xe1635000 port 0xe1635200 irq 29
[ 0.750078] ata4: DUMMY
[ 0.750079] ata5: DUMMY
[ 0.750080] ata6: DUMMY
[ 1.012744] usb 1-4: new high-speed USB device number 2 using xhci_hcd
[ 1.028745] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.044775] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.072816] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.073181] ata1.00: supports DRM functions and may not be fully accessible
[ 1.073392] ata1.00: disabling queued TRIM support
[ 1.073397] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133
[ 1.073401] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.074297] ata1.00: supports DRM functions and may not be fully accessible
[ 1.074507] ata1.00: disabling queued TRIM support
[ 1.075069] ata1.00: configured for UDMA/133
[ 1.075399] scsi 0:0:0:0: Direct-Access ATA Crucial_CT960M50 MU02 PQ: 0 ANSI: 5
[ 1.161346] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.161352] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.161783] hub 3-1:1.0: USB hub found
[ 1.161932] hub 3-1:1.0: 6 ports detected
[ 1.177322] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.177326] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.177769] hub 4-1:1.0: USB hub found
[ 1.177971] hub 4-1:1.0: 8 ports detected
[ 1.208343] usb 1-4: New USB device found, idVendor=05c6, idProduct=9205
[ 1.208349] usb 1-4: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 1.208352] usb 1-4: Product: Qualcomm Gobi 2000
[ 1.208355] usb 1-4: Manufacturer: Qualcomm Incorporated
[ 1.393239] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.421231] tsc: Refined TSC clocksource calibration: 2793.653 MHz
[ 1.433434] usb 3-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.449448] usb 4-1.6: new full-speed USB device number 3 using ehci-pci
[ 1.526669] usb 3-1.3: New USB device found, idVendor=147e, idProduct=2020
[ 1.526674] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.526677] usb 3-1.3: Product: Biometric Coprocessor
[ 1.526680] usb 3-1.3: Manufacturer: Auth
[ 1.547532] usb 4-1.6: New USB device found, idVendor=08e6, idProduct=34ec
[ 1.547538] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.547556] usb 4-1.6: Product: GemPC Express
[ 1.547558] usb 4-1.6: Manufacturer: Gemplus
[ 1.597621] usb 3-1.4: new full-speed USB device number 4 using ehci-pci
[ 1.693472] usb 3-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[ 1.693477] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.693480] usb 3-1.4: Product: BCM20702A0
[ 1.693483] usb 3-1.4: Manufacturer: Broadcom Corp
[ 1.693485] usb 3-1.4: SerialNumber: 2016D8D6A3C7
[ 1.721612] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.725698] ata1.00: Enabling discard_zeroes_data
[ 1.725740] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
[ 1.725746] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.725971] sd 0:0:0:0: [sda] Write Protect is off
[ 1.725975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.726023] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.726216] ata1.00: Enabling discard_zeroes_data
[ 1.727916] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda8
[ 1.728561] ata1.00: Enabling discard_zeroes_data
[ 1.728853] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.729707] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.765821] usb 3-1.6: new high-speed USB device number 5 using ehci-pci
[ 1.841713] raid6: sse2x1 4690 MB/s
[ 1.865554] usb 3-1.6: New USB device found, idVendor=5986, idProduct=02d2
[ 1.865557] usb 3-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.865559] usb 3-1.6: Product: Integrated Camera
[ 1.865561] usb 3-1.6: Manufacturer: Ricoh Company Ltd.
[ 1.909788] raid6: sse2x2 7666 MB/s
[ 1.977868] raid6: sse2x4 11356 MB/s
[ 1.977869] raid6: using algorithm sse2x4 (11356 MB/s)
[ 1.977870] raid6: using ssse3x2 recovery algorithm
[ 1.978292] xor: automatically using best checksumming function:
[ 2.017926] avx : 10585.000 MB/sec
[ 2.023328] Btrfs loaded
[ 2.175930] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 2.191242] XFS (sda6): Mounting V4 Filesystem
[ 2.214395] XFS (sda6): Ending clean mount
[ 2.274914] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 2.394529] lp: driver loaded but no devices found
[ 2.396406] ppdev: user-space parallel port driver
[ 2.399715] fuse init (API version 7.23)
[ 2.409647] systemd-udevd[215]: starting version 215
[ 2.422630] Switched to clocksource tsc
[ 2.484100] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0E:00/input/input2
[ 2.484107] ACPI: Sleep Button [SLPB]
[ 2.484184] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:1f/PNP0C09:00/PNP0C0D:00/input/input3
[ 2.484272] ACPI: Lid Switch [LID]
[ 2.484337] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.484340] ACPI: Power Button [PWRF]
[ 2.484708] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.493660] [drm] Initialized drm 1.1.0 20060810
[ 2.495909] ACPI: AC Adapter [AC] (on-line)
[ 2.504194] Non-volatile memory driver v1.3
[ 2.509250] ACPI: Battery Slot [BAT0] (battery present)
[ 2.509348] ACPI: Battery Slot [BAT1] (battery absent)
[ 2.525762] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 2.525765] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.525766] thinkpad_acpi: ThinkPad BIOS CBET4000 4.0-9846-g827674b-dirty, EC G2HT31WW-3.22
[ 2.525767] thinkpad_acpi: Lenovo ThinkPad X230, model 2325TLU
[ 2.525993] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.526402] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.526404] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.528035] [drm] Memory usable by graphics device = 2048M
[ 2.528039] checking generic (d0000000 408000) vs hw (d0000000 10000000)
[ 2.528040] fb: switching to inteldrmfb from simple
[ 2.528067] Console: switching to colour dummy device 80x25
[ 2.528133] [drm] Replacing VGA console driver
[ 2.528926] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.528979] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.529531] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 2.543036] media: Linux media interface: v0.10
[ 2.546216] usbcore: registered new interface driver usbserial
[ 2.546228] Linux video capture interface: v2.00
[ 2.546232] usbcore: registered new interface driver usbserial_generic
[ 2.546242] usbserial: USB Serial support registered for generic
[ 2.546426] cfg80211: Calling CRDA to update world regulatory domain
[ 2.547816] usbcore: registered new interface driver qcserial
[ 2.547829] usbserial: USB Serial support registered for Qualcomm USB modem
[ 2.548726] qcserial 1-4:1.1: Qualcomm USB modem converter detected
[ 2.548776] Bluetooth: Core ver 2.20
[ 2.548788] NET: Registered protocol family 31
[ 2.548790] Bluetooth: HCI device and connection manager initialized
[ 2.548793] Bluetooth: HCI socket layer initialized
[ 2.548796] Bluetooth: L2CAP socket layer initialized
[ 2.548801] Bluetooth: SCO socket layer initialized
[ 2.549083] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB0
[ 2.549915] qcserial 1-4:1.2: Qualcomm USB modem converter detected
[ 2.550347] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
[ 2.550389] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB1
[ 2.551453] Intel(R) Wireless WiFi driver for Linux
[ 2.551458] Copyright(c) 2003- 2014 Intel Corporation
[ 2.551586] qcserial 1-4:1.3: Qualcomm USB modem converter detected
[ 2.551686] usb 1-4: Qualcomm USB modem converter now attached to ttyUSB2
[ 2.553209] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.6/3-1.6:1.0/input/input6
[ 2.553230] usbcore: registered new interface driver uvcvideo
[ 2.553231] USB Video Class driver (1.1.1)
[ 2.557027] usbcore: registered new interface driver btusb
[ 2.557261] bluetooth hci0: firmware: failed to load brcm/BCM20702A0-0a5c-21e6.hcd (-2)
[ 2.557266] bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0a5c-21e6.hcd failed with error -2
[ 2.557269] Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0a5c-21e6.hcd not found
[ 2.559489] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-6000g2a-6.ucode
[ 2.559644] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 2.566499] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 2.572492] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 2.572496] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 2.572497] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 2.572499] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 2.572780] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 2.574384] device-mapper: uevent: version 1.0.3
[ 2.578183] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 2.579800] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
[ 2.580241] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 2.582752] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2.583651] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 2.590703] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.590705] [drm] Driver supports precise vblank timestamp query.
[ 2.590769] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.593771] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.594132] AVX version of gcm_enc/dec engaged.
[ 2.594134] AES CTR mode by8 optimization enabled
[ 2.595832] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 2.598147] alg: No test for crc32 (crc32-pclmul)
[ 2.622290] intel_rapl: Found RAPL domain package
[ 2.622293] intel_rapl: Found RAPL domain core
[ 2.622295] intel_rapl: Found RAPL domain uncore
[ 2.630993] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.631689] cfg80211: World regulatory domain updated:
[ 2.631692] cfg80211: DFS Master region: unset
[ 2.631693] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 2.631694] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.631695] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.631696] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.631698] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 2.631699] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 2.631700] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 2.631701] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 2.631702] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 2.632712] acpi device:03: registered as cooling_device5
[ 2.632765] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[ 2.633012] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
[ 2.633099] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20150204/utaddress-258)
[ 2.633104] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.633107] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20150204/utaddress-258)
[ 2.633111] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.633112] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20150204/utaddress-258)
[ 2.633115] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.633116] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20150204/utaddress-258)
[ 2.633119] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.633120] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.633527] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 2.657217] iTCO_vendor_support: vendor-support=0
[ 2.657676] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.657711] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 2.657768] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.659655] sound hdaudioC0D0: autoconfig for ALC269VC: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 2.659657] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 2.659659] sound hdaudioC0D0: hp_outs=2 (0x15/0x1b/0x0/0x0/0x0)
[ 2.659660] sound hdaudioC0D0: mono: mono_out=0x0
[ 2.659661] sound hdaudioC0D0: inputs:
[ 2.659662] sound hdaudioC0D0: Mic=0x18
[ 2.659663] sound hdaudioC0D0: Dock Mic=0x19
[ 2.659664] sound hdaudioC0D0: Internal Mic=0x12
[ 2.667631] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input10
[ 2.668941] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.669049] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.669159] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.669226] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 2.669289] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 2.669351] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 2.669412] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 2.702835] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 2.720167] fbcon: inteldrmfb (fb0) is primary device
[ 2.994595] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 2.994640] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[ 3.353127] psmouse serio1: synaptics: queried max coordinates: x [..5768], y [..5062]
[ 3.385029] psmouse serio1: synaptics: queried min coordinates: x [1174..], y [790..]
[ 3.447744] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
[ 3.447757] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 3.487174] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 3.504380] Console: switching to colour frame buffer device 170x48
[ 3.507753] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.507755] i915 0000:00:02.0: registered panic notifier
[ 3.537062] usbcore: registered new interface driver cdc_wdm
[ 3.541918] qmi_wwan 1-4:1.0: cdc-wdm0: USB WDM device
[ 3.542198] qmi_wwan 1-4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:14.0-4, WWAN/QMI device, 5e:02:55:1a:5e:4a
[ 3.542287] usbcore: registered new interface driver qmi_wwan
[ 5.947921] random: nonblocking pool is initialized
[ 7.684902] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 7.886000] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input18
[ 10.627909] NET: Registered protocol family 38
[ 10.692015] XFS (dm-0): Mounting V4 Filesystem
[ 10.928065] XFS (dm-0): Ending clean mount
[ 10.945348] systemd-journald[218]: Received request to flush runtime journal from PID 1
[ 11.316517] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.316520] Bluetooth: BNEP filters: protocol multicast
[ 11.316525] Bluetooth: BNEP socket layer initialized
[ 13.551175] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 13.558408] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 13.828634] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[ 13.835521] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 17.303649] wlan0: authenticate with f0:84:2f:e4:66:79
[ 17.305945] wlan0: send auth to f0:84:2f:e4:66:79 (try 1/3)
[ 17.308606] wlan0: authenticated
[ 17.309086] wlan0: associate with f0:84:2f:e4:66:79 (try 1/3)
[ 17.316821] wlan0: RX AssocResp from f0:84:2f:e4:66:79 (capab=0x411 status=0 aid=1)
[ 17.342245] wlan0: associated
[ 17.342329] cfg80211: Calling CRDA for country: CH
[ 17.344191] cfg80211: Regulatory domain changed to country: CH
[ 17.344194] cfg80211: DFS Master region: ETSI
[ 17.344195] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 17.344197] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 17.344199] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 17.344200] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 17.344201] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 17.344202] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)