lenovo/t420/4.9-1860-g2761847/2019-06-02T04_11_29Z/coreboot_console.txt

Sorry, try again.
*** Pre-CBMEM romstage console overflowed, log truncated! ***
0T
Selected tWR           : 8T
Selected tFAW          : 20T
Selected tRRD          : 4T
Selected tRTP          : 4T
Selected tWTR          : 4T
Selected tRFC          : 59T
Done dimm mapping
Update PCI-E configuration space:
PCI(0, 0, 0)[a0] = 80000000
PCI(0, 0, 0)[a4] = 0
PCI(0, 0, 0)[bc] = 7da00000
PCI(0, 0, 0)[a8] = 600000
PCI(0, 0, 0)[ac] = 1
PCI(0, 0, 0)[b8] = 7b000000
PCI(0, 0, 0)[b0] = 7ba00000
PCI(0, 0, 0)[b4] = 7b800000
PCI(0, 0, 0)[7c] = 7f
PCI(0, 0, 0)[70] = 7e000000
PCI(0, 0, 0)[74] = 0
PCI(0, 0, 0)[78] = fe000c00
Done memory map
Done io registers
Done jedec reset
Done MRS commands
t123: 2128, 6000, 7620
ME: FW Partition Table      : OK
ME: Bringup Loader Failure  : NO
ME: Firmware Init Complete  : NO
ME: Manufacturing Mode      : NO
ME: Boot Options Present    : NO
ME: Update In Progress      : NO
ME: Current Working State   : Recovery
ME: Current Operation State : Bring up
ME: Current Operation Mode  : Normal
ME: Error Code              : No Error
ME: Progress Phase          : BUP Phase
ME: Power Management Event  : Pseudo-global reset
ME: Progress Phase State    : 0x4e
ME: FWS2: 0x164e0002
ME:  Bist in progress: 0x0
ME:  ICC Status      : 0x1
ME:  Invoke MEBx     : 0x0
ME:  CPU replaced    : 0x0
ME:  MBP ready       : 0x0
ME:  MFS failure     : 0x0
ME:  Warm reset req  : 0x0
ME:  CPU repl valid  : 0x0
ME:  (Reserved)      : 0x0
ME:  FW update req   : 0x0
ME:  (Reserved)      : 0x0
ME:  Current state   : 0x4e
ME:  Current PM event: 0x6
ME:  Progress code   : 0x1
Waited long enough, or CPU was not replaced, continue...
PASSED! Tell ME that DRAM is ready
ME: FWS2: 0x162c0002
ME:  Bist in progress: 0x0
ME:  ICC Status      : 0x1
ME:  Invoke MEBx     : 0x0
ME:  CPU replaced    : 0x0
ME:  MBP ready       : 0x0
ME:  MFS failure     : 0x0
ME:  Warm reset req  : 0x0
ME:  CPU repl valid  : 0x0
ME:  (Reserved)      : 0x0
ME:  FW update req   : 0x0
ME:  (Reserved)      : 0x0
ME:  Current state   : 0x2c
ME:  Current PM event: 0x6
ME:  Progress code   : 0x1
ME: Requested BIOS Action: Continue to boot
ME: FW Partition Table      : OK
ME: Bringup Loader Failure  : NO
ME: Firmware Init Complete  : NO
ME: Manufacturing Mode      : NO
ME: Boot Options Present    : NO
ME: Update In Progress      : NO
ME: Current Working State   : Recovery
ME: Current Operation State : Bring up
ME: Current Operation Mode  : Normal
ME: Error Code              : No Error
ME: Progress Phase          : BUP Phase
ME: Power Management Event  : Pseudo-global reset
ME: Progress Phase State    : 0x2c
memcfg DDR3 ref clock 133 MHz
memcfg DDR3 clock 1064 MHz
memcfg channel assignment: A: 1, B  0, C  2
memcfg channel[0] config (00000000):
   ECC inactive
   enhanced interleave mode off
   rank interleave off
   DIMMA 0 MB width x8 single rank, selected
   DIMMB 0 MB width x8 single rank
memcfg channel[1] config (00620008):
   ECC inactive
   enhanced interleave mode on
   rank interleave on
   DIMMA 2048 MB width x8 dual rank, selected
   DIMMB 0 MB width x8 single rank
CBMEM:
IMD: root @ 7afff000 254 entries.
IMD: root @ 7affec00 62 entries.
External stage cache:
IMD: root @ 7b3ff000 254 entries.
IMD: root @ 7b3fec00 62 entries.
CBMEM entry for DIMM info: 0x7affe9e0
MTRR Range: Start=ff800000 End=0 (Size 800000)
MTRR Range: Start=0 End=1000000 (Size 1000000)
MTRR Range: Start=7a800000 End=7b000000 (Size 800000)
MTRR Range: Start=7b000000 End=7b800000 (Size 800000)
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'fallback/postcar'
CBFS: Found @ offset 3f8c0 size 4974
Decompressing stage fallback/postcar @ 0x7afcdfc0 (35608 bytes)
Loading module at 7afce000 with entry 7afce000. filesize: 0x46d0 memsize: 0x8ad8
Processing 146 relocs. Offset value of 0x78fce000


coreboot-4.9-1860-g2761847-dirty Sun Jun  2 04:11:29 UTC 2019 postcar starting (log level: 7)...
usbdebug: Failed hardware init
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'fallback/ramstage'
CBFS: Found @ offset 1b6c0 size 1c1f0
Decompressing stage fallback/ramstage @ 0x7af7cfc0 (327160 bytes)
Loading module at 7af7d000 with entry 7af7d000. filesize: 0x3a750 memsize: 0x4fdb8
Processing 4031 relocs. Offset value of 0x7a17d000


coreboot-4.9-1860-g2761847-dirty Sun Jun  2 04:11:29 UTC 2019 ramstage starting (log level: 7)...
usbdebug: Failed hardware init
Normal boot.
BS: BS_PRE_DEVICE times (us): entry 0 run 2 exit 0
BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 3 exit 0
Enumerating buses...
CPU_CLUSTER: 0 enabled
DOMAIN: 0000 enabled
PCI: pci_scan_bus for bus 00
PCI: 00:00.0 [8086/0154] enabled
PCI: Static device PCI: 00:01.0 not found, disabling it.
PCI: 00:02.0 [8086/0166] enabled
PCI: 00:04.0 [8086/0153] enabled
PCI: 00:16.0: Disabling device
PCI: 00:16.0 [8086/1c3a] disabled
PCI: 00:16.1: Disabling device
PCI: 00:16.2: Disabling device
PCI: 00:16.3: Disabling device
PCI: 00:19.0 [8086/1502] enabled
PCI: 00:1a.0 [8086/1c2d] enabled
PCI: 00:1b.0 [8086/1c20] enabled
PCH: PCIe Root Port coalescing is enabled
PCI: 00:1c.0: Disabling device
PCI: 00:1c.0: check set enabled
PCI: 00:1c.0 [8086/1c10] disabled
PCH: Remap PCIe function 1 to 0
PCI: 00:1c.1 [8086/1c12] enabled
PCI: 00:1c.2: Disabling device
PCI: 00:1c.2 [8086/1c14] disabled
PCH: Remap PCIe function 3 to 0
PCI: 00:1c.3 [8086/1c16] enabled
PCH: Remap PCIe function 4 to 0
PCI: 00:1c.4 [8086/1c18] enabled
PCI: 00:1c.5: Disabling device
PCI: 00:1c.5 [8086/1c1a] disabled
PCI: 00:1c.6: Disabling device
PCI: 00:1c.6 [8086/1c1c] disabled
PCI: 00:1c.7: Disabling device
PCH: PCIe map 1c.0 -> 1c.4
PCH: PCIe map 1c.1 -> 1c.0
PCH: PCIe map 1c.3 -> 1c.1
PCH: PCIe map 1c.4 -> 1c.3
PCI: 00:1d.0 [8086/1c26] enabled
PCI: 00:1e.0: Disabling device
PCI: 00:1e.0 [8086/2448] disabled
PCI: 00:1f.0 [8086/1c4f] enabled
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
PCI: 00:1f.2 [8086/1c01] enabled
PCI: 00:1f.3 [8086/1c22] enabled
PCI: 00:1f.5: Disabling device
PCI: 00:1f.5 [8086/1c09] disabled No operations
PCI: 00:1f.6 [8086/1c24] enabled
PCI: Leftover static devices:
PCI: 00:01.0
PCI: 00:16.1
PCI: 00:16.2
PCI: 00:16.3
PCI: 00:1c.7
PCI: Check your devicetree.cb.
PCI: pci_scan_bus for bus 01
scan_bus: scanning of bus PCI: 00:1c.0 took 57 usecs
PCI: pci_scan_bus for bus 02
scan_bus: scanning of bus PCI: 00:1c.1 took 56 usecs
PCI: pci_scan_bus for bus 03
PCI: 03:00.0 [1180/e822] enabled
Enabling Common Clock Configuration
ASPM: Enabled L0s and L1
Failed to enable LTR for dev = PCI: 03:00.0
scan_bus: scanning of bus PCI: 00:1c.3 took 242 usecs
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
PMH7: ID 04 Revision 01
PNP: 00ff.1 enabled
PNP: 0c31.0 enabled
EC Firmware ID 83HT30WW-3.20, Version 0.01C
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
No CMOS option 'low_battery_beep'.
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
H8: BDC installed
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
H8: WWAN detection not implemented. Assuming WWAN installed
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
PNP: 00ff.2 enabled
Hybrid graphics: Not installed
PNP: 00ff.f disabled
scan_bus: scanning of bus PCI: 00:1f.0 took 5538 usecs
bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled
bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled
scan_bus: scanning of bus PCI: 00:1f.3 took 30 usecs
scan_bus: scanning of bus DOMAIN: 0000 took 6455 usecs
scan_bus: scanning of bus Root Device took 6463 usecs
done
FMAP: area RW_MRC_CACHE found @ 700000 (65536 bytes)
MRC: Checking cached data update for 'RW_MRC_CACHE'.
Manufacturer: ef
SF: Detected W25Q64_V with sector size 0x1000, total 0x800000
MRC: no data in 'RW_MRC_CACHE'
MRC: cache data 'RW_MRC_CACHE' needs update.
BS: BS_DEV_ENUMERATE times (us): entry 0 run 6494 exit 5313
found VGA at PCI: 00:02.0
Setting up VGA for PCI: 00:02.0
Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000
Setting PCI_BRIDGE_CTL_VGA for bridge Root Device
Allocating resources...
Reading resources...
Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000.
PCI: 00:1a.0 EHCI BAR hook registered
More than one caller of pci_ehci_read_resources from PCI: 00:1d.0
PNP: 00ff.1 missing read_resources
PNP: 00ff.2 missing read_resources
Done reading resources.
skipping PNP: 00ff.2@60 fixed resource, size=0!
skipping PNP: 00ff.2@62 fixed resource, size=0!
skipping PNP: 00ff.2@64 fixed resource, size=0!
skipping PNP: 00ff.2@66 fixed resource, size=0!
Setting resources...
TOUUD 0x100600000 TOLUD 0x7da00000 TOM 0x80000000
MEBASE 0x7e000000
IGD decoded, subtracting 32M UMA and 2M GTT
TSEG base 0x7b000000 size 8M
Available memory below 4GB: 1968M
Available memory above 4GB: 6M
PCI: 00:02.0 10 <- [0x00e1000000 - 0x00e13fffff] size 0x00400000 gran 0x16 mem64
PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64
PCI: 00:02.0 20 <- [0x0000003000 - 0x000000303f] size 0x00000040 gran 0x06 io
PCI: 00:04.0 10 <- [0x00e1520000 - 0x00e1527fff] size 0x00008000 gran 0x0f mem64
PCI: 00:19.0 10 <- [0x00e1500000 - 0x00e151ffff] size 0x00020000 gran 0x11 mem
PCI: 00:19.0 14 <- [0x00e152c000 - 0x00e152cfff] size 0x00001000 gran 0x0c mem
PCI: 00:19.0 18 <- [0x0000003040 - 0x000000305f] size 0x00000020 gran 0x05 io
PCI: 00:1a.0 EHCI Debug Port hook triggered
PCI: 00:1a.0 10 <- [0x00e152f000 - 0x00e152f3ff] size 0x00000400 gran 0x0a mem
PCI: 00:1a.0 10 <- [0x00e152f000 - 0x00e152f3ff] size 0x00000400 gran 0x0a mem
PCI: 00:1a.0 EHCI Debug Port relocated
PCI: 00:1b.0 10 <- [0x00e1528000 - 0x00e152bfff] size 0x00004000 gran 0x0e mem64
PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io
PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem
PCI: 00:1c.0 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 mem
PCI: 00:1c.1 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 02 io
PCI: 00:1c.1 24 <- [0x00e0000000 - 0x00e07fffff] size 0x00800000 gran 0x14 bus 02 prefmem
PCI: 00:1c.1 20 <- [0x00e0800000 - 0x00e0ffffff] size 0x00800000 gran 0x14 bus 02 mem
NONE missing set_resources
PCI: 00:1c.3 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io
PCI: 00:1c.3 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem
PCI: 00:1c.3 20 <- [0x00e1400000 - 0x00e14fffff] size 0x00100000 gran 0x14 bus 03 mem
PCI: 03:00.0 10 <- [0x00e1400000 - 0x00e14000ff] size 0x00000100 gran 0x08 mem
PCI: 00:1d.0 10 <- [0x00e1530000 - 0x00e15303ff] size 0x00000400 gran 0x0a mem
PNP: 00ff.1 missing set_resources
PNP: 00ff.2 missing set_resources
PCI: 00:1f.2 10 <- [0x0000003080 - 0x0000003087] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 14 <- [0x0000003090 - 0x0000003093] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 18 <- [0x0000003088 - 0x000000308f] size 0x00000008 gran 0x03 io
PCI: 00:1f.2 1c <- [0x0000003094 - 0x0000003097] size 0x00000004 gran 0x02 io
PCI: 00:1f.2 20 <- [0x0000003060 - 0x000000307f] size 0x00000020 gran 0x05 io
PCI: 00:1f.2 24 <- [0x00e152e000 - 0x00e152e7ff] size 0x00000800 gran 0x0b mem
PCI: 00:1f.3 10 <- [0x00e1531000 - 0x00e15310ff] size 0x00000100 gran 0x08 mem64
PCI: 00:1f.6 10 <- [0x00e152d000 - 0x00e152dfff] size 0x00001000 gran 0x0c mem64
Done setting resources.
Done allocating resources.
BS: BS_DEV_RESOURCES times (us): entry 0 run 1264 exit 0
Enabling resources...
PCI: 00:00.0 subsystem <- 17aa/21ce
PCI: 00:00.0 cmd <- 06
PCI: 00:02.0 subsystem <- 17aa/21ce
PCI: 00:02.0 cmd <- 03
PCI: 00:04.0 cmd <- 02
PCI: 00:19.0 subsystem <- 17aa/21ce
PCI: 00:19.0 cmd <- 103
PCI: 00:1a.0 subsystem <- 17aa/21ce
PCI: 00:1a.0 cmd <- 106
PCI: 00:1b.0 subsystem <- 17aa/21ce
PCI: 00:1b.0 cmd <- 102
PCI: 00:1c.0 bridge ctrl <- 0003
PCI: 00:1c.0 subsystem <- 17aa/21ce
PCI: 00:1c.0 cmd <- 100
PCI: 00:1c.1 bridge ctrl <- 0003
PCI: 00:1c.1 subsystem <- 17aa/21ce
PCI: 00:1c.1 cmd <- 107
PCI: 00:1c.3 bridge ctrl <- 0003
PCI: 00:1c.3 subsystem <- 17aa/21ce
PCI: 00:1c.3 cmd <- 106
PCI: 00:1d.0 subsystem <- 17aa/21ce
PCI: 00:1d.0 cmd <- 102
pch_decode_init
PCI: 00:1f.0 subsystem <- 17aa/21ce
PCI: 00:1f.0 cmd <- 107
PCI: 00:1f.2 subsystem <- 17aa/21ce
PCI: 00:1f.2 cmd <- 03
PCI: 00:1f.3 subsystem <- 17aa/21ce
PCI: 00:1f.3 cmd <- 103
PCI: 00:1f.6 subsystem <- 17aa/21ce
PCI: 00:1f.6 cmd <- 02
PCI: 03:00.0 subsystem <- 17aa/21ce
PCI: 03:00.0 cmd <- 06
done.
BS: BS_DEV_ENABLE times (us): entry 0 run 158 exit 0
Found TPM ST33ZP24 by ST Microelectronics
TPM: Startup
TPM: command 0x99 returned 0x0
TPM: Asserting physical presence
TPM: command 0x4000000a returned 0x0
TPM: command 0x65 returned 0x0
TPM: flags disable=0, deactivated=0, nvlocked=1
TPM: setup succeeded
Initializing devices...
Root Device init ...
Root Device init finished in 1 usecs
CPU_CLUSTER: 0 init ...
MTRR: Physical address space:
0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6
0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0
0x00000000000c0000 - 0x000000007b000000 size 0x7af40000 type 6
0x000000007b000000 - 0x00000000d0000000 size 0x55000000 type 0
0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1
0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0
0x0000000100000000 - 0x0000000100600000 size 0x00600000 type 6
MTRR: Fixed MSR 0x250 0x0606060606060606
MTRR: Fixed MSR 0x258 0x0606060606060606
MTRR: Fixed MSR 0x259 0x0000000000000000
MTRR: Fixed MSR 0x268 0x0606060606060606
MTRR: Fixed MSR 0x269 0x0606060606060606
MTRR: Fixed MSR 0x26a 0x0606060606060606
MTRR: Fixed MSR 0x26b 0x0606060606060606
MTRR: Fixed MSR 0x26c 0x0606060606060606
MTRR: Fixed MSR 0x26d 0x0606060606060606
MTRR: Fixed MSR 0x26e 0x0606060606060606
MTRR: Fixed MSR 0x26f 0x0606060606060606
CPU physical address size: 36 bits
MTRR: default type WB/UC MTRR counts: 6/5.
MTRR: UC selected as default type.
MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6
MTRR: 1 base 0x000000007b000000 mask 0x0000000fff000000 type 0
MTRR: 2 base 0x000000007c000000 mask 0x0000000ffc000000 type 0
MTRR: 3 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1
MTRR: 4 base 0x0000000100000000 mask 0x0000000fff800000 type 6

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

CPU has 2 cores, 4 threads enabled.
Setting up SMI for CPU
Will perform SMM setup.
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'cpu_microcode_blob.bin'
CBFS: Found @ offset 15240 size 6400
microcode: sig=0x306a9 pf=0x10 revision=0x20
CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz.
Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170
Processing 16 relocs. Offset value of 0x00030000
Attempting to start 3 APs
Waiting for 10ms after sending INIT.
Waiting for 1st SIPI to complete...done.
Waiting for 2nd SIPI to complete...AP: slot 1 apic_id 1.
done.
AP: slot 2 apic_id 3.
AP: slot 3 apic_id 2.
Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8
Processing 13 relocs. Offset value of 0x00038000
SMM Module: stub loaded at 00038000. Will call 7af9d6d8(00000000)
Installing SMM handler to 0x7b000000
Loading module at 7b010000 with entry 7b010487. filesize: 0x1b90 memsize: 0x5bb8
Processing 72 relocs. Offset value of 0x7b010000
Loading module at 7b008000 with entry 7b008000. filesize: 0x1a8 memsize: 0x1a8
Processing 13 relocs. Offset value of 0x7b008000
SMM Module: placing jmp sequence at 7b007c00 rel16 0x03fd
SMM Module: placing jmp sequence at 7b007800 rel16 0x07fd
SMM Module: placing jmp sequence at 7b007400 rel16 0x0bfd
SMM Module: stub loaded at 7b008000. Will call 7b010487(00000000)
Initializing Southbridge SMI...

New SMBASE 0x7b000000
In relocation handler: cpu 0
New SMBASE=0x7b000000 IEDBASE=0x7b400000
Writing SMRR. base = 0x7b000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7afffc00
In relocation handler: cpu 1
New SMBASE=0x7afffc00 IEDBASE=0x7b400000
Writing SMRR. base = 0x7b000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7afff400
In relocation handler: cpu 3
New SMBASE=0x7afff400 IEDBASE=0x7b400000
Writing SMRR. base = 0x7b000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
New SMBASE 0x7afff800
In relocation handler: cpu 2
New SMBASE=0x7afff800 IEDBASE=0x7b400000
Writing SMRR. base = 0x7b000006, mask=0xff800800
Relocation complete.
microcode: Update skipped, already up-to-date
Initializing CPU #0
CPU: vendor Intel device 306a9
CPU: family 06, model 3a, stepping 09
Enabling cache
CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz.
CPU: platform id 4
CPU: cpuid(1) 0x306a9
CPU: AES supported
CPU: TXT supported
CPU: VT supported
Setting up local APIC...
 apic_id: 0x00 done.
IA32_FEATURE_CONTROL already locked; VMX status: enabled
IA32_FEATURE_CONTROL already locked
model_x06ax: energy policy set to 6
model_x06ax: frequency set to 2600
Turbo is available but hidden
Turbo has been enabled
CPU #0 initialized
Initializing CPU #1
Initializing CPU #3
Initializing CPU #2
CPU: vendor Intel device 306a9
CPU: vendor Intel device 306a9
CPU: family 06, model 3a, stepping 09
CPU: family 06, model 3a, stepping 09
Enabling cache
CPU: vendor Intel device 306a9
CPU: family 06, model 3a, stepping 09
Enabling cache
CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz.
Enabling cache
CPU: platform id 4
CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz.
CPU: cpuid(1) 0x306a9
CPU: platform id 4
CPU: AES supported
CPU: TXT supported
CPU: VT supported
CPU: cpuid(1) 0x306a9
Setting up local APIC...
CPU: AES supported
CPU: TXT supported
CPU: VT supported
 apic_id: 0x03 done.
Setting up local APIC...
IA32_FEATURE_CONTROL already locked; VMX status: enabled
 apic_id: 0x02 done.
IA32_FEATURE_CONTROL already locked
IA32_FEATURE_CONTROL already locked; VMX status: enabled
CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz.
IA32_FEATURE_CONTROL already locked
CPU: platform id 4
CPU: cpuid(1) 0x306a9
CPU: AES supported
CPU: TXT supported
CPU: VT supported
model_x06ax: energy policy set to 6
Setting up local APIC...
model_x06ax: frequency set to 2600
model_x06ax: energy policy set to 6
CPU #2 initialized
 apic_id: 0x01 done.
model_x06ax: frequency set to 2600
CPU #3 initialized
IA32_FEATURE_CONTROL already locked; VMX status: enabled
IA32_FEATURE_CONTROL already locked
model_x06ax: energy policy set to 6
model_x06ax: frequency set to 2600
CPU #1 initialized
bsp_do_flight_plan done after 19 msecs.
Initializing southbridge SMI...
SMI_STS: 
GPE0_STS: GPIO14 GPIO11 GPIO9 GPIO6 GPIO5 GPIO4 GPIO3 GPIO0 
ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI7 GPI6 GPI5 GPI4 GPI3 GPI1 GPI0 
TCO_STS: 
Locking SMM.
CPU_CLUSTER: 0 init finished in 32981 usecs
PCI: 00:00.0 init ...
Disabling PEG12.
Disabling PEG11.
Disabling PEG10.
Disabling PEG60.
Disabling Device 7.
Disabling PEG IO clock.
Set BIOS_RESET_CPL
CPU TDP: 35 Watts
PCI: 00:00.0 init finished in 1017 usecs
PCI: 00:02.0 init ...
GT Power Management Init
IVB GT2 25W-35W Power Meter Weights
GT Power Management Init (post VBIOS)

[0.133604] CONFIG =>
[0.133605]   (Primary   =>
[0.133606]      (Port => Internal,
[0.133607]       Framebuffer =>
[0.133607]         (Width     => 640,
[0.133609]          Height    => 400,
[0.133610]          Start_X   => 0,
[0.133611]          Start_Y   => 0,
[0.133612]          Stride    => 1,
[0.133613]          V_Stride  => 1,
[0.133614]          Tiling    => Linear ,
[0.133615]          Rotation  => No_Rotation,
[0.133616]          Offset => 0xffffffff,
[0.133617]          BPC    => 8),
[0.133618]       Mode =>
[0.133618]         (Dotclock           => 96000000,
[0.133620]          H_Visible          => 1600,
[0.133621]          H_Sync_Begin       => 1648,
[0.133622]          H_Sync_End         => 1680,
[0.133623]          H_Total            => 1728,
[0.133624]          V_Visible          => 900,
[0.133625]          V_Sync_Begin       => 903,
[0.133626]          V_Sync_End         => 908,
[0.133627]          V_Total            => 926,
[0.133628]          H_Sync_Active_High => False,
[0.133629]          V_Sync_Active_High => False,
[0.133630]          BPC                => 5)),
[0.133631]    Secondary =>
[0.133631]      (Port => Disabled,
[0.133633]       Framebuffer =>
[0.133633]         (Width     => 1,
[0.133635]          Height    => 1,
[0.133636]          Start_X   => 0,
[0.133637]          Start_Y   => 0,
[0.133638]          Stride    => 1,
[0.133639]          V_Stride  => 1,
[0.133640]          Tiling    => Linear ,
[0.133641]          Rotation  => No_Rotation,
[0.133642]          Offset => 0x00000000,
[0.133643]          BPC    => 8),
[0.133644]       Mode =>
[0.133644]         (Dotclock           => 19200000,
[0.133646]          H_Visible          => 1,
[0.133647]          H_Sync_Begin       => 1,
[0.133648]          H_Sync_End         => 1,
[0.133649]          H_Total            => 1,
[0.133650]          V_Visible          => 1,
[0.133651]          V_Sync_Begin       => 1,
[0.133652]          V_Sync_End         => 1,
[0.133653]          V_Total            => 1,
[0.133654]          H_Sync_Active_High => False,
[0.133655]          V_Sync_Active_High => False,
[0.133656]          BPC                => 5)),
[0.133657]    Tertiary  =>
[0.133657]      (Port => Disabled,
[0.133659]       Framebuffer =>
[0.133659]         (Width     => 1,
[0.133661]          Height    => 1,
[0.133662]          Start_X   => 0,
[0.133663]          Start_Y   => 0,
[0.133664]          Stride    => 1,
[0.133665]          V_Stride  => 1,
[0.133666]          Tiling    => Linear ,
[0.133667]          Rotation  => No_Rotation,
[0.133668]          Offset => 0x00000000,
[0.133669]          BPC    => 8),
[0.133670]       Mode =>
[0.133670]         (Dotclock           => 19200000,
[0.133672]          H_Visible          => 1,
[0.133673]          H_Sync_Begin       => 1,
[0.133674]          H_Sync_End         => 1,
[0.133675]          H_Total            => 1,
[0.133676]          V_Visible          => 1,
[0.133677]          V_Sync_Begin       => 1,
[0.133678]          V_Sync_End         => 1,
[0.133679]          V_Total            => 1,
[0.133680]          H_Sync_Active_High => False,
[0.133681]          V_Sync_Active_High => False,
[0.133682]          BPC                => 5)));
PCI: 00:02.0 init finished in 72040 usecs
PCI: 00:04.0 init ...
PCI: 00:04.0 init finished in 0 usecs
PCI: 00:19.0 init ...
PCI: 00:19.0 init finished in 0 usecs
PCI: 00:1a.0 init ...
EHCI: Setting up controller.. done.
PCI: 00:1a.0 init finished in 13 usecs
PCI: 00:1b.0 init ...
Azalia: base = e1528000
Azalia: codec_mask = 09
Azalia: Initializing codec #3
Azalia: codec viddid: 80862805
Azalia: No verb!
Azalia: Initializing codec #0
Azalia: codec viddid: 14f1506e
Azalia: verb_size: 52
Azalia: verb loaded.
PCI: 00:1b.0 init finished in 4309 usecs
PCI: 00:1c.0 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.0 init finished in 10 usecs
PCI: 00:1c.1 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.1 init finished in 13 usecs
PCI: 00:1c.3 init ...
Initializing PCH PCIe bridge.
PCI: 00:1c.3 init finished in 10 usecs
PCI: 00:1d.0 init ...
EHCI: Setting up controller.. done.
PCI: 00:1d.0 init finished in 13 usecs
PCI: 00:1f.0 init ...
pch: lpc_init
PCH: detected QM67, device id: 0x1c4f, rev id 0x5
IOAPIC: Initializing IOAPIC at 0xfec00000
IOAPIC: Bootstrap Processor Local APIC = 0x00
IOAPIC: ID = 0x02
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
Set power off after power failure.
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
NMI sources enabled.
CougarPoint PM init
RTC: failed = 0x0
RTC Init
Disabling ACPI via APMC:
done.
pch_spi_init
PCI: 00:1f.0 init finished in 929 usecs
PCI: 00:1f.2 init ...
SATA: Initializing...
FMAP: area COREBOOT found @ 710200 (982528 bytes)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
SATA: Controller in AHCI mode.
ABAR: e152e000
PCI: 00:1f.2 init finished in 360 usecs
PCI: 00:1f.3 init ...
PCI: 00:1f.3 init finished in 7 usecs
PCI: 00:1f.6 init ...
PCI: 00:1f.6 init finished in 0 usecs
PCI: 03:00.0 init ...
PCI: 03:00.0 init finished in 14 usecs
PNP: 00ff.2 init ...
PNP: 00ff.2 init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:54 init ...
I2C: 01:54 init finished in 2 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:55 init ...
I2C: 01:55 init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:56 init ...
I2C: 01:56 init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:57 init ...
I2C: 01:57 init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5c init ...
Locking EEPROM RFID
init EEPROM done
I2C: 01:5c init finished in 25888 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5d init ...
I2C: 01:5d init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5e init ...
I2C: 01:5e init finished in 1 usecs
smbus: PCI: 00:1f.3[0]->I2C: 01:5f init ...
I2C: 01:5f init finished in 1 usecs
Devices initialized
BS: BS_DEV_INIT times (us): entry 14918 run 137739 exit 0
Finalize devices...
PCI: 00:1f.0 final
Devices finalized
BS: BS_POST_DEVICE times (us): entry 0 run 49 exit 0
BS: BS_OS_RESUME_CHECK times (us): entry 0 run 2 exit 0
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'fallback/dsdt.aml'
CBFS: Found @ offset 44280 size 388f
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'fallback/slic'
CBFS: 'fallback/slic' not found.
ACPI: Writing ACPI tables at 7af40000.
ACPI:    * FACS
ACPI:    * DSDT
ACPI:    * FADT
ACPI: added table 1/32, length now 40
ACPI:     * SSDT
Found 1 CPU(s) with 4 core(s) each.
PSS: 2601MHz power 35000 control 0x2100 status 0x2100
PSS: 2600MHz power 35000 control 0x1a00 status 0x1a00
PSS: 2400MHz power 31561 control 0x1800 status 0x1800
PSS: 2200MHz power 28247 control 0x1600 status 0x1600
PSS: 2000MHz power 25084 control 0x1400 status 0x1400
PSS: 1800MHz power 22064 control 0x1200 status 0x1200
PSS: 1600MHz power 19135 control 0x1000 status 0x1000
PSS: 1400MHz power 16344 control 0xe00 status 0xe00
PSS: 1200MHz power 13666 control 0xc00 status 0xc00
PSS: 2601MHz power 35000 control 0x2100 status 0x2100
PSS: 2600MHz power 35000 control 0x1a00 status 0x1a00
PSS: 2400MHz power 31561 control 0x1800 status 0x1800
PSS: 2200MHz power 28247 control 0x1600 status 0x1600
PSS: 2000MHz power 25084 control 0x1400 status 0x1400
PSS: 1800MHz power 22064 control 0x1200 status 0x1200
PSS: 1600MHz power 19135 control 0x1000 status 0x1000
PSS: 1400MHz power 16344 control 0xe00 status 0xe00
PSS: 1200MHz power 13666 control 0xc00 status 0xc00
PSS: 2601MHz power 35000 control 0x2100 status 0x2100
PSS: 2600MHz power 35000 control 0x1a00 status 0x1a00
PSS: 2400MHz power 31561 control 0x1800 status 0x1800
PSS: 2200MHz power 28247 control 0x1600 status 0x1600
PSS: 2000MHz power 25084 control 0x1400 status 0x1400
PSS: 1800MHz power 22064 control 0x1200 status 0x1200
PSS: 1600MHz power 19135 control 0x1000 status 0x1000
PSS: 1400MHz power 16344 control 0xe00 status 0xe00
PSS: 1200MHz power 13666 control 0xc00 status 0xc00
PSS: 2601MHz power 35000 control 0x2100 status 0x2100
PSS: 2600MHz power 35000 control 0x1a00 status 0x1a00
PSS: 2400MHz power 31561 control 0x1800 status 0x1800
PSS: 2200MHz power 28247 control 0x1600 status 0x1600
PSS: 2000MHz power 25084 control 0x1400 status 0x1400
PSS: 1800MHz power 22064 control 0x1200 status 0x1200
PSS: 1600MHz power 19135 control 0x1000 status 0x1000
PSS: 1400MHz power 16344 control 0xe00 status 0xe00
PSS: 1200MHz power 13666 control 0xc00 status 0xc00
Generating ACPI PIRQ entries
\_SB.PCI0.LPCB.TPM: LPC TPM PNP: 0c31.0
ACPI:    * H8
H8: BDC installed
H8: WWAN detection not implemented. Assuming WWAN installed
ACPI: added table 2/32, length now 44
ACPI:    * MCFG
ACPI: added table 3/32, length now 48
ACPI:    * TCPA
TCPA log created at 7af2f000
ACPI: added table 4/32, length now 52
ACPI:    * MADT
ACPI: added table 5/32, length now 56
current = 7af45900
ACPI:     * DMAR
ACPI: added table 6/32, length now 60
current = 7af459d0
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'vbt.bin'
CBFS: Found @ offset 3eb00 size 558
Found a VBT of 3985 bytes after decompression
GMA: Found VBT in CBFS
GMA: Found valid VBT in CBFS
ACPI:    * HPET
ACPI: added table 7/32, length now 64
ACPI: done.
ACPI tables: 31248 bytes.
smbios_write_tables: 7af2e000
Create SMBIOS type 17
SMBIOS tables: 788 bytes.
Writing table forward entry at 0x00000500
Wrote coreboot table at: 00000500, 0x10 bytes, checksum 44e8
Writing coreboot table at 0x7af64000
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'cmos_layout.bin'
CBFS: Found @ offset 3f0c0 size 7c8
 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES
 1. 0000000000001000-000000000009ffff: RAM
 2. 00000000000a0000-00000000000fffff: RESERVED
 3. 0000000000100000-000000007af2dfff: RAM
 4. 000000007af2e000-000000007af7cfff: CONFIGURATION TABLES
 5. 000000007af7d000-000000007afccfff: RAMSTAGE
 6. 000000007afcd000-000000007affffff: CONFIGURATION TABLES
 7. 000000007b000000-000000007d9fffff: RESERVED
 8. 00000000f0000000-00000000f3ffffff: RESERVED
 9. 00000000fed40000-00000000fed44fff: RESERVED
10. 00000000fed90000-00000000fed91fff: RESERVED
11. 0000000100000000-00000001005fffff: RAM
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
Wrote coreboot table at: 7af64000, 0xb58 bytes, checksum ae8b
coreboot table: 2928 bytes.
IMD ROOT    0. 7afff000 00001000
IMD SMALL   1. 7affe000 00001000
CONSOLE     2. 7afde000 00020000
TIME STAMP  3. 7afdd000 00000910
MRC DATA    4. 7afdc000 000005d4
ROMSTG STCK 5. 7afd7000 00005000
AFTER CAR   6. 7afcd000 0000a000
RAMSTAGE    7. 7af7c000 00051000
SMM BACKUP  8. 7af6c000 00010000
COREBOOT    9. 7af64000 00008000
ACPI       10. 7af40000 00024000
ACPI GNVS  11. 7af3f000 00001000
TCPA TCGLOG12. 7af2f000 00010000
SMBIOS     13. 7af2e000 00000800
IMD small region:
  IMD ROOT    0. 7affec00 00000400
  USBDEBUG    1. 7affeba0 00000050
  MEM INFO    2. 7affe9e0 000001a9
  ROMSTAGE    3. 7affe9c0 00000004
  COREBOOTFWD 4. 7affe980 00000028
BS: BS_WRITE_TABLES times (us): entry 0 run 25937 exit 0
CBFS: 'Master Header Locator' located CBFS at [710200:800000)
CBFS: Locating 'fallback/payload'
CBFS: Found @ offset 47b80 size 109e9
Checking segment from ROM address 0xfff57db8
Payload being loaded at below 1MiB without region being marked as RAM usable.
Checking segment from ROM address 0xfff57dd4
Loading segment from ROM address 0xfff57db8
  code (compression=1)
  New segment dstaddr 0x000e0620 memsize 0x1f9e0 srcaddr 0xfff57df0 filesize 0x109b1
Loading Segment: addr: 0x000e0620 memsz: 0x000000000001f9e0 filesz: 0x00000000000109b1
using LZMA
Loading segment from ROM address 0xfff57dd4
  Entry Point 0x000fec22
BS: BS_PAYLOAD_LOAD times (us): entry 0 run 28594 exit 0
ICH-NM10-PCH: watchdog disabled
Jumping to boot code at 000fec22(7af64000)
SeaBIOS (version rel-1.12.1-0-ga5cab58)
BUILD: gcc: (coreboot toolchain v1.50 October 15th, 2017) 6.3.0 binutils: (GNU Binutils) 2.29.1
Found coreboot cbmem console @ 7afde000
Found mainboard LENOVO ThinkPad T420
Relocating init from 0x000e1c80 to 0x7aee11a0 (size 52672)
Found CBFS header at 0xfff10238
multiboot: eax=7afb6d80, ebx=7afb6d34
Found 15 PCI devices (max PCI bus is 03)
Copying SMBIOS entry point from 0x7af2e000 to 0x000f6620
Copying ACPI RSDP from 0x7af40000 to 0x000f65f0
Using pmtimer, ioport 0x508
Scan for VGA option rom
Running option rom at c000:0003
pmm call arg1=0
Turning on vga text mode console
SeaBIOS (version rel-1.12.1-0-ga5cab58)
Machine UUID 7293a901-521d-11cb-a5cc-83382c69bc4d
EHCI init on dev 00:1a.0 (regs=0xe152f020)
EHCI init on dev 00:1d.0 (regs=0xe1530020)
AHCI controller at 00:1f.2, iobase 0xe152e000, irq 10
Searching bootorder for: /pci@i0cf8/pci-bridge@1c,3/*@0
Found 0 lpt ports
Found 0 serial ports
Searching bootorder for: /pci@i0cf8/*@1f,2/drive@1/disk@0
AHCI/1: registering: "DVD/CD [AHCI/1: HL-DT-STDVDRAM GT33N ATAPI-7 DVD/CD]"
Searching bootorder for: /pci@i0cf8/usb@1a/hub@1/storage@1/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@1a/hub@1/usb-*@1
USB MSC vendor='PLEXTOR' product='PX-128M6Pro' rev='' type=0 removable=0
USB MSC blksize=512 sectors=250069680
Initialized USB HUB (1 ports used)
Initialized USB HUB (0 ports used)
PS2 keyboard initialized
All threads complete.
Scan for option roms

Press ESC for boot menu.

Select boot device:

1. DVD/CD [AHCI/1: HL-DT-STDVDRAM GT33N ATAPI-7 DVD/CD]
2. USB MSC Drive PLEXTOR PX-128M6Pro 

t. TPM Configuration

Searching bootorder for: HALT
drive 0x000f6550: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=250069680
Space available for UMB: c7000-ed000, f5e40-f6520
Returned 253952 bytes of ZoneHigh
e820 map has 9 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 000000007af2c000 = 1 RAM
  4: 000000007af2c000 - 000000007da00000 = 2 RESERVED
  5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED
  6: 00000000fed40000 - 00000000fed45000 = 2 RESERVED
  7: 00000000fed90000 - 00000000fed92000 = 2 RESERVED
  8: 0000000100000000 - 0000000100600000 = 1 RAM
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00