| Sorry, try again. |
| *** Pre-CBMEM romstage console overflowed, log truncated! *** |
| 0T |
| Selected tWR : 8T |
| Selected tFAW : 20T |
| Selected tRRD : 4T |
| Selected tRTP : 4T |
| Selected tWTR : 4T |
| Selected tRFC : 59T |
| Done dimm mapping |
| Update PCI-E configuration space: |
| PCI(0, 0, 0)[a0] = 80000000 |
| PCI(0, 0, 0)[a4] = 0 |
| PCI(0, 0, 0)[bc] = 7da00000 |
| PCI(0, 0, 0)[a8] = 600000 |
| PCI(0, 0, 0)[ac] = 1 |
| PCI(0, 0, 0)[b8] = 7b000000 |
| PCI(0, 0, 0)[b0] = 7ba00000 |
| PCI(0, 0, 0)[b4] = 7b800000 |
| PCI(0, 0, 0)[7c] = 7f |
| PCI(0, 0, 0)[70] = 7e000000 |
| PCI(0, 0, 0)[74] = 0 |
| PCI(0, 0, 0)[78] = fe000c00 |
| Done memory map |
| Done io registers |
| Done jedec reset |
| Done MRS commands |
| t123: 2128, 6000, 7620 |
| ME: FW Partition Table : OK |
| ME: Bringup Loader Failure : NO |
| ME: Firmware Init Complete : NO |
| ME: Manufacturing Mode : NO |
| ME: Boot Options Present : NO |
| ME: Update In Progress : NO |
| ME: Current Working State : Recovery |
| ME: Current Operation State : Bring up |
| ME: Current Operation Mode : Normal |
| ME: Error Code : No Error |
| ME: Progress Phase : BUP Phase |
| ME: Power Management Event : Pseudo-global reset |
| ME: Progress Phase State : 0x4e |
| ME: FWS2: 0x164e0002 |
| ME: Bist in progress: 0x0 |
| ME: ICC Status : 0x1 |
| ME: Invoke MEBx : 0x0 |
| ME: CPU replaced : 0x0 |
| ME: MBP ready : 0x0 |
| ME: MFS failure : 0x0 |
| ME: Warm reset req : 0x0 |
| ME: CPU repl valid : 0x0 |
| ME: (Reserved) : 0x0 |
| ME: FW update req : 0x0 |
| ME: (Reserved) : 0x0 |
| ME: Current state : 0x4e |
| ME: Current PM event: 0x6 |
| ME: Progress code : 0x1 |
| Waited long enough, or CPU was not replaced, continue... |
| PASSED! Tell ME that DRAM is ready |
| ME: FWS2: 0x162c0002 |
| ME: Bist in progress: 0x0 |
| ME: ICC Status : 0x1 |
| ME: Invoke MEBx : 0x0 |
| ME: CPU replaced : 0x0 |
| ME: MBP ready : 0x0 |
| ME: MFS failure : 0x0 |
| ME: Warm reset req : 0x0 |
| ME: CPU repl valid : 0x0 |
| ME: (Reserved) : 0x0 |
| ME: FW update req : 0x0 |
| ME: (Reserved) : 0x0 |
| ME: Current state : 0x2c |
| ME: Current PM event: 0x6 |
| ME: Progress code : 0x1 |
| ME: Requested BIOS Action: Continue to boot |
| ME: FW Partition Table : OK |
| ME: Bringup Loader Failure : NO |
| ME: Firmware Init Complete : NO |
| ME: Manufacturing Mode : NO |
| ME: Boot Options Present : NO |
| ME: Update In Progress : NO |
| ME: Current Working State : Recovery |
| ME: Current Operation State : Bring up |
| ME: Current Operation Mode : Normal |
| ME: Error Code : No Error |
| ME: Progress Phase : BUP Phase |
| ME: Power Management Event : Pseudo-global reset |
| ME: Progress Phase State : 0x2c |
| memcfg DDR3 ref clock 133 MHz |
| memcfg DDR3 clock 1064 MHz |
| memcfg channel assignment: A: 1, B 0, C 2 |
| memcfg channel[0] config (00000000): |
| ECC inactive |
| enhanced interleave mode off |
| rank interleave off |
| DIMMA 0 MB width x8 single rank, selected |
| DIMMB 0 MB width x8 single rank |
| memcfg channel[1] config (00620008): |
| ECC inactive |
| enhanced interleave mode on |
| rank interleave on |
| DIMMA 2048 MB width x8 dual rank, selected |
| DIMMB 0 MB width x8 single rank |
| CBMEM: |
| IMD: root @ 7afff000 254 entries. |
| IMD: root @ 7affec00 62 entries. |
| External stage cache: |
| IMD: root @ 7b3ff000 254 entries. |
| IMD: root @ 7b3fec00 62 entries. |
| CBMEM entry for DIMM info: 0x7affe9e0 |
| MTRR Range: Start=ff800000 End=0 (Size 800000) |
| MTRR Range: Start=0 End=1000000 (Size 1000000) |
| MTRR Range: Start=7a800000 End=7b000000 (Size 800000) |
| MTRR Range: Start=7b000000 End=7b800000 (Size 800000) |
| CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| CBFS: Locating 'fallback/postcar' |
| CBFS: Found @ offset 3f8c0 size 4974 |
| Decompressing stage fallback/postcar @ 0x7afcdfc0 (35608 bytes) |
| Loading module at 7afce000 with entry 7afce000. filesize: 0x46d0 memsize: 0x8ad8 |
| Processing 146 relocs. Offset value of 0x78fce000 |
| |
| |
| coreboot-4.9-1860-g2761847-dirty Sun Jun 2 04:11:29 UTC 2019 postcar starting (log level: 7)... |
| usbdebug: Failed hardware init |
| CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| CBFS: Locating 'fallback/ramstage' |
| CBFS: Found @ offset 1b6c0 size 1c1f0 |
| Decompressing stage fallback/ramstage @ 0x7af7cfc0 (327160 bytes) |
| Loading module at 7af7d000 with entry 7af7d000. filesize: 0x3a750 memsize: 0x4fdb8 |
| Processing 4031 relocs. Offset value of 0x7a17d000 |
| |
| |
| coreboot-4.9-1860-g2761847-dirty Sun Jun 2 04:11:29 UTC 2019 ramstage starting (log level: 7)... |
| usbdebug: Failed hardware init |
| Normal boot. |
| BS: BS_PRE_DEVICE times (us): entry 0 run 2 exit 0 |
| BS: BS_DEV_INIT_CHIPS times (us): entry 0 run 3 exit 0 |
| Enumerating buses... |
| CPU_CLUSTER: 0 enabled |
| DOMAIN: 0000 enabled |
| PCI: pci_scan_bus for bus 00 |
| PCI: 00:00.0 [8086/0154] enabled |
| PCI: Static device PCI: 00:01.0 not found, disabling it. |
| PCI: 00:02.0 [8086/0166] enabled |
| PCI: 00:04.0 [8086/0153] enabled |
| PCI: 00:16.0: Disabling device |
| PCI: 00:16.0 [8086/1c3a] disabled |
| PCI: 00:16.1: Disabling device |
| PCI: 00:16.2: Disabling device |
| PCI: 00:16.3: Disabling device |
| PCI: 00:19.0 [8086/1502] enabled |
| PCI: 00:1a.0 [8086/1c2d] enabled |
| PCI: 00:1b.0 [8086/1c20] enabled |
| PCH: PCIe Root Port coalescing is enabled |
| PCI: 00:1c.0: Disabling device |
| PCI: 00:1c.0: check set enabled |
| PCI: 00:1c.0 [8086/1c10] disabled |
| PCH: Remap PCIe function 1 to 0 |
| PCI: 00:1c.1 [8086/1c12] enabled |
| PCI: 00:1c.2: Disabling device |
| PCI: 00:1c.2 [8086/1c14] disabled |
| PCH: Remap PCIe function 3 to 0 |
| PCI: 00:1c.3 [8086/1c16] enabled |
| PCH: Remap PCIe function 4 to 0 |
| PCI: 00:1c.4 [8086/1c18] enabled |
| PCI: 00:1c.5: Disabling device |
| PCI: 00:1c.5 [8086/1c1a] disabled |
| PCI: 00:1c.6: Disabling device |
| PCI: 00:1c.6 [8086/1c1c] disabled |
| PCI: 00:1c.7: Disabling device |
| PCH: PCIe map 1c.0 -> 1c.4 |
| PCH: PCIe map 1c.1 -> 1c.0 |
| PCH: PCIe map 1c.3 -> 1c.1 |
| PCH: PCIe map 1c.4 -> 1c.3 |
| PCI: 00:1d.0 [8086/1c26] enabled |
| PCI: 00:1e.0: Disabling device |
| PCI: 00:1e.0 [8086/2448] disabled |
| PCI: 00:1f.0 [8086/1c4f] enabled |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| PCI: 00:1f.2 [8086/1c01] enabled |
| PCI: 00:1f.3 [8086/1c22] enabled |
| PCI: 00:1f.5: Disabling device |
| PCI: 00:1f.5 [8086/1c09] disabled No operations |
| PCI: 00:1f.6 [8086/1c24] enabled |
| PCI: Leftover static devices: |
| PCI: 00:01.0 |
| PCI: 00:16.1 |
| PCI: 00:16.2 |
| PCI: 00:16.3 |
| PCI: 00:1c.7 |
| PCI: Check your devicetree.cb. |
| PCI: pci_scan_bus for bus 01 |
| scan_bus: scanning of bus PCI: 00:1c.0 took 57 usecs |
| PCI: pci_scan_bus for bus 02 |
| scan_bus: scanning of bus PCI: 00:1c.1 took 56 usecs |
| PCI: pci_scan_bus for bus 03 |
| PCI: 03:00.0 [1180/e822] enabled |
| Enabling Common Clock Configuration |
| ASPM: Enabled L0s and L1 |
| Failed to enable LTR for dev = PCI: 03:00.0 |
| scan_bus: scanning of bus PCI: 00:1c.3 took 242 usecs |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| PMH7: ID 04 Revision 01 |
| PNP: 00ff.1 enabled |
| PNP: 0c31.0 enabled |
| EC Firmware ID 83HT30WW-3.20, Version 0.01C |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| No CMOS option 'low_battery_beep'. |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| H8: BDC installed |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| H8: WWAN detection not implemented. Assuming WWAN installed |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| PNP: 00ff.2 enabled |
| Hybrid graphics: Not installed |
| PNP: 00ff.f disabled |
| scan_bus: scanning of bus PCI: 00:1f.0 took 5538 usecs |
| bus: PCI: 00:1f.3[0]->I2C: 01:54 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:55 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:56 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:57 enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5c enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5d enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5e enabled |
| bus: PCI: 00:1f.3[0]->I2C: 01:5f enabled |
| scan_bus: scanning of bus PCI: 00:1f.3 took 30 usecs |
| scan_bus: scanning of bus DOMAIN: 0000 took 6455 usecs |
| scan_bus: scanning of bus Root Device took 6463 usecs |
| done |
| FMAP: area RW_MRC_CACHE found @ 700000 (65536 bytes) |
| MRC: Checking cached data update for 'RW_MRC_CACHE'. |
| Manufacturer: ef |
| SF: Detected W25Q64_V with sector size 0x1000, total 0x800000 |
| MRC: no data in 'RW_MRC_CACHE' |
| MRC: cache data 'RW_MRC_CACHE' needs update. |
| BS: BS_DEV_ENUMERATE times (us): entry 0 run 6494 exit 5313 |
| found VGA at PCI: 00:02.0 |
| Setting up VGA for PCI: 00:02.0 |
| Setting PCI_BRIDGE_CTL_VGA for bridge DOMAIN: 0000 |
| Setting PCI_BRIDGE_CTL_VGA for bridge Root Device |
| Allocating resources... |
| Reading resources... |
| Adding PCIe enhanced config space BAR 0xf0000000-0xf4000000. |
| PCI: 00:1a.0 EHCI BAR hook registered |
| More than one caller of pci_ehci_read_resources from PCI: 00:1d.0 |
| PNP: 00ff.1 missing read_resources |
| PNP: 00ff.2 missing read_resources |
| Done reading resources. |
| skipping PNP: 00ff.2@60 fixed resource, size=0! |
| skipping PNP: 00ff.2@62 fixed resource, size=0! |
| skipping PNP: 00ff.2@64 fixed resource, size=0! |
| skipping PNP: 00ff.2@66 fixed resource, size=0! |
| Setting resources... |
| TOUUD 0x100600000 TOLUD 0x7da00000 TOM 0x80000000 |
| MEBASE 0x7e000000 |
| IGD decoded, subtracting 32M UMA and 2M GTT |
| TSEG base 0x7b000000 size 8M |
| Available memory below 4GB: 1968M |
| Available memory above 4GB: 6M |
| PCI: 00:02.0 10 <- [0x00e1000000 - 0x00e13fffff] size 0x00400000 gran 0x16 mem64 |
| PCI: 00:02.0 18 <- [0x00d0000000 - 0x00dfffffff] size 0x10000000 gran 0x1c prefmem64 |
| PCI: 00:02.0 20 <- [0x0000003000 - 0x000000303f] size 0x00000040 gran 0x06 io |
| PCI: 00:04.0 10 <- [0x00e1520000 - 0x00e1527fff] size 0x00008000 gran 0x0f mem64 |
| PCI: 00:19.0 10 <- [0x00e1500000 - 0x00e151ffff] size 0x00020000 gran 0x11 mem |
| PCI: 00:19.0 14 <- [0x00e152c000 - 0x00e152cfff] size 0x00001000 gran 0x0c mem |
| PCI: 00:19.0 18 <- [0x0000003040 - 0x000000305f] size 0x00000020 gran 0x05 io |
| PCI: 00:1a.0 EHCI Debug Port hook triggered |
| PCI: 00:1a.0 10 <- [0x00e152f000 - 0x00e152f3ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1a.0 10 <- [0x00e152f000 - 0x00e152f3ff] size 0x00000400 gran 0x0a mem |
| PCI: 00:1a.0 EHCI Debug Port relocated |
| PCI: 00:1b.0 10 <- [0x00e1528000 - 0x00e152bfff] size 0x00004000 gran 0x0e mem64 |
| PCI: 00:1c.0 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 01 io |
| PCI: 00:1c.0 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 prefmem |
| PCI: 00:1c.0 20 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 01 mem |
| PCI: 00:1c.1 1c <- [0x0000002000 - 0x0000002fff] size 0x00001000 gran 0x0c bus 02 io |
| PCI: 00:1c.1 24 <- [0x00e0000000 - 0x00e07fffff] size 0x00800000 gran 0x14 bus 02 prefmem |
| PCI: 00:1c.1 20 <- [0x00e0800000 - 0x00e0ffffff] size 0x00800000 gran 0x14 bus 02 mem |
| NONE missing set_resources |
| PCI: 00:1c.3 1c <- [0x000000ffff - 0x000000fffe] size 0x00000000 gran 0x0c bus 03 io |
| PCI: 00:1c.3 24 <- [0x00efffffff - 0x00effffffe] size 0x00000000 gran 0x14 bus 03 prefmem |
| PCI: 00:1c.3 20 <- [0x00e1400000 - 0x00e14fffff] size 0x00100000 gran 0x14 bus 03 mem |
| PCI: 03:00.0 10 <- [0x00e1400000 - 0x00e14000ff] size 0x00000100 gran 0x08 mem |
| PCI: 00:1d.0 10 <- [0x00e1530000 - 0x00e15303ff] size 0x00000400 gran 0x0a mem |
| PNP: 00ff.1 missing set_resources |
| PNP: 00ff.2 missing set_resources |
| PCI: 00:1f.2 10 <- [0x0000003080 - 0x0000003087] size 0x00000008 gran 0x03 io |
| PCI: 00:1f.2 14 <- [0x0000003090 - 0x0000003093] size 0x00000004 gran 0x02 io |
| PCI: 00:1f.2 18 <- [0x0000003088 - 0x000000308f] size 0x00000008 gran 0x03 io |
| PCI: 00:1f.2 1c <- [0x0000003094 - 0x0000003097] size 0x00000004 gran 0x02 io |
| PCI: 00:1f.2 20 <- [0x0000003060 - 0x000000307f] size 0x00000020 gran 0x05 io |
| PCI: 00:1f.2 24 <- [0x00e152e000 - 0x00e152e7ff] size 0x00000800 gran 0x0b mem |
| PCI: 00:1f.3 10 <- [0x00e1531000 - 0x00e15310ff] size 0x00000100 gran 0x08 mem64 |
| PCI: 00:1f.6 10 <- [0x00e152d000 - 0x00e152dfff] size 0x00001000 gran 0x0c mem64 |
| Done setting resources. |
| Done allocating resources. |
| BS: BS_DEV_RESOURCES times (us): entry 0 run 1264 exit 0 |
| Enabling resources... |
| PCI: 00:00.0 subsystem <- 17aa/21ce |
| PCI: 00:00.0 cmd <- 06 |
| PCI: 00:02.0 subsystem <- 17aa/21ce |
| PCI: 00:02.0 cmd <- 03 |
| PCI: 00:04.0 cmd <- 02 |
| PCI: 00:19.0 subsystem <- 17aa/21ce |
| PCI: 00:19.0 cmd <- 103 |
| PCI: 00:1a.0 subsystem <- 17aa/21ce |
| PCI: 00:1a.0 cmd <- 106 |
| PCI: 00:1b.0 subsystem <- 17aa/21ce |
| PCI: 00:1b.0 cmd <- 102 |
| PCI: 00:1c.0 bridge ctrl <- 0003 |
| PCI: 00:1c.0 subsystem <- 17aa/21ce |
| PCI: 00:1c.0 cmd <- 100 |
| PCI: 00:1c.1 bridge ctrl <- 0003 |
| PCI: 00:1c.1 subsystem <- 17aa/21ce |
| PCI: 00:1c.1 cmd <- 107 |
| PCI: 00:1c.3 bridge ctrl <- 0003 |
| PCI: 00:1c.3 subsystem <- 17aa/21ce |
| PCI: 00:1c.3 cmd <- 106 |
| PCI: 00:1d.0 subsystem <- 17aa/21ce |
| PCI: 00:1d.0 cmd <- 102 |
| pch_decode_init |
| PCI: 00:1f.0 subsystem <- 17aa/21ce |
| PCI: 00:1f.0 cmd <- 107 |
| PCI: 00:1f.2 subsystem <- 17aa/21ce |
| PCI: 00:1f.2 cmd <- 03 |
| PCI: 00:1f.3 subsystem <- 17aa/21ce |
| PCI: 00:1f.3 cmd <- 103 |
| PCI: 00:1f.6 subsystem <- 17aa/21ce |
| PCI: 00:1f.6 cmd <- 02 |
| PCI: 03:00.0 subsystem <- 17aa/21ce |
| PCI: 03:00.0 cmd <- 06 |
| done. |
| BS: BS_DEV_ENABLE times (us): entry 0 run 158 exit 0 |
| Found TPM ST33ZP24 by ST Microelectronics |
| TPM: Startup |
| TPM: command 0x99 returned 0x0 |
| TPM: Asserting physical presence |
| TPM: command 0x4000000a returned 0x0 |
| TPM: command 0x65 returned 0x0 |
| TPM: flags disable=0, deactivated=0, nvlocked=1 |
| TPM: setup succeeded |
| Initializing devices... |
| Root Device init ... |
| Root Device init finished in 1 usecs |
| CPU_CLUSTER: 0 init ... |
| MTRR: Physical address space: |
| 0x0000000000000000 - 0x00000000000a0000 size 0x000a0000 type 6 |
| 0x00000000000a0000 - 0x00000000000c0000 size 0x00020000 type 0 |
| 0x00000000000c0000 - 0x000000007b000000 size 0x7af40000 type 6 |
| 0x000000007b000000 - 0x00000000d0000000 size 0x55000000 type 0 |
| 0x00000000d0000000 - 0x00000000e0000000 size 0x10000000 type 1 |
| 0x00000000e0000000 - 0x0000000100000000 size 0x20000000 type 0 |
| 0x0000000100000000 - 0x0000000100600000 size 0x00600000 type 6 |
| MTRR: Fixed MSR 0x250 0x0606060606060606 |
| MTRR: Fixed MSR 0x258 0x0606060606060606 |
| MTRR: Fixed MSR 0x259 0x0000000000000000 |
| MTRR: Fixed MSR 0x268 0x0606060606060606 |
| MTRR: Fixed MSR 0x269 0x0606060606060606 |
| MTRR: Fixed MSR 0x26a 0x0606060606060606 |
| MTRR: Fixed MSR 0x26b 0x0606060606060606 |
| MTRR: Fixed MSR 0x26c 0x0606060606060606 |
| MTRR: Fixed MSR 0x26d 0x0606060606060606 |
| MTRR: Fixed MSR 0x26e 0x0606060606060606 |
| MTRR: Fixed MSR 0x26f 0x0606060606060606 |
| CPU physical address size: 36 bits |
| MTRR: default type WB/UC MTRR counts: 6/5. |
| MTRR: UC selected as default type. |
| MTRR: 0 base 0x0000000000000000 mask 0x0000000f80000000 type 6 |
| MTRR: 1 base 0x000000007b000000 mask 0x0000000fff000000 type 0 |
| MTRR: 2 base 0x000000007c000000 mask 0x0000000ffc000000 type 0 |
| MTRR: 3 base 0x00000000d0000000 mask 0x0000000ff0000000 type 1 |
| MTRR: 4 base 0x0000000100000000 mask 0x0000000fff800000 type 6 |
| |
| MTRR check |
| Fixed MTRRs : Enabled |
| Variable MTRRs: Enabled |
| |
| CPU has 2 cores, 4 threads enabled. |
| Setting up SMI for CPU |
| Will perform SMM setup. |
| CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| CBFS: Locating 'cpu_microcode_blob.bin' |
| CBFS: Found @ offset 15240 size 6400 |
| microcode: sig=0x306a9 pf=0x10 revision=0x20 |
| CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz. |
| Loading module at 00030000 with entry 00030000. filesize: 0x170 memsize: 0x170 |
| Processing 16 relocs. Offset value of 0x00030000 |
| Attempting to start 3 APs |
| Waiting for 10ms after sending INIT. |
| Waiting for 1st SIPI to complete...done. |
| Waiting for 2nd SIPI to complete...AP: slot 1 apic_id 1. |
| done. |
| AP: slot 2 apic_id 3. |
| AP: slot 3 apic_id 2. |
| Loading module at 00038000 with entry 00038000. filesize: 0x1a8 memsize: 0x1a8 |
| Processing 13 relocs. Offset value of 0x00038000 |
| SMM Module: stub loaded at 00038000. Will call 7af9d6d8(00000000) |
| Installing SMM handler to 0x7b000000 |
| Loading module at 7b010000 with entry 7b010487. filesize: 0x1b90 memsize: 0x5bb8 |
| Processing 72 relocs. Offset value of 0x7b010000 |
| Loading module at 7b008000 with entry 7b008000. filesize: 0x1a8 memsize: 0x1a8 |
| Processing 13 relocs. Offset value of 0x7b008000 |
| SMM Module: placing jmp sequence at 7b007c00 rel16 0x03fd |
| SMM Module: placing jmp sequence at 7b007800 rel16 0x07fd |
| SMM Module: placing jmp sequence at 7b007400 rel16 0x0bfd |
| SMM Module: stub loaded at 7b008000. Will call 7b010487(00000000) |
| Initializing Southbridge SMI... |
| |
| New SMBASE 0x7b000000 |
| In relocation handler: cpu 0 |
| New SMBASE=0x7b000000 IEDBASE=0x7b400000 |
| Writing SMRR. base = 0x7b000006, mask=0xff800800 |
| Relocation complete. |
| microcode: Update skipped, already up-to-date |
| New SMBASE 0x7afffc00 |
| In relocation handler: cpu 1 |
| New SMBASE=0x7afffc00 IEDBASE=0x7b400000 |
| Writing SMRR. base = 0x7b000006, mask=0xff800800 |
| Relocation complete. |
| microcode: Update skipped, already up-to-date |
| New SMBASE 0x7afff400 |
| In relocation handler: cpu 3 |
| New SMBASE=0x7afff400 IEDBASE=0x7b400000 |
| Writing SMRR. base = 0x7b000006, mask=0xff800800 |
| Relocation complete. |
| microcode: Update skipped, already up-to-date |
| New SMBASE 0x7afff800 |
| In relocation handler: cpu 2 |
| New SMBASE=0x7afff800 IEDBASE=0x7b400000 |
| Writing SMRR. base = 0x7b000006, mask=0xff800800 |
| Relocation complete. |
| microcode: Update skipped, already up-to-date |
| Initializing CPU #0 |
| CPU: vendor Intel device 306a9 |
| CPU: family 06, model 3a, stepping 09 |
| Enabling cache |
| CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz. |
| CPU: platform id 4 |
| CPU: cpuid(1) 0x306a9 |
| CPU: AES supported |
| CPU: TXT supported |
| CPU: VT supported |
| Setting up local APIC... |
| apic_id: 0x00 done. |
| IA32_FEATURE_CONTROL already locked; VMX status: enabled |
| IA32_FEATURE_CONTROL already locked |
| model_x06ax: energy policy set to 6 |
| model_x06ax: frequency set to 2600 |
| Turbo is available but hidden |
| Turbo has been enabled |
| CPU #0 initialized |
| Initializing CPU #1 |
| Initializing CPU #3 |
| Initializing CPU #2 |
| CPU: vendor Intel device 306a9 |
| CPU: vendor Intel device 306a9 |
| CPU: family 06, model 3a, stepping 09 |
| CPU: family 06, model 3a, stepping 09 |
| Enabling cache |
| CPU: vendor Intel device 306a9 |
| CPU: family 06, model 3a, stepping 09 |
| Enabling cache |
| CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz. |
| Enabling cache |
| CPU: platform id 4 |
| CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz. |
| CPU: cpuid(1) 0x306a9 |
| CPU: platform id 4 |
| CPU: AES supported |
| CPU: TXT supported |
| CPU: VT supported |
| CPU: cpuid(1) 0x306a9 |
| Setting up local APIC... |
| CPU: AES supported |
| CPU: TXT supported |
| CPU: VT supported |
| apic_id: 0x03 done. |
| Setting up local APIC... |
| IA32_FEATURE_CONTROL already locked; VMX status: enabled |
| apic_id: 0x02 done. |
| IA32_FEATURE_CONTROL already locked |
| IA32_FEATURE_CONTROL already locked; VMX status: enabled |
| CPU: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz. |
| IA32_FEATURE_CONTROL already locked |
| CPU: platform id 4 |
| CPU: cpuid(1) 0x306a9 |
| CPU: AES supported |
| CPU: TXT supported |
| CPU: VT supported |
| model_x06ax: energy policy set to 6 |
| Setting up local APIC... |
| model_x06ax: frequency set to 2600 |
| model_x06ax: energy policy set to 6 |
| CPU #2 initialized |
| apic_id: 0x01 done. |
| model_x06ax: frequency set to 2600 |
| CPU #3 initialized |
| IA32_FEATURE_CONTROL already locked; VMX status: enabled |
| IA32_FEATURE_CONTROL already locked |
| model_x06ax: energy policy set to 6 |
| model_x06ax: frequency set to 2600 |
| CPU #1 initialized |
| bsp_do_flight_plan done after 19 msecs. |
| Initializing southbridge SMI... |
| SMI_STS: |
| GPE0_STS: GPIO14 GPIO11 GPIO9 GPIO6 GPIO5 GPIO4 GPIO3 GPIO0 |
| ALT_GP_SMI_STS: GPI14 GPI13 GPI11 GPI10 GPI9 GPI7 GPI6 GPI5 GPI4 GPI3 GPI1 GPI0 |
| TCO_STS: |
| Locking SMM. |
| CPU_CLUSTER: 0 init finished in 32981 usecs |
| PCI: 00:00.0 init ... |
| Disabling PEG12. |
| Disabling PEG11. |
| Disabling PEG10. |
| Disabling PEG60. |
| Disabling Device 7. |
| Disabling PEG IO clock. |
| Set BIOS_RESET_CPL |
| CPU TDP: 35 Watts |
| PCI: 00:00.0 init finished in 1017 usecs |
| PCI: 00:02.0 init ... |
| GT Power Management Init |
| IVB GT2 25W-35W Power Meter Weights |
| GT Power Management Init (post VBIOS) |
| |
| [0.133604] CONFIG => |
| [0.133605] (Primary => |
| [0.133606] (Port => Internal, |
| [0.133607] Framebuffer => |
| [0.133607] (Width => 640, |
| [0.133609] Height => 400, |
| [0.133610] Start_X => 0, |
| [0.133611] Start_Y => 0, |
| [0.133612] Stride => 1, |
| [0.133613] V_Stride => 1, |
| [0.133614] Tiling => Linear , |
| [0.133615] Rotation => No_Rotation, |
| [0.133616] Offset => 0xffffffff, |
| [0.133617] BPC => 8), |
| [0.133618] Mode => |
| [0.133618] (Dotclock => 96000000, |
| [0.133620] H_Visible => 1600, |
| [0.133621] H_Sync_Begin => 1648, |
| [0.133622] H_Sync_End => 1680, |
| [0.133623] H_Total => 1728, |
| [0.133624] V_Visible => 900, |
| [0.133625] V_Sync_Begin => 903, |
| [0.133626] V_Sync_End => 908, |
| [0.133627] V_Total => 926, |
| [0.133628] H_Sync_Active_High => False, |
| [0.133629] V_Sync_Active_High => False, |
| [0.133630] BPC => 5)), |
| [0.133631] Secondary => |
| [0.133631] (Port => Disabled, |
| [0.133633] Framebuffer => |
| [0.133633] (Width => 1, |
| [0.133635] Height => 1, |
| [0.133636] Start_X => 0, |
| [0.133637] Start_Y => 0, |
| [0.133638] Stride => 1, |
| [0.133639] V_Stride => 1, |
| [0.133640] Tiling => Linear , |
| [0.133641] Rotation => No_Rotation, |
| [0.133642] Offset => 0x00000000, |
| [0.133643] BPC => 8), |
| [0.133644] Mode => |
| [0.133644] (Dotclock => 19200000, |
| [0.133646] H_Visible => 1, |
| [0.133647] H_Sync_Begin => 1, |
| [0.133648] H_Sync_End => 1, |
| [0.133649] H_Total => 1, |
| [0.133650] V_Visible => 1, |
| [0.133651] V_Sync_Begin => 1, |
| [0.133652] V_Sync_End => 1, |
| [0.133653] V_Total => 1, |
| [0.133654] H_Sync_Active_High => False, |
| [0.133655] V_Sync_Active_High => False, |
| [0.133656] BPC => 5)), |
| [0.133657] Tertiary => |
| [0.133657] (Port => Disabled, |
| [0.133659] Framebuffer => |
| [0.133659] (Width => 1, |
| [0.133661] Height => 1, |
| [0.133662] Start_X => 0, |
| [0.133663] Start_Y => 0, |
| [0.133664] Stride => 1, |
| [0.133665] V_Stride => 1, |
| [0.133666] Tiling => Linear , |
| [0.133667] Rotation => No_Rotation, |
| [0.133668] Offset => 0x00000000, |
| [0.133669] BPC => 8), |
| [0.133670] Mode => |
| [0.133670] (Dotclock => 19200000, |
| [0.133672] H_Visible => 1, |
| [0.133673] H_Sync_Begin => 1, |
| [0.133674] H_Sync_End => 1, |
| [0.133675] H_Total => 1, |
| [0.133676] V_Visible => 1, |
| [0.133677] V_Sync_Begin => 1, |
| [0.133678] V_Sync_End => 1, |
| [0.133679] V_Total => 1, |
| [0.133680] H_Sync_Active_High => False, |
| [0.133681] V_Sync_Active_High => False, |
| [0.133682] BPC => 5))); |
| PCI: 00:02.0 init finished in 72040 usecs |
| PCI: 00:04.0 init ... |
| PCI: 00:04.0 init finished in 0 usecs |
| PCI: 00:19.0 init ... |
| PCI: 00:19.0 init finished in 0 usecs |
| PCI: 00:1a.0 init ... |
| EHCI: Setting up controller.. done. |
| PCI: 00:1a.0 init finished in 13 usecs |
| PCI: 00:1b.0 init ... |
| Azalia: base = e1528000 |
| Azalia: codec_mask = 09 |
| Azalia: Initializing codec #3 |
| Azalia: codec viddid: 80862805 |
| Azalia: No verb! |
| Azalia: Initializing codec #0 |
| Azalia: codec viddid: 14f1506e |
| Azalia: verb_size: 52 |
| Azalia: verb loaded. |
| PCI: 00:1b.0 init finished in 4309 usecs |
| PCI: 00:1c.0 init ... |
| Initializing PCH PCIe bridge. |
| PCI: 00:1c.0 init finished in 10 usecs |
| PCI: 00:1c.1 init ... |
| Initializing PCH PCIe bridge. |
| PCI: 00:1c.1 init finished in 13 usecs |
| PCI: 00:1c.3 init ... |
| Initializing PCH PCIe bridge. |
| PCI: 00:1c.3 init finished in 10 usecs |
| PCI: 00:1d.0 init ... |
| EHCI: Setting up controller.. done. |
| PCI: 00:1d.0 init finished in 13 usecs |
| PCI: 00:1f.0 init ... |
| pch: lpc_init |
| PCH: detected QM67, device id: 0x1c4f, rev id 0x5 |
| IOAPIC: Initializing IOAPIC at 0xfec00000 |
| IOAPIC: Bootstrap Processor Local APIC = 0x00 |
| IOAPIC: ID = 0x02 |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| Set power off after power failure. |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| NMI sources enabled. |
| CougarPoint PM init |
| RTC: failed = 0x0 |
| RTC Init |
| Disabling ACPI via APMC: |
| done. |
| pch_spi_init |
| PCI: 00:1f.0 init finished in 929 usecs |
| PCI: 00:1f.2 init ... |
| SATA: Initializing... |
| FMAP: area COREBOOT found @ 710200 (982528 bytes) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| SATA: Controller in AHCI mode. |
| ABAR: e152e000 |
| PCI: 00:1f.2 init finished in 360 usecs |
| PCI: 00:1f.3 init ... |
| PCI: 00:1f.3 init finished in 7 usecs |
| PCI: 00:1f.6 init ... |
| PCI: 00:1f.6 init finished in 0 usecs |
| PCI: 03:00.0 init ... |
| PCI: 03:00.0 init finished in 14 usecs |
| PNP: 00ff.2 init ... |
| PNP: 00ff.2 init finished in 1 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:54 init ... |
| I2C: 01:54 init finished in 2 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:55 init ... |
| I2C: 01:55 init finished in 1 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:56 init ... |
| I2C: 01:56 init finished in 1 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:57 init ... |
| I2C: 01:57 init finished in 1 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5c init ... |
| Locking EEPROM RFID |
| init EEPROM done |
| I2C: 01:5c init finished in 25888 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5d init ... |
| I2C: 01:5d init finished in 1 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5e init ... |
| I2C: 01:5e init finished in 1 usecs |
| smbus: PCI: 00:1f.3[0]->I2C: 01:5f init ... |
| I2C: 01:5f init finished in 1 usecs |
| Devices initialized |
| BS: BS_DEV_INIT times (us): entry 14918 run 137739 exit 0 |
| Finalize devices... |
| PCI: 00:1f.0 final |
| Devices finalized |
| BS: BS_POST_DEVICE times (us): entry 0 run 49 exit 0 |
| BS: BS_OS_RESUME_CHECK times (us): entry 0 run 2 exit 0 |
| CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| CBFS: Locating 'fallback/dsdt.aml' |
| CBFS: Found @ offset 44280 size 388f |
| CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| CBFS: Locating 'fallback/slic' |
| CBFS: 'fallback/slic' not found. |
| ACPI: Writing ACPI tables at 7af40000. |
| ACPI: * FACS |
| ACPI: * DSDT |
| ACPI: * FADT |
| ACPI: added table 1/32, length now 40 |
| ACPI: * SSDT |
| Found 1 CPU(s) with 4 core(s) each. |
| PSS: 2601MHz power 35000 control 0x2100 status 0x2100 |
| PSS: 2600MHz power 35000 control 0x1a00 status 0x1a00 |
| PSS: 2400MHz power 31561 control 0x1800 status 0x1800 |
| PSS: 2200MHz power 28247 control 0x1600 status 0x1600 |
| PSS: 2000MHz power 25084 control 0x1400 status 0x1400 |
| PSS: 1800MHz power 22064 control 0x1200 status 0x1200 |
| PSS: 1600MHz power 19135 control 0x1000 status 0x1000 |
| PSS: 1400MHz power 16344 control 0xe00 status 0xe00 |
| PSS: 1200MHz power 13666 control 0xc00 status 0xc00 |
| PSS: 2601MHz power 35000 control 0x2100 status 0x2100 |
| PSS: 2600MHz power 35000 control 0x1a00 status 0x1a00 |
| PSS: 2400MHz power 31561 control 0x1800 status 0x1800 |
| PSS: 2200MHz power 28247 control 0x1600 status 0x1600 |
| PSS: 2000MHz power 25084 control 0x1400 status 0x1400 |
| PSS: 1800MHz power 22064 control 0x1200 status 0x1200 |
| PSS: 1600MHz power 19135 control 0x1000 status 0x1000 |
| PSS: 1400MHz power 16344 control 0xe00 status 0xe00 |
| PSS: 1200MHz power 13666 control 0xc00 status 0xc00 |
| PSS: 2601MHz power 35000 control 0x2100 status 0x2100 |
| PSS: 2600MHz power 35000 control 0x1a00 status 0x1a00 |
| PSS: 2400MHz power 31561 control 0x1800 status 0x1800 |
| PSS: 2200MHz power 28247 control 0x1600 status 0x1600 |
| PSS: 2000MHz power 25084 control 0x1400 status 0x1400 |
| PSS: 1800MHz power 22064 control 0x1200 status 0x1200 |
| PSS: 1600MHz power 19135 control 0x1000 status 0x1000 |
| PSS: 1400MHz power 16344 control 0xe00 status 0xe00 |
| PSS: 1200MHz power 13666 control 0xc00 status 0xc00 |
| PSS: 2601MHz power 35000 control 0x2100 status 0x2100 |
| PSS: 2600MHz power 35000 control 0x1a00 status 0x1a00 |
| PSS: 2400MHz power 31561 control 0x1800 status 0x1800 |
| PSS: 2200MHz power 28247 control 0x1600 status 0x1600 |
| PSS: 2000MHz power 25084 control 0x1400 status 0x1400 |
| PSS: 1800MHz power 22064 control 0x1200 status 0x1200 |
| PSS: 1600MHz power 19135 control 0x1000 status 0x1000 |
| PSS: 1400MHz power 16344 control 0xe00 status 0xe00 |
| PSS: 1200MHz power 13666 control 0xc00 status 0xc00 |
| Generating ACPI PIRQ entries |
| \_SB.PCI0.LPCB.TPM: LPC TPM PNP: 0c31.0 |
| ACPI: * H8 |
| H8: BDC installed |
| H8: WWAN detection not implemented. Assuming WWAN installed |
| ACPI: added table 2/32, length now 44 |
| ACPI: * MCFG |
| ACPI: added table 3/32, length now 48 |
| ACPI: * TCPA |
| TCPA log created at 7af2f000 |
| ACPI: added table 4/32, length now 52 |
| ACPI: * MADT |
| ACPI: added table 5/32, length now 56 |
| current = 7af45900 |
| ACPI: * DMAR |
| ACPI: added table 6/32, length now 60 |
| current = 7af459d0 |
| CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| CBFS: Locating 'vbt.bin' |
| CBFS: Found @ offset 3eb00 size 558 |
| Found a VBT of 3985 bytes after decompression |
| GMA: Found VBT in CBFS |
| GMA: Found valid VBT in CBFS |
| ACPI: * HPET |
| ACPI: added table 7/32, length now 64 |
| ACPI: done. |
| ACPI tables: 31248 bytes. |
| smbios_write_tables: 7af2e000 |
| Create SMBIOS type 17 |
| SMBIOS tables: 788 bytes. |
| Writing table forward entry at 0x00000500 |
| Wrote coreboot table at: 00000500, 0x10 bytes, checksum 44e8 |
| Writing coreboot table at 0x7af64000 |
| CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| CBFS: Locating 'cmos_layout.bin' |
| CBFS: Found @ offset 3f0c0 size 7c8 |
| 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES |
| 1. 0000000000001000-000000000009ffff: RAM |
| 2. 00000000000a0000-00000000000fffff: RESERVED |
| 3. 0000000000100000-000000007af2dfff: RAM |
| 4. 000000007af2e000-000000007af7cfff: CONFIGURATION TABLES |
| 5. 000000007af7d000-000000007afccfff: RAMSTAGE |
| 6. 000000007afcd000-000000007affffff: CONFIGURATION TABLES |
| 7. 000000007b000000-000000007d9fffff: RESERVED |
| 8. 00000000f0000000-00000000f3ffffff: RESERVED |
| 9. 00000000fed40000-00000000fed44fff: RESERVED |
| 10. 00000000fed90000-00000000fed91fff: RESERVED |
| 11. 0000000100000000-00000001005fffff: RAM |
| CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| Wrote coreboot table at: 7af64000, 0xb58 bytes, checksum ae8b |
| coreboot table: 2928 bytes. |
| IMD ROOT 0. 7afff000 00001000 |
| IMD SMALL 1. 7affe000 00001000 |
| CONSOLE 2. 7afde000 00020000 |
| TIME STAMP 3. 7afdd000 00000910 |
| MRC DATA 4. 7afdc000 000005d4 |
| ROMSTG STCK 5. 7afd7000 00005000 |
| AFTER CAR 6. 7afcd000 0000a000 |
| RAMSTAGE 7. 7af7c000 00051000 |
| SMM BACKUP 8. 7af6c000 00010000 |
| COREBOOT 9. 7af64000 00008000 |
| ACPI 10. 7af40000 00024000 |
| ACPI GNVS 11. 7af3f000 00001000 |
| TCPA TCGLOG12. 7af2f000 00010000 |
| SMBIOS 13. 7af2e000 00000800 |
| IMD small region: |
| IMD ROOT 0. 7affec00 00000400 |
| USBDEBUG 1. 7affeba0 00000050 |
| MEM INFO 2. 7affe9e0 000001a9 |
| ROMSTAGE 3. 7affe9c0 00000004 |
| COREBOOTFWD 4. 7affe980 00000028 |
| BS: BS_WRITE_TABLES times (us): entry 0 run 25937 exit 0 |
| CBFS: 'Master Header Locator' located CBFS at [710200:800000) |
| CBFS: Locating 'fallback/payload' |
| CBFS: Found @ offset 47b80 size 109e9 |
| Checking segment from ROM address 0xfff57db8 |
| Payload being loaded at below 1MiB without region being marked as RAM usable. |
| Checking segment from ROM address 0xfff57dd4 |
| Loading segment from ROM address 0xfff57db8 |
| code (compression=1) |
| New segment dstaddr 0x000e0620 memsize 0x1f9e0 srcaddr 0xfff57df0 filesize 0x109b1 |
| Loading Segment: addr: 0x000e0620 memsz: 0x000000000001f9e0 filesz: 0x00000000000109b1 |
| using LZMA |
| Loading segment from ROM address 0xfff57dd4 |
| Entry Point 0x000fec22 |
| BS: BS_PAYLOAD_LOAD times (us): entry 0 run 28594 exit 0 |
| ICH-NM10-PCH: watchdog disabled |
| Jumping to boot code at 000fec22(7af64000) |
| SeaBIOS (version rel-1.12.1-0-ga5cab58) |
| BUILD: gcc: (coreboot toolchain v1.50 October 15th, 2017) 6.3.0 binutils: (GNU Binutils) 2.29.1 |
| Found coreboot cbmem console @ 7afde000 |
| Found mainboard LENOVO ThinkPad T420 |
| Relocating init from 0x000e1c80 to 0x7aee11a0 (size 52672) |
| Found CBFS header at 0xfff10238 |
| multiboot: eax=7afb6d80, ebx=7afb6d34 |
| Found 15 PCI devices (max PCI bus is 03) |
| Copying SMBIOS entry point from 0x7af2e000 to 0x000f6620 |
| Copying ACPI RSDP from 0x7af40000 to 0x000f65f0 |
| Using pmtimer, ioport 0x508 |
| Scan for VGA option rom |
| Running option rom at c000:0003 |
| pmm call arg1=0 |
| Turning on vga text mode console |
| SeaBIOS (version rel-1.12.1-0-ga5cab58) |
| Machine UUID 7293a901-521d-11cb-a5cc-83382c69bc4d |
| EHCI init on dev 00:1a.0 (regs=0xe152f020) |
| EHCI init on dev 00:1d.0 (regs=0xe1530020) |
| AHCI controller at 00:1f.2, iobase 0xe152e000, irq 10 |
| Searching bootorder for: /pci@i0cf8/pci-bridge@1c,3/*@0 |
| Found 0 lpt ports |
| Found 0 serial ports |
| Searching bootorder for: /pci@i0cf8/*@1f,2/drive@1/disk@0 |
| AHCI/1: registering: "DVD/CD [AHCI/1: HL-DT-STDVDRAM GT33N ATAPI-7 DVD/CD]" |
| Searching bootorder for: /pci@i0cf8/usb@1a/hub@1/storage@1/*@0/*@0,0 |
| Searching bootorder for: /pci@i0cf8/usb@1a/hub@1/usb-*@1 |
| USB MSC vendor='PLEXTOR' product='PX-128M6Pro' rev='' type=0 removable=0 |
| USB MSC blksize=512 sectors=250069680 |
| Initialized USB HUB (1 ports used) |
| Initialized USB HUB (0 ports used) |
| PS2 keyboard initialized |
| All threads complete. |
| Scan for option roms |
| |
| Press ESC for boot menu. |
| |
| Select boot device: |
| |
| 1. DVD/CD [AHCI/1: HL-DT-STDVDRAM GT33N ATAPI-7 DVD/CD] |
| 2. USB MSC Drive PLEXTOR PX-128M6Pro |
| |
| t. TPM Configuration |
| |
| Searching bootorder for: HALT |
| drive 0x000f6550: PCHS=0/0/0 translation=lba LCHS=1024/255/63 s=250069680 |
| Space available for UMB: c7000-ed000, f5e40-f6520 |
| Returned 253952 bytes of ZoneHigh |
| e820 map has 9 items: |
| 0: 0000000000000000 - 000000000009fc00 = 1 RAM |
| 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED |
| 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED |
| 3: 0000000000100000 - 000000007af2c000 = 1 RAM |
| 4: 000000007af2c000 - 000000007da00000 = 2 RESERVED |
| 5: 00000000f0000000 - 00000000f4000000 = 2 RESERVED |
| 6: 00000000fed40000 - 00000000fed45000 = 2 RESERVED |
| 7: 00000000fed90000 - 00000000fed92000 = 2 RESERVED |
| 8: 0000000100000000 - 0000000100600000 = 1 RAM |
| enter handle_19: |
| NULL |
| Booting from Hard Disk... |
| Booting from 0000:7c00 |
| |