blob: 664c3aaef7d70eda74dc7089fef5a8be3a4a6603 [file] [log] [blame]
Kyösti Mälkki2c1dcb22017-07-23 18:38:33 +03001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.16.0-1-grml-amd64 (team@grml.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-1+grml.1 (2014-11-05)
5[ 0.000000] Command line: initrd=/boot/grml64small/initrd.img apm=power-off vga=791 nomce live-media-path=/live/grml64-small/ boot=live bootid=grml64small201411 ssh=remote verbose console=ttyS0,115200n8 toram=grml64-small.squashfs BOOT_IMAGE=/boot/grml64small/vmlinuz
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
8[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
9[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9bfff] usable
11[ 0.000000] BIOS-e820: [mem 0x00000000bff9c000-0x00000000dfffffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
13[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable
14[ 0.000000] NX (Execute Disable) protection: active
15[ 0.000000] SMBIOS 2.7 present.
16[ 0.000000] DMI: ASROCK IMB-A180/IMB-A180, BIOS 4.6-812-g4a1d450 07/22/2017
17[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
18[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
19[ 0.000000] AGP: No AGP bridge found
20[ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000
21[ 0.000000] MTRR default type: uncachable
22[ 0.000000] MTRR fixed ranges enabled:
23[ 0.000000] 00000-9FFFF write-back
24[ 0.000000] A0000-BFFFF uncachable
25[ 0.000000] C0000-FFFFF write-back
26[ 0.000000] MTRR variable ranges enabled:
27[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
28[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
29[ 0.000000] 2 disabled
30[ 0.000000] 3 disabled
31[ 0.000000] 4 disabled
32[ 0.000000] 5 disabled
33[ 0.000000] 6 base 00FF800000 mask FFFF800000 write-protect
34[ 0.000000] 7 disabled
35[ 0.000000] TOM2: 0000000220000000 aka 8704M
36[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
37[ 0.000000] e820: last_pfn = 0xbff9c max_arch_pfn = 0x400000000
38[ 0.000000] found SMP MP-table at [mem 0x000f0700-0x000f070f] mapped at [ffff8800000f0700]
39[ 0.000000] Scanning 1 areas for low memory corruption
40[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
41[ 0.000000] Using GB pages for direct mapping
42[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
43[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
44[ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE
45[ 0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE
46[ 0.000000] BRK [0x01afa000, 0x01afafff] PGTABLE
47[ 0.000000] init_memory_mapping: [mem 0x21fe00000-0x21fffffff]
48[ 0.000000] [mem 0x21fe00000-0x21fffffff] page 2M
49[ 0.000000] BRK [0x01afb000, 0x01afbfff] PGTABLE
50[ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21fdfffff]
51[ 0.000000] [mem 0x21c000000-0x21fdfffff] page 2M
52[ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff]
53[ 0.000000] [mem 0x200000000-0x21bffffff] page 2M
54[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9bfff]
55[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
56[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
57[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
58[ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M
59[ 0.000000] [mem 0xbfe00000-0xbff9bfff] page 4k
60[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
61[ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
62[ 0.000000] RAMDISK: [mem 0x7e84b000-0x7fffefff]
63[ 0.000000] ACPI: Early table checksum verification disabled
64[ 0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE )
65[ 0.000000] ACPI: XSDT 0x00000000BFFAF0E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000)
66[ 0.000000] ACPI: FACP 0x00000000BFFB0910 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000)
67[ 0.000000] ACPI: DSDT 0x00000000BFFAF280 001684 (v02 AMD COREBOOT 00010001 INTL 20161222)
68[ 0.000000] ACPI: FACS 0x00000000BFFAF240 000040
69[ 0.000000] ACPI: SSDT 0x00000000BFFB0A10 00008A (v02 CORE COREBOOT 0000002A CORE 0000002A)
70[ 0.000000] ACPI: TCPA 0x00000000BFFB0AA0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000)
71[ 0.000000] ACPI: APIC 0x00000000BFFB0AE0 00006E (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: HEST 0x00000000BFFB0B50 0001D0 (v01 CORE COREBOOT 00000000 CORE 00000000)
73[ 0.000000] ACPI: SSDT 0x00000000BFFB0D20 0046D1 (v02 AMD AGESA 00000002 MSFT 04000000)
74[ 0.000000] ACPI: SSDT 0x00000000BFFB5400 00043C (v01 AMD AGESA 00000001 AMD 00000001)
75[ 0.000000] ACPI: HPET 0x00000000BFFB5840 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
76[ 0.000000] ACPI: Local APIC address 0xfee00000
77[ 0.000000] No NUMA configuration found
78[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff]
79[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21fffffff]
80[ 0.000000] NODE_DATA [mem 0x21fff9000-0x21fffdfff]
81[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217e00000-ffff88021e7fffff] on node 0
82[ 0.000000] Zone ranges:
83[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
84[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
85[ 0.000000] Normal [mem 0x100000000-0x21fffffff]
86[ 0.000000] Movable zone start for each node
87[ 0.000000] Early memory node ranges
88[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
89[ 0.000000] node 0: [mem 0x00100000-0xbff9bfff]
90[ 0.000000] node 0: [mem 0x100000000-0x21fffffff]
91[ 0.000000] On node 0 totalpages: 1965882
92[ 0.000000] DMA zone: 56 pages used for memmap
93[ 0.000000] DMA zone: 21 pages reserved
94[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
95[ 0.000000] DMA32 zone: 10695 pages used for memmap
96[ 0.000000] DMA32 zone: 782236 pages, LIFO batch:31
97[ 0.000000] Normal zone: 16128 pages used for memmap
98[ 0.000000] Normal zone: 1179648 pages, LIFO batch:31
99[ 0.000000] ACPI: PM-Timer IO Port: 0x818
100[ 0.000000] ACPI: Local APIC address 0xfee00000
101[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
102[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
103[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
104[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
105[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
106[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24])
107[ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55
108[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
109[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
110[ 0.000000] ACPI: IRQ0 used by override.
111[ 0.000000] ACPI: IRQ2 used by override.
112[ 0.000000] ACPI: IRQ9 used by override.
113[ 0.000000] Using ACPI (MADT) for SMP configuration information
114[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
115[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
116[ 0.000000] nr_irqs_gsi: 72
117[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
118[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
119[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
120[ 0.000000] PM: Registered nosave memory: [mem 0xbff9c000-0xdfffffff]
121[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
122[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
123[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff]
124[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
125[ 0.000000] Booting paravirtualized kernel on bare hardware
126[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
127[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s85824 r8192 d20672 u1048576
128[ 0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152
129[ 0.000000] pcpu-alloc: [0] 0 1
130[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1938982
131[ 0.000000] Policy zone: Normal
132[ 0.000000] Kernel command line: initrd=/boot/grml64small/initrd.img apm=power-off vga=791 nomce live-media-path=/live/grml64-small/ boot=live bootid=grml64small201411 ssh=remote verbose console=ttyS0,115200n8 toram=grml64-small.squashfs BOOT_IMAGE=/boot/grml64small/vmlinuz
133[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
134[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
135[ 0.000000] AGP: Checking aperture...
136[ 0.000000] AGP: No AGP bridge found
137[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
138[ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole
139[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
140[ 0.000000] AGP: This costs you 64MB of RAM
141[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
142[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
143[ 0.000000] Memory: 7587280K/7863528K available (5357K kernel code, 947K rwdata, 1928K rodata, 1220K init, 840K bss, 276248K reserved)
144[ 0.000000] Hierarchical RCU implementation.
145[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
146[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
147[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
148[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
149[ 0.000000] Console: colour dummy device 80x25
150[ 0.000000] console [ttyS0] enabled
151[ 0.000000] hpet clockevent registered
152[ 0.000000] tsc: Fast TSC calibration using PIT
153[ 0.000000] tsc: Detected 998.278 MHz processor
154[ 0.000077] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.55 BogoMIPS (lpj=3993112)
155[ 0.010724] pid_max: default: 32768 minimum: 301
156[ 0.015377] ACPI: Core revision 20140424
157[ 0.038324] ACPI: All ACPI Tables successfully acquired
158[ 0.043689] Security Framework initialized
159[ 0.047814] AppArmor: AppArmor disabled by boot time parameter
160[ 0.053655] Yama: disabled by default; enable with sysctl kernel.yama.*
161[ 0.061807] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
162[ 0.074965] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
163[ 0.085021] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
164[ 0.091939] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
165[ 0.099990] Initializing cgroup subsys memory
166[ 0.104382] Initializing cgroup subsys devices
167[ 0.108858] Initializing cgroup subsys freezer
168[ 0.113322] Initializing cgroup subsys net_cls
169[ 0.117795] Initializing cgroup subsys blkio
170[ 0.122090] Initializing cgroup subsys perf_event
171[ 0.126807] Initializing cgroup subsys net_prio
172[ 0.131417] tseg: 0000000000
173[ 0.131431] CPU: Physical Processor ID: 0
174[ 0.135455] CPU: Processor Core ID: 0
175[ 0.139135] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
176Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
177tlb_flushall_shift: 6
178[ 0.154577] Freeing SMP alternatives memory: 20K (ffffffff81a1f000 - ffffffff81a24000)
179[ 0.165223] ftrace: allocating 22111 entries in 87 pages
180[ 0.193274] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
181[ 0.238819] smpboot: CPU0: AMD E1-2100 APU with Radeon(TM) HD Graphics (fam: 16, model: 00, stepping: 01)
182[ 0.352764] Performance Events: AMD PMU driver.
183[ 0.357334] ... version: 0
184[ 0.361349] ... bit width: 48
185[ 0.365450] ... generic registers: 4
186[ 0.369464] ... value mask: 0000ffffffffffff
187[ 0.374777] ... max period: 00007fffffffffff
188[ 0.380089] ... fixed-purpose events: 0
189[ 0.384102] ... event mask: 000000000000000f
190[ 0.393940] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
191[ 0.402297] x86: Booting SMP configuration:
192[ 0.406489] .... node #0, CPUs: #1
193[ 0.423431] x86: Booted up 1 node, 2 CPUs
194[ 0.427657] smpboot: Total of 2 processors activated (3993.11 BogoMIPS)
195[ 0.435149] devtmpfs: initialized
196[ 0.453878] pinctrl core: initialized pinctrl subsystem
197[ 0.459359] NET: Registered protocol family 16
198[ 0.464273] cpuidle: using governor ladder
199[ 0.468381] cpuidle: using governor menu
200[ 0.472508] ACPI: bus type PCI registered
201[ 0.476525] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
202[ 0.483221] PCI: Using configuration type 1 for base access
203[ 0.488797] PCI: Using configuration type 1 for extended access
204[ 0.510068] ACPI: Added _OSI(Module Device)
205[ 0.514269] ACPI: Added _OSI(Processor Device)
206[ 0.518716] ACPI: Added _OSI(3.0 _SCP Extensions)
207[ 0.523424] ACPI: Added _OSI(Processor Aggregator Device)
208[ 0.532295] ACPI: Executed 2 blocks of module-level executable AML code
209[ 0.548922] ACPI: Interpreter enabled
210[ 0.552640] ACPI: (supports S0 S1 S2 S3 S4 S5)
211[ 0.557093] ACPI: Using IOAPIC for interrupt routing
212[ 0.562111] HEST: Table parsing has been initialized.
213[ 0.567177] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
214[ 0.584491] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
215[ 0.590692] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
216[ 0.599129] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
217[ 0.607374] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x0000-0x0cf7] ignored
218[ 0.617641] PCI host bridge to bus 0000:00
219[ 0.621750] pci_bus 0000:00: root bus resource [bus 00-ff]
220[ 0.627242] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
221[ 0.633430] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
222[ 0.639620] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
223[ 0.646501] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
224[ 0.653383] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff]
225[ 0.660281] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000
226[ 0.660546] pci 0000:00:01.0: [1002:9834] type 00 class 0x030000
227[ 0.660575] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
228[ 0.660593] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
229[ 0.660607] pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff]
230[ 0.660621] pci 0000:00:01.0: reg 0x24: [mem 0xf0b00000-0xf0b3ffff]
231[ 0.660634] pci 0000:00:01.0: reg 0x30: [mem 0xf0b40000-0xf0b5ffff pref]
232[ 0.660698] pci 0000:00:01.0: supports D1 D2
233[ 0.660705] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
234[ 0.660945] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
235[ 0.660971] pci 0000:00:01.1: reg 0x10: [mem 0xf0b60000-0xf0b63fff 64bit]
236[ 0.661066] pci 0000:00:01.1: supports D1 D2
237[ 0.661267] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000
238[ 0.661511] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
239[ 0.661620] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
240[ 0.661735] pci 0000:00:02.3: System wakeup disabled by ACPI
241[ 0.667537] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
242[ 0.667645] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
243[ 0.667760] pci 0000:00:02.4: System wakeup disabled by ACPI
244[ 0.673581] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
245[ 0.673609] pci 0000:00:11.0: reg 0x10: [io 0x3410-0x3417]
246[ 0.673623] pci 0000:00:11.0: reg 0x14: [io 0x3420-0x3423]
247[ 0.673638] pci 0000:00:11.0: reg 0x18: [io 0x3418-0x341f]
248[ 0.673652] pci 0000:00:11.0: reg 0x1c: [io 0x3424-0x3427]
249[ 0.673666] pci 0000:00:11.0: reg 0x20: [io 0x3400-0x340f]
250[ 0.673680] pci 0000:00:11.0: reg 0x24: [mem 0xf0b6b000-0xf0b6b3ff]
251[ 0.673735] pci 0000:00:11.0: PME# supported from D3hot
252[ 0.673962] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
253[ 0.673989] pci 0000:00:12.0: reg 0x10: [mem 0xf0b68000-0xf0b68fff]
254[ 0.674182] pci 0000:00:12.0: System wakeup disabled by ACPI
255[ 0.679985] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
256[ 0.680014] pci 0000:00:12.2: reg 0x10: [mem 0xf0b6c000-0xf0b6c0ff]
257[ 0.680117] pci 0000:00:12.2: supports D1 D2
258[ 0.680123] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
259[ 0.680231] pci 0000:00:12.2: System wakeup disabled by ACPI
260[ 0.686038] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
261[ 0.686064] pci 0000:00:13.0: reg 0x10: [mem 0xf0b69000-0xf0b69fff]
262[ 0.686258] pci 0000:00:13.0: System wakeup disabled by ACPI
263[ 0.692066] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
264[ 0.692094] pci 0000:00:13.2: reg 0x10: [mem 0xf0b6d000-0xf0b6d0ff]
265[ 0.692197] pci 0000:00:13.2: supports D1 D2
266[ 0.692203] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
267[ 0.692312] pci 0000:00:13.2: System wakeup disabled by ACPI
268[ 0.698120] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
269[ 0.698396] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
270[ 0.698427] pci 0000:00:14.2: reg 0x10: [mem 0xf0b64000-0xf0b67fff 64bit]
271[ 0.698515] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
272[ 0.698737] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
273[ 0.699010] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
274[ 0.699036] pci 0000:00:14.7: reg 0x10: [mem 0xf0b6e000-0xf0b6e0ff 64bit]
275[ 0.699290] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310
276[ 0.699317] pci 0000:00:16.0: reg 0x10: [mem 0xf0b6a000-0xf0b6afff]
277[ 0.699510] pci 0000:00:16.0: System wakeup disabled by ACPI
278[ 0.705315] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320
279[ 0.705344] pci 0000:00:16.2: reg 0x10: [mem 0xf0b6f000-0xf0b6f0ff]
280[ 0.705446] pci 0000:00:16.2: supports D1 D2
281[ 0.705452] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot D3cold
282[ 0.705561] pci 0000:00:16.2: System wakeup disabled by ACPI
283[ 0.711361] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000
284[ 0.711579] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000
285[ 0.711791] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000
286[ 0.712005] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000
287[ 0.712228] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000
288[ 0.712438] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000
289[ 0.712819] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
290[ 0.712848] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff]
291[ 0.712883] pci 0000:01:00.0: reg 0x18: [mem 0xf090c000-0xf090cfff 64bit]
292[ 0.712908] pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref]
293[ 0.713022] pci 0000:01:00.0: supports D1 D2
294[ 0.713028] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
295[ 0.713214] pci 0000:01:00.1: [10ec:816a] type 00 class 0x070002
296[ 0.713242] pci 0000:01:00.1: reg 0x10: [io 0x1400-0x14ff]
297[ 0.713278] pci 0000:01:00.1: reg 0x18: [mem 0xf090d000-0xf090dfff 64bit]
298[ 0.713302] pci 0000:01:00.1: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit]
299[ 0.713399] pci 0000:01:00.1: supports D1 D2
300[ 0.713405] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
301[ 0.713575] pci 0000:01:00.2: [10ec:816b] type 00 class 0x070002
302[ 0.713603] pci 0000:01:00.2: reg 0x10: [io 0x1800-0x18ff]
303[ 0.713638] pci 0000:01:00.2: reg 0x18: [mem 0xf090e000-0xf090efff 64bit]
304[ 0.713662] pci 0000:01:00.2: reg 0x20: [mem 0xf0904000-0xf0907fff 64bit]
305[ 0.713759] pci 0000:01:00.2: supports D1 D2
306[ 0.713765] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold
307[ 0.713936] pci 0000:01:00.3: [10ec:816c] type 00 class 0x0c0701
308[ 0.713963] pci 0000:01:00.3: reg 0x10: [io 0x1c00-0x1cff]
309[ 0.713999] pci 0000:01:00.3: reg 0x18: [mem 0xf090f000-0xf090f0ff 64bit]
310[ 0.714023] pci 0000:01:00.3: reg 0x20: [mem 0xf0908000-0xf090bfff 64bit]
311[ 0.714119] pci 0000:01:00.3: supports D1 D2
312[ 0.714125] pci 0000:01:00.3: PME# supported from D0 D1 D2 D3hot D3cold
313[ 0.720812] pci 0000:00:02.3: PCI bridge to [bus 01]
314[ 0.725795] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
315[ 0.725804] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff]
316[ 0.725815] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
317[ 0.725967] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
318[ 0.725995] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
319[ 0.726030] pci 0000:02:00.0: reg 0x18: [mem 0xf0a04000-0xf0a04fff 64bit pref]
320[ 0.726054] pci 0000:02:00.0: reg 0x20: [mem 0xf0a00000-0xf0a03fff 64bit pref]
321[ 0.726166] pci 0000:02:00.0: supports D1 D2
322[ 0.726172] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
323[ 0.732794] pci 0000:00:02.4: PCI bridge to [bus 02]
324[ 0.737772] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff]
325[ 0.737785] pci 0000:00:02.4: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref]
326[ 0.738352] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15)
327[ 0.745293] ACPI: PCI Interrupt Link [INTB] (IRQs 3 *4 5 7 10 11 12 15)
328[ 0.752224] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15)
329[ 0.759157] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15)
330[ 0.766101] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15)
331[ 0.773040] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10
332[ 0.778563] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0
333[ 0.785689] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0
334[ 0.792972] ACPI: Enabled 5 GPEs in block 00 to 1F
335[ 0.798164] vgaarb: setting as boot device: PCI:0000:00:01.0
336[ 0.803824] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
337[ 0.811929] vgaarb: loaded
338[ 0.814646] vgaarb: bridge control possible 0000:00:01.0
339[ 0.820150] PCI: Using ACPI for IRQ routing
340[ 0.824341] PCI: pci_cache_line_size set to 64 bytes
341[ 0.824441] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
342[ 0.824447] e820: reserve RAM buffer [mem 0xbff9c000-0xbfffffff]
343[ 0.824941] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
344[ 0.829898] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
345[ 0.837820] Switched to clocksource hpet
346[ 0.858715] pnp: PnP ACPI init
347[ 0.861841] ACPI: bus type PNP registered
348[ 0.866291] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
349[ 0.872936] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
350[ 0.873062] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
351[ 0.873442] pnp: PnP ACPI: found 2 devices
352[ 0.877547] ACPI: bus type PNP unregistered
353[ 0.893384] pci 0000:00:02.3: PCI bridge to [bus 01]
354[ 0.898364] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff]
355[ 0.904472] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff]
356[ 0.911267] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
357[ 0.919019] pci 0000:00:02.4: PCI bridge to [bus 02]
358[ 0.924000] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff]
359[ 0.930105] pci 0000:00:02.4: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref]
360[ 0.937864] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
361[ 0.937871] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
362[ 0.937877] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
363[ 0.937883] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
364[ 0.937890] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff]
365[ 0.937896] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
366[ 0.937902] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff]
367[ 0.937908] pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
368[ 0.937915] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
369[ 0.937921] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf0afffff 64bit pref]
370[ 0.938041] NET: Registered protocol family 2
371[ 0.943099] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
372[ 0.950862] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
373[ 0.958024] TCP: Hash tables configured (established 65536 bind 65536)
374[ 0.964665] TCP: reno registered
375[ 0.967945] UDP hash table entries: 4096 (order: 5, 131072 bytes)
376[ 0.974149] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
377[ 0.980953] NET: Registered protocol family 1
378[ 0.985372] pci 0000:00:01.0: Video device with shadowed ROM
379[ 0.988110] PCI: CLS 64 bytes, default 64
380[ 0.988263] Unpacking initramfs...
381[ 8.999156] Freeing initrd memory: 24272K (ffff88007e84b000 - ffff88007ffff000)
382[ 9.006502] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
383[ 9.012957] software IO TLB [mem 0xbbf9c000-0xbff9c000] (64MB) mapped at [ffff8800bbf9c000-ffff8800bff9bfff]
384[ 9.023185] perf: AMD NB counters detected
385[ 9.027298] perf: AMD L2I counters detected
386[ 9.031626] microcode: CPU0: patch_level=0x0700010b
387[ 9.036531] microcode: CPU1: patch_level=0x0700010b
388[ 9.041573] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
389[ 9.050378] LVT offset 0 assigned for vector 0x400
390[ 9.055191] perf: AMD IBS detected (0x000000ff)
391[ 9.059803] Scanning for low memory corruption every 60 seconds
392[ 9.066544] futex hash table entries: 512 (order: 3, 32768 bytes)
393[ 9.072729] audit: initializing netlink subsys (disabled)
394[ 9.078181] audit: type=2000 audit(1500689200.836:1): initialized
395[ 9.085325] HugeTLB registered 2 MB page size, pre-allocated 0 pages
396[ 9.091777] zbud: loaded
397[ 9.094768] VFS: Disk quotas dquot_6.5.2
398[ 9.098744] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
399[ 9.105286] squashfs: version 4.0 (2009/01/31) Phillip Lougher
400[ 9.111311] aufs 3.16-20140908
401[ 9.114381] msgmni has been set to 14866
402[ 9.119244] alg: No test for stdrng (krng)
403[ 9.123435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
404[ 9.130970] io scheduler noop registered
405[ 9.134910] io scheduler deadline registered
406[ 9.139297] io scheduler cfq registered (default)
407[ 9.144249] pcieport 0000:00:02.3: device [1022:1439] has invalid IRQ; check vendor BIOS
408[ 9.152591] pcieport 0000:00:02.3: irq 72 for MSI/MSI-X
409[ 9.152738] pcieport 0000:00:02.4: device [1022:1439] has invalid IRQ; check vendor BIOS
410[ 9.161001] pcieport 0000:00:02.4: irq 73 for MSI/MSI-X
411[ 9.161240] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt
412[ 9.168214] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
413[ 9.174745] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
414[ 9.181283] pci 0000:01:00.2: Signaling PME through PCIe PME interrupt
415[ 9.187821] pci 0000:01:00.3: Signaling PME through PCIe PME interrupt
416[ 9.194361] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded
417[ 9.194412] pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt
418[ 9.201390] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
419[ 9.207923] pcie_pme 0000:00:02.4:pcie01: service driver pcie_pme loaded
420[ 9.207983] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
421[ 9.213619] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
422[ 9.220507] GHES: Failed to enable APEI firmware first mode.
423[ 9.226410] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
424[ 9.253160] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
425[ 9.281406] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
426[ 9.309641] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
427[ 9.337888] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A
428[ 9.346530] Linux agpgart interface v0.103
429[ 9.350912] i8042: PNP: No PS/2 controller found. Probing ports directly.
430[ 9.362452] serio: i8042 KBD port at 0x60,0x64 irq 1
431[ 9.367444] serio: i8042 AUX port at 0x60,0x64 irq 12
432[ 9.372862] mousedev: PS/2 mouse device common for all mice
433[ 9.378579] rtc_cmos 00:01: RTC can wake from S4
434[ 9.383454] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
435[ 9.389598] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
436[ 9.396692] ledtrig-cpu: registered to indicate activity on CPUs
437[ 9.402927] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
438[ 9.409378] AMD IOMMUv2 functionality not available on this system
439[ 9.415841] TCP: cubic registered
440[ 9.419253] NET: Registered protocol family 10
441[ 9.424285] mip6: Mobile IPv6
442[ 9.427285] NET: Registered protocol family 17
443[ 9.431767] mpls_gso: MPLS GSO support
444[ 9.435538] mce: Unable to init device /dev/mcelog (rc: -5)
445[ 9.441695] registered taskstats version 1
446[ 9.446858] rtc_cmos 00:01: setting system clock to 2017-07-22 02:06:42 UTC (1500689202)
447[ 9.455124] PM: Hibernation image not present or could not be loaded.
448[ 9.458306] Freeing unused kernel memory: 1220K (ffffffff818ee000 - ffffffff81a1f000)
449[ 9.466164] Write protecting the kernel read-only data: 8192k
450[ 9.478342] Freeing unused kernel memory: 776K (ffff88000153e000 - ffff880001600000)
451[ 9.487095] Freeing unused kernel memory: 120K (ffff8800017e2000 - ffff880001800000)
452[ 9.533515] systemd-udevd[67]: starting version 215
453[ 9.540297] random: systemd-udevd urandom read with 4 bits of entropy available
454[ 9.573416] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
455[ 9.583942] [drm] Initialized drm 1.1.0 20060810
456[ 9.590753] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
457[ 9.596752] r8169 0000:01:00.0: irq 74 for MSI/MSI-X
458[ 9.597209] r8169 0000:01:00.0 eth0: RTL8168dp/8111dp at 0xffffc90000002000, bc:5f:f4:bc:13:8f, XID 08b00000 IRQ 74
459[ 9.607681] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
460[ 9.607706] ACPI: Power Button [PWRB]
461[ 9.607907] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
462[ 9.607911] ACPI: Power Button [PWRF]
463[ 9.642583] SCSI subsystem initialized
464[ 9.647505] [drm] radeon kernel modesetting enabled.
465[ 9.653252] [drm] initializing kernel modesetting (KABINI 0x1002:0x9834 0x1002:0x9834).
466[ 9.661327] [drm] register mmio base: 0xF0B00000
467[ 9.666002] [drm] register mmio size: 262144
468[ 9.670875] [drm] doorbell mmio base: 0xF0000000
469[ 9.675534] [drm] doorbell mmio size: 8388608
470[ 9.680565] radeon 0000:00:01.0: Invalid ROM contents
471[ 9.685704] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
472[ 9.692174] radeon 0000:00:01.0: Fatal error during GPU init
473[ 9.698258] [drm] radeon: finishing device.
474[ 9.702478] [TTM] Memory type 2 has not been initialized
475[ 9.712294] ACPI: bus type USB registered
476[ 9.715982] radeon: probe of 0000:00:01.0 failed with error -22
477[ 9.722764] libata version 3.00 loaded.
478[ 9.724964] ahci 0000:00:11.0: version 3.0
479[ 9.725265] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
480[ 9.733383] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio
481[ 9.740514] usbcore: registered new interface driver usbfs
482[ 9.742053] scsi0 : ahci
483[ 9.748772] sdhci: Secure Digital Host Controller Interface driver
484[ 9.748859] scsi1 : ahci
485[ 9.749015] ata1: SATA max UDMA/133 abar m1024@0xf0b6b000 port 0xf0b6b100 irq 19
486[ 9.749020] ata2: SATA max UDMA/133 abar m1024@0xf0b6b000 port 0xf0b6b180 irq 19
487[ 9.749199] usbcore: registered new interface driver hub
488[ 9.749270] usbcore: registered new device driver usb
489[ 9.782639] sdhci: Copyright(c) Pierre Ossman
490[ 9.787924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
491[ 9.794828] ehci-pci: EHCI PCI platform driver
492[ 9.795062] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
493[ 9.807285] ehci-pci 0000:00:12.2: EHCI Host Controller
494[ 9.813431] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
495[ 9.821471] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
496[ 9.830201] ehci-pci 0000:00:12.2: debug port 1
497[ 9.835367] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0b6c000
498[ 9.851156] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
499[ 9.857917] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
500[ 9.864726] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
501[ 9.871962] usb usb1: Product: EHCI Host Controller
502[ 9.876848] usb usb1: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
503[ 9.883388] usb usb1: SerialNumber: 0000:00:12.2
504[ 9.889020] hub 1-0:1.0: USB hub found
505[ 9.893567] hub 1-0:1.0: 4 ports detected
506[ 9.899251] ehci-pci 0000:00:13.2: EHCI Host Controller
507[ 9.905039] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
508[ 9.907249] r8169 0000:01:00.0 eth0: rtl_ocp_read_cond == 0 (loop: 10, delay: 10).
509[ 9.907297] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
510[ 9.907629] r8169 0000:02:00.0: irq 75 for MSI/MSI-X
511[ 9.908110] r8169 0000:02:00.0 eth1: RTL8168evl/8111evl at 0xffffc90000e5a000, bc:5f:f4:bc:13:98, XID 0c900800 IRQ 75
512[ 9.908115] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
513[ 9.944776] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
514[ 9.953516] ehci-pci 0000:00:13.2: debug port 1
515[ 9.958157] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0b6d000
516[ 9.975288] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
517[ 9.983358] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
518[ 9.990170] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
519[ 9.997411] usb usb2: Product: EHCI Host Controller
520[ 10.002303] usb usb2: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
521[ 10.008849] usb usb2: SerialNumber: 0000:00:13.2
522[ 10.014769] hub 2-0:1.0: USB hub found
523[ 10.019141] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
524[ 10.027811] hub 2-0:1.0: 4 ports detected
525[ 10.032881] ehci-pci 0000:00:16.2: EHCI Host Controller
526[ 10.038551] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
527[ 10.046870] tsc: Refined TSC clocksource calibration: 998.191 MHz
528[ 10.053243] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
529[ 10.061985] ehci-pci 0000:00:16.2: debug port 1
530[ 10.067211] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0b6f000
531[ 10.083176] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
532[ 10.089082] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
533[ 10.095893] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
534[ 10.103133] usb usb3: Product: EHCI Host Controller
535[ 10.108021] usb usb3: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd
536[ 10.114556] usb usb3: SerialNumber: 0000:00:16.2
537[ 10.119574] hub 3-0:1.0: USB hub found
538[ 10.123193] ata2: SATA link down (SStatus 0 SControl 300)
539[ 10.123253] ata1: SATA link down (SStatus 0 SControl 300)
540[ 10.134206] hub 3-0:1.0: 2 ports detected
541[ 10.138626] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
542[ 10.146594] ohci-pci: OHCI PCI platform driver
543[ 10.147365] mmc0: no vqmmc regulator found
544[ 10.147367] mmc0: no vmmc regulator found
545[ 10.151102] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
546[ 10.165721] ohci-pci 0000:00:12.0: OHCI PCI host controller
547[ 10.171338] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
548[ 10.178842] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0b68000
549[ 10.227213] usb 1-4: new high-speed USB device number 2 using ehci-pci
550[ 10.243277] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
551[ 10.250072] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
552[ 10.257303] usb usb4: Product: OHCI PCI host controller
553[ 10.262538] usb usb4: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
554[ 10.269069] usb usb4: SerialNumber: 0000:00:12.0
555[ 10.274089] hub 4-0:1.0: USB hub found
556[ 10.277877] hub 4-0:1.0: 4 ports detected
557[ 10.282505] ohci-pci 0000:00:13.0: OHCI PCI host controller
558[ 10.288109] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
559[ 10.295552] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0b69000
560[ 10.359277] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
561[ 10.366081] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
562[ 10.373330] usb usb5: Product: OHCI PCI host controller
563[ 10.378579] usb usb5: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
564[ 10.379578] usb 1-4: New USB device found, idVendor=0457, idProduct=0151
565[ 10.379583] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=3
566[ 10.379587] usb 1-4: Product: USB Mass Storage Device
567[ 10.379590] usb 1-4: SerialNumber: 9875c6f37f77ae
568[ 10.408746] usb usb5: SerialNumber: 0000:00:13.0
569[ 10.413888] hub 5-0:1.0: USB hub found
570[ 10.414353] usb-storage 1-4:1.0: USB Mass Storage device detected
571[ 10.414510] usb-storage 1-4:1.0: Quirks match for vid 0457 pid 0151: 80
572[ 10.414570] scsi2 : usb-storage 1-4:1.0
573[ 10.414787] usbcore: registered new interface driver usb-storage
574[ 10.440340] hub 5-0:1.0: 4 ports detected
575[ 10.445030] ohci-pci 0000:00:16.0: OHCI PCI host controller
576[ 10.450628] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6
577[ 10.458088] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0b6a000
578[ 10.495253] usb 2-4: new high-speed USB device number 2 using ehci-pci
579[ 10.523301] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
580[ 10.530098] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
581[ 10.537324] usb usb6: Product: OHCI PCI host controller
582[ 10.542558] usb usb6: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd
583[ 10.549099] usb usb6: SerialNumber: 0000:00:16.0
584[ 10.554143] hub 6-0:1.0: USB hub found
585[ 10.557932] hub 6-0:1.0: 2 ports detected
586[ 10.587109] device-mapper: uevent: version 1.0.3
587[ 10.591935] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
588[ 11.051420] Switched to clocksource tsc
589[ 11.412763] scsi 2:0:0:0: Direct-Access JetFlash TS4GJF2A/120 0.00 PQ: 0 ANSI: 2
590[ 11.425989] sd 2:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB)
591[ 11.434489] sd 2:0:0:0: [sda] Write Protect is off
592[ 11.439308] sd 2:0:0:0: [sda] Mode Sense: 00 00 00 00
593[ 11.440732] sd 2:0:0:0: [sda] Asking for cache data failed
594[ 11.446237] sd 2:0:0:0: [sda] Assuming drive cache: write through
595[ 11.458005] sda: sda1
596[ 11.463860] sd 2:0:0:0: [sda] Attached SCSI removable disk
597[ 11.470789] sd 2:0:0:0: Attached scsi generic sg0 type 0
598[ 11.908786] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
599[ 12.995641] random: nonblocking pool is initialized
600[ 25.613378] usb 2-4: device descriptor read/64, error -110
601[ 27.370169] loop: module loaded
602[ 27.409211] loop0: unknown partition table
603[ 40.835511] usb 2-4: device descriptor read/64, error -110
604[ 41.055529] usb 2-4: new high-speed USB device number 3 using ehci-pci
605[ 56.173648] usb 2-4: device descriptor read/64, error -110
606[ 71.395807] usb 2-4: device descriptor read/64, error -110
607[ 71.615823] usb 2-4: new high-speed USB device number 4 using ehci-pci
608[ 82.029272] usb 2-4: device not accepting address 4, error -110
609[ 82.145302] usb 2-4: new high-speed USB device number 5 using ehci-pci
610[ 92.558760] usb 2-4: device not accepting address 5, error -110
611[ 92.564733] usb usb2-port4: unable to enumerate USB device
612[ 92.842825] usb 5-4: new full-speed USB device number 2 using ohci-pci
613[ 94.452781] FS-Cache: Loaded
614[ 94.474033] 9pnet: Installing 9P2000 support
615[ 94.491746] 9p: Installing v9fs 9p2000 file system support
616[ 94.497272] FS-Cache: Netfs '9p' registered for caching
617[ 99.144414] systemd-udevd[595]: starting version 215
618[ 99.702922] ACPI: acpi_idle registered with cpuidle
619[ 99.740830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
620[ 99.778559] acpi-cpufreq: overriding BIOS provided _PSD data
621[ 99.945367] ipmi message handler version 39.2
622[ 99.949907] snd_hda_intel 0000:00:01.1: irq 76 for MSI/MSI-X
623[ 99.950283] snd_hda_intel 0000:00:14.2: irq 77 for MSI/MSI-X
624[ 99.958280] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
625[ 99.970226] IPMI System Interface driver.
626[ 99.974373] ipmi_si 0000:01:00.3: probing via PCI
627[ 99.991951] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
628[ 100.050863] ipmi_si 0000:01:00.3: [io 0x1c00-0x1cff] regsize 1 spacing 1 irq 35
629[ 100.058305] ipmi_si: Adding PCI-specified kcs state machine
630[ 100.097790] EDAC MC: Ver: 3.0.0
631
632[ 100.102869] ipmi_si: Trying PCI-specified kcs state machine at i/o address 0x1c00, slave address 0x0, irq 35
633[ 100.128411] input: PC Speaker as /devices/platform/pcspkr/input/input5
634[ 100.181452] MCE: In-kernel MCE decoding enabled.
635[ 100.194995] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6
636[ 100.204706] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
637[ 100.259047] AMD64 EDAC driver v3.4.0
638[ 100.287974] EDAC amd64: DRAM ECC disabled.
639[ 100.292100] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable.
640[ 100.300201] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
641 Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
642 (Note that use of the override may cause unknown side effects.)
643[ 100.400737] sound hdaudioC1D0: ALC662 rev1: SKU not ready 0x411111f0
644[ 100.407278] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
645[ 100.415293] sound hdaudioC1D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
646[ 100.421941] sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
647[ 100.428067] sound hdaudioC1D0: mono: mono_out=0x0
648[ 100.433069] sound hdaudioC1D0: inputs:
649[ 100.447241] sound hdaudioC1D0: Mic=0x18
650[ 100.499181] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input8
651[ 100.530145] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
652[ 100.612159] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
653[ 100.699969] AVX version of gcm_enc/dec engaged.
654[ 100.719957] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
655[ 100.856782] alg: No test for crc32 (crc32-pclmul)
656[ 101.007509] kvm: Nested Virtualization enabled
657[ 101.033616] kvm: Nested Paging enabled
658[ 107.985000] usb 5-4: device descriptor read/64, error -110
659[ 123.231130] usb 5-4: device descriptor read/64, error -110
660[ 123.475140] usb 5-4: new full-speed USB device number 3 using ohci-pci
661[ 138.617292] usb 5-4: device descriptor read/64, error -110
662[ 150.762951] ipmi_si: There appears to be no BMC at this location
663[ 153.863457] usb 5-4: device descriptor read/64, error -110
664[ 154.107445] usb 5-4: new full-speed USB device number 4 using ohci-pci
665[ 164.520900] usb 5-4: device not accepting address 4, error -110
666[ 164.660930] usb 5-4: new full-speed USB device number 5 using ohci-pci
667[ 175.074389] usb 5-4: device not accepting address 5, error -110
668[ 175.080555] usb usb5-port4: unable to enumerate USB device
669[ 175.086228] usb 1-4: USB disconnect, device number 2
670[ 177.324727] r8169 0000:02:00.0 eth1: link down
671[ 177.329279] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
672[ 177.344016] r8169 0000:01:00.0 eth0: link down
673[ 177.351269] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
674[ 177.357179] r8169 0000:01:00.0 eth0: link down
675[ 177.510633] RPC: Registered named UNIX socket transport module.
676[ 177.516591] RPC: Registered udp transport module.
677[ 177.521308] RPC: Registered tcp transport module.
678[ 177.526020] RPC: Registered tcp NFSv4.1 backchannel transport module.
679[ 177.594482] FS-Cache: Netfs 'nfs' registered for caching
680[ 177.699411] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
681[ 180.210859] r8169 0000:01:00.0 eth0: link up
682[ 180.215189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
683[ 183.844523] fuse init (API version 7.23)