| [ 0.000000] Initializing cgroup subsys cpuset |
| [ 0.000000] Initializing cgroup subsys cpu |
| [ 0.000000] Initializing cgroup subsys cpuacct |
| [ 0.000000] Linux version 3.16.0-1-grml-amd64 (team@grml.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-1+grml.1 (2014-11-05) |
| [ 0.000000] Command line: initrd=/boot/grml64small/initrd.img apm=power-off vga=791 nomce live-media-path=/live/grml64-small/ boot=live bootid=grml64small201411 ssh=remote verbose console=ttyS0,115200n8 toram=grml64-small.squashfs BOOT_IMAGE=/boot/grml64small/vmlinuz |
| [ 0.000000] e820: BIOS-provided physical RAM map: |
| [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable |
| [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9bfff] usable |
| [ 0.000000] BIOS-e820: [mem 0x00000000bff9c000-0x00000000dfffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved |
| [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fffffff] usable |
| [ 0.000000] NX (Execute Disable) protection: active |
| [ 0.000000] SMBIOS 2.7 present. |
| [ 0.000000] DMI: ASROCK IMB-A180/IMB-A180, BIOS 4.6-812-g4a1d450 07/22/2017 |
| [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved |
| [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] e820: last_pfn = 0x220000 max_arch_pfn = 0x400000000 |
| [ 0.000000] MTRR default type: uncachable |
| [ 0.000000] MTRR fixed ranges enabled: |
| [ 0.000000] 00000-9FFFF write-back |
| [ 0.000000] A0000-BFFFF uncachable |
| [ 0.000000] C0000-FFFFF write-back |
| [ 0.000000] MTRR variable ranges enabled: |
| [ 0.000000] 0 base 0000000000 mask FF80000000 write-back |
| [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back |
| [ 0.000000] 2 disabled |
| [ 0.000000] 3 disabled |
| [ 0.000000] 4 disabled |
| [ 0.000000] 5 disabled |
| [ 0.000000] 6 base 00FF800000 mask FFFF800000 write-protect |
| [ 0.000000] 7 disabled |
| [ 0.000000] TOM2: 0000000220000000 aka 8704M |
| [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| [ 0.000000] e820: last_pfn = 0xbff9c max_arch_pfn = 0x400000000 |
| [ 0.000000] found SMP MP-table at [mem 0x000f0700-0x000f070f] mapped at [ffff8800000f0700] |
| [ 0.000000] Scanning 1 areas for low memory corruption |
| [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 |
| [ 0.000000] Using GB pages for direct mapping |
| [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] |
| [ 0.000000] [mem 0x00000000-0x000fffff] page 4k |
| [ 0.000000] BRK [0x01af8000, 0x01af8fff] PGTABLE |
| [ 0.000000] BRK [0x01af9000, 0x01af9fff] PGTABLE |
| [ 0.000000] BRK [0x01afa000, 0x01afafff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x21fe00000-0x21fffffff] |
| [ 0.000000] [mem 0x21fe00000-0x21fffffff] page 2M |
| [ 0.000000] BRK [0x01afb000, 0x01afbfff] PGTABLE |
| [ 0.000000] init_memory_mapping: [mem 0x21c000000-0x21fdfffff] |
| [ 0.000000] [mem 0x21c000000-0x21fdfffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x200000000-0x21bffffff] |
| [ 0.000000] [mem 0x200000000-0x21bffffff] page 2M |
| [ 0.000000] init_memory_mapping: [mem 0x00100000-0xbff9bfff] |
| [ 0.000000] [mem 0x00100000-0x001fffff] page 4k |
| [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M |
| [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G |
| [ 0.000000] [mem 0x80000000-0xbfdfffff] page 2M |
| [ 0.000000] [mem 0xbfe00000-0xbff9bfff] page 4k |
| [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff] |
| [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G |
| [ 0.000000] RAMDISK: [mem 0x7e84b000-0x7fffefff] |
| [ 0.000000] ACPI: Early table checksum verification disabled |
| [ 0.000000] ACPI: RSDP 0x00000000000F08B0 000024 (v02 CORE ) |
| [ 0.000000] ACPI: XSDT 0x00000000BFFAF0E0 000064 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: FACP 0x00000000BFFB0910 0000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: DSDT 0x00000000BFFAF280 001684 (v02 AMD COREBOOT 00010001 INTL 20161222) |
| [ 0.000000] ACPI: FACS 0x00000000BFFAF240 000040 |
| [ 0.000000] ACPI: SSDT 0x00000000BFFB0A10 00008A (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| [ 0.000000] ACPI: TCPA 0x00000000BFFB0AA0 000032 (v02 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: APIC 0x00000000BFFB0AE0 00006E (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: HEST 0x00000000BFFB0B50 0001D0 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: SSDT 0x00000000BFFB0D20 0046D1 (v02 AMD AGESA 00000002 MSFT 04000000) |
| [ 0.000000] ACPI: SSDT 0x00000000BFFB5400 00043C (v01 AMD AGESA 00000001 AMD 00000001) |
| [ 0.000000] ACPI: HPET 0x00000000BFFB5840 000038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] No NUMA configuration found |
| [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fffffff] |
| [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21fffffff] |
| [ 0.000000] NODE_DATA [mem 0x21fff9000-0x21fffdfff] |
| [ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880217e00000-ffff88021e7fffff] on node 0 |
| [ 0.000000] Zone ranges: |
| [ 0.000000] DMA [mem 0x00001000-0x00ffffff] |
| [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] |
| [ 0.000000] Normal [mem 0x100000000-0x21fffffff] |
| [ 0.000000] Movable zone start for each node |
| [ 0.000000] Early memory node ranges |
| [ 0.000000] node 0: [mem 0x00001000-0x0009efff] |
| [ 0.000000] node 0: [mem 0x00100000-0xbff9bfff] |
| [ 0.000000] node 0: [mem 0x100000000-0x21fffffff] |
| [ 0.000000] On node 0 totalpages: 1965882 |
| [ 0.000000] DMA zone: 56 pages used for memmap |
| [ 0.000000] DMA zone: 21 pages reserved |
| [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 |
| [ 0.000000] DMA32 zone: 10695 pages used for memmap |
| [ 0.000000] DMA32 zone: 782236 pages, LIFO batch:31 |
| [ 0.000000] Normal zone: 16128 pages used for memmap |
| [ 0.000000] Normal zone: 1179648 pages, LIFO batch:31 |
| [ 0.000000] ACPI: PM-Timer IO Port: 0x818 |
| [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) |
| [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) |
| [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) |
| [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 |
| [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec20000] gsi_base[24]) |
| [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec20000, GSI 24-55 |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) |
| [ 0.000000] ACPI: IRQ0 used by override. |
| [ 0.000000] ACPI: IRQ2 used by override. |
| [ 0.000000] ACPI: IRQ9 used by override. |
| [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 |
| [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs |
| [ 0.000000] nr_irqs_gsi: 72 |
| [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xbff9c000-0xdfffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] |
| [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xffffffff] |
| [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices |
| [ 0.000000] Booting paravirtualized kernel on bare hardware |
| [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 |
| [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021fc00000 s85824 r8192 d20672 u1048576 |
| [ 0.000000] pcpu-alloc: s85824 r8192 d20672 u1048576 alloc=1*2097152 |
| [ 0.000000] pcpu-alloc: [0] 0 1 |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1938982 |
| [ 0.000000] Policy zone: Normal |
| [ 0.000000] Kernel command line: initrd=/boot/grml64small/initrd.img apm=power-off vga=791 nomce live-media-path=/live/grml64-small/ boot=live bootid=grml64small201411 ssh=remote verbose console=ttyS0,115200n8 toram=grml64-small.squashfs BOOT_IMAGE=/boot/grml64small/vmlinuz |
| [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 |
| [ 0.000000] AGP: Checking aperture... |
| [ 0.000000] AGP: No AGP bridge found |
| [ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB) |
| [ 0.000000] AGP: Your BIOS doesn't leave a aperture memory hole |
| [ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup |
| [ 0.000000] AGP: This costs you 64MB of RAM |
| [ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB) |
| [ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff] |
| [ 0.000000] Memory: 7587280K/7863528K available (5357K kernel code, 947K rwdata, 1928K rodata, 1220K init, 840K bss, 276248K reserved) |
| [ 0.000000] Hierarchical RCU implementation. |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2. |
| [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 |
| [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 |
| [ 0.000000] Console: colour dummy device 80x25 |
| [ 0.000000] console [ttyS0] enabled |
| [ 0.000000] hpet clockevent registered |
| [ 0.000000] tsc: Fast TSC calibration using PIT |
| [ 0.000000] tsc: Detected 998.278 MHz processor |
| [ 0.000077] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.55 BogoMIPS (lpj=3993112) |
| [ 0.010724] pid_max: default: 32768 minimum: 301 |
| [ 0.015377] ACPI: Core revision 20140424 |
| [ 0.038324] ACPI: All ACPI Tables successfully acquired |
| [ 0.043689] Security Framework initialized |
| [ 0.047814] AppArmor: AppArmor disabled by boot time parameter |
| [ 0.053655] Yama: disabled by default; enable with sysctl kernel.yama.* |
| [ 0.061807] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) |
| [ 0.074965] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| [ 0.085021] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.091939] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) |
| [ 0.099990] Initializing cgroup subsys memory |
| [ 0.104382] Initializing cgroup subsys devices |
| [ 0.108858] Initializing cgroup subsys freezer |
| [ 0.113322] Initializing cgroup subsys net_cls |
| [ 0.117795] Initializing cgroup subsys blkio |
| [ 0.122090] Initializing cgroup subsys perf_event |
| [ 0.126807] Initializing cgroup subsys net_prio |
| [ 0.131417] tseg: 0000000000 |
| [ 0.131431] CPU: Physical Processor ID: 0 |
| [ 0.135455] CPU: Processor Core ID: 0 |
| [ 0.139135] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 |
| Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 |
| tlb_flushall_shift: 6 |
| [ 0.154577] Freeing SMP alternatives memory: 20K (ffffffff81a1f000 - ffffffff81a24000) |
| [ 0.165223] ftrace: allocating 22111 entries in 87 pages |
| [ 0.193274] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 |
| [ 0.238819] smpboot: CPU0: AMD E1-2100 APU with Radeon(TM) HD Graphics (fam: 16, model: 00, stepping: 01) |
| [ 0.352764] Performance Events: AMD PMU driver. |
| [ 0.357334] ... version: 0 |
| [ 0.361349] ... bit width: 48 |
| [ 0.365450] ... generic registers: 4 |
| [ 0.369464] ... value mask: 0000ffffffffffff |
| [ 0.374777] ... max period: 00007fffffffffff |
| [ 0.380089] ... fixed-purpose events: 0 |
| [ 0.384102] ... event mask: 000000000000000f |
| [ 0.393940] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. |
| [ 0.402297] x86: Booting SMP configuration: |
| [ 0.406489] .... node #0, CPUs: #1 |
| [ 0.423431] x86: Booted up 1 node, 2 CPUs |
| [ 0.427657] smpboot: Total of 2 processors activated (3993.11 BogoMIPS) |
| [ 0.435149] devtmpfs: initialized |
| [ 0.453878] pinctrl core: initialized pinctrl subsystem |
| [ 0.459359] NET: Registered protocol family 16 |
| [ 0.464273] cpuidle: using governor ladder |
| [ 0.468381] cpuidle: using governor menu |
| [ 0.472508] ACPI: bus type PCI registered |
| [ 0.476525] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| [ 0.483221] PCI: Using configuration type 1 for base access |
| [ 0.488797] PCI: Using configuration type 1 for extended access |
| [ 0.510068] ACPI: Added _OSI(Module Device) |
| [ 0.514269] ACPI: Added _OSI(Processor Device) |
| [ 0.518716] ACPI: Added _OSI(3.0 _SCP Extensions) |
| [ 0.523424] ACPI: Added _OSI(Processor Aggregator Device) |
| [ 0.532295] ACPI: Executed 2 blocks of module-level executable AML code |
| [ 0.548922] ACPI: Interpreter enabled |
| [ 0.552640] ACPI: (supports S0 S1 S2 S3 S4 S5) |
| [ 0.557093] ACPI: Using IOAPIC for interrupt routing |
| [ 0.562111] HEST: Table parsing has been initialized. |
| [ 0.567177] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| [ 0.584491] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| [ 0.590692] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] |
| [ 0.599129] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] |
| [ 0.607374] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7]; [io 0x0000-0x0cf7] ignored |
| [ 0.617641] PCI host bridge to bus 0000:00 |
| [ 0.621750] pci_bus 0000:00: root bus resource [bus 00-ff] |
| [ 0.627242] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] |
| [ 0.633430] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] |
| [ 0.639620] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] |
| [ 0.646501] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] |
| [ 0.653383] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] |
| [ 0.660281] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000 |
| [ 0.660546] pci 0000:00:01.0: [1002:9834] type 00 class 0x030000 |
| [ 0.660575] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref] |
| [ 0.660593] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref] |
| [ 0.660607] pci 0000:00:01.0: reg 0x20: [io 0x3000-0x30ff] |
| [ 0.660621] pci 0000:00:01.0: reg 0x24: [mem 0xf0b00000-0xf0b3ffff] |
| [ 0.660634] pci 0000:00:01.0: reg 0x30: [mem 0xf0b40000-0xf0b5ffff pref] |
| [ 0.660698] pci 0000:00:01.0: supports D1 D2 |
| [ 0.660705] pci 0000:00:01.0: PME# supported from D1 D2 D3hot |
| [ 0.660945] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 |
| [ 0.660971] pci 0000:00:01.1: reg 0x10: [mem 0xf0b60000-0xf0b63fff 64bit] |
| [ 0.661066] pci 0000:00:01.1: supports D1 D2 |
| [ 0.661267] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000 |
| [ 0.661511] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400 |
| [ 0.661620] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold |
| [ 0.661735] pci 0000:00:02.3: System wakeup disabled by ACPI |
| [ 0.667537] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400 |
| [ 0.667645] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold |
| [ 0.667760] pci 0000:00:02.4: System wakeup disabled by ACPI |
| [ 0.673581] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 |
| [ 0.673609] pci 0000:00:11.0: reg 0x10: [io 0x3410-0x3417] |
| [ 0.673623] pci 0000:00:11.0: reg 0x14: [io 0x3420-0x3423] |
| [ 0.673638] pci 0000:00:11.0: reg 0x18: [io 0x3418-0x341f] |
| [ 0.673652] pci 0000:00:11.0: reg 0x1c: [io 0x3424-0x3427] |
| [ 0.673666] pci 0000:00:11.0: reg 0x20: [io 0x3400-0x340f] |
| [ 0.673680] pci 0000:00:11.0: reg 0x24: [mem 0xf0b6b000-0xf0b6b3ff] |
| [ 0.673735] pci 0000:00:11.0: PME# supported from D3hot |
| [ 0.673962] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 |
| [ 0.673989] pci 0000:00:12.0: reg 0x10: [mem 0xf0b68000-0xf0b68fff] |
| [ 0.674182] pci 0000:00:12.0: System wakeup disabled by ACPI |
| [ 0.679985] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 |
| [ 0.680014] pci 0000:00:12.2: reg 0x10: [mem 0xf0b6c000-0xf0b6c0ff] |
| [ 0.680117] pci 0000:00:12.2: supports D1 D2 |
| [ 0.680123] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.680231] pci 0000:00:12.2: System wakeup disabled by ACPI |
| [ 0.686038] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 |
| [ 0.686064] pci 0000:00:13.0: reg 0x10: [mem 0xf0b69000-0xf0b69fff] |
| [ 0.686258] pci 0000:00:13.0: System wakeup disabled by ACPI |
| [ 0.692066] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 |
| [ 0.692094] pci 0000:00:13.2: reg 0x10: [mem 0xf0b6d000-0xf0b6d0ff] |
| [ 0.692197] pci 0000:00:13.2: supports D1 D2 |
| [ 0.692203] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.692312] pci 0000:00:13.2: System wakeup disabled by ACPI |
| [ 0.698120] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 |
| [ 0.698396] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 |
| [ 0.698427] pci 0000:00:14.2: reg 0x10: [mem 0xf0b64000-0xf0b67fff 64bit] |
| [ 0.698515] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold |
| [ 0.698737] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 |
| [ 0.699010] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501 |
| [ 0.699036] pci 0000:00:14.7: reg 0x10: [mem 0xf0b6e000-0xf0b6e0ff 64bit] |
| [ 0.699290] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310 |
| [ 0.699317] pci 0000:00:16.0: reg 0x10: [mem 0xf0b6a000-0xf0b6afff] |
| [ 0.699510] pci 0000:00:16.0: System wakeup disabled by ACPI |
| [ 0.705315] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320 |
| [ 0.705344] pci 0000:00:16.2: reg 0x10: [mem 0xf0b6f000-0xf0b6f0ff] |
| [ 0.705446] pci 0000:00:16.2: supports D1 D2 |
| [ 0.705452] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.705561] pci 0000:00:16.2: System wakeup disabled by ACPI |
| [ 0.711361] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000 |
| [ 0.711579] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000 |
| [ 0.711791] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000 |
| [ 0.712005] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000 |
| [ 0.712228] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000 |
| [ 0.712438] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000 |
| [ 0.712819] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.712848] pci 0000:01:00.0: reg 0x10: [io 0x1000-0x10ff] |
| [ 0.712883] pci 0000:01:00.0: reg 0x18: [mem 0xf090c000-0xf090cfff 64bit] |
| [ 0.712908] pci 0000:01:00.0: reg 0x20: [mem 0xf0800000-0xf0803fff 64bit pref] |
| [ 0.713022] pci 0000:01:00.0: supports D1 D2 |
| [ 0.713028] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.713214] pci 0000:01:00.1: [10ec:816a] type 00 class 0x070002 |
| [ 0.713242] pci 0000:01:00.1: reg 0x10: [io 0x1400-0x14ff] |
| [ 0.713278] pci 0000:01:00.1: reg 0x18: [mem 0xf090d000-0xf090dfff 64bit] |
| [ 0.713302] pci 0000:01:00.1: reg 0x20: [mem 0xf0900000-0xf0903fff 64bit] |
| [ 0.713399] pci 0000:01:00.1: supports D1 D2 |
| [ 0.713405] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.713575] pci 0000:01:00.2: [10ec:816b] type 00 class 0x070002 |
| [ 0.713603] pci 0000:01:00.2: reg 0x10: [io 0x1800-0x18ff] |
| [ 0.713638] pci 0000:01:00.2: reg 0x18: [mem 0xf090e000-0xf090efff 64bit] |
| [ 0.713662] pci 0000:01:00.2: reg 0x20: [mem 0xf0904000-0xf0907fff 64bit] |
| [ 0.713759] pci 0000:01:00.2: supports D1 D2 |
| [ 0.713765] pci 0000:01:00.2: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.713936] pci 0000:01:00.3: [10ec:816c] type 00 class 0x0c0701 |
| [ 0.713963] pci 0000:01:00.3: reg 0x10: [io 0x1c00-0x1cff] |
| [ 0.713999] pci 0000:01:00.3: reg 0x18: [mem 0xf090f000-0xf090f0ff 64bit] |
| [ 0.714023] pci 0000:01:00.3: reg 0x20: [mem 0xf0908000-0xf090bfff 64bit] |
| [ 0.714119] pci 0000:01:00.3: supports D1 D2 |
| [ 0.714125] pci 0000:01:00.3: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.720812] pci 0000:00:02.3: PCI bridge to [bus 01] |
| [ 0.725795] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff] |
| [ 0.725804] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff] |
| [ 0.725815] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref] |
| [ 0.725967] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 |
| [ 0.725995] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] |
| [ 0.726030] pci 0000:02:00.0: reg 0x18: [mem 0xf0a04000-0xf0a04fff 64bit pref] |
| [ 0.726054] pci 0000:02:00.0: reg 0x20: [mem 0xf0a00000-0xf0a03fff 64bit pref] |
| [ 0.726166] pci 0000:02:00.0: supports D1 D2 |
| [ 0.726172] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold |
| [ 0.732794] pci 0000:00:02.4: PCI bridge to [bus 02] |
| [ 0.737772] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff] |
| [ 0.737785] pci 0000:00:02.4: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref] |
| [ 0.738352] ACPI: PCI Interrupt Link [INTA] (IRQs *3 4 5 7 10 11 12 15) |
| [ 0.745293] ACPI: PCI Interrupt Link [INTB] (IRQs 3 *4 5 7 10 11 12 15) |
| [ 0.752224] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 *5 7 10 11 12 15) |
| [ 0.759157] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 *7 10 11 12 15) |
| [ 0.766101] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 *11 12 15) |
| [ 0.773040] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *10 |
| [ 0.778563] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.785689] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0 |
| [ 0.792972] ACPI: Enabled 5 GPEs in block 00 to 1F |
| [ 0.798164] vgaarb: setting as boot device: PCI:0000:00:01.0 |
| [ 0.803824] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none |
| [ 0.811929] vgaarb: loaded |
| [ 0.814646] vgaarb: bridge control possible 0000:00:01.0 |
| [ 0.820150] PCI: Using ACPI for IRQ routing |
| [ 0.824341] PCI: pci_cache_line_size set to 64 bytes |
| [ 0.824441] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] |
| [ 0.824447] e820: reserve RAM buffer [mem 0xbff9c000-0xbfffffff] |
| [ 0.824941] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 |
| [ 0.829898] hpet0: 3 comparators, 32-bit 14.318180 MHz counter |
| [ 0.837820] Switched to clocksource hpet |
| [ 0.858715] pnp: PnP ACPI init |
| [ 0.861841] ACPI: bus type PNP registered |
| [ 0.866291] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved |
| [ 0.872936] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) |
| [ 0.873062] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) |
| [ 0.873442] pnp: PnP ACPI: found 2 devices |
| [ 0.877547] ACPI: bus type PNP unregistered |
| [ 0.893384] pci 0000:00:02.3: PCI bridge to [bus 01] |
| [ 0.898364] pci 0000:00:02.3: bridge window [io 0x1000-0x1fff] |
| [ 0.904472] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff] |
| [ 0.911267] pci 0000:00:02.3: bridge window [mem 0xf0800000-0xf08fffff 64bit pref] |
| [ 0.919019] pci 0000:00:02.4: PCI bridge to [bus 02] |
| [ 0.924000] pci 0000:00:02.4: bridge window [io 0x2000-0x2fff] |
| [ 0.930105] pci 0000:00:02.4: bridge window [mem 0xf0a00000-0xf0afffff 64bit pref] |
| [ 0.937864] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| [ 0.937871] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| [ 0.937877] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| [ 0.937883] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] |
| [ 0.937890] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xffffffff] |
| [ 0.937896] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] |
| [ 0.937902] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff] |
| [ 0.937908] pci_bus 0000:01: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref] |
| [ 0.937915] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] |
| [ 0.937921] pci_bus 0000:02: resource 2 [mem 0xf0a00000-0xf0afffff 64bit pref] |
| [ 0.938041] NET: Registered protocol family 2 |
| [ 0.943099] TCP established hash table entries: 65536 (order: 7, 524288 bytes) |
| [ 0.950862] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| [ 0.958024] TCP: Hash tables configured (established 65536 bind 65536) |
| [ 0.964665] TCP: reno registered |
| [ 0.967945] UDP hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.974149] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) |
| [ 0.980953] NET: Registered protocol family 1 |
| [ 0.985372] pci 0000:00:01.0: Video device with shadowed ROM |
| [ 0.988110] PCI: CLS 64 bytes, default 64 |
| [ 0.988263] Unpacking initramfs... |
| [ 8.999156] Freeing initrd memory: 24272K (ffff88007e84b000 - ffff88007ffff000) |
| [ 9.006502] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| [ 9.012957] software IO TLB [mem 0xbbf9c000-0xbff9c000] (64MB) mapped at [ffff8800bbf9c000-ffff8800bff9bfff] |
| [ 9.023185] perf: AMD NB counters detected |
| [ 9.027298] perf: AMD L2I counters detected |
| [ 9.031626] microcode: CPU0: patch_level=0x0700010b |
| [ 9.036531] microcode: CPU1: patch_level=0x0700010b |
| [ 9.041573] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba |
| [ 9.050378] LVT offset 0 assigned for vector 0x400 |
| [ 9.055191] perf: AMD IBS detected (0x000000ff) |
| [ 9.059803] Scanning for low memory corruption every 60 seconds |
| [ 9.066544] futex hash table entries: 512 (order: 3, 32768 bytes) |
| [ 9.072729] audit: initializing netlink subsys (disabled) |
| [ 9.078181] audit: type=2000 audit(1500689200.836:1): initialized |
| [ 9.085325] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| [ 9.091777] zbud: loaded |
| [ 9.094768] VFS: Disk quotas dquot_6.5.2 |
| [ 9.098744] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| [ 9.105286] squashfs: version 4.0 (2009/01/31) Phillip Lougher |
| [ 9.111311] aufs 3.16-20140908 |
| [ 9.114381] msgmni has been set to 14866 |
| [ 9.119244] alg: No test for stdrng (krng) |
| [ 9.123435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) |
| [ 9.130970] io scheduler noop registered |
| [ 9.134910] io scheduler deadline registered |
| [ 9.139297] io scheduler cfq registered (default) |
| [ 9.144249] pcieport 0000:00:02.3: device [1022:1439] has invalid IRQ; check vendor BIOS |
| [ 9.152591] pcieport 0000:00:02.3: irq 72 for MSI/MSI-X |
| [ 9.152738] pcieport 0000:00:02.4: device [1022:1439] has invalid IRQ; check vendor BIOS |
| [ 9.161001] pcieport 0000:00:02.4: irq 73 for MSI/MSI-X |
| [ 9.161240] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt |
| [ 9.168214] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt |
| [ 9.174745] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt |
| [ 9.181283] pci 0000:01:00.2: Signaling PME through PCIe PME interrupt |
| [ 9.187821] pci 0000:01:00.3: Signaling PME through PCIe PME interrupt |
| [ 9.194361] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded |
| [ 9.194412] pcieport 0000:00:02.4: Signaling PME through PCIe PME interrupt |
| [ 9.201390] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| [ 9.207923] pcie_pme 0000:00:02.4:pcie01: service driver pcie_pme loaded |
| [ 9.207983] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| [ 9.213619] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| [ 9.220507] GHES: Failed to enable APEI firmware first mode. |
| [ 9.226410] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| [ 9.253160] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 9.281406] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 9.309641] serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A |
| [ 9.337888] serial8250: ttyS3 at I/O 0x2e8 (irq = 3, base_baud = 115200) is a 16550A |
| [ 9.346530] Linux agpgart interface v0.103 |
| [ 9.350912] i8042: PNP: No PS/2 controller found. Probing ports directly. |
| [ 9.362452] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| [ 9.367444] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| [ 9.372862] mousedev: PS/2 mouse device common for all mice |
| [ 9.378579] rtc_cmos 00:01: RTC can wake from S4 |
| [ 9.383454] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 |
| [ 9.389598] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs |
| [ 9.396692] ledtrig-cpu: registered to indicate activity on CPUs |
| [ 9.402927] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com> |
| [ 9.409378] AMD IOMMUv2 functionality not available on this system |
| [ 9.415841] TCP: cubic registered |
| [ 9.419253] NET: Registered protocol family 10 |
| [ 9.424285] mip6: Mobile IPv6 |
| [ 9.427285] NET: Registered protocol family 17 |
| [ 9.431767] mpls_gso: MPLS GSO support |
| [ 9.435538] mce: Unable to init device /dev/mcelog (rc: -5) |
| [ 9.441695] registered taskstats version 1 |
| [ 9.446858] rtc_cmos 00:01: setting system clock to 2017-07-22 02:06:42 UTC (1500689202) |
| [ 9.455124] PM: Hibernation image not present or could not be loaded. |
| [ 9.458306] Freeing unused kernel memory: 1220K (ffffffff818ee000 - ffffffff81a1f000) |
| [ 9.466164] Write protecting the kernel read-only data: 8192k |
| [ 9.478342] Freeing unused kernel memory: 776K (ffff88000153e000 - ffff880001600000) |
| [ 9.487095] Freeing unused kernel memory: 120K (ffff8800017e2000 - ffff880001800000) |
| [ 9.533515] systemd-udevd[67]: starting version 215 |
| [ 9.540297] random: systemd-udevd urandom read with 4 bits of entropy available |
| [ 9.573416] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 |
| [ 9.583942] [drm] Initialized drm 1.1.0 20060810 |
| [ 9.590753] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 9.596752] r8169 0000:01:00.0: irq 74 for MSI/MSI-X |
| [ 9.597209] r8169 0000:01:00.0 eth0: RTL8168dp/8111dp at 0xffffc90000002000, bc:5f:f4:bc:13:8f, XID 08b00000 IRQ 74 |
| [ 9.607681] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 9.607706] ACPI: Power Button [PWRB] |
| [ 9.607907] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
| [ 9.607911] ACPI: Power Button [PWRF] |
| [ 9.642583] SCSI subsystem initialized |
| [ 9.647505] [drm] radeon kernel modesetting enabled. |
| [ 9.653252] [drm] initializing kernel modesetting (KABINI 0x1002:0x9834 0x1002:0x9834). |
| [ 9.661327] [drm] register mmio base: 0xF0B00000 |
| [ 9.666002] [drm] register mmio size: 262144 |
| [ 9.670875] [drm] doorbell mmio base: 0xF0000000 |
| [ 9.675534] [drm] doorbell mmio size: 8388608 |
| [ 9.680565] radeon 0000:00:01.0: Invalid ROM contents |
| [ 9.685704] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM |
| [ 9.692174] radeon 0000:00:01.0: Fatal error during GPU init |
| [ 9.698258] [drm] radeon: finishing device. |
| [ 9.702478] [TTM] Memory type 2 has not been initialized |
| [ 9.712294] ACPI: bus type USB registered |
| [ 9.715982] radeon: probe of 0000:00:01.0 failed with error -22 |
| [ 9.722764] libata version 3.00 loaded. |
| [ 9.724964] ahci 0000:00:11.0: version 3.0 |
| [ 9.725265] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode |
| [ 9.733383] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio |
| [ 9.740514] usbcore: registered new interface driver usbfs |
| [ 9.742053] scsi0 : ahci |
| [ 9.748772] sdhci: Secure Digital Host Controller Interface driver |
| [ 9.748859] scsi1 : ahci |
| [ 9.749015] ata1: SATA max UDMA/133 abar m1024@0xf0b6b000 port 0xf0b6b100 irq 19 |
| [ 9.749020] ata2: SATA max UDMA/133 abar m1024@0xf0b6b000 port 0xf0b6b180 irq 19 |
| [ 9.749199] usbcore: registered new interface driver hub |
| [ 9.749270] usbcore: registered new device driver usb |
| [ 9.782639] sdhci: Copyright(c) Pierre Ossman |
| [ 9.787924] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| [ 9.794828] ehci-pci: EHCI PCI platform driver |
| [ 9.795062] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| [ 9.807285] ehci-pci 0000:00:12.2: EHCI Host Controller |
| [ 9.813431] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 |
| [ 9.821471] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 9.830201] ehci-pci 0000:00:12.2: debug port 1 |
| [ 9.835367] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0b6c000 |
| [ 9.851156] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 |
| [ 9.857917] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 9.864726] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 9.871962] usb usb1: Product: EHCI Host Controller |
| [ 9.876848] usb usb1: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd |
| [ 9.883388] usb usb1: SerialNumber: 0000:00:12.2 |
| [ 9.889020] hub 1-0:1.0: USB hub found |
| [ 9.893567] hub 1-0:1.0: 4 ports detected |
| [ 9.899251] ehci-pci 0000:00:13.2: EHCI Host Controller |
| [ 9.905039] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 |
| [ 9.907249] r8169 0000:01:00.0 eth0: rtl_ocp_read_cond == 0 (loop: 10, delay: 10). |
| [ 9.907297] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded |
| [ 9.907629] r8169 0000:02:00.0: irq 75 for MSI/MSI-X |
| [ 9.908110] r8169 0000:02:00.0 eth1: RTL8168evl/8111evl at 0xffffc90000e5a000, bc:5f:f4:bc:13:98, XID 0c900800 IRQ 75 |
| [ 9.908115] r8169 0000:02:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko] |
| [ 9.944776] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 9.953516] ehci-pci 0000:00:13.2: debug port 1 |
| [ 9.958157] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0b6d000 |
| [ 9.975288] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 |
| [ 9.983358] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 9.990170] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 9.997411] usb usb2: Product: EHCI Host Controller |
| [ 10.002303] usb usb2: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd |
| [ 10.008849] usb usb2: SerialNumber: 0000:00:13.2 |
| [ 10.014769] hub 2-0:1.0: USB hub found |
| [ 10.019141] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| [ 10.027811] hub 2-0:1.0: 4 ports detected |
| [ 10.032881] ehci-pci 0000:00:16.2: EHCI Host Controller |
| [ 10.038551] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 |
| [ 10.046870] tsc: Refined TSC clocksource calibration: 998.191 MHz |
| [ 10.053243] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround |
| [ 10.061985] ehci-pci 0000:00:16.2: debug port 1 |
| [ 10.067211] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0b6f000 |
| [ 10.083176] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 |
| [ 10.089082] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 |
| [ 10.095893] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 10.103133] usb usb3: Product: EHCI Host Controller |
| [ 10.108021] usb usb3: Manufacturer: Linux 3.16.0-1-grml-amd64 ehci_hcd |
| [ 10.114556] usb usb3: SerialNumber: 0000:00:16.2 |
| [ 10.119574] hub 3-0:1.0: USB hub found |
| [ 10.123193] ata2: SATA link down (SStatus 0 SControl 300) |
| [ 10.123253] ata1: SATA link down (SStatus 0 SControl 300) |
| [ 10.134206] hub 3-0:1.0: 2 ports detected |
| [ 10.138626] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1) |
| [ 10.146594] ohci-pci: OHCI PCI platform driver |
| [ 10.147365] mmc0: no vqmmc regulator found |
| [ 10.147367] mmc0: no vmmc regulator found |
| [ 10.151102] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA |
| [ 10.165721] ohci-pci 0000:00:12.0: OHCI PCI host controller |
| [ 10.171338] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 |
| [ 10.178842] ohci-pci 0000:00:12.0: irq 18, io mem 0xf0b68000 |
| [ 10.227213] usb 1-4: new high-speed USB device number 2 using ehci-pci |
| [ 10.243277] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 10.250072] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 10.257303] usb usb4: Product: OHCI PCI host controller |
| [ 10.262538] usb usb4: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd |
| [ 10.269069] usb usb4: SerialNumber: 0000:00:12.0 |
| [ 10.274089] hub 4-0:1.0: USB hub found |
| [ 10.277877] hub 4-0:1.0: 4 ports detected |
| [ 10.282505] ohci-pci 0000:00:13.0: OHCI PCI host controller |
| [ 10.288109] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 |
| [ 10.295552] ohci-pci 0000:00:13.0: irq 18, io mem 0xf0b69000 |
| [ 10.359277] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 10.366081] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 10.373330] usb usb5: Product: OHCI PCI host controller |
| [ 10.378579] usb usb5: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd |
| [ 10.379578] usb 1-4: New USB device found, idVendor=0457, idProduct=0151 |
| [ 10.379583] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=3 |
| [ 10.379587] usb 1-4: Product: USB Mass Storage Device |
| [ 10.379590] usb 1-4: SerialNumber: 9875c6f37f77ae |
| [ 10.408746] usb usb5: SerialNumber: 0000:00:13.0 |
| [ 10.413888] hub 5-0:1.0: USB hub found |
| [ 10.414353] usb-storage 1-4:1.0: USB Mass Storage device detected |
| [ 10.414510] usb-storage 1-4:1.0: Quirks match for vid 0457 pid 0151: 80 |
| [ 10.414570] scsi2 : usb-storage 1-4:1.0 |
| [ 10.414787] usbcore: registered new interface driver usb-storage |
| [ 10.440340] hub 5-0:1.0: 4 ports detected |
| [ 10.445030] ohci-pci 0000:00:16.0: OHCI PCI host controller |
| [ 10.450628] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6 |
| [ 10.458088] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0b6a000 |
| [ 10.495253] usb 2-4: new high-speed USB device number 2 using ehci-pci |
| [ 10.523301] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 |
| [ 10.530098] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| [ 10.537324] usb usb6: Product: OHCI PCI host controller |
| [ 10.542558] usb usb6: Manufacturer: Linux 3.16.0-1-grml-amd64 ohci_hcd |
| [ 10.549099] usb usb6: SerialNumber: 0000:00:16.0 |
| [ 10.554143] hub 6-0:1.0: USB hub found |
| [ 10.557932] hub 6-0:1.0: 2 ports detected |
| [ 10.587109] device-mapper: uevent: version 1.0.3 |
| [ 10.591935] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com |
| [ 11.051420] Switched to clocksource tsc |
| [ 11.412763] scsi 2:0:0:0: Direct-Access JetFlash TS4GJF2A/120 0.00 PQ: 0 ANSI: 2 |
| [ 11.425989] sd 2:0:0:0: [sda] 8028160 512-byte logical blocks: (4.11 GB/3.82 GiB) |
| [ 11.434489] sd 2:0:0:0: [sda] Write Protect is off |
| [ 11.439308] sd 2:0:0:0: [sda] Mode Sense: 00 00 00 00 |
| [ 11.440732] sd 2:0:0:0: [sda] Asking for cache data failed |
| [ 11.446237] sd 2:0:0:0: [sda] Assuming drive cache: write through |
| [ 11.458005] sda: sda1 |
| [ 11.463860] sd 2:0:0:0: [sda] Attached SCSI removable disk |
| [ 11.470789] sd 2:0:0:0: Attached scsi generic sg0 type 0 |
| [ 11.908786] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! |
| [ 12.995641] random: nonblocking pool is initialized |
| [ 25.613378] usb 2-4: device descriptor read/64, error -110 |
| [ 27.370169] loop: module loaded |
| [ 27.409211] loop0: unknown partition table |
| [ 40.835511] usb 2-4: device descriptor read/64, error -110 |
| [ 41.055529] usb 2-4: new high-speed USB device number 3 using ehci-pci |
| [ 56.173648] usb 2-4: device descriptor read/64, error -110 |
| [ 71.395807] usb 2-4: device descriptor read/64, error -110 |
| [ 71.615823] usb 2-4: new high-speed USB device number 4 using ehci-pci |
| [ 82.029272] usb 2-4: device not accepting address 4, error -110 |
| [ 82.145302] usb 2-4: new high-speed USB device number 5 using ehci-pci |
| [ 92.558760] usb 2-4: device not accepting address 5, error -110 |
| [ 92.564733] usb usb2-port4: unable to enumerate USB device |
| [ 92.842825] usb 5-4: new full-speed USB device number 2 using ohci-pci |
| [ 94.452781] FS-Cache: Loaded |
| [ 94.474033] 9pnet: Installing 9P2000 support |
| [ 94.491746] 9p: Installing v9fs 9p2000 file system support |
| [ 94.497272] FS-Cache: Netfs '9p' registered for caching |
| [ 99.144414] systemd-udevd[595]: starting version 215 |
| [ 99.702922] ACPI: acpi_idle registered with cpuidle |
| [ 99.740830] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 |
| [ 99.778559] acpi-cpufreq: overriding BIOS provided _PSD data |
| [ 99.945367] ipmi message handler version 39.2 |
| [ 99.949907] snd_hda_intel 0000:00:01.1: irq 76 for MSI/MSI-X |
| [ 99.950283] snd_hda_intel 0000:00:14.2: irq 77 for MSI/MSI-X |
| [ 99.958280] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 |
| [ 99.970226] IPMI System Interface driver. |
| [ 99.974373] ipmi_si 0000:01:00.3: probing via PCI |
| [ 99.991951] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 |
| [ 100.050863] ipmi_si 0000:01:00.3: [io 0x1c00-0x1cff] regsize 1 spacing 1 irq 35 |
| [ 100.058305] ipmi_si: Adding PCI-specified kcs state machine |
| [ 100.097790] EDAC MC: Ver: 3.0.0 |
| |
| [ 100.102869] ipmi_si: Trying PCI-specified kcs state machine at i/o address 0x1c00, slave address 0x0, irq 35 |
| [ 100.128411] input: PC Speaker as /devices/platform/pcspkr/input/input5 |
| [ 100.181452] MCE: In-kernel MCE decoding enabled. |
| [ 100.194995] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input6 |
| [ 100.204706] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7 |
| [ 100.259047] AMD64 EDAC driver v3.4.0 |
| [ 100.287974] EDAC amd64: DRAM ECC disabled. |
| [ 100.292100] EDAC amd64: NB MCE bank disabled, set MSR 0x0000017b[4] on node 0 to enable. |
| [ 100.300201] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. |
| Either enable ECC checking or force module loading by setting 'ecc_enable_override'. |
| (Note that use of the override may cause unknown side effects.) |
| [ 100.400737] sound hdaudioC1D0: ALC662 rev1: SKU not ready 0x411111f0 |
| [ 100.407278] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line |
| [ 100.415293] sound hdaudioC1D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0) |
| [ 100.421941] sound hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0) |
| [ 100.428067] sound hdaudioC1D0: mono: mono_out=0x0 |
| [ 100.433069] sound hdaudioC1D0: inputs: |
| [ 100.447241] sound hdaudioC1D0: Mic=0x18 |
| [ 100.499181] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card1/hdaudioC1D0/input8 |
| [ 100.530145] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 |
| [ 100.612159] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 |
| [ 100.699969] AVX version of gcm_enc/dec engaged. |
| [ 100.719957] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) |
| [ 100.856782] alg: No test for crc32 (crc32-pclmul) |
| [ 101.007509] kvm: Nested Virtualization enabled |
| [ 101.033616] kvm: Nested Paging enabled |
| [ 107.985000] usb 5-4: device descriptor read/64, error -110 |
| [ 123.231130] usb 5-4: device descriptor read/64, error -110 |
| [ 123.475140] usb 5-4: new full-speed USB device number 3 using ohci-pci |
| [ 138.617292] usb 5-4: device descriptor read/64, error -110 |
| [ 150.762951] ipmi_si: There appears to be no BMC at this location |
| [ 153.863457] usb 5-4: device descriptor read/64, error -110 |
| [ 154.107445] usb 5-4: new full-speed USB device number 4 using ohci-pci |
| [ 164.520900] usb 5-4: device not accepting address 4, error -110 |
| [ 164.660930] usb 5-4: new full-speed USB device number 5 using ohci-pci |
| [ 175.074389] usb 5-4: device not accepting address 5, error -110 |
| [ 175.080555] usb usb5-port4: unable to enumerate USB device |
| [ 175.086228] usb 1-4: USB disconnect, device number 2 |
| [ 177.324727] r8169 0000:02:00.0 eth1: link down |
| [ 177.329279] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready |
| [ 177.344016] r8169 0000:01:00.0 eth0: link down |
| [ 177.351269] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready |
| [ 177.357179] r8169 0000:01:00.0 eth0: link down |
| [ 177.510633] RPC: Registered named UNIX socket transport module. |
| [ 177.516591] RPC: Registered udp transport module. |
| [ 177.521308] RPC: Registered tcp transport module. |
| [ 177.526020] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| [ 177.594482] FS-Cache: Netfs 'nfs' registered for caching |
| [ 177.699411] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| [ 180.210859] r8169 0000:01:00.0 eth0: link up |
| [ 180.215189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| [ 183.844523] fuse init (API version 7.23) |