Paul Menzel | 2628571 | 2017-04-17 10:57:51 +0200 | [diff] [blame^] | 1 | [ 0.000000] Initializing cgroup subsys cpuset |
| 2 | [ 0.000000] Initializing cgroup subsys cpu |
| 3 | [ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1 |
| 4 | [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet |
| 5 | [ 0.000000] BIOS-provided physical RAM map: |
| 6 | [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000001000 type 16 |
| 7 | [ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) |
| 8 | [ 0.000000] BIOS-e820: 00000000000a0000 - 0000000000100000 (reserved) |
| 9 | [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6d6000 (usable) |
| 10 | [ 0.000000] BIOS-e820: 00000000bf6d6000 - 00000000bf800000 type 16 |
| 11 | [ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved) |
| 12 | [ 0.000000] BIOS-e820: 00000000c1c00000 - 00000000c4000000 (reserved) |
| 13 | [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000f0000000 (reserved) |
| 14 | [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fee00000 (reserved) |
| 15 | [ 0.000000] BIOS-e820: 0000000100000000 - 0000000134000000 (usable) |
| 16 | [ 0.000000] NX (Execute Disable) protection: active |
| 17 | [ 0.000000] SMBIOS 2.7 present. |
| 18 | [ 0.000000] DMI: Packard Bell EasyNote LM85/EasyNote LM85, BIOS 4.0-6558-gb98ab4a 08/02/2014 |
| 19 | [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) |
| 20 | [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) |
| 21 | [ 0.000000] No AGP bridge found |
| 22 | [ 0.000000] last_pfn = 0x134000 max_arch_pfn = 0x400000000 |
| 23 | [ 0.000000] MTRR default type: write-back |
| 24 | [ 0.000000] MTRR fixed ranges enabled: |
| 25 | [ 0.000000] 00000-9FFFF write-back |
| 26 | [ 0.000000] A0000-BFFFF uncachable |
| 27 | [ 0.000000] C0000-FFFFF write-back |
| 28 | [ 0.000000] MTRR variable ranges enabled: |
| 29 | [ 0.000000] 0 base 0BF800000 mask FFF800000 uncachable |
| 30 | [ 0.000000] 1 base 0C0000000 mask FF0000000 uncachable |
| 31 | [ 0.000000] 2 base 0D0000000 mask FF0000000 write-combining |
| 32 | [ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable |
| 33 | [ 0.000000] 4 disabled |
| 34 | [ 0.000000] 5 disabled |
| 35 | [ 0.000000] 6 disabled |
| 36 | [ 0.000000] 7 disabled |
| 37 | [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 |
| 38 | [ 0.000000] last_pfn = 0xbf6d6 max_arch_pfn = 0x400000000 |
| 39 | [ 0.000000] initial memory mapped : 0 - 20000000 |
| 40 | [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 |
| 41 | [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6d6000 |
| 42 | [ 0.000000] 0000000000 - 00bf600000 page 2M |
| 43 | [ 0.000000] 00bf600000 - 00bf6d6000 page 4k |
| 44 | [ 0.000000] kernel direct mapping tables up to bf6d6000 @ 1fffb000-20000000 |
| 45 | [ 0.000000] init_memory_mapping: 0000000100000000-0000000134000000 |
| 46 | [ 0.000000] 0100000000 - 0134000000 page 2M |
| 47 | [ 0.000000] kernel direct mapping tables up to 134000000 @ bf6d4000-bf6d6000 |
| 48 | [ 0.000000] RAMDISK: 36bfa000 - 375f5000 |
| 49 | [ 0.000000] ACPI: RSDP 00000000000f0000 00024 (v02 CORE ) |
| 50 | [ 0.000000] ACPI: XSDT 00000000bf7df0e0 0004C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 51 | [ 0.000000] ACPI: HPET 00000000bf7df210 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 52 | [ 0.000000] ACPI: APIC 00000000bf7df250 00074 (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 53 | [ 0.000000] ACPI: MCFG 00000000bf7df2d0 0003C (v01 CORE COREBOOT 00000000 CORE 00000000) |
| 54 | [ 0.000000] ACPI: FACP 00000000bf7e2740 000F4 (v03 CORE COREBOOT 00000000 CORE 00000000) |
| 55 | [ 0.000000] ACPI: DSDT 00000000bf7df350 032EE (v03 COREv4 COREBOOT 20140108 INTL 20140724) |
| 56 | [ 0.000000] ACPI: FACS 00000000bf7df310 00040 |
| 57 | [ 0.000000] ACPI: SSDT 00000000bf7e2840 00670 (v02 CORE COREBOOT 0000002A CORE 0000002A) |
| 58 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 59 | [ 0.000000] No NUMA configuration found |
| 60 | [ 0.000000] Faking a node at 0000000000000000-0000000134000000 |
| 61 | [ 0.000000] Initmem setup node 0 0000000000000000-0000000134000000 |
| 62 | [ 0.000000] NODE_DATA [0000000133ffb000 - 0000000133ffffff] |
| 63 | [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88012f800000-ffff880132ffffff] on node 0 |
| 64 | [ 0.000000] Zone PFN ranges: |
| 65 | [ 0.000000] DMA 0x00000010 -> 0x00001000 |
| 66 | [ 0.000000] DMA32 0x00001000 -> 0x00100000 |
| 67 | [ 0.000000] Normal 0x00100000 -> 0x00134000 |
| 68 | [ 0.000000] Movable zone start PFN for each node |
| 69 | [ 0.000000] early_node_map[3] active PFN ranges |
| 70 | [ 0.000000] 0: 0x00000010 -> 0x000000a0 |
| 71 | [ 0.000000] 0: 0x00000100 -> 0x000bf6d6 |
| 72 | [ 0.000000] 0: 0x00100000 -> 0x00134000 |
| 73 | [ 0.000000] On node 0 totalpages: 996966 |
| 74 | [ 0.000000] DMA zone: 56 pages used for memmap |
| 75 | [ 0.000000] DMA zone: 6 pages reserved |
| 76 | [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 |
| 77 | [ 0.000000] DMA32 zone: 14280 pages used for memmap |
| 78 | [ 0.000000] DMA32 zone: 765710 pages, LIFO batch:31 |
| 79 | [ 0.000000] Normal zone: 2912 pages used for memmap |
| 80 | [ 0.000000] Normal zone: 210080 pages, LIFO batch:31 |
| 81 | [ 0.000000] ACPI: PM-Timer IO Port: 0x508 |
| 82 | [ 0.000000] ACPI: Local APIC address 0xfee00000 |
| 83 | [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) |
| 84 | [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled) |
| 85 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) |
| 86 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) |
| 87 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) |
| 88 | [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) |
| 89 | [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) |
| 90 | [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 |
| 91 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) |
| 92 | [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) |
| 93 | [ 0.000000] ACPI: IRQ0 used by override. |
| 94 | [ 0.000000] ACPI: IRQ2 used by override. |
| 95 | [ 0.000000] ACPI: IRQ9 used by override. |
| 96 | [ 0.000000] Using ACPI (MADT) for SMP configuration information |
| 97 | [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 |
| 98 | [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs |
| 99 | [ 0.000000] nr_irqs_gsi: 40 |
| 100 | [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000 |
| 101 | [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 |
| 102 | [ 0.000000] PM: Registered nosave memory: 00000000bf6d6000 - 00000000bf800000 |
| 103 | [ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000 |
| 104 | [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000c1c00000 |
| 105 | [ 0.000000] PM: Registered nosave memory: 00000000c1c00000 - 00000000c4000000 |
| 106 | [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000d0000000 |
| 107 | [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000 |
| 108 | [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fed00000 |
| 109 | [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 |
| 110 | [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 0000000100000000 |
| 111 | [ 0.000000] Allocating PCI resources starting at f0000000 (gap: f0000000:ed00000) |
| 112 | [ 0.000000] Booting paravirtualized kernel on bare hardware |
| 113 | [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1 |
| 114 | [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880133c00000 s82944 r8192 d23552 u1048576 |
| 115 | [ 0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152 |
| 116 | [ 0.000000] pcpu-alloc: [0] 0 1 |
| 117 | [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 979712 |
| 118 | [ 0.000000] Policy zone: Normal |
| 119 | [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet |
| 120 | [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) |
| 121 | [ 0.000000] Checking aperture... |
| 122 | [ 0.000000] No AGP bridge found |
| 123 | [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area |
| 124 | [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! |
| 125 | [ 0.000000] Memory: 3845492k/5046272k available (3426k kernel code, 1058408k absent, 142372k reserved, 3312k data, 576k init) |
| 126 | [ 0.000000] Hierarchical RCU implementation. |
| 127 | [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. |
| 128 | [ 0.000000] NR_IRQS:33024 nr_irqs:512 16 |
| 129 | [ 0.000000] Extended CMOS year: 2000 |
| 130 | [ 0.000000] Console: colour VGA+ 80x25 |
| 131 | [ 0.000000] console [tty0] enabled |
| 132 | [ 0.000000] hpet clockevent registered |
| 133 | [ 0.000000] Fast TSC calibration using PIT |
| 134 | [ 0.004000] Detected 2128.014 MHz processor. |
| 135 | [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.02 BogoMIPS (lpj=8512056) |
| 136 | [ 0.000007] pid_max: default: 32768 minimum: 301 |
| 137 | [ 0.000047] Security Framework initialized |
| 138 | [ 0.000052] AppArmor: AppArmor disabled by boot time parameter |
| 139 | [ 0.000311] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) |
| 140 | [ 0.001296] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) |
| 141 | [ 0.001725] Mount-cache hash table entries: 256 |
| 142 | [ 0.001846] Initializing cgroup subsys cpuacct |
| 143 | [ 0.001851] Initializing cgroup subsys memory |
| 144 | [ 0.001862] Initializing cgroup subsys devices |
| 145 | [ 0.001865] Initializing cgroup subsys freezer |
| 146 | [ 0.001867] Initializing cgroup subsys net_cls |
| 147 | [ 0.001870] Initializing cgroup subsys blkio |
| 148 | [ 0.001876] Initializing cgroup subsys perf_event |
| 149 | [ 0.001906] CPU: Physical Processor ID: 0 |
| 150 | [ 0.001907] CPU: Processor Core ID: 0 |
| 151 | [ 0.001913] mce: CPU supports 9 MCE banks |
| 152 | [ 0.001925] CPU0: Thermal monitoring enabled (TM1) |
| 153 | [ 0.001934] using mwait in idle threads. |
| 154 | [ 0.002376] ACPI: Core revision 20110623 |
| 155 | [ 0.005472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 |
| 156 | [ 0.045140] CPU0: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz stepping 05 |
| 157 | [ 0.151452] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. |
| 158 | [ 0.151460] ... version: 3 |
| 159 | [ 0.151462] ... bit width: 48 |
| 160 | [ 0.151463] ... generic registers: 4 |
| 161 | [ 0.151465] ... value mask: 0000ffffffffffff |
| 162 | [ 0.151466] ... max period: 000000007fffffff |
| 163 | [ 0.151468] ... fixed-purpose events: 3 |
| 164 | [ 0.151469] ... event mask: 000000070000000f |
| 165 | [ 0.151627] NMI watchdog enabled, takes one hw-pmu counter. |
| 166 | [ 0.151748] Booting Node 0, Processors #1 Ok. |
| 167 | [ 0.151750] smpboot cpu 1: start_ip = 9a000 |
| 168 | [ 0.259519] NMI watchdog enabled, takes one hw-pmu counter. |
| 169 | [ 0.259563] Brought up 2 CPUs |
| 170 | [ 0.259565] Total of 2 processors activated (8511.94 BogoMIPS). |
| 171 | [ 0.260900] devtmpfs: initialized |
| 172 | [ 0.265155] print_constraints: dummy: |
| 173 | [ 0.265218] NET: Registered protocol family 16 |
| 174 | [ 0.265324] ACPI: bus type pci registered |
| 175 | [ 0.265395] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) |
| 176 | [ 0.265399] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 |
| 177 | [ 0.283420] PCI: Using configuration type 1 for base access |
| 178 | [ 0.284171] bio: create slab <bio-0> at 0 |
| 179 | [ 0.284274] ACPI: Added _OSI(Module Device) |
| 180 | [ 0.284276] ACPI: Added _OSI(Processor Device) |
| 181 | [ 0.284279] ACPI: Added _OSI(3.0 _SCP Extensions) |
| 182 | [ 0.284281] ACPI: Added _OSI(Processor Aggregator Device) |
| 183 | [ 0.285148] ACPI: EC: Look up EC in DSDT |
| 184 | [ 0.287700] ACPI: Interpreter enabled |
| 185 | [ 0.287706] ACPI: (supports S0 S3 S4 S5) |
| 186 | [ 0.287733] ACPI: Using IOAPIC for interrupt routing |
| 187 | [ 0.294880] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 |
| 188 | [ 0.295000] ACPI: No dock devices found. |
| 189 | [ 0.295001] HEST: Table not found. |
| 190 | [ 0.295005] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug |
| 191 | [ 0.295126] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) |
| 192 | [ 0.295310] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] |
| 193 | [ 0.295313] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] |
| 194 | [ 0.295316] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] |
| 195 | [ 0.295318] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] |
| 196 | [ 0.295321] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] |
| 197 | [ 0.295323] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] |
| 198 | [ 0.295325] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] |
| 199 | [ 0.295328] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] |
| 200 | [ 0.295330] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] |
| 201 | [ 0.295332] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] |
| 202 | [ 0.295335] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] |
| 203 | [ 0.295337] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] |
| 204 | [ 0.295339] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] |
| 205 | [ 0.295342] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] |
| 206 | [ 0.295344] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] |
| 207 | [ 0.295346] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff] |
| 208 | [ 0.295349] pci_root PNP0A08:00: host bridge window [mem 0xc4000000-0xfebfffff] |
| 209 | [ 0.295351] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] |
| 210 | [ 0.295369] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600 |
| 211 | [ 0.295394] DMAR: Disabling batched IOTLB flush on Ironlake |
| 212 | [ 0.295418] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604 |
| 213 | [ 0.295452] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold |
| 214 | [ 0.295468] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300 |
| 215 | [ 0.295479] pci 0000:00:02.0: reg 10: [mem 0xcf800000-0xcfbfffff 64bit] |
| 216 | [ 0.295486] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref] |
| 217 | [ 0.295491] pci 0000:00:02.0: reg 20: [io 0x1020-0x1027] |
| 218 | [ 0.295556] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780 |
| 219 | [ 0.295584] pci 0000:00:16.0: reg 10: [mem 0xcfe06100-0xcfe0610f 64bit] |
| 220 | [ 0.295674] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold |
| 221 | [ 0.295711] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 |
| 222 | [ 0.295731] pci 0000:00:1a.0: reg 10: [mem 0xcfe05800-0xcfe05bff] |
| 223 | [ 0.295815] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold |
| 224 | [ 0.295842] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 |
| 225 | [ 0.295856] pci 0000:00:1b.0: reg 10: [mem 0xcfe00000-0xcfe03fff 64bit] |
| 226 | [ 0.295921] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold |
| 227 | [ 0.295943] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 |
| 228 | [ 0.296007] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold |
| 229 | [ 0.296031] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604 |
| 230 | [ 0.296095] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold |
| 231 | [ 0.296132] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 |
| 232 | [ 0.296152] pci 0000:00:1d.0: reg 10: [mem 0xcfe05c00-0xcfe05fff] |
| 233 | [ 0.296237] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold |
| 234 | [ 0.296260] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 |
| 235 | [ 0.296325] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601 |
| 236 | [ 0.296449] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106 |
| 237 | [ 0.296473] pci 0000:00:1f.2: reg 10: [io 0x1028-0x102f] |
| 238 | [ 0.296483] pci 0000:00:1f.2: reg 14: [io 0x1038-0x103b] |
| 239 | [ 0.296494] pci 0000:00:1f.2: reg 18: [io 0x1030-0x1037] |
| 240 | [ 0.296504] pci 0000:00:1f.2: reg 1c: [io 0x103c-0x103f] |
| 241 | [ 0.296514] pci 0000:00:1f.2: reg 20: [io 0x1000-0x101f] |
| 242 | [ 0.296524] pci 0000:00:1f.2: reg 24: [mem 0xcfe05000-0xcfe057ff] |
| 243 | [ 0.296584] pci 0000:00:1f.2: PME# supported from D3hot |
| 244 | [ 0.296607] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05 |
| 245 | [ 0.296622] pci 0000:00:1f.3: reg 10: [mem 0xcfe06000-0xcfe060ff 64bit] |
| 246 | [ 0.296642] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] |
| 247 | [ 0.296680] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180 |
| 248 | [ 0.296703] pci 0000:00:1f.6: reg 10: [mem 0xcfe04000-0xcfe04fff 64bit] |
| 249 | [ 0.296802] pci 0000:00:01.0: PCI bridge to [bus 01-01] |
| 250 | [ 0.296896] pci 0000:02:00.0: [14e4:1692] type 0 class 0x000200 |
| 251 | [ 0.296923] pci 0000:02:00.0: reg 10: [mem 0xcfc00000-0xcfc0ffff 64bit] |
| 252 | [ 0.297059] pci 0000:02:00.0: PME# supported from D3hot D3cold |
| 253 | [ 0.297119] pci 0000:00:1c.0: PCI bridge to [bus 02-02] |
| 254 | [ 0.297125] pci 0000:00:1c.0: bridge window [mem 0xcfc00000-0xcfcfffff] |
| 255 | [ 0.297194] pci 0000:03:00.0: [168c:002e] type 0 class 0x000280 |
| 256 | [ 0.297222] pci 0000:03:00.0: reg 10: [mem 0xcfd00000-0xcfd0ffff 64bit] |
| 257 | [ 0.297355] pci 0000:03:00.0: supports D1 |
| 258 | [ 0.297357] pci 0000:03:00.0: PME# supported from D0 D1 D3hot |
| 259 | [ 0.297416] pci 0000:00:1c.1: PCI bridge to [bus 03-03] |
| 260 | [ 0.297422] pci 0000:00:1c.1: bridge window [mem 0xcfd00000-0xcfdfffff] |
| 261 | [ 0.297484] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) |
| 262 | [ 0.297494] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) |
| 263 | [ 0.297497] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) |
| 264 | [ 0.297500] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) |
| 265 | [ 0.297502] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) |
| 266 | [ 0.297505] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) |
| 267 | [ 0.297508] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) |
| 268 | [ 0.297510] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode) |
| 269 | [ 0.297513] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) |
| 270 | [ 0.297516] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) |
| 271 | [ 0.297519] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) |
| 272 | [ 0.297521] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) |
| 273 | [ 0.297524] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) |
| 274 | [ 0.297526] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) |
| 275 | [ 0.297529] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) |
| 276 | [ 0.297532] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) |
| 277 | [ 0.297534] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode) |
| 278 | [ 0.297537] pci 0000:00:1e.0: bridge window [mem 0xc4000000-0xfebfffff] (subtractive decode) |
| 279 | [ 0.297540] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode) |
| 280 | [ 0.297558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] |
| 281 | [ 0.297814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] |
| 282 | [ 0.298117] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] |
| 283 | [ 0.298484] pci0000:00: Requesting ACPI _OSC control (0x1d) |
| 284 | [ 0.298529] pci0000:00: ACPI _OSC control (0x1d) granted |
| 285 | [ 0.302030] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff]) |
| 286 | [ 0.302079] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600 |
| 287 | [ 0.302100] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600 |
| 288 | [ 0.302125] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600 |
| 289 | [ 0.302144] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600 |
| 290 | [ 0.302164] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600 |
| 291 | [ 0.302184] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600 |
| 292 | [ 0.302219] pci0000:ff: Requesting ACPI _OSC control (0x1d) |
| 293 | [ 0.302222] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d |
| 294 | [ 0.302224] ACPI _OSC control for PCIe not granted, disabling ASPM |
| 295 | [ 0.302523] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 |
| 296 | [ 0.302577] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) |
| 297 | [ 0.302629] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 |
| 298 | [ 0.302680] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) |
| 299 | [ 0.302731] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 |
| 300 | [ 0.302782] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15) |
| 301 | [ 0.302834] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 |
| 302 | [ 0.302885] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) |
| 303 | [ 0.302999] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none |
| 304 | [ 0.303010] vgaarb: loaded |
| 305 | [ 0.303011] vgaarb: bridge control possible 0000:00:02.0 |
| 306 | [ 0.303057] PCI: Using ACPI for IRQ routing |
| 307 | [ 0.311734] PCI: pci_cache_line_size set to 64 bytes |
| 308 | [ 0.311871] reserve RAM buffer: 00000000bf6d6000 - 00000000bfffffff |
| 309 | [ 0.311995] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 |
| 310 | [ 0.312001] hpet0: 8 comparators, 64-bit 14.318180 MHz counter |
| 311 | [ 0.314020] Switching to clocksource hpet |
| 312 | [ 0.315963] pnp: PnP ACPI init |
| 313 | [ 0.315980] ACPI: bus type pnp registered |
| 314 | [ 0.316072] pnp 00:00: [bus 00-ff] |
| 315 | [ 0.316075] pnp 00:00: [io 0x0000-0x0cf7 window] |
| 316 | [ 0.316078] pnp 00:00: [io 0x0cf8-0x0cff] |
| 317 | [ 0.316080] pnp 00:00: [io 0x0d00-0xffff window] |
| 318 | [ 0.316082] pnp 00:00: [mem 0x000a0000-0x000bffff window] |
| 319 | [ 0.316084] pnp 00:00: [mem 0x000c0000-0x000c3fff window] |
| 320 | [ 0.316087] pnp 00:00: [mem 0x000c4000-0x000c7fff window] |
| 321 | [ 0.316089] pnp 00:00: [mem 0x000c8000-0x000cbfff window] |
| 322 | [ 0.316091] pnp 00:00: [mem 0x000cc000-0x000cffff window] |
| 323 | [ 0.316093] pnp 00:00: [mem 0x000d0000-0x000d3fff window] |
| 324 | [ 0.316095] pnp 00:00: [mem 0x000d4000-0x000d7fff window] |
| 325 | [ 0.316097] pnp 00:00: [mem 0x000d8000-0x000dbfff window] |
| 326 | [ 0.316099] pnp 00:00: [mem 0x000dc000-0x000dffff window] |
| 327 | [ 0.316102] pnp 00:00: [mem 0x000e0000-0x000e3fff window] |
| 328 | [ 0.316104] pnp 00:00: [mem 0x000e4000-0x000e7fff window] |
| 329 | [ 0.316106] pnp 00:00: [mem 0x000e8000-0x000ebfff window] |
| 330 | [ 0.316108] pnp 00:00: [mem 0x000ec000-0x000effff window] |
| 331 | [ 0.316110] pnp 00:00: [mem 0x000f0000-0x000fffff window] |
| 332 | [ 0.316112] pnp 00:00: [mem 0xc4000000-0xfebfffff window] |
| 333 | [ 0.316114] pnp 00:00: [mem 0xfed40000-0xfed44fff window] |
| 334 | [ 0.316164] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) |
| 335 | [ 0.316186] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] |
| 336 | [ 0.316189] pnp 00:01: [mem 0xfed10000-0xfed17fff] |
| 337 | [ 0.316191] pnp 00:01: [mem 0xfed18000-0xfed18fff] |
| 338 | [ 0.316193] pnp 00:01: [mem 0xfed19000-0xfed19fff] |
| 339 | [ 0.316195] pnp 00:01: [mem 0xe0000000-0xe3ffffff] |
| 340 | [ 0.316197] pnp 00:01: [mem 0xfed20000-0xfed3ffff] |
| 341 | [ 0.316201] pnp 00:01: [mem 0xfed40000-0xfed44fff] |
| 342 | [ 0.316203] pnp 00:01: [mem 0xfed45000-0xfed8ffff] |
| 343 | [ 0.316205] pnp 00:01: [mem 0x20000000-0x201fffff] |
| 344 | [ 0.316207] pnp 00:01: [mem 0x40000000-0x401fffff] |
| 345 | [ 0.316255] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved |
| 346 | [ 0.316258] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved |
| 347 | [ 0.316261] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved |
| 348 | [ 0.316264] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved |
| 349 | [ 0.316267] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved |
| 350 | [ 0.316270] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved |
| 351 | [ 0.316272] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved |
| 352 | [ 0.316276] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved |
| 353 | [ 0.316279] system 00:01: [mem 0x20000000-0x201fffff] could not be reserved |
| 354 | [ 0.316282] system 00:01: [mem 0x40000000-0x401fffff] could not be reserved |
| 355 | [ 0.316285] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 356 | [ 0.317488] pnp 00:02: [io 0x0000-0x001f] |
| 357 | [ 0.317491] pnp 00:02: [io 0x0081-0x0091] |
| 358 | [ 0.317493] pnp 00:02: [io 0x0093-0x009f] |
| 359 | [ 0.317495] pnp 00:02: [io 0x00c0-0x00df] |
| 360 | [ 0.317497] pnp 00:02: [dma 4] |
| 361 | [ 0.317542] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) |
| 362 | [ 0.317553] pnp 00:03: [mem 0xff000000-0xffffffff] |
| 363 | [ 0.317587] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) |
| 364 | [ 0.317674] pnp 00:04: [mem 0xfed00000-0xfed003ff] |
| 365 | [ 0.317731] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved |
| 366 | [ 0.317735] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) |
| 367 | [ 0.317748] pnp 00:05: [io 0x00f0] |
| 368 | [ 0.317758] pnp 00:05: [irq 13] |
| 369 | [ 0.317796] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) |
| 370 | [ 0.317809] pnp 00:06: [io 0x002e-0x002f] |
| 371 | [ 0.317811] pnp 00:06: [io 0x004e-0x004f] |
| 372 | [ 0.317814] pnp 00:06: [io 0x0061] |
| 373 | [ 0.317815] pnp 00:06: [io 0x0063] |
| 374 | [ 0.317817] pnp 00:06: [io 0x0065] |
| 375 | [ 0.317819] pnp 00:06: [io 0x0067] |
| 376 | [ 0.317821] pnp 00:06: [io 0x0080] |
| 377 | [ 0.317823] pnp 00:06: [io 0x0092] |
| 378 | [ 0.317825] pnp 00:06: [io 0x00b2-0x00b3] |
| 379 | [ 0.317826] pnp 00:06: [io 0x0500-0x057f] |
| 380 | [ 0.317828] pnp 00:06: [io 0x0480-0x04bf] |
| 381 | [ 0.317882] system 00:06: [io 0x0500-0x057f] has been reserved |
| 382 | [ 0.317885] system 00:06: [io 0x0480-0x04bf] has been reserved |
| 383 | [ 0.317888] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) |
| 384 | [ 0.317899] pnp 00:07: [io 0x0070-0x0077] |
| 385 | [ 0.317934] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) |
| 386 | [ 0.317954] pnp 00:08: [io 0x0060] |
| 387 | [ 0.317956] pnp 00:08: [io 0x0064] |
| 388 | [ 0.317963] pnp 00:08: [irq 1] |
| 389 | [ 0.318001] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) |
| 390 | [ 0.318030] pnp 00:09: [irq 12] |
| 391 | [ 0.318069] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) |
| 392 | [ 0.318089] pnp 00:0a: [bus ff] |
| 393 | [ 0.318126] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active) |
| 394 | [ 0.318136] pnp: PnP ACPI: found 11 devices |
| 395 | [ 0.318137] ACPI: ACPI bus type pnp unregistered |
| 396 | [ 0.325048] PCI: max bus depth: 1 pci_try_num: 2 |
| 397 | [ 0.325077] pci 0000:00:01.0: PCI bridge to [bus 01-01] |
| 398 | [ 0.325083] pci 0000:00:1c.0: PCI bridge to [bus 02-02] |
| 399 | [ 0.325088] pci 0000:00:1c.0: bridge window [mem 0xcfc00000-0xcfcfffff] |
| 400 | [ 0.325096] pci 0000:00:1c.1: PCI bridge to [bus 03-03] |
| 401 | [ 0.325101] pci 0000:00:1c.1: bridge window [mem 0xcfd00000-0xcfdfffff] |
| 402 | [ 0.325109] pci 0000:00:1e.0: PCI bridge to [bus 04-04] |
| 403 | [ 0.325132] pci 0000:00:01.0: setting latency timer to 64 |
| 404 | [ 0.325141] pci 0000:00:1c.0: setting latency timer to 64 |
| 405 | [ 0.325152] pci 0000:00:1c.1: setting latency timer to 64 |
| 406 | [ 0.325158] pci 0000:00:1e.0: setting latency timer to 64 |
| 407 | [ 0.325162] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] |
| 408 | [ 0.325165] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] |
| 409 | [ 0.325167] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] |
| 410 | [ 0.325169] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] |
| 411 | [ 0.325171] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] |
| 412 | [ 0.325173] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] |
| 413 | [ 0.325176] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff] |
| 414 | [ 0.325178] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff] |
| 415 | [ 0.325180] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff] |
| 416 | [ 0.325182] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff] |
| 417 | [ 0.325184] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff] |
| 418 | [ 0.325186] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff] |
| 419 | [ 0.325188] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff] |
| 420 | [ 0.325190] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff] |
| 421 | [ 0.325193] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff] |
| 422 | [ 0.325195] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff] |
| 423 | [ 0.325197] pci_bus 0000:00: resource 20 [mem 0xc4000000-0xfebfffff] |
| 424 | [ 0.325199] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff] |
| 425 | [ 0.325202] pci_bus 0000:02: resource 1 [mem 0xcfc00000-0xcfcfffff] |
| 426 | [ 0.325204] pci_bus 0000:03: resource 1 [mem 0xcfd00000-0xcfdfffff] |
| 427 | [ 0.325206] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] |
| 428 | [ 0.325208] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] |
| 429 | [ 0.325210] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] |
| 430 | [ 0.325213] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff] |
| 431 | [ 0.325215] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff] |
| 432 | [ 0.325217] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff] |
| 433 | [ 0.325219] pci_bus 0000:04: resource 10 [mem 0x000cc000-0x000cffff] |
| 434 | [ 0.325221] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff] |
| 435 | [ 0.325223] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff] |
| 436 | [ 0.325225] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff] |
| 437 | [ 0.325227] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff] |
| 438 | [ 0.325229] pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff] |
| 439 | [ 0.325232] pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff] |
| 440 | [ 0.325234] pci_bus 0000:04: resource 17 [mem 0x000e8000-0x000ebfff] |
| 441 | [ 0.325236] pci_bus 0000:04: resource 18 [mem 0x000ec000-0x000effff] |
| 442 | [ 0.325238] pci_bus 0000:04: resource 19 [mem 0x000f0000-0x000fffff] |
| 443 | [ 0.325240] pci_bus 0000:04: resource 20 [mem 0xc4000000-0xfebfffff] |
| 444 | [ 0.325242] pci_bus 0000:04: resource 21 [mem 0xfed40000-0xfed44fff] |
| 445 | [ 0.325299] NET: Registered protocol family 2 |
| 446 | [ 0.325432] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) |
| 447 | [ 0.326329] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) |
| 448 | [ 0.328088] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) |
| 449 | [ 0.328297] TCP: Hash tables configured (established 524288 bind 65536) |
| 450 | [ 0.328300] TCP reno registered |
| 451 | [ 0.328308] UDP hash table entries: 2048 (order: 4, 65536 bytes) |
| 452 | [ 0.328330] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) |
| 453 | [ 0.328455] NET: Registered protocol family 1 |
| 454 | [ 0.328474] pci 0000:00:02.0: Boot video device |
| 455 | [ 0.328631] PCI: CLS 64 bytes, default 64 |
| 456 | [ 0.328686] Unpacking initramfs... |
| 457 | [ 0.565341] Freeing initrd memory: 10220k freed |
| 458 | [ 0.567641] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) |
| 459 | [ 0.567647] Placing 64MB software IO TLB between ffff8800bb6d4000 - ffff8800bf6d4000 |
| 460 | [ 0.567649] software IO TLB at phys 0xbb6d4000 - 0xbf6d4000 |
| 461 | [ 0.568130] audit: initializing netlink socket (disabled) |
| 462 | [ 0.568143] type=2000 audit(1406976023.440:1): initialized |
| 463 | [ 0.584322] HugeTLB registered 2 MB page size, pre-allocated 0 pages |
| 464 | [ 0.585172] VFS: Disk quotas dquot_6.5.2 |
| 465 | [ 0.585200] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) |
| 466 | [ 0.585270] msgmni has been set to 7530 |
| 467 | [ 0.585436] alg: No test for stdrng (krng) |
| 468 | [ 0.585468] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) |
| 469 | [ 0.585472] io scheduler noop registered |
| 470 | [ 0.585473] io scheduler deadline registered |
| 471 | [ 0.585488] io scheduler cfq registered (default) |
| 472 | [ 0.585581] pcieport 0000:00:01.0: setting latency timer to 64 |
| 473 | [ 0.585611] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X |
| 474 | [ 0.585677] pcieport 0000:00:1c.0: setting latency timer to 64 |
| 475 | [ 0.585712] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X |
| 476 | [ 0.585775] pcieport 0000:00:1c.1: setting latency timer to 64 |
| 477 | [ 0.585808] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X |
| 478 | [ 0.585898] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt |
| 479 | [ 0.585902] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded |
| 480 | [ 0.585933] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt |
| 481 | [ 0.585936] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt |
| 482 | [ 0.585940] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded |
| 483 | [ 0.585959] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt |
| 484 | [ 0.585962] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt |
| 485 | [ 0.585966] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded |
| 486 | [ 0.585984] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 |
| 487 | [ 0.586005] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 |
| 488 | [ 0.586007] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 |
| 489 | [ 0.586291] intel_idle: MWAIT substates: 0x120 |
| 490 | [ 0.586293] intel_idle: v0.4 model 0x25 |
| 491 | [ 0.586294] intel_idle: lapic_timer_reliable_states 0xffffffff |
| 492 | [ 0.586329] ERST: Table is not found! |
| 493 | [ 0.586331] GHES: HEST is not enabled! |
| 494 | [ 0.586390] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled |
| 495 | [ 0.634314] Linux agpgart interface v0.103 |
| 496 | [ 0.634396] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset |
| 497 | [ 0.634459] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable |
| 498 | [ 0.634994] agpgart-intel 0000:00:00.0: detected 32768K stolen memory |
| 499 | [ 0.635157] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 |
| 500 | [ 0.635300] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 |
| 501 | [ 0.656229] serio: i8042 KBD port at 0x60,0x64 irq 1 |
| 502 | [ 0.656237] serio: i8042 AUX port at 0x60,0x64 irq 12 |
| 503 | [ 0.656372] mousedev: PS/2 mouse device common for all mice |
| 504 | [ 0.658502] rtc_cmos 00:07: RTC can wake from S4 |
| 505 | [ 0.658625] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 |
| 506 | [ 0.658655] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs |
| 507 | [ 0.658698] cpuidle: using governor ladder |
| 508 | [ 0.658736] cpuidle: using governor menu |
| 509 | [ 0.658942] TCP cubic registered |
| 510 | [ 0.659028] NET: Registered protocol family 10 |
| 511 | [ 0.659478] Mobile IPv6 |
| 512 | [ 0.659481] NET: Registered protocol family 17 |
| 513 | [ 0.659485] Registering the dns_resolver key type |
| 514 | [ 0.659758] PM: Hibernation image not present or could not be loaded. |
| 515 | [ 0.659771] registered taskstats version 1 |
| 516 | [ 0.660457] rtc_cmos 00:07: setting system clock to 2014-08-02 10:40:24 UTC (1406976024) |
| 517 | [ 0.660499] Initializing network drop monitor service |
| 518 | [ 0.661827] Freeing unused kernel memory: 576k freed |
| 519 | [ 0.661950] Write protecting the kernel read-only data: 6144k |
| 520 | [ 0.664813] Freeing unused kernel memory: 652k freed |
| 521 | [ 0.667772] Freeing unused kernel memory: 688k freed |
| 522 | [ 0.677472] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 |
| 523 | [ 0.682373] udevd[49]: starting version 175 |
| 524 | [ 0.708602] usbcore: registered new interface driver usbfs |
| 525 | [ 0.708630] usbcore: registered new interface driver hub |
| 526 | [ 0.711737] SCSI subsystem initialized |
| 527 | [ 0.717514] tg3.c:v3.121 (November 2, 2011) |
| 528 | [ 0.717570] tg3 0000:02:00.0: setting latency timer to 64 |
| 529 | [ 0.722798] usbcore: registered new device driver usb |
| 530 | [ 0.723232] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver |
| 531 | [ 0.723284] ehci_hcd 0000:00:1a.0: setting latency timer to 64 |
| 532 | [ 0.723289] ehci_hcd 0000:00:1a.0: EHCI Host Controller |
| 533 | [ 0.723315] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 |
| 534 | [ 0.723346] ehci_hcd 0000:00:1a.0: debug port 2 |
| 535 | [ 0.727234] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported |
| 536 | [ 0.728149] libata version 3.00 loaded. |
| 537 | [ 0.750359] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xcfe05800 |
| 538 | [ 0.755564] tg3 mdio bus: probed |
| 539 | [ 0.758273] thermal LNXTHERM:00: registered as thermal_zone0 |
| 540 | [ 0.758276] ACPI: Thermal Zone [THM0] (45 C) |
| 541 | [ 0.765896] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 20:6a:8a:2f:fa:2c |
| 542 | [ 0.765900] tg3 0000:02:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01) |
| 543 | [ 0.765904] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] |
| 544 | [ 0.765907] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] |
| 545 | [ 0.766225] thermal LNXTHERM:01: registered as thermal_zone1 |
| 546 | [ 0.766228] ACPI: Thermal Zone [THM1] (27 C) |
| 547 | [ 0.773895] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 |
| 548 | [ 0.773947] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 |
| 549 | [ 0.773954] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 550 | [ 0.773959] usb usb1: Product: EHCI Host Controller |
| 551 | [ 0.773963] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd |
| 552 | [ 0.773968] usb usb1: SerialNumber: 0000:00:1a.0 |
| 553 | [ 0.774121] hub 1-0:1.0: USB hub found |
| 554 | [ 0.774126] hub 1-0:1.0: 2 ports detected |
| 555 | [ 0.774525] ahci 0000:00:1f.2: version 3.0 |
| 556 | [ 0.774628] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X |
| 557 | [ 0.774660] ahci: SSS flag set, parallel bus scan disabled |
| 558 | [ 0.774687] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode |
| 559 | [ 0.774691] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst |
| 560 | [ 0.774696] ahci 0000:00:1f.2: setting latency timer to 64 |
| 561 | [ 0.775251] scsi0 : ahci |
| 562 | [ 0.775422] scsi1 : ahci |
| 563 | [ 0.775500] scsi2 : ahci |
| 564 | [ 0.775568] scsi3 : ahci |
| 565 | [ 0.775637] scsi4 : ahci |
| 566 | [ 0.775742] ata1: SATA max UDMA/133 abar m2048@0xcfe05000 port 0xcfe05100 irq 43 |
| 567 | [ 0.775745] ata2: DUMMY |
| 568 | [ 0.775746] ata3: DUMMY |
| 569 | [ 0.775747] ata4: DUMMY |
| 570 | [ 0.775750] ata5: SATA max UDMA/133 abar m2048@0xcfe05000 port 0xcfe05300 irq 43 |
| 571 | [ 0.775819] ehci_hcd 0000:00:1d.0: setting latency timer to 64 |
| 572 | [ 0.775824] ehci_hcd 0000:00:1d.0: EHCI Host Controller |
| 573 | [ 0.775835] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 |
| 574 | [ 0.775868] ehci_hcd 0000:00:1d.0: debug port 2 |
| 575 | [ 0.779787] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported |
| 576 | [ 0.779937] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xcfe05c00 |
| 577 | [ 0.793888] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 |
| 578 | [ 0.793954] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 |
| 579 | [ 0.793961] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 580 | [ 0.793966] usb usb2: Product: EHCI Host Controller |
| 581 | [ 0.793970] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd |
| 582 | [ 0.793975] usb usb2: SerialNumber: 0000:00:1d.0 |
| 583 | [ 0.794240] hub 2-0:1.0: USB hub found |
| 584 | [ 0.794245] hub 2-0:1.0: 2 ports detected |
| 585 | [ 1.085798] usb 1-1: new high-speed USB device number 2 using ehci_hcd |
| 586 | [ 1.097770] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 587 | [ 1.098569] ata1.00: ATA-8: SanDisk SDSSDH2256G, X211200, max UDMA/133 |
| 588 | [ 1.098577] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA |
| 589 | [ 1.099456] ata1.00: configured for UDMA/133 |
| 590 | [ 1.099773] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDH22 X211 PQ: 0 ANSI: 5 |
| 591 | [ 1.218041] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 |
| 592 | [ 1.218048] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 593 | [ 1.218545] hub 1-1:1.0: USB hub found |
| 594 | [ 1.218651] hub 1-1:1.0: 6 ports detected |
| 595 | [ 1.329661] usb 2-1: new high-speed USB device number 2 using ehci_hcd |
| 596 | [ 1.417633] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| 597 | [ 1.420673] ata5.00: ATAPI: Slimtype DVD A DS8A5SH, XA15, max UDMA/100 |
| 598 | [ 1.422026] ata5.00: configured for UDMA/100 |
| 599 | [ 1.428101] scsi 4:0:0:0: CD-ROM Slimtype DVD A DS8A5SH XA15 PQ: 0 ANSI: 5 |
| 600 | [ 1.432363] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB) |
| 601 | [ 1.432445] sd 0:0:0:0: [sda] Write Protect is off |
| 602 | [ 1.432449] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 |
| 603 | [ 1.432480] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA |
| 604 | [ 1.437686] sda: sda1 sda2 sda3 < sda5 sda6 sda7 > |
| 605 | [ 1.438896] sd 0:0:0:0: [sda] Attached SCSI disk |
| 606 | [ 1.440542] sd 0:0:0:0: Attached scsi generic sg0 type 0 |
| 607 | [ 1.440583] sr 4:0:0:0: Attached scsi generic sg1 type 5 |
| 608 | [ 1.447288] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray |
| 609 | [ 1.447296] cdrom: Uniform CD-ROM driver Revision: 3.20 |
| 610 | [ 1.447566] sr 4:0:0:0: Attached scsi CD-ROM sr0 |
| 611 | [ 1.461896] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 |
| 612 | [ 1.461900] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 613 | [ 1.462179] hub 2-1:1.0: USB hub found |
| 614 | [ 1.462268] hub 2-1:1.0: 8 ports detected |
| 615 | [ 1.565559] Refined TSC clocksource calibration: 2128.000 MHz. |
| 616 | [ 1.565569] Switching to clocksource tsc |
| 617 | [ 1.695265] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) |
| 618 | [ 1.733728] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd |
| 619 | [ 1.836235] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0083 |
| 620 | [ 1.836239] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 621 | [ 1.836241] usb 2-1.1: Product: Basic Optical Mouse |
| 622 | [ 1.836243] usb 2-1.1: Manufacturer: Microsoft |
| 623 | [ 1.905480] usb 2-1.5: new high-speed USB device number 4 using ehci_hcd |
| 624 | [ 1.979542] udevd[338]: starting version 175 |
| 625 | [ 2.051274] usb 2-1.5: New USB device found, idVendor=058f, idProduct=b002 |
| 626 | [ 2.051278] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 627 | [ 2.051281] usb 2-1.5: Product: 1.3M HD WebCam |
| 628 | [ 2.051283] usb 2-1.5: Manufacturer: AAB1K0D9J |
| 629 | [ 2.082292] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:21/PNP0C09:00/PNP0C0D:00/input/input1 |
| 630 | [ 2.083787] ACPI: Lid Switch [LID] |
| 631 | [ 2.083869] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 |
| 632 | [ 2.083875] ACPI: Power Button [PWRF] |
| 633 | [ 2.084693] ACPI: Requesting acpi_cpufreq |
| 634 | [ 2.096535] iTCO_vendor_support: vendor-support=0 |
| 635 | [ 2.098404] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 |
| 636 | [ 2.098500] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0560) |
| 637 | [ 2.099588] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) |
| 638 | [ 2.104179] intel ips 0000:00:1f.6: No CPUID match found. |
| 639 | [ 2.104182] intel ips 0000:00:1f.6: IPS not supported on this CPU |
| 640 | [ 2.111933] [drm] Initialized drm 1.1.0 20060810 |
| 641 | [ 2.119936] cfg80211: Calling CRDA to update world regulatory domain |
| 642 | [ 2.130410] input: PC Speaker as /devices/platform/pcspkr/input/input3 |
| 643 | [ 2.163729] ath9k 0000:03:00.0: setting latency timer to 64 |
| 644 | [ 2.250880] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X |
| 645 | [ 2.250925] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 |
| 646 | [ 2.255807] ath: EEPROM regdomain: 0x65 |
| 647 | [ 2.255809] ath: EEPROM indicates we should expect a direct regpair map |
| 648 | [ 2.255813] ath: Country alpha2 being used: 00 |
| 649 | [ 2.255814] ath: Regpair used: 0x65 |
| 650 | [ 2.261385] acpi device:06: registered as cooling_device2 |
| 651 | [ 2.261467] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4 |
| 652 | [ 2.261632] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) |
| 653 | [ 2.263150] ACPI: AC Adapter [AC] (on-line) |
| 654 | [ 2.281002] Linux media interface: v0.10 |
| 655 | [ 2.292826] cfg80211: World regulatory domain updated: |
| 656 | [ 2.292830] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) |
| 657 | [ 2.292833] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 658 | [ 2.292836] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 659 | [ 2.292838] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 660 | [ 2.292841] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 661 | [ 2.292843] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 662 | [ 2.524385] ACPI: Battery Slot [BAT0] (battery present) |
| 663 | [ 2.528043] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 |
| 664 | [ 2.532250] Linux video capture interface: v2.00 |
| 665 | [ 2.532969] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input6 |
| 666 | [ 2.533103] generic-usb 0003:045E:0083.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1.1/input0 |
| 667 | [ 2.533128] usbcore: registered new interface driver usbhid |
| 668 | [ 2.533130] usbhid: USB HID core driver |
| 669 | [ 2.537572] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' |
| 670 | [ 2.538113] Registered led device: ath9k-phy0 |
| 671 | [ 2.538124] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc900111a0000, irq=17 |
| 672 | [ 2.541132] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0 |
| 673 | [ 2.541357] input: HDA Intel HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 |
| 674 | [ 2.541682] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002) |
| 675 | [ 2.541947] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 |
| 676 | [ 2.542508] i915 0000:00:02.0: setting latency timer to 64 |
| 677 | [ 2.545052] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9 |
| 678 | [ 2.545126] usbcore: registered new interface driver uvcvideo |
| 679 | [ 2.545128] USB Video Class driver (1.1.1) |
| 680 | [ 2.570106] i915 0000:00:02.0: irq 45 for MSI/MSI-X |
| 681 | [ 2.570113] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). |
| 682 | [ 2.570115] [drm] Driver supports precise vblank timestamp query. |
| 683 | [ 2.570152] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem |
| 684 | [ 2.817657] fbcon: inteldrmfb (fb0) is primary device |
| 685 | [ 3.005914] Console: switching to colour frame buffer device 200x56 |
| 686 | [ 3.018842] fb0: inteldrmfb frame buffer device |
| 687 | [ 3.018846] drm: registered panic notifier |
| 688 | [ 3.018960] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 |
| 689 | [ 3.362134] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000 |
| 690 | [ 3.434973] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10 |
| 691 | [ 3.467752] EXT4-fs (sda6): re-mounted. Opts: (null) |
| 692 | [ 3.530604] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro |
| 693 | [ 3.565459] loop: module loaded |
| 694 | [ 4.163667] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! |
| 695 | [ 4.660689] RPC: Registered named UNIX socket transport module. |
| 696 | [ 4.660695] RPC: Registered udp transport module. |
| 697 | [ 4.660699] RPC: Registered tcp transport module. |
| 698 | [ 4.660703] RPC: Registered tcp NFSv4.1 backchannel transport module. |
| 699 | [ 4.669199] FS-Cache: Loaded |
| 700 | [ 4.683133] FS-Cache: Netfs 'nfs' registered for caching |
| 701 | [ 4.691746] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). |
| 702 | [ 5.363489] tg3 0000:02:00.0: irq 46 for MSI/MSI-X |
| 703 | [ 5.375478] ADDRCONF(NETDEV_UP): eth0: link is not ready |
| 704 | [ 5.432615] Bluetooth: Core ver 2.16 |
| 705 | [ 5.432635] NET: Registered protocol family 31 |
| 706 | [ 5.432636] Bluetooth: HCI device and connection manager initialized |
| 707 | [ 5.432639] Bluetooth: HCI socket layer initialized |
| 708 | [ 5.432641] Bluetooth: L2CAP socket layer initialized |
| 709 | [ 5.432646] Bluetooth: SCO socket layer initialized |
| 710 | [ 5.442387] Bluetooth: RFCOMM TTY layer initialized |
| 711 | [ 5.442392] Bluetooth: RFCOMM socket layer initialized |
| 712 | [ 5.442394] Bluetooth: RFCOMM ver 1.11 |
| 713 | [ 5.444524] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| 714 | [ 5.444527] Bluetooth: BNEP filters: protocol multicast |
| 715 | [ 5.511634] lp: driver loaded but no devices found |
| 716 | [ 5.551866] ppdev: user-space parallel port driver |
| 717 | [ 5.578782] ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 718 | [ 5.760890] tg3 0000:02:00.0: eth0: Link is down |
| 719 | [ 6.221260] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11 |
| 720 | [ 7.508610] wlan0: authenticate with 00:24:37:96:06:b0 (try 1) |
| 721 | [ 7.510459] wlan0: authenticated |
| 722 | [ 7.546192] wlan0: associate with 00:24:37:96:06:b0 (try 1) |
| 723 | [ 7.553215] wlan0: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=3) |
| 724 | [ 7.553223] wlan0: associated |
| 725 | [ 7.554478] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| 726 | [ 19.585940] wlan0: no IPv6 routers present |
| 727 | [ 706.280008] usb 2-1.1: USB disconnect, device number 3 |
| 728 | [ 707.759647] usb 2-1.2: new low-speed USB device number 5 using ehci_hcd |
| 729 | [ 707.858218] usb 2-1.2: New USB device found, idVendor=045e, idProduct=0083 |
| 730 | [ 707.858225] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 731 | [ 707.858231] usb 2-1.2: Product: Basic Optical Mouse |
| 732 | [ 707.858235] usb 2-1.2: Manufacturer: Microsoft |
| 733 | [ 707.861891] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12 |
| 734 | [ 707.862112] generic-usb 0003:045E:0083.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1.2/input0 |
| 735 | [ 709.606601] usb 2-1.2: USB disconnect, device number 5 |
| 736 | [ 716.168215] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd |
| 737 | [ 716.266766] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0083 |
| 738 | [ 716.266774] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 739 | [ 716.266780] usb 1-1.2: Product: Basic Optical Mouse |
| 740 | [ 716.266784] usb 1-1.2: Manufacturer: Microsoft |
| 741 | [ 716.270292] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13 |
| 742 | [ 716.270631] generic-usb 0003:045E:0083.0003: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-1.2/input0 |
| 743 | [ 717.925062] usb 1-1.2: USB disconnect, device number 3 |
| 744 | [ 893.001440] usb 2-1.2: new high-speed USB device number 6 using ehci_hcd |
| 745 | [ 893.104524] usb 2-1.2: New USB device found, idVendor=13fe, idProduct=4100 |
| 746 | [ 893.104531] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 747 | [ 893.104537] usb 2-1.2: Product: USB DISK 2.0 |
| 748 | [ 893.104541] usb 2-1.2: Manufacturer: |
| 749 | [ 893.104545] usb 2-1.2: SerialNumber: 0701392CAF3D5516 |
| 750 | [ 893.142772] Initializing USB Mass Storage driver... |
| 751 | [ 893.143235] scsi5 : usb-storage 2-1.2:1.0 |
| 752 | [ 893.143396] usbcore: registered new interface driver usb-storage |
| 753 | [ 893.143401] USB Mass Storage support registered. |
| 754 | [ 894.142644] scsi 5:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4 |
| 755 | [ 894.144315] sd 5:0:0:0: Attached scsi generic sg2 type 0 |
| 756 | [ 898.260349] sd 5:0:0:0: [sdb] 60604416 512-byte logical blocks: (31.0 GB/28.8 GiB) |
| 757 | [ 898.263227] sd 5:0:0:0: [sdb] Write Protect is off |
| 758 | [ 898.263231] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00 |
| 759 | [ 898.265009] sd 5:0:0:0: [sdb] No Caching mode page present |
| 760 | [ 898.265018] sd 5:0:0:0: [sdb] Assuming drive cache: write through |
| 761 | [ 898.274613] sd 5:0:0:0: [sdb] No Caching mode page present |
| 762 | [ 898.274620] sd 5:0:0:0: [sdb] Assuming drive cache: write through |
| 763 | [ 898.276149] sdb: sdb1 |
| 764 | [ 898.285850] sd 5:0:0:0: [sdb] No Caching mode page present |
| 765 | [ 898.285858] sd 5:0:0:0: [sdb] Assuming drive cache: write through |
| 766 | [ 898.285864] sd 5:0:0:0: [sdb] Attached SCSI removable disk |
| 767 | [ 900.045772] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! |
| 768 | [ 900.422285] usb 2-1.1: new low-speed USB device number 7 using ehci_hcd |
| 769 | [ 900.521383] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0083 |
| 770 | [ 900.521392] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 |
| 771 | [ 900.521398] usb 2-1.1: Product: Basic Optical Mouse |
| 772 | [ 900.521402] usb 2-1.1: Manufacturer: Microsoft |
| 773 | [ 900.525139] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input14 |
| 774 | [ 900.525436] generic-usb 0003:045E:0083.0004: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1.1/input0 |
| 775 | [ 903.313963] usb 2-1.2: USB disconnect, device number 6 |
| 776 | [ 903.319289] scsi 5:0:0:0: rejecting I/O to offline device |
| 777 | [ 903.319298] scsi 5:0:0:0: [sdb] killing request |
| 778 | [ 903.319570] scsi 5:0:0:0: [sdb] Unhandled error code |
| 779 | [ 903.319575] scsi 5:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK |
| 780 | [ 903.319583] scsi 5:0:0:0: [sdb] CDB: Read(10): 28 00 01 7a 04 00 00 00 01 00 |
| 781 | [ 903.319597] end_request: I/O error, dev sdb, sector 24773632 |
| 782 | [ 903.319614] scsi 5:0:0:0: rejecting I/O to offline device |
| 783 | [ 903.319618] scsi 5:0:0:0: killing request |
| 784 | [ 903.329583] FAT-fs (sdb1): unable to read inode block for updating (i_pos 525959) |
| 785 | [ 906.611696] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd |
| 786 | [ 906.714773] usb 1-1.2: New USB device found, idVendor=13fe, idProduct=4100 |
| 787 | [ 906.714781] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 788 | [ 906.714787] usb 1-1.2: Product: USB DISK 2.0 |
| 789 | [ 906.714791] usb 1-1.2: Manufacturer: |
| 790 | [ 906.714795] usb 1-1.2: SerialNumber: 0701392CAF3D5516 |
| 791 | [ 906.715396] scsi6 : usb-storage 1-1.2:1.0 |
| 792 | [ 907.716917] scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4 |
| 793 | [ 907.718632] sd 6:0:0:0: Attached scsi generic sg2 type 0 |
| 794 | [ 909.727123] usb 1-1.2: USB disconnect, device number 4 |
| 795 | [ 909.734492] sd 6:0:0:0: [sdb] READ CAPACITY failed |
| 796 | [ 909.734499] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK |
| 797 | [ 909.734507] sd 6:0:0:0: [sdb] Sense not available. |
| 798 | [ 909.734570] sd 6:0:0:0: [sdb] Write Protect is off |
| 799 | [ 909.734578] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00 |
| 800 | [ 909.734639] sd 6:0:0:0: [sdb] Asking for cache data failed |
| 801 | [ 909.734646] sd 6:0:0:0: [sdb] Assuming drive cache: write through |
| 802 | [ 909.735899] sd 6:0:0:0: [sdb] Attached SCSI removable disk |
| 803 | [ 921.533376] usb 1-1.6: new high-speed USB device number 5 using ehci_hcd |
| 804 | [ 921.626981] usb 1-1.6: New USB device found, idVendor=058f, idProduct=6366 |
| 805 | [ 921.626989] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 |
| 806 | [ 921.626995] usb 1-1.6: Product: Mass Storage Device |
| 807 | [ 921.626999] usb 1-1.6: Manufacturer: Generic |
| 808 | [ 921.627003] usb 1-1.6: SerialNumber: 058F63666433 |
| 809 | [ 921.628286] scsi7 : usb-storage 1-1.6:1.0 |
| 810 | [ 922.753824] scsi 7:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 |
| 811 | [ 922.755560] sd 7:0:0:0: Attached scsi generic sg2 type 0 |
| 812 | [ 923.397788] sd 7:0:0:0: [sdb] 124735488 512-byte logical blocks: (63.8 GB/59.4 GiB) |
| 813 | [ 923.398655] sd 7:0:0:0: [sdb] Write Protect is off |
| 814 | [ 923.398662] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00 |
| 815 | [ 923.399504] sd 7:0:0:0: [sdb] No Caching mode page present |
| 816 | [ 923.399512] sd 7:0:0:0: [sdb] Assuming drive cache: write through |
| 817 | [ 923.403629] sd 7:0:0:0: [sdb] No Caching mode page present |
| 818 | [ 923.403636] sd 7:0:0:0: [sdb] Assuming drive cache: write through |
| 819 | [ 923.415261] sdb: sdb1 |
| 820 | [ 923.418082] sd 7:0:0:0: [sdb] No Caching mode page present |
| 821 | [ 923.418090] sd 7:0:0:0: [sdb] Assuming drive cache: write through |
| 822 | [ 923.418096] sd 7:0:0:0: [sdb] Attached SCSI removable disk |
| 823 | [ 923.644473] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! |
| 824 | [ 927.130949] usb 1-1.6: USB disconnect, device number 5 |
| 825 | [ 1174.852601] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). |
| 826 | [ 1174.852610] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. |
| 827 | [ 1174.857399] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). |
| 828 | [ 1174.857407] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. |
| 829 | [ 1242.156371] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). |
| 830 | [ 1242.156379] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. |
| 831 | [ 1242.161283] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). |
| 832 | [ 1242.161291] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. |
| 833 | [ 1372.482865] wlan0: deauthenticating from 00:24:37:96:06:b0 by local choice (reason=3) |
| 834 | [ 1372.531532] cfg80211: Calling CRDA to update world regulatory domain |
| 835 | [ 1372.574719] cfg80211: World regulatory domain updated: |
| 836 | [ 1372.574723] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) |
| 837 | [ 1372.574727] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 838 | [ 1372.574729] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 839 | [ 1372.574732] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) |
| 840 | [ 1372.574734] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 841 | [ 1372.574737] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) |
| 842 | [ 1373.160142] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0). |
| 843 | [ 1373.160151] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. |
| 844 | [ 1373.164326] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0). |
| 845 | [ 1373.164332] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known. |
| 846 | [ 1373.600177] PM: Syncing filesystems ... done. |
| 847 | [ 1373.602215] PM: Preparing system for mem sleep |
| 848 | [ 1373.742670] Freezing user space processes ... (elapsed 0.01 seconds) done. |
| 849 | [ 1373.758454] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. |
| 850 | [ 1373.774444] PM: Entering mem sleep |
| 851 | [ 1373.774469] Suspending console(s) (use no_console_suspend to debug) |
| 852 | [ 1373.774853] sd 0:0:0:0: [sda] Synchronizing SCSI cache |
| 853 | [ 1373.776246] sd 0:0:0:0: [sda] Stopping disk |
| 854 | [ 1374.282262] PM: suspend of devices complete after 507.857 msecs |
| 855 | [ 1374.298371] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI |
| 856 | [ 1374.314257] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI |
| 857 | [ 1374.330266] PM: late suspend of devices complete after 48.016 msecs |
| 858 | [ 1374.330480] ACPI: Preparing to enter system sleep state S3 |
| 859 | [ 1374.330542] PM: Saving platform NVS memory |
| 860 | [ 1374.330544] Disabling non-boot CPUs ... |
| 861 | [ 1374.434177] CPU 1 is now offline |
| 862 | [ 1374.434765] Extended CMOS year: 2000 |
| 863 | [ 1374.434979] ACPI: Low-level resume complete |
| 864 | [ 1374.435030] PM: Restoring platform NVS memory |
| 865 | [ 1374.435316] Extended CMOS year: 2000 |
| 866 | [ 1374.435365] Enabling non-boot CPUs ... |
| 867 | [ 1374.435585] Booting Node 0 Processor 1 APIC 0x4 |
| 868 | [ 1374.435587] smpboot cpu 1: start_ip = 9a000 |
| 869 | [ 1374.446618] Calibrating delay loop (skipped) already calibrated this CPU |
| 870 | [ 1374.467036] NMI watchdog enabled, takes one hw-pmu counter. |
| 871 | [ 1374.467346] CPU1 is up |
| 872 | [ 1374.468433] ACPI: Waking up from system sleep state S3 |
| 873 | [ 1374.482679] pci 0000:00:16.0: Refused to change power state, currently in D3 |
| 874 | [ 1374.482817] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI |
| 875 | [ 1374.482981] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI |
| 876 | [ 1374.483462] PM: early resume of devices complete after 14.965 msecs |
| 877 | [ 1374.483558] i915 0000:00:02.0: setting latency timer to 64 |
| 878 | [ 1374.483649] ehci_hcd 0000:00:1a.0: setting latency timer to 64 |
| 879 | [ 1374.483680] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 |
| 880 | [ 1374.483718] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X |
| 881 | [ 1374.483780] ehci_hcd 0000:00:1d.0: setting latency timer to 64 |
| 882 | [ 1374.483799] pci 0000:00:1e.0: setting latency timer to 64 |
| 883 | [ 1374.483813] ahci 0000:00:1f.2: setting latency timer to 64 |
| 884 | [ 1374.514696] sd 0:0:0:0: [sda] Starting disk |
| 885 | [ 1374.762763] usb 2-1.5: reset high-speed USB device number 4 using ehci_hcd |
| 886 | [ 1374.814557] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) |
| 887 | [ 1374.814589] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) |
| 888 | [ 1374.816168] ata5.00: configured for UDMA/100 |
| 889 | [ 1374.816220] ata1.00: configured for UDMA/133 |
| 890 | [ 1374.896580] restoring control 00000000-0000-0000-0000-000000000101/0/2 |
| 891 | [ 1374.896585] restoring control 00000000-0000-0000-0000-000000000101/1/3 |
| 892 | [ 1374.896589] restoring control 00000000-0000-0000-0000-000000000101/2/6 |
| 893 | [ 1374.896593] restoring control 00000000-0000-0000-0000-000000000101/3/7 |
| 894 | [ 1375.014055] PM: resume of devices complete after 530.787 msecs |
| 895 | [ 1375.014130] PM: Finishing wakeup. |
| 896 | [ 1375.014132] Restarting tasks ... done. |
| 897 | [ 1375.016628] video LNXVIDEO:00: Restoring backlight state |
| 898 | [ 1375.377903] ADDRCONF(NETDEV_UP): wlan0: link is not ready |
| 899 | [ 1375.692300] tg3 0000:02:00.0: eth0: Link is down |
| 900 | [ 1377.281356] wlan0: authenticate with 00:24:37:96:06:b0 (try 1) |
| 901 | [ 1377.283253] wlan0: authenticated |
| 902 | [ 1377.307046] wlan0: associate with 00:24:37:96:06:b0 (try 1) |
| 903 | [ 1377.310281] wlan0: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=3) |
| 904 | [ 1377.310289] wlan0: associated |
| 905 | [ 1377.311031] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready |
| 906 | [ 1387.976978] wlan0: no IPv6 routers present |
| 907 | [ 1690.558207] tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex |
| 908 | [ 1690.558215] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX |
| 909 | [ 1690.559003] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready |
| 910 | [ 1701.244756] eth0: no IPv6 routers present |