Revert "lenovo/t400/4.5-1564-g6fa36c9c2c-dirty/2017-04-16T13_28_27Z"
This reverts commit e5454d36ca2f96e452a228db9a1485bff2e8f32e.
The commit in question deletes a lot of unrelated files, and needs to be
reverted.
diff --git a/packardbell/ms2290/4.0-6558-gb98ab4a/2014-08-01T17:32:20Z/kernel_log.txt b/packardbell/ms2290/4.0-6558-gb98ab4a/2014-08-01T17:32:20Z/kernel_log.txt
new file mode 100644
index 0000000..8966928
--- /dev/null
+++ b/packardbell/ms2290/4.0-6558-gb98ab4a/2014-08-01T17:32:20Z/kernel_log.txt
@@ -0,0 +1,910 @@
+[ 0.000000] Initializing cgroup subsys cpuset
+[ 0.000000] Initializing cgroup subsys cpu
+[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.51-1
+[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet
+[ 0.000000] BIOS-provided physical RAM map:
+[ 0.000000] BIOS-e820: 0000000000000000 - 0000000000001000 type 16
+[ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable)
+[ 0.000000] BIOS-e820: 00000000000a0000 - 0000000000100000 (reserved)
+[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6d6000 (usable)
+[ 0.000000] BIOS-e820: 00000000bf6d6000 - 00000000bf800000 type 16
+[ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved)
+[ 0.000000] BIOS-e820: 00000000c1c00000 - 00000000c4000000 (reserved)
+[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000f0000000 (reserved)
+[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fee00000 (reserved)
+[ 0.000000] BIOS-e820: 0000000100000000 - 0000000134000000 (usable)
+[ 0.000000] NX (Execute Disable) protection: active
+[ 0.000000] SMBIOS 2.7 present.
+[ 0.000000] DMI: Packard Bell EasyNote LM85/EasyNote LM85, BIOS 4.0-6558-gb98ab4a 08/02/2014
+[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
+[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
+[ 0.000000] No AGP bridge found
+[ 0.000000] last_pfn = 0x134000 max_arch_pfn = 0x400000000
+[ 0.000000] MTRR default type: write-back
+[ 0.000000] MTRR fixed ranges enabled:
+[ 0.000000] 00000-9FFFF write-back
+[ 0.000000] A0000-BFFFF uncachable
+[ 0.000000] C0000-FFFFF write-back
+[ 0.000000] MTRR variable ranges enabled:
+[ 0.000000] 0 base 0BF800000 mask FFF800000 uncachable
+[ 0.000000] 1 base 0C0000000 mask FF0000000 uncachable
+[ 0.000000] 2 base 0D0000000 mask FF0000000 write-combining
+[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
+[ 0.000000] 4 disabled
+[ 0.000000] 5 disabled
+[ 0.000000] 6 disabled
+[ 0.000000] 7 disabled
+[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
+[ 0.000000] last_pfn = 0xbf6d6 max_arch_pfn = 0x400000000
+[ 0.000000] initial memory mapped : 0 - 20000000
+[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
+[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6d6000
+[ 0.000000] 0000000000 - 00bf600000 page 2M
+[ 0.000000] 00bf600000 - 00bf6d6000 page 4k
+[ 0.000000] kernel direct mapping tables up to bf6d6000 @ 1fffb000-20000000
+[ 0.000000] init_memory_mapping: 0000000100000000-0000000134000000
+[ 0.000000] 0100000000 - 0134000000 page 2M
+[ 0.000000] kernel direct mapping tables up to 134000000 @ bf6d4000-bf6d6000
+[ 0.000000] RAMDISK: 36bfa000 - 375f5000
+[ 0.000000] ACPI: RSDP 00000000000f0000 00024 (v02 CORE )
+[ 0.000000] ACPI: XSDT 00000000bf7df0e0 0004C (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: HPET 00000000bf7df210 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: APIC 00000000bf7df250 00074 (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: MCFG 00000000bf7df2d0 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: FACP 00000000bf7e2740 000F4 (v03 CORE COREBOOT 00000000 CORE 00000000)
+[ 0.000000] ACPI: DSDT 00000000bf7df350 032EE (v03 COREv4 COREBOOT 20140108 INTL 20140724)
+[ 0.000000] ACPI: FACS 00000000bf7df310 00040
+[ 0.000000] ACPI: SSDT 00000000bf7e2840 00670 (v02 CORE COREBOOT 0000002A CORE 0000002A)
+[ 0.000000] ACPI: Local APIC address 0xfee00000
+[ 0.000000] No NUMA configuration found
+[ 0.000000] Faking a node at 0000000000000000-0000000134000000
+[ 0.000000] Initmem setup node 0 0000000000000000-0000000134000000
+[ 0.000000] NODE_DATA [0000000133ffb000 - 0000000133ffffff]
+[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88012f800000-ffff880132ffffff] on node 0
+[ 0.000000] Zone PFN ranges:
+[ 0.000000] DMA 0x00000010 -> 0x00001000
+[ 0.000000] DMA32 0x00001000 -> 0x00100000
+[ 0.000000] Normal 0x00100000 -> 0x00134000
+[ 0.000000] Movable zone start PFN for each node
+[ 0.000000] early_node_map[3] active PFN ranges
+[ 0.000000] 0: 0x00000010 -> 0x000000a0
+[ 0.000000] 0: 0x00000100 -> 0x000bf6d6
+[ 0.000000] 0: 0x00100000 -> 0x00134000
+[ 0.000000] On node 0 totalpages: 996966
+[ 0.000000] DMA zone: 56 pages used for memmap
+[ 0.000000] DMA zone: 6 pages reserved
+[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
+[ 0.000000] DMA32 zone: 14280 pages used for memmap
+[ 0.000000] DMA32 zone: 765710 pages, LIFO batch:31
+[ 0.000000] Normal zone: 2912 pages used for memmap
+[ 0.000000] Normal zone: 210080 pages, LIFO batch:31
+[ 0.000000] ACPI: PM-Timer IO Port: 0x508
+[ 0.000000] ACPI: Local APIC address 0xfee00000
+[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
+[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
+[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
+[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
+[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
+[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
+[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
+[ 0.000000] ACPI: IRQ0 used by override.
+[ 0.000000] ACPI: IRQ2 used by override.
+[ 0.000000] ACPI: IRQ9 used by override.
+[ 0.000000] Using ACPI (MADT) for SMP configuration information
+[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
+[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
+[ 0.000000] nr_irqs_gsi: 40
+[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000010000
+[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
+[ 0.000000] PM: Registered nosave memory: 00000000bf6d6000 - 00000000bf800000
+[ 0.000000] PM: Registered nosave memory: 00000000bf800000 - 00000000c0000000
+[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000c1c00000
+[ 0.000000] PM: Registered nosave memory: 00000000c1c00000 - 00000000c4000000
+[ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000d0000000
+[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000f0000000
+[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fed00000
+[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000
+[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 0000000100000000
+[ 0.000000] Allocating PCI resources starting at f0000000 (gap: f0000000:ed00000)
+[ 0.000000] Booting paravirtualized kernel on bare hardware
+[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
+[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880133c00000 s82944 r8192 d23552 u1048576
+[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
+[ 0.000000] pcpu-alloc: [0] 0 1
+[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 979712
+[ 0.000000] Policy zone: Normal
+[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=7d581789-2cdd-423e-9a8b-b89626891401 ro quiet
+[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
+[ 0.000000] Checking aperture...
+[ 0.000000] No AGP bridge found
+[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
+[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
+[ 0.000000] Memory: 3845492k/5046272k available (3426k kernel code, 1058408k absent, 142372k reserved, 3312k data, 576k init)
+[ 0.000000] Hierarchical RCU implementation.
+[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
+[ 0.000000] NR_IRQS:33024 nr_irqs:512 16
+[ 0.000000] Extended CMOS year: 2000
+[ 0.000000] Console: colour VGA+ 80x25
+[ 0.000000] console [tty0] enabled
+[ 0.000000] hpet clockevent registered
+[ 0.000000] Fast TSC calibration using PIT
+[ 0.004000] Detected 2128.014 MHz processor.
+[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.02 BogoMIPS (lpj=8512056)
+[ 0.000007] pid_max: default: 32768 minimum: 301
+[ 0.000047] Security Framework initialized
+[ 0.000052] AppArmor: AppArmor disabled by boot time parameter
+[ 0.000311] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
+[ 0.001296] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
+[ 0.001725] Mount-cache hash table entries: 256
+[ 0.001846] Initializing cgroup subsys cpuacct
+[ 0.001851] Initializing cgroup subsys memory
+[ 0.001862] Initializing cgroup subsys devices
+[ 0.001865] Initializing cgroup subsys freezer
+[ 0.001867] Initializing cgroup subsys net_cls
+[ 0.001870] Initializing cgroup subsys blkio
+[ 0.001876] Initializing cgroup subsys perf_event
+[ 0.001906] CPU: Physical Processor ID: 0
+[ 0.001907] CPU: Processor Core ID: 0
+[ 0.001913] mce: CPU supports 9 MCE banks
+[ 0.001925] CPU0: Thermal monitoring enabled (TM1)
+[ 0.001934] using mwait in idle threads.
+[ 0.002376] ACPI: Core revision 20110623
+[ 0.005472] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
+[ 0.045140] CPU0: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz stepping 05
+[ 0.151452] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
+[ 0.151460] ... version: 3
+[ 0.151462] ... bit width: 48
+[ 0.151463] ... generic registers: 4
+[ 0.151465] ... value mask: 0000ffffffffffff
+[ 0.151466] ... max period: 000000007fffffff
+[ 0.151468] ... fixed-purpose events: 3
+[ 0.151469] ... event mask: 000000070000000f
+[ 0.151627] NMI watchdog enabled, takes one hw-pmu counter.
+[ 0.151748] Booting Node 0, Processors #1 Ok.
+[ 0.151750] smpboot cpu 1: start_ip = 9a000
+[ 0.259519] NMI watchdog enabled, takes one hw-pmu counter.
+[ 0.259563] Brought up 2 CPUs
+[ 0.259565] Total of 2 processors activated (8511.94 BogoMIPS).
+[ 0.260900] devtmpfs: initialized
+[ 0.265155] print_constraints: dummy:
+[ 0.265218] NET: Registered protocol family 16
+[ 0.265324] ACPI: bus type pci registered
+[ 0.265395] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
+[ 0.265399] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
+[ 0.283420] PCI: Using configuration type 1 for base access
+[ 0.284171] bio: create slab <bio-0> at 0
+[ 0.284274] ACPI: Added _OSI(Module Device)
+[ 0.284276] ACPI: Added _OSI(Processor Device)
+[ 0.284279] ACPI: Added _OSI(3.0 _SCP Extensions)
+[ 0.284281] ACPI: Added _OSI(Processor Aggregator Device)
+[ 0.285148] ACPI: EC: Look up EC in DSDT
+[ 0.287700] ACPI: Interpreter enabled
+[ 0.287706] ACPI: (supports S0 S3 S4 S5)
+[ 0.287733] ACPI: Using IOAPIC for interrupt routing
+[ 0.294880] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
+[ 0.295000] ACPI: No dock devices found.
+[ 0.295001] HEST: Table not found.
+[ 0.295005] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
+[ 0.295126] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
+[ 0.295310] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
+[ 0.295313] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
+[ 0.295316] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
+[ 0.295318] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
+[ 0.295321] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
+[ 0.295323] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
+[ 0.295325] pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff]
+[ 0.295328] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
+[ 0.295330] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
+[ 0.295332] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
+[ 0.295335] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
+[ 0.295337] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
+[ 0.295339] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
+[ 0.295342] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
+[ 0.295344] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
+[ 0.295346] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
+[ 0.295349] pci_root PNP0A08:00: host bridge window [mem 0xc4000000-0xfebfffff]
+[ 0.295351] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
+[ 0.295369] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
+[ 0.295394] DMAR: Disabling batched IOTLB flush on Ironlake
+[ 0.295418] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
+[ 0.295452] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
+[ 0.295468] pci 0000:00:02.0: [8086:0046] type 0 class 0x000300
+[ 0.295479] pci 0000:00:02.0: reg 10: [mem 0xcf800000-0xcfbfffff 64bit]
+[ 0.295486] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
+[ 0.295491] pci 0000:00:02.0: reg 20: [io 0x1020-0x1027]
+[ 0.295556] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
+[ 0.295584] pci 0000:00:16.0: reg 10: [mem 0xcfe06100-0xcfe0610f 64bit]
+[ 0.295674] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
+[ 0.295711] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
+[ 0.295731] pci 0000:00:1a.0: reg 10: [mem 0xcfe05800-0xcfe05bff]
+[ 0.295815] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
+[ 0.295842] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
+[ 0.295856] pci 0000:00:1b.0: reg 10: [mem 0xcfe00000-0xcfe03fff 64bit]
+[ 0.295921] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
+[ 0.295943] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
+[ 0.296007] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
+[ 0.296031] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
+[ 0.296095] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
+[ 0.296132] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
+[ 0.296152] pci 0000:00:1d.0: reg 10: [mem 0xcfe05c00-0xcfe05fff]
+[ 0.296237] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
+[ 0.296260] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
+[ 0.296325] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
+[ 0.296449] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
+[ 0.296473] pci 0000:00:1f.2: reg 10: [io 0x1028-0x102f]
+[ 0.296483] pci 0000:00:1f.2: reg 14: [io 0x1038-0x103b]
+[ 0.296494] pci 0000:00:1f.2: reg 18: [io 0x1030-0x1037]
+[ 0.296504] pci 0000:00:1f.2: reg 1c: [io 0x103c-0x103f]
+[ 0.296514] pci 0000:00:1f.2: reg 20: [io 0x1000-0x101f]
+[ 0.296524] pci 0000:00:1f.2: reg 24: [mem 0xcfe05000-0xcfe057ff]
+[ 0.296584] pci 0000:00:1f.2: PME# supported from D3hot
+[ 0.296607] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
+[ 0.296622] pci 0000:00:1f.3: reg 10: [mem 0xcfe06000-0xcfe060ff 64bit]
+[ 0.296642] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
+[ 0.296680] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180
+[ 0.296703] pci 0000:00:1f.6: reg 10: [mem 0xcfe04000-0xcfe04fff 64bit]
+[ 0.296802] pci 0000:00:01.0: PCI bridge to [bus 01-01]
+[ 0.296896] pci 0000:02:00.0: [14e4:1692] type 0 class 0x000200
+[ 0.296923] pci 0000:02:00.0: reg 10: [mem 0xcfc00000-0xcfc0ffff 64bit]
+[ 0.297059] pci 0000:02:00.0: PME# supported from D3hot D3cold
+[ 0.297119] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
+[ 0.297125] pci 0000:00:1c.0: bridge window [mem 0xcfc00000-0xcfcfffff]
+[ 0.297194] pci 0000:03:00.0: [168c:002e] type 0 class 0x000280
+[ 0.297222] pci 0000:03:00.0: reg 10: [mem 0xcfd00000-0xcfd0ffff 64bit]
+[ 0.297355] pci 0000:03:00.0: supports D1
+[ 0.297357] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
+[ 0.297416] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
+[ 0.297422] pci 0000:00:1c.1: bridge window [mem 0xcfd00000-0xcfdfffff]
+[ 0.297484] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
+[ 0.297494] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
+[ 0.297497] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
+[ 0.297500] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
+[ 0.297502] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
+[ 0.297505] pci 0000:00:1e.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
+[ 0.297508] pci 0000:00:1e.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
+[ 0.297510] pci 0000:00:1e.0: bridge window [mem 0x000cc000-0x000cffff] (subtractive decode)
+[ 0.297513] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
+[ 0.297516] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
+[ 0.297519] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
+[ 0.297521] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
+[ 0.297524] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
+[ 0.297526] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
+[ 0.297529] pci 0000:00:1e.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
+[ 0.297532] pci 0000:00:1e.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
+[ 0.297534] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
+[ 0.297537] pci 0000:00:1e.0: bridge window [mem 0xc4000000-0xfebfffff] (subtractive decode)
+[ 0.297540] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
+[ 0.297558] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
+[ 0.297814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
+[ 0.298117] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
+[ 0.298484] pci0000:00: Requesting ACPI _OSC control (0x1d)
+[ 0.298529] pci0000:00: ACPI _OSC control (0x1d) granted
+[ 0.302030] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
+[ 0.302079] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600
+[ 0.302100] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600
+[ 0.302125] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600
+[ 0.302144] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600
+[ 0.302164] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600
+[ 0.302184] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600
+[ 0.302219] pci0000:ff: Requesting ACPI _OSC control (0x1d)
+[ 0.302222] pci0000:ff: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
+[ 0.302224] ACPI _OSC control for PCIe not granted, disabling ASPM
+[ 0.302523] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
+[ 0.302577] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
+[ 0.302629] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
+[ 0.302680] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
+[ 0.302731] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
+[ 0.302782] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
+[ 0.302834] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
+[ 0.302885] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
+[ 0.302999] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
+[ 0.303010] vgaarb: loaded
+[ 0.303011] vgaarb: bridge control possible 0000:00:02.0
+[ 0.303057] PCI: Using ACPI for IRQ routing
+[ 0.311734] PCI: pci_cache_line_size set to 64 bytes
+[ 0.311871] reserve RAM buffer: 00000000bf6d6000 - 00000000bfffffff
+[ 0.311995] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
+[ 0.312001] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
+[ 0.314020] Switching to clocksource hpet
+[ 0.315963] pnp: PnP ACPI init
+[ 0.315980] ACPI: bus type pnp registered
+[ 0.316072] pnp 00:00: [bus 00-ff]
+[ 0.316075] pnp 00:00: [io 0x0000-0x0cf7 window]
+[ 0.316078] pnp 00:00: [io 0x0cf8-0x0cff]
+[ 0.316080] pnp 00:00: [io 0x0d00-0xffff window]
+[ 0.316082] pnp 00:00: [mem 0x000a0000-0x000bffff window]
+[ 0.316084] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
+[ 0.316087] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
+[ 0.316089] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
+[ 0.316091] pnp 00:00: [mem 0x000cc000-0x000cffff window]
+[ 0.316093] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
+[ 0.316095] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
+[ 0.316097] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
+[ 0.316099] pnp 00:00: [mem 0x000dc000-0x000dffff window]
+[ 0.316102] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
+[ 0.316104] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
+[ 0.316106] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
+[ 0.316108] pnp 00:00: [mem 0x000ec000-0x000effff window]
+[ 0.316110] pnp 00:00: [mem 0x000f0000-0x000fffff window]
+[ 0.316112] pnp 00:00: [mem 0xc4000000-0xfebfffff window]
+[ 0.316114] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
+[ 0.316164] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
+[ 0.316186] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
+[ 0.316189] pnp 00:01: [mem 0xfed10000-0xfed17fff]
+[ 0.316191] pnp 00:01: [mem 0xfed18000-0xfed18fff]
+[ 0.316193] pnp 00:01: [mem 0xfed19000-0xfed19fff]
+[ 0.316195] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
+[ 0.316197] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
+[ 0.316201] pnp 00:01: [mem 0xfed40000-0xfed44fff]
+[ 0.316203] pnp 00:01: [mem 0xfed45000-0xfed8ffff]
+[ 0.316205] pnp 00:01: [mem 0x20000000-0x201fffff]
+[ 0.316207] pnp 00:01: [mem 0x40000000-0x401fffff]
+[ 0.316255] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
+[ 0.316258] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
+[ 0.316261] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
+[ 0.316264] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
+[ 0.316267] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
+[ 0.316270] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
+[ 0.316272] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
+[ 0.316276] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
+[ 0.316279] system 00:01: [mem 0x20000000-0x201fffff] could not be reserved
+[ 0.316282] system 00:01: [mem 0x40000000-0x401fffff] could not be reserved
+[ 0.316285] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
+[ 0.317488] pnp 00:02: [io 0x0000-0x001f]
+[ 0.317491] pnp 00:02: [io 0x0081-0x0091]
+[ 0.317493] pnp 00:02: [io 0x0093-0x009f]
+[ 0.317495] pnp 00:02: [io 0x00c0-0x00df]
+[ 0.317497] pnp 00:02: [dma 4]
+[ 0.317542] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
+[ 0.317553] pnp 00:03: [mem 0xff000000-0xffffffff]
+[ 0.317587] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
+[ 0.317674] pnp 00:04: [mem 0xfed00000-0xfed003ff]
+[ 0.317731] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
+[ 0.317735] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
+[ 0.317748] pnp 00:05: [io 0x00f0]
+[ 0.317758] pnp 00:05: [irq 13]
+[ 0.317796] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
+[ 0.317809] pnp 00:06: [io 0x002e-0x002f]
+[ 0.317811] pnp 00:06: [io 0x004e-0x004f]
+[ 0.317814] pnp 00:06: [io 0x0061]
+[ 0.317815] pnp 00:06: [io 0x0063]
+[ 0.317817] pnp 00:06: [io 0x0065]
+[ 0.317819] pnp 00:06: [io 0x0067]
+[ 0.317821] pnp 00:06: [io 0x0080]
+[ 0.317823] pnp 00:06: [io 0x0092]
+[ 0.317825] pnp 00:06: [io 0x00b2-0x00b3]
+[ 0.317826] pnp 00:06: [io 0x0500-0x057f]
+[ 0.317828] pnp 00:06: [io 0x0480-0x04bf]
+[ 0.317882] system 00:06: [io 0x0500-0x057f] has been reserved
+[ 0.317885] system 00:06: [io 0x0480-0x04bf] has been reserved
+[ 0.317888] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
+[ 0.317899] pnp 00:07: [io 0x0070-0x0077]
+[ 0.317934] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
+[ 0.317954] pnp 00:08: [io 0x0060]
+[ 0.317956] pnp 00:08: [io 0x0064]
+[ 0.317963] pnp 00:08: [irq 1]
+[ 0.318001] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
+[ 0.318030] pnp 00:09: [irq 12]
+[ 0.318069] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
+[ 0.318089] pnp 00:0a: [bus ff]
+[ 0.318126] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
+[ 0.318136] pnp: PnP ACPI: found 11 devices
+[ 0.318137] ACPI: ACPI bus type pnp unregistered
+[ 0.325048] PCI: max bus depth: 1 pci_try_num: 2
+[ 0.325077] pci 0000:00:01.0: PCI bridge to [bus 01-01]
+[ 0.325083] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
+[ 0.325088] pci 0000:00:1c.0: bridge window [mem 0xcfc00000-0xcfcfffff]
+[ 0.325096] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
+[ 0.325101] pci 0000:00:1c.1: bridge window [mem 0xcfd00000-0xcfdfffff]
+[ 0.325109] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
+[ 0.325132] pci 0000:00:01.0: setting latency timer to 64
+[ 0.325141] pci 0000:00:1c.0: setting latency timer to 64
+[ 0.325152] pci 0000:00:1c.1: setting latency timer to 64
+[ 0.325158] pci 0000:00:1e.0: setting latency timer to 64
+[ 0.325162] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
+[ 0.325165] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
+[ 0.325167] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
+[ 0.325169] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
+[ 0.325171] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
+[ 0.325173] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
+[ 0.325176] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
+[ 0.325178] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
+[ 0.325180] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
+[ 0.325182] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
+[ 0.325184] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
+[ 0.325186] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
+[ 0.325188] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
+[ 0.325190] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
+[ 0.325193] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
+[ 0.325195] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
+[ 0.325197] pci_bus 0000:00: resource 20 [mem 0xc4000000-0xfebfffff]
+[ 0.325199] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
+[ 0.325202] pci_bus 0000:02: resource 1 [mem 0xcfc00000-0xcfcfffff]
+[ 0.325204] pci_bus 0000:03: resource 1 [mem 0xcfd00000-0xcfdfffff]
+[ 0.325206] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
+[ 0.325208] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
+[ 0.325210] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
+[ 0.325213] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff]
+[ 0.325215] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff]
+[ 0.325217] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff]
+[ 0.325219] pci_bus 0000:04: resource 10 [mem 0x000cc000-0x000cffff]
+[ 0.325221] pci_bus 0000:04: resource 11 [mem 0x000d0000-0x000d3fff]
+[ 0.325223] pci_bus 0000:04: resource 12 [mem 0x000d4000-0x000d7fff]
+[ 0.325225] pci_bus 0000:04: resource 13 [mem 0x000d8000-0x000dbfff]
+[ 0.325227] pci_bus 0000:04: resource 14 [mem 0x000dc000-0x000dffff]
+[ 0.325229] pci_bus 0000:04: resource 15 [mem 0x000e0000-0x000e3fff]
+[ 0.325232] pci_bus 0000:04: resource 16 [mem 0x000e4000-0x000e7fff]
+[ 0.325234] pci_bus 0000:04: resource 17 [mem 0x000e8000-0x000ebfff]
+[ 0.325236] pci_bus 0000:04: resource 18 [mem 0x000ec000-0x000effff]
+[ 0.325238] pci_bus 0000:04: resource 19 [mem 0x000f0000-0x000fffff]
+[ 0.325240] pci_bus 0000:04: resource 20 [mem 0xc4000000-0xfebfffff]
+[ 0.325242] pci_bus 0000:04: resource 21 [mem 0xfed40000-0xfed44fff]
+[ 0.325299] NET: Registered protocol family 2
+[ 0.325432] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
+[ 0.326329] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
+[ 0.328088] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
+[ 0.328297] TCP: Hash tables configured (established 524288 bind 65536)
+[ 0.328300] TCP reno registered
+[ 0.328308] UDP hash table entries: 2048 (order: 4, 65536 bytes)
+[ 0.328330] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
+[ 0.328455] NET: Registered protocol family 1
+[ 0.328474] pci 0000:00:02.0: Boot video device
+[ 0.328631] PCI: CLS 64 bytes, default 64
+[ 0.328686] Unpacking initramfs...
+[ 0.565341] Freeing initrd memory: 10220k freed
+[ 0.567641] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
+[ 0.567647] Placing 64MB software IO TLB between ffff8800bb6d4000 - ffff8800bf6d4000
+[ 0.567649] software IO TLB at phys 0xbb6d4000 - 0xbf6d4000
+[ 0.568130] audit: initializing netlink socket (disabled)
+[ 0.568143] type=2000 audit(1406976023.440:1): initialized
+[ 0.584322] HugeTLB registered 2 MB page size, pre-allocated 0 pages
+[ 0.585172] VFS: Disk quotas dquot_6.5.2
+[ 0.585200] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
+[ 0.585270] msgmni has been set to 7530
+[ 0.585436] alg: No test for stdrng (krng)
+[ 0.585468] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
+[ 0.585472] io scheduler noop registered
+[ 0.585473] io scheduler deadline registered
+[ 0.585488] io scheduler cfq registered (default)
+[ 0.585581] pcieport 0000:00:01.0: setting latency timer to 64
+[ 0.585611] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
+[ 0.585677] pcieport 0000:00:1c.0: setting latency timer to 64
+[ 0.585712] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
+[ 0.585775] pcieport 0000:00:1c.1: setting latency timer to 64
+[ 0.585808] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
+[ 0.585898] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
+[ 0.585902] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
+[ 0.585933] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
+[ 0.585936] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
+[ 0.585940] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
+[ 0.585959] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
+[ 0.585962] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
+[ 0.585966] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
+[ 0.585984] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
+[ 0.586005] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
+[ 0.586007] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
+[ 0.586291] intel_idle: MWAIT substates: 0x120
+[ 0.586293] intel_idle: v0.4 model 0x25
+[ 0.586294] intel_idle: lapic_timer_reliable_states 0xffffffff
+[ 0.586329] ERST: Table is not found!
+[ 0.586331] GHES: HEST is not enabled!
+[ 0.586390] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
+[ 0.634314] Linux agpgart interface v0.103
+[ 0.634396] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
+[ 0.634459] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
+[ 0.634994] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
+[ 0.635157] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
+[ 0.635300] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
+[ 0.656229] serio: i8042 KBD port at 0x60,0x64 irq 1
+[ 0.656237] serio: i8042 AUX port at 0x60,0x64 irq 12
+[ 0.656372] mousedev: PS/2 mouse device common for all mice
+[ 0.658502] rtc_cmos 00:07: RTC can wake from S4
+[ 0.658625] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
+[ 0.658655] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
+[ 0.658698] cpuidle: using governor ladder
+[ 0.658736] cpuidle: using governor menu
+[ 0.658942] TCP cubic registered
+[ 0.659028] NET: Registered protocol family 10
+[ 0.659478] Mobile IPv6
+[ 0.659481] NET: Registered protocol family 17
+[ 0.659485] Registering the dns_resolver key type
+[ 0.659758] PM: Hibernation image not present or could not be loaded.
+[ 0.659771] registered taskstats version 1
+[ 0.660457] rtc_cmos 00:07: setting system clock to 2014-08-02 10:40:24 UTC (1406976024)
+[ 0.660499] Initializing network drop monitor service
+[ 0.661827] Freeing unused kernel memory: 576k freed
+[ 0.661950] Write protecting the kernel read-only data: 6144k
+[ 0.664813] Freeing unused kernel memory: 652k freed
+[ 0.667772] Freeing unused kernel memory: 688k freed
+[ 0.677472] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
+[ 0.682373] udevd[49]: starting version 175
+[ 0.708602] usbcore: registered new interface driver usbfs
+[ 0.708630] usbcore: registered new interface driver hub
+[ 0.711737] SCSI subsystem initialized
+[ 0.717514] tg3.c:v3.121 (November 2, 2011)
+[ 0.717570] tg3 0000:02:00.0: setting latency timer to 64
+[ 0.722798] usbcore: registered new device driver usb
+[ 0.723232] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
+[ 0.723284] ehci_hcd 0000:00:1a.0: setting latency timer to 64
+[ 0.723289] ehci_hcd 0000:00:1a.0: EHCI Host Controller
+[ 0.723315] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
+[ 0.723346] ehci_hcd 0000:00:1a.0: debug port 2
+[ 0.727234] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
+[ 0.728149] libata version 3.00 loaded.
+[ 0.750359] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xcfe05800
+[ 0.755564] tg3 mdio bus: probed
+[ 0.758273] thermal LNXTHERM:00: registered as thermal_zone0
+[ 0.758276] ACPI: Thermal Zone [THM0] (45 C)
+[ 0.765896] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 20:6a:8a:2f:fa:2c
+[ 0.765900] tg3 0000:02:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
+[ 0.765904] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
+[ 0.765907] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
+[ 0.766225] thermal LNXTHERM:01: registered as thermal_zone1
+[ 0.766228] ACPI: Thermal Zone [THM1] (27 C)
+[ 0.773895] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
+[ 0.773947] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
+[ 0.773954] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[ 0.773959] usb usb1: Product: EHCI Host Controller
+[ 0.773963] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
+[ 0.773968] usb usb1: SerialNumber: 0000:00:1a.0
+[ 0.774121] hub 1-0:1.0: USB hub found
+[ 0.774126] hub 1-0:1.0: 2 ports detected
+[ 0.774525] ahci 0000:00:1f.2: version 3.0
+[ 0.774628] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
+[ 0.774660] ahci: SSS flag set, parallel bus scan disabled
+[ 0.774687] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x11 impl SATA mode
+[ 0.774691] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
+[ 0.774696] ahci 0000:00:1f.2: setting latency timer to 64
+[ 0.775251] scsi0 : ahci
+[ 0.775422] scsi1 : ahci
+[ 0.775500] scsi2 : ahci
+[ 0.775568] scsi3 : ahci
+[ 0.775637] scsi4 : ahci
+[ 0.775742] ata1: SATA max UDMA/133 abar m2048@0xcfe05000 port 0xcfe05100 irq 43
+[ 0.775745] ata2: DUMMY
+[ 0.775746] ata3: DUMMY
+[ 0.775747] ata4: DUMMY
+[ 0.775750] ata5: SATA max UDMA/133 abar m2048@0xcfe05000 port 0xcfe05300 irq 43
+[ 0.775819] ehci_hcd 0000:00:1d.0: setting latency timer to 64
+[ 0.775824] ehci_hcd 0000:00:1d.0: EHCI Host Controller
+[ 0.775835] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
+[ 0.775868] ehci_hcd 0000:00:1d.0: debug port 2
+[ 0.779787] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
+[ 0.779937] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xcfe05c00
+[ 0.793888] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
+[ 0.793954] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
+[ 0.793961] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
+[ 0.793966] usb usb2: Product: EHCI Host Controller
+[ 0.793970] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
+[ 0.793975] usb usb2: SerialNumber: 0000:00:1d.0
+[ 0.794240] hub 2-0:1.0: USB hub found
+[ 0.794245] hub 2-0:1.0: 2 ports detected
+[ 1.085798] usb 1-1: new high-speed USB device number 2 using ehci_hcd
+[ 1.097770] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+[ 1.098569] ata1.00: ATA-8: SanDisk SDSSDH2256G, X211200, max UDMA/133
+[ 1.098577] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
+[ 1.099456] ata1.00: configured for UDMA/133
+[ 1.099773] scsi 0:0:0:0: Direct-Access ATA SanDisk SDSSDH22 X211 PQ: 0 ANSI: 5
+[ 1.218041] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
+[ 1.218048] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+[ 1.218545] hub 1-1:1.0: USB hub found
+[ 1.218651] hub 1-1:1.0: 6 ports detected
+[ 1.329661] usb 2-1: new high-speed USB device number 2 using ehci_hcd
+[ 1.417633] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
+[ 1.420673] ata5.00: ATAPI: Slimtype DVD A DS8A5SH, XA15, max UDMA/100
+[ 1.422026] ata5.00: configured for UDMA/100
+[ 1.428101] scsi 4:0:0:0: CD-ROM Slimtype DVD A DS8A5SH XA15 PQ: 0 ANSI: 5
+[ 1.432363] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
+[ 1.432445] sd 0:0:0:0: [sda] Write Protect is off
+[ 1.432449] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
+[ 1.432480] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
+[ 1.437686] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
+[ 1.438896] sd 0:0:0:0: [sda] Attached SCSI disk
+[ 1.440542] sd 0:0:0:0: Attached scsi generic sg0 type 0
+[ 1.440583] sr 4:0:0:0: Attached scsi generic sg1 type 5
+[ 1.447288] sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
+[ 1.447296] cdrom: Uniform CD-ROM driver Revision: 3.20
+[ 1.447566] sr 4:0:0:0: Attached scsi CD-ROM sr0
+[ 1.461896] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
+[ 1.461900] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
+[ 1.462179] hub 2-1:1.0: USB hub found
+[ 1.462268] hub 2-1:1.0: 8 ports detected
+[ 1.565559] Refined TSC clocksource calibration: 2128.000 MHz.
+[ 1.565569] Switching to clocksource tsc
+[ 1.695265] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
+[ 1.733728] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
+[ 1.836235] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0083
+[ 1.836239] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
+[ 1.836241] usb 2-1.1: Product: Basic Optical Mouse
+[ 1.836243] usb 2-1.1: Manufacturer: Microsoft
+[ 1.905480] usb 2-1.5: new high-speed USB device number 4 using ehci_hcd
+[ 1.979542] udevd[338]: starting version 175
+[ 2.051274] usb 2-1.5: New USB device found, idVendor=058f, idProduct=b002
+[ 2.051278] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
+[ 2.051281] usb 2-1.5: Product: 1.3M HD WebCam
+[ 2.051283] usb 2-1.5: Manufacturer: AAB1K0D9J
+[ 2.082292] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:21/PNP0C09:00/PNP0C0D:00/input/input1
+[ 2.083787] ACPI: Lid Switch [LID]
+[ 2.083869] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
+[ 2.083875] ACPI: Power Button [PWRF]
+[ 2.084693] ACPI: Requesting acpi_cpufreq
+[ 2.096535] iTCO_vendor_support: vendor-support=0
+[ 2.098404] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
+[ 2.098500] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0560)
+[ 2.099588] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
+[ 2.104179] intel ips 0000:00:1f.6: No CPUID match found.
+[ 2.104182] intel ips 0000:00:1f.6: IPS not supported on this CPU
+[ 2.111933] [drm] Initialized drm 1.1.0 20060810
+[ 2.119936] cfg80211: Calling CRDA to update world regulatory domain
+[ 2.130410] input: PC Speaker as /devices/platform/pcspkr/input/input3
+[ 2.163729] ath9k 0000:03:00.0: setting latency timer to 64
+[ 2.250880] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
+[ 2.250925] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
+[ 2.255807] ath: EEPROM regdomain: 0x65
+[ 2.255809] ath: EEPROM indicates we should expect a direct regpair map
+[ 2.255813] ath: Country alpha2 being used: 00
+[ 2.255814] ath: Regpair used: 0x65
+[ 2.261385] acpi device:06: registered as cooling_device2
+[ 2.261467] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
+[ 2.261632] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
+[ 2.263150] ACPI: AC Adapter [AC] (on-line)
+[ 2.281002] Linux media interface: v0.10
+[ 2.292826] cfg80211: World regulatory domain updated:
+[ 2.292830] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
+[ 2.292833] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
+[ 2.292836] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
+[ 2.292838] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
+[ 2.292841] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
+[ 2.292843] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
+[ 2.524385] ACPI: Battery Slot [BAT0] (battery present)
+[ 2.528043] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
+[ 2.532250] Linux video capture interface: v2.00
+[ 2.532969] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input6
+[ 2.533103] generic-usb 0003:045E:0083.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1.1/input0
+[ 2.533128] usbcore: registered new interface driver usbhid
+[ 2.533130] usbhid: USB HID core driver
+[ 2.537572] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
+[ 2.538113] Registered led device: ath9k-phy0
+[ 2.538124] ieee80211 phy0: Atheros AR9287 Rev:2 mem=0xffffc900111a0000, irq=17
+[ 2.541132] HDMI status: Codec=3 Pin=4 Presence_Detect=0 ELD_Valid=0
+[ 2.541357] input: HDA Intel HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
+[ 2.541682] uvcvideo: Found UVC 1.00 device 1.3M HD WebCam (058f:b002)
+[ 2.541947] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
+[ 2.542508] i915 0000:00:02.0: setting latency timer to 64
+[ 2.545052] input: 1.3M HD WebCam as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input9
+[ 2.545126] usbcore: registered new interface driver uvcvideo
+[ 2.545128] USB Video Class driver (1.1.1)
+[ 2.570106] i915 0000:00:02.0: irq 45 for MSI/MSI-X
+[ 2.570113] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
+[ 2.570115] [drm] Driver supports precise vblank timestamp query.
+[ 2.570152] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
+[ 2.817657] fbcon: inteldrmfb (fb0) is primary device
+[ 3.005914] Console: switching to colour frame buffer device 200x56
+[ 3.018842] fb0: inteldrmfb frame buffer device
+[ 3.018846] drm: registered panic notifier
+[ 3.018960] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
+[ 3.362134] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa44000/0xa0000
+[ 3.434973] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
+[ 3.467752] EXT4-fs (sda6): re-mounted. Opts: (null)
+[ 3.530604] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
+[ 3.565459] loop: module loaded
+[ 4.163667] FAT-fs (sda5): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
+[ 4.660689] RPC: Registered named UNIX socket transport module.
+[ 4.660695] RPC: Registered udp transport module.
+[ 4.660699] RPC: Registered tcp transport module.
+[ 4.660703] RPC: Registered tcp NFSv4.1 backchannel transport module.
+[ 4.669199] FS-Cache: Loaded
+[ 4.683133] FS-Cache: Netfs 'nfs' registered for caching
+[ 4.691746] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
+[ 5.363489] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
+[ 5.375478] ADDRCONF(NETDEV_UP): eth0: link is not ready
+[ 5.432615] Bluetooth: Core ver 2.16
+[ 5.432635] NET: Registered protocol family 31
+[ 5.432636] Bluetooth: HCI device and connection manager initialized
+[ 5.432639] Bluetooth: HCI socket layer initialized
+[ 5.432641] Bluetooth: L2CAP socket layer initialized
+[ 5.432646] Bluetooth: SCO socket layer initialized
+[ 5.442387] Bluetooth: RFCOMM TTY layer initialized
+[ 5.442392] Bluetooth: RFCOMM socket layer initialized
+[ 5.442394] Bluetooth: RFCOMM ver 1.11
+[ 5.444524] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
+[ 5.444527] Bluetooth: BNEP filters: protocol multicast
+[ 5.511634] lp: driver loaded but no devices found
+[ 5.551866] ppdev: user-space parallel port driver
+[ 5.578782] ADDRCONF(NETDEV_UP): wlan0: link is not ready
+[ 5.760890] tg3 0000:02:00.0: eth0: Link is down
+[ 6.221260] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
+[ 7.508610] wlan0: authenticate with 00:24:37:96:06:b0 (try 1)
+[ 7.510459] wlan0: authenticated
+[ 7.546192] wlan0: associate with 00:24:37:96:06:b0 (try 1)
+[ 7.553215] wlan0: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=3)
+[ 7.553223] wlan0: associated
+[ 7.554478] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
+[ 19.585940] wlan0: no IPv6 routers present
+[ 706.280008] usb 2-1.1: USB disconnect, device number 3
+[ 707.759647] usb 2-1.2: new low-speed USB device number 5 using ehci_hcd
+[ 707.858218] usb 2-1.2: New USB device found, idVendor=045e, idProduct=0083
+[ 707.858225] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
+[ 707.858231] usb 2-1.2: Product: Basic Optical Mouse
+[ 707.858235] usb 2-1.2: Manufacturer: Microsoft
+[ 707.861891] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
+[ 707.862112] generic-usb 0003:045E:0083.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1.2/input0
+[ 709.606601] usb 2-1.2: USB disconnect, device number 5
+[ 716.168215] usb 1-1.2: new low-speed USB device number 3 using ehci_hcd
+[ 716.266766] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0083
+[ 716.266774] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
+[ 716.266780] usb 1-1.2: Product: Basic Optical Mouse
+[ 716.266784] usb 1-1.2: Manufacturer: Microsoft
+[ 716.270292] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13
+[ 716.270631] generic-usb 0003:045E:0083.0003: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1a.0-1.2/input0
+[ 717.925062] usb 1-1.2: USB disconnect, device number 3
+[ 893.001440] usb 2-1.2: new high-speed USB device number 6 using ehci_hcd
+[ 893.104524] usb 2-1.2: New USB device found, idVendor=13fe, idProduct=4100
+[ 893.104531] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[ 893.104537] usb 2-1.2: Product: USB DISK 2.0
+[ 893.104541] usb 2-1.2: Manufacturer:
+[ 893.104545] usb 2-1.2: SerialNumber: 0701392CAF3D5516
+[ 893.142772] Initializing USB Mass Storage driver...
+[ 893.143235] scsi5 : usb-storage 2-1.2:1.0
+[ 893.143396] usbcore: registered new interface driver usb-storage
+[ 893.143401] USB Mass Storage support registered.
+[ 894.142644] scsi 5:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
+[ 894.144315] sd 5:0:0:0: Attached scsi generic sg2 type 0
+[ 898.260349] sd 5:0:0:0: [sdb] 60604416 512-byte logical blocks: (31.0 GB/28.8 GiB)
+[ 898.263227] sd 5:0:0:0: [sdb] Write Protect is off
+[ 898.263231] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
+[ 898.265009] sd 5:0:0:0: [sdb] No Caching mode page present
+[ 898.265018] sd 5:0:0:0: [sdb] Assuming drive cache: write through
+[ 898.274613] sd 5:0:0:0: [sdb] No Caching mode page present
+[ 898.274620] sd 5:0:0:0: [sdb] Assuming drive cache: write through
+[ 898.276149] sdb: sdb1
+[ 898.285850] sd 5:0:0:0: [sdb] No Caching mode page present
+[ 898.285858] sd 5:0:0:0: [sdb] Assuming drive cache: write through
+[ 898.285864] sd 5:0:0:0: [sdb] Attached SCSI removable disk
+[ 900.045772] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
+[ 900.422285] usb 2-1.1: new low-speed USB device number 7 using ehci_hcd
+[ 900.521383] usb 2-1.1: New USB device found, idVendor=045e, idProduct=0083
+[ 900.521392] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
+[ 900.521398] usb 2-1.1: Product: Basic Optical Mouse
+[ 900.521402] usb 2-1.1: Manufacturer: Microsoft
+[ 900.525139] input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input14
+[ 900.525436] generic-usb 0003:045E:0083.0004: input,hidraw0: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:1d.0-1.1/input0
+[ 903.313963] usb 2-1.2: USB disconnect, device number 6
+[ 903.319289] scsi 5:0:0:0: rejecting I/O to offline device
+[ 903.319298] scsi 5:0:0:0: [sdb] killing request
+[ 903.319570] scsi 5:0:0:0: [sdb] Unhandled error code
+[ 903.319575] scsi 5:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
+[ 903.319583] scsi 5:0:0:0: [sdb] CDB: Read(10): 28 00 01 7a 04 00 00 00 01 00
+[ 903.319597] end_request: I/O error, dev sdb, sector 24773632
+[ 903.319614] scsi 5:0:0:0: rejecting I/O to offline device
+[ 903.319618] scsi 5:0:0:0: killing request
+[ 903.329583] FAT-fs (sdb1): unable to read inode block for updating (i_pos 525959)
+[ 906.611696] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
+[ 906.714773] usb 1-1.2: New USB device found, idVendor=13fe, idProduct=4100
+[ 906.714781] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[ 906.714787] usb 1-1.2: Product: USB DISK 2.0
+[ 906.714791] usb 1-1.2: Manufacturer:
+[ 906.714795] usb 1-1.2: SerialNumber: 0701392CAF3D5516
+[ 906.715396] scsi6 : usb-storage 1-1.2:1.0
+[ 907.716917] scsi 6:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
+[ 907.718632] sd 6:0:0:0: Attached scsi generic sg2 type 0
+[ 909.727123] usb 1-1.2: USB disconnect, device number 4
+[ 909.734492] sd 6:0:0:0: [sdb] READ CAPACITY failed
+[ 909.734499] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
+[ 909.734507] sd 6:0:0:0: [sdb] Sense not available.
+[ 909.734570] sd 6:0:0:0: [sdb] Write Protect is off
+[ 909.734578] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00
+[ 909.734639] sd 6:0:0:0: [sdb] Asking for cache data failed
+[ 909.734646] sd 6:0:0:0: [sdb] Assuming drive cache: write through
+[ 909.735899] sd 6:0:0:0: [sdb] Attached SCSI removable disk
+[ 921.533376] usb 1-1.6: new high-speed USB device number 5 using ehci_hcd
+[ 921.626981] usb 1-1.6: New USB device found, idVendor=058f, idProduct=6366
+[ 921.626989] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
+[ 921.626995] usb 1-1.6: Product: Mass Storage Device
+[ 921.626999] usb 1-1.6: Manufacturer: Generic
+[ 921.627003] usb 1-1.6: SerialNumber: 058F63666433
+[ 921.628286] scsi7 : usb-storage 1-1.6:1.0
+[ 922.753824] scsi 7:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
+[ 922.755560] sd 7:0:0:0: Attached scsi generic sg2 type 0
+[ 923.397788] sd 7:0:0:0: [sdb] 124735488 512-byte logical blocks: (63.8 GB/59.4 GiB)
+[ 923.398655] sd 7:0:0:0: [sdb] Write Protect is off
+[ 923.398662] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
+[ 923.399504] sd 7:0:0:0: [sdb] No Caching mode page present
+[ 923.399512] sd 7:0:0:0: [sdb] Assuming drive cache: write through
+[ 923.403629] sd 7:0:0:0: [sdb] No Caching mode page present
+[ 923.403636] sd 7:0:0:0: [sdb] Assuming drive cache: write through
+[ 923.415261] sdb: sdb1
+[ 923.418082] sd 7:0:0:0: [sdb] No Caching mode page present
+[ 923.418090] sd 7:0:0:0: [sdb] Assuming drive cache: write through
+[ 923.418096] sd 7:0:0:0: [sdb] Attached SCSI removable disk
+[ 923.644473] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
+[ 927.130949] usb 1-1.6: USB disconnect, device number 5
+[ 1174.852601] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
+[ 1174.852610] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
+[ 1174.857399] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
+[ 1174.857407] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
+[ 1242.156371] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
+[ 1242.156379] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
+[ 1242.161283] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
+[ 1242.161291] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
+[ 1372.482865] wlan0: deauthenticating from 00:24:37:96:06:b0 by local choice (reason=3)
+[ 1372.531532] cfg80211: Calling CRDA to update world regulatory domain
+[ 1372.574719] cfg80211: World regulatory domain updated:
+[ 1372.574723] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
+[ 1372.574727] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
+[ 1372.574729] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
+[ 1372.574732] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
+[ 1372.574734] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
+[ 1372.574737] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
+[ 1373.160142] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
+[ 1373.160151] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
+[ 1373.164326] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
+[ 1373.164332] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
+[ 1373.600177] PM: Syncing filesystems ... done.
+[ 1373.602215] PM: Preparing system for mem sleep
+[ 1373.742670] Freezing user space processes ... (elapsed 0.01 seconds) done.
+[ 1373.758454] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
+[ 1373.774444] PM: Entering mem sleep
+[ 1373.774469] Suspending console(s) (use no_console_suspend to debug)
+[ 1373.774853] sd 0:0:0:0: [sda] Synchronizing SCSI cache
+[ 1373.776246] sd 0:0:0:0: [sda] Stopping disk
+[ 1374.282262] PM: suspend of devices complete after 507.857 msecs
+[ 1374.298371] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
+[ 1374.314257] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
+[ 1374.330266] PM: late suspend of devices complete after 48.016 msecs
+[ 1374.330480] ACPI: Preparing to enter system sleep state S3
+[ 1374.330542] PM: Saving platform NVS memory
+[ 1374.330544] Disabling non-boot CPUs ...
+[ 1374.434177] CPU 1 is now offline
+[ 1374.434765] Extended CMOS year: 2000
+[ 1374.434979] ACPI: Low-level resume complete
+[ 1374.435030] PM: Restoring platform NVS memory
+[ 1374.435316] Extended CMOS year: 2000
+[ 1374.435365] Enabling non-boot CPUs ...
+[ 1374.435585] Booting Node 0 Processor 1 APIC 0x4
+[ 1374.435587] smpboot cpu 1: start_ip = 9a000
+[ 1374.446618] Calibrating delay loop (skipped) already calibrated this CPU
+[ 1374.467036] NMI watchdog enabled, takes one hw-pmu counter.
+[ 1374.467346] CPU1 is up
+[ 1374.468433] ACPI: Waking up from system sleep state S3
+[ 1374.482679] pci 0000:00:16.0: Refused to change power state, currently in D3
+[ 1374.482817] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
+[ 1374.482981] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
+[ 1374.483462] PM: early resume of devices complete after 14.965 msecs
+[ 1374.483558] i915 0000:00:02.0: setting latency timer to 64
+[ 1374.483649] ehci_hcd 0000:00:1a.0: setting latency timer to 64
+[ 1374.483680] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
+[ 1374.483718] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
+[ 1374.483780] ehci_hcd 0000:00:1d.0: setting latency timer to 64
+[ 1374.483799] pci 0000:00:1e.0: setting latency timer to 64
+[ 1374.483813] ahci 0000:00:1f.2: setting latency timer to 64
+[ 1374.514696] sd 0:0:0:0: [sda] Starting disk
+[ 1374.762763] usb 2-1.5: reset high-speed USB device number 4 using ehci_hcd
+[ 1374.814557] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
+[ 1374.814589] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
+[ 1374.816168] ata5.00: configured for UDMA/100
+[ 1374.816220] ata1.00: configured for UDMA/133
+[ 1374.896580] restoring control 00000000-0000-0000-0000-000000000101/0/2
+[ 1374.896585] restoring control 00000000-0000-0000-0000-000000000101/1/3
+[ 1374.896589] restoring control 00000000-0000-0000-0000-000000000101/2/6
+[ 1374.896593] restoring control 00000000-0000-0000-0000-000000000101/3/7
+[ 1375.014055] PM: resume of devices complete after 530.787 msecs
+[ 1375.014130] PM: Finishing wakeup.
+[ 1375.014132] Restarting tasks ... done.
+[ 1375.016628] video LNXVIDEO:00: Restoring backlight state
+[ 1375.377903] ADDRCONF(NETDEV_UP): wlan0: link is not ready
+[ 1375.692300] tg3 0000:02:00.0: eth0: Link is down
+[ 1377.281356] wlan0: authenticate with 00:24:37:96:06:b0 (try 1)
+[ 1377.283253] wlan0: authenticated
+[ 1377.307046] wlan0: associate with 00:24:37:96:06:b0 (try 1)
+[ 1377.310281] wlan0: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=3)
+[ 1377.310289] wlan0: associated
+[ 1377.311031] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
+[ 1387.976978] wlan0: no IPv6 routers present
+[ 1690.558207] tg3 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex
+[ 1690.558215] tg3 0000:02:00.0: eth0: Flow control is on for TX and on for RX
+[ 1690.559003] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
+[ 1701.244756] eth0: no IPv6 routers present