blob: 4c437c8a848713e31731f786f8ffe1bf395dd43c [file] [log] [blame]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12-rc7-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-9) ) #1 SMP Debian 3.12~rc7-1~exp1 (2013-10-28)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12-rc7-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acecffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aced0000-0x00000000acffffff] type 16
[ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 2325TLU, BIOS CBET4000 coreboot 01/22/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x44e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0AD000000 mask FFF000000 uncachable
[ 0.000000] 1 base 0AE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0C0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0F0000000 mask FF8000000 uncachable
[ 0.000000] 6 base 0F8000000 mask FFC000000 uncachable
[ 0.000000] 7 base 0FC000000 mask FFE000000 uncachable
[ 0.000000] 8 base 0FE000000 mask FFF000000 uncachable
[ 0.000000] 9 base 0FF000000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xaced0 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01a8b000, 0x01a8bfff] PGTABLE
[ 0.000000] BRK [0x01a8c000, 0x01a8cfff] PGTABLE
[ 0.000000] BRK [0x01a8d000, 0x01a8dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x44e400000-0x44e5fffff]
[ 0.000000] [mem 0x44e400000-0x44e5fffff] page 2M
[ 0.000000] BRK [0x01a8e000, 0x01a8efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x44c000000-0x44e3fffff]
[ 0.000000] [mem 0x44c000000-0x44e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x44bffffff]
[ 0.000000] [mem 0x400000000-0x44bffffff] page 2M
[ 0.000000] BRK [0x01a8f000, 0x01a8ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xacecffff]
[ 0.000000] [mem 0x40200000-0xacdfffff] page 2M
[ 0.000000] [mem 0xace00000-0xacecffff] page 4k
[ 0.000000] BRK [0x01a90000, 0x01a90fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x3615a000-0x370a4fff]
[ 0.000000] ACPI: RSDP 00000000000f0000 00024 (v02 CORE )
[ 0.000000] ACPI: XSDT 00000000acee08e0 0004C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 00000000acee3f70 000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
[ 0.000000] ACPI: DSDT 00000000acee0a50 0351A (v02 COREv4 COREBOOT 20110725 INTL 20131218)
[ 0.000000] ACPI: FACS 00000000acee0a10 00040
[ 0.000000] ACPI: HPET 00000000acee4070 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 00000000acee40b0 0006C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: MCFG 00000000acee4120 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 00000000acee5020 0122C (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000044e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x44e5fffff]
[ 0.000000] NODE_DATA [mem 0x44e5ee000-0x44e5f1fff]
[ 0.000000] [ffffea0000000000-ffffea000f1fffff] PMD -> [ffff88043dc00000-ffff88044bdfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x44e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xacecffff]
[ 0.000000] node 0: [mem 0x100000000-0x44e5fffff]
[ 0.000000] On node 0 totalpages: 4173935
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9614 pages used for memmap
[ 0.000000] DMA32 zone: 703184 pages, LIFO batch:31
[ 0.000000] Normal zone: 47397 pages used for memmap
[ 0.000000] Normal zone: 3466752 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xaced0000-0xacffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[ 0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88044e200000 s85888 r8192 d20608 u524288
[ 0.000000] pcpu-alloc: s85888 r8192 d20608 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4116846
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-rc7-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16370920K/16695740K available (4703K kernel code, 666K rwdata, 1592K rodata, 972K init, 932K bss, 324820K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2793.525 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.05 BogoMIPS (lpj=11174100)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000023] Security Framework initialized
[ 0.000027] AppArmor: AppArmor disabled by boot time parameter
[ 0.000027] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000752] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.004249] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.005834] Mount-cache hash table entries: 256
[ 0.005969] Initializing cgroup subsys memory
[ 0.005979] Initializing cgroup subsys devices
[ 0.005980] Initializing cgroup subsys freezer
[ 0.005981] Initializing cgroup subsys net_cls
[ 0.005983] Initializing cgroup subsys blkio
[ 0.005984] Initializing cgroup subsys perf_event
[ 0.006004] CPU: Physical Processor ID: 0
[ 0.006004] CPU: Processor Core ID: 0
[ 0.006325] mce: CPU supports 7 MCE banks
[ 0.006334] CPU0: Thermal monitoring enabled (TM1)
[ 0.006343] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.006343] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.006343] tlb_flushall_shift: 1
[ 0.006440] Freeing SMP alternatives memory: 20K (ffffffff8199b000 - ffffffff819a0000)
[ 0.007318] ACPI: Core revision 20130725
[ 0.008965] ACPI: All ACPI Tables successfully acquired
[ 0.009620] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049351] smpboot: CPU0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
[ 0.049358] TSC deadline timer enabled
[ 0.049365] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.049370] ... version: 3
[ 0.049371] ... bit width: 48
[ 0.049371] ... generic registers: 4
[ 0.049372] ... value mask: 0000ffffffffffff
[ 0.049373] ... max period: 0000ffffffffffff
[ 0.049374] ... fixed-purpose events: 3
[ 0.049374] ... event mask: 000000070000000f
[ 0.062966] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.049557] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
[ 0.090047] Brought up 4 CPUs
[ 0.090050] smpboot: Total of 4 processors activated (22348.20 BogoMIPS)
[ 0.092837] devtmpfs: initialized
[ 0.095722] NET: Registered protocol family 16
[ 0.095791] cpuidle: using governor ladder
[ 0.095792] cpuidle: using governor menu
[ 0.095801] ACPI: bus type PCI registered
[ 0.095802] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.095848] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.095850] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.099601] PCI: Using configuration type 1 for base access
[ 0.100149] bio: create slab <bio-0> at 0
[ 0.100235] ACPI: Added _OSI(Module Device)
[ 0.100236] ACPI: Added _OSI(Processor Device)
[ 0.100237] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.100238] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.100772] ACPI: EC: Look up EC in DSDT
[ 0.102450] ACPI: Interpreter enabled
[ 0.102454] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.102458] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.102467] ACPI: (supports S0 S3 S4 S5)
[ 0.102468] ACPI: Using IOAPIC for interrupt routing
[ 0.102488] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.102558] ACPI: No dock devices found.
[ 0.106258] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.106288] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.106312] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.106389] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.106440] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
[ 0.106511] PCI host bridge to bus 0000:00
[ 0.106513] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.106515] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.106516] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.106518] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.106519] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.106520] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.106521] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.106523] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.106524] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.106525] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.106526] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.106528] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.106529] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.106530] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.106532] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.106533] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.106534] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.106535] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
[ 0.106537] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.106543] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.106611] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.106620] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.106625] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.106629] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
[ 0.106704] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.106725] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
[ 0.106793] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.106824] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.106853] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.106874] pci 0000:00:16.0: reg 0x10: [mem 0xe0636100-0xe063610f 64bit]
[ 0.106948] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.107009] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.107026] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
[ 0.107035] pci 0000:00:19.0: reg 0x14: [mem 0xe0634000-0xe0634fff]
[ 0.107043] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
[ 0.107103] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.107157] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.107177] pci 0000:00:1a.0: reg 0x10: [mem 0xe0635800-0xe0635bff]
[ 0.107263] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.107293] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.107322] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.107336] pci 0000:00:1b.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit]
[ 0.107401] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.107432] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.107464] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.107591] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.107660] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.107787] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.107856] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[ 0.107975] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.108049] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.108069] pci 0000:00:1d.0: reg 0x10: [mem 0xe0635c00-0xe0635fff]
[ 0.108155] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.108187] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.108215] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[ 0.108366] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.108385] pci 0000:00:1f.2: reg 0x10: [io 0x1880-0x1887]
[ 0.108393] pci 0000:00:1f.2: reg 0x14: [io 0x1890-0x1893]
[ 0.108401] pci 0000:00:1f.2: reg 0x18: [io 0x1888-0x188f]
[ 0.108409] pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897]
[ 0.108418] pci 0000:00:1f.2: reg 0x20: [io 0x1860-0x187f]
[ 0.108426] pci 0000:00:1f.2: reg 0x24: [mem 0xe0635000-0xe06357ff]
[ 0.108473] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.108522] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.108537] pci 0000:00:1f.3: reg 0x10: [mem 0xe0636000-0xe06360ff 64bit]
[ 0.108557] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.108740] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
[ 0.108766] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.108786] pci 0000:01:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.108787] pci 0000:01:00.0: MMC cards are now supported by standard SDHCI controller
[ 0.108821] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe04000ff]
[ 0.109096] pci 0000:01:00.0: supports D1 D2
[ 0.109097] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.109203] pci 0000:01:00.1: [1180:e232] type 00 class 0x088000
[ 0.109239] pci 0000:01:00.1: reg 0x10: [mem 0xe0400100-0xe04001ff]
[ 0.109511] pci 0000:01:00.1: supports D1 D2
[ 0.109512] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.116736] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.116748] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.116997] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
[ 0.117147] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0501fff 64bit]
[ 0.117856] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.128844] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.128853] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
[ 0.128946] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.129127] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.129168] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[ 0.129206] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.129243] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
[ 0.129280] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.129317] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.129354] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.129391] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.129745] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.129768] Found 1 acpi root devices
[ 0.129801] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.129861] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.129864] vgaarb: loaded
[ 0.129865] vgaarb: bridge control possible 0000:00:02.0
[ 0.129893] PCI: Using ACPI for IRQ routing
[ 0.131364] PCI: pci_cache_line_size set to 64 bytes
[ 0.131477] e820: reserve RAM buffer [mem 0xaced0000-0xafffffff]
[ 0.131479] e820: reserve RAM buffer [mem 0x44e600000-0x44fffffff]
[ 0.131558] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.131561] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.133583] Switched to clocksource hpet
[ 0.134712] pnp: PnP ACPI init
[ 0.134720] ACPI: bus type PNP registered
[ 0.134766] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.134768] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.134770] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.134771] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.134773] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.134774] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.134776] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.134777] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.134779] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[ 0.134780] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[ 0.134783] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135051] pnp 00:01: [dma 4]
[ 0.135067] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.135086] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.135154] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.135156] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.135180] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.135204] system 00:05: [io 0x0500-0x057f] could not be reserved
[ 0.135206] system 00:05: [io 0x0480-0x04bf] has been reserved
[ 0.135208] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.135223] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.135249] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.135273] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.135281] pnp: PnP ACPI: found 9 devices
[ 0.135282] ACPI: bus type PNP unregistered
[ 0.141138] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.141140] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.141142] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.141147] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.141148] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.141150] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.141154] pci 0000:00:1c.2: BAR 14: assigned [mem 0xafa00000-0xafbfffff]
[ 0.141157] pci 0000:00:1c.2: BAR 15: assigned [mem 0xafc00000-0xafdfffff 64bit pref]
[ 0.141159] pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.141161] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.141168] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.141179] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.141186] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
[ 0.141198] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.141201] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.141207] pci 0000:00:1c.2: bridge window [mem 0xafa00000-0xafbfffff]
[ 0.141212] pci 0000:00:1c.2: bridge window [mem 0xafc00000-0xafdfffff 64bit pref]
[ 0.141220] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.141222] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.141223] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.141224] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.141226] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.141227] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.141228] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.141229] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.141231] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.141232] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.141233] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.141235] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 0.141236] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 0.141237] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 0.141238] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 0.141240] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 0.141241] pci_bus 0000:00: resource 20 [mem 0xafa00000-0xfebfffff]
[ 0.141242] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[ 0.141244] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[ 0.141245] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
[ 0.141247] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.141248] pci_bus 0000:03: resource 1 [mem 0xafa00000-0xafbfffff]
[ 0.141249] pci_bus 0000:03: resource 2 [mem 0xafc00000-0xafdfffff 64bit pref]
[ 0.141299] NET: Registered protocol family 2
[ 0.141527] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.141815] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.141920] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.141936] TCP: reno registered
[ 0.141951] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.141996] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.142092] NET: Registered protocol family 1
[ 0.142103] pci 0000:00:02.0: Boot video device
[ 0.142169] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.142170] pci 0000:00:14.0: PCI INT A: no GSI
[ 0.142245] pci 0000:00:14.0: can't derive routing for PCI INT A
[ 0.142494] PCI: CLS 64 bytes, default 64
[ 0.142527] Unpacking initramfs...
[ 0.368738] Freeing initrd memory: 15660K (ffff88003615a000 - ffff8800370a5000)
[ 0.368744] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.368746] software IO TLB [mem 0xa8ed0000-0xaced0000] (64MB) mapped at [ffff8800a8ed0000-ffff8800acecffff]
[ 0.369086] audit: initializing netlink socket (disabled)
[ 0.369096] type=2000 audit(1390405714.364:1): initialized
[ 0.380003] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.380711] VFS: Disk quotas dquot_6.5.2
[ 0.380729] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.380789] msgmni has been set to 32005
[ 0.381007] alg: No test for stdrng (krng)
[ 0.381028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.381057] io scheduler noop registered
[ 0.381059] io scheduler deadline registered
[ 0.381074] io scheduler cfq registered (default)
[ 0.381214] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.381365] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.381443] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
[ 0.381518] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.381631] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.381632] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.381633] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 0.381639] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.381659] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.381660] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.381665] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.381685] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.381689] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.381697] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.381730] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 1e14 ss_vid 8086 ss_did 1e14
[ 0.381756] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 0.381760] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.381778] intel_idle: MWAIT substates: 0x21120
[ 0.381779] intel_idle: v0.4 model 0x3A
[ 0.381780] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.381870] GHES: HEST is not enabled!
[ 0.381926] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.382244] Linux agpgart interface v0.103
[ 0.382304] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.384601] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.384605] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.384690] mousedev: PS/2 mouse device common for all mice
[ 0.384719] rtc_cmos 00:06: RTC can wake from S4
[ 0.384840] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.384867] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.384872] Intel P-state driver initializing.
[ 0.384880] Intel pstate controlling: cpu 0
[ 0.384896] Intel pstate controlling: cpu 1
[ 0.384903] Intel pstate controlling: cpu 2
[ 0.384913] Intel pstate controlling: cpu 3
[ 0.384931] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 0.384932] AMD IOMMUv2 functionality not available on this system
[ 0.384993] TCP: cubic registered
[ 0.385060] NET: Registered protocol family 10
[ 0.385200] mip6: Mobile IPv6
[ 0.385202] NET: Registered protocol family 17
[ 0.385204] mpls_gso: MPLS GSO support
[ 0.385378] registered taskstats version 1
[ 0.386218] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.386499] rtc_cmos 00:06: setting system clock to 2014-01-22 15:48:34 UTC (1390405714)
[ 0.386524] PM: Hibernation image not present or could not be loaded.
[ 0.386974] Freeing unused kernel memory: 972K (ffffffff818a8000 - ffffffff8199b000)
[ 0.386975] Write protecting the kernel read-only data: 8192k
[ 0.389439] Freeing unused kernel memory: 1432K (ffff88000149a000 - ffff880001600000)
[ 0.390244] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
[ 0.476118] systemd-udevd[70]: starting version 204
[ 0.494118] ACPI: bus type USB registered
[ 0.494151] usbcore: registered new interface driver usbfs
[ 0.494168] usbcore: registered new interface driver hub
[ 0.495579] usbcore: registered new device driver usb
[ 0.495986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.496165] ehci-pci: EHCI PCI platform driver
[ 0.497029] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 0.497043] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.497052] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.497070] ehci-pci 0000:00:1a.0: debug port 2
[ 0.497748] pps_core: LinuxPPS API ver. 1 registered
[ 0.497750] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.497950] PTP clock support registered
[ 0.498608] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.498610] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.500984] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.501009] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0635800
[ 0.501074] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.501076] ACPI: Thermal Zone [THM0] (61 C)
[ 0.503698] SCSI subsystem initialized
[ 0.505384] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.505389] ACPI: Thermal Zone [THM1] (27 C)
[ 0.506250] sdhci: Secure Digital Host Controller Interface driver
[ 0.506252] sdhci: Copyright(c) Pierre Ossman
[ 0.506508] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 0.506987] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
[ 0.508262] libata version 3.00 loaded.
[ 0.510074] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.510157] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.510161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.510164] usb usb1: Product: EHCI Host Controller
[ 0.510166] usb usb1: Manufacturer: Linux 3.12-rc7-amd64 ehci_hcd
[ 0.510169] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.510374] hub 1-0:1.0: USB hub found
[ 0.510385] hub 1-0:1.0: 3 ports detected
[ 0.510674] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 0.510682] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.510689] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.510705] ehci-pci 0000:00:1d.0: debug port 2
[ 0.514612] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.514706] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0635c00
[ 0.521930] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.526113] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.526180] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.526183] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.526186] usb usb2: Product: EHCI Host Controller
[ 0.526188] usb usb2: Manufacturer: Linux 3.12-rc7-amd64 ehci_hcd
[ 0.526190] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.526422] hub 2-0:1.0: USB hub found
[ 0.526502] hub 2-0:1.0: 3 ports detected
[ 0.526996] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[ 0.526999] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[ 0.527027] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 0.527031] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.527038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.527149] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.527174] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 0.527264] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.527268] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.527270] usb usb3: Product: xHCI Host Controller
[ 0.527272] usb usb3: Manufacturer: Linux 3.12-rc7-amd64 xhci_hcd
[ 0.527275] usb usb3: SerialNumber: 0000:00:14.0
[ 0.527450] hub 3-0:1.0: USB hub found
[ 0.527468] hub 3-0:1.0: 4 ports detected
[ 0.527608] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.527613] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.527716] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.527718] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.527719] usb usb4: Product: xHCI Host Controller
[ 0.527721] usb usb4: Manufacturer: Linux 3.12-rc7-amd64 xhci_hcd
[ 0.527722] usb usb4: SerialNumber: 0000:00:14.0
[ 0.527868] hub 4-0:1.0: USB hub found
[ 0.527885] hub 4-0:1.0: 4 ports detected
[ 0.530999] e1000e 0000:00:19.0: setting latency timer to 64
[ 0.531065] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.531092] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 0.730299] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.730303] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:6a:16:ab
[ 0.730305] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.730366] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 0.730425] ahci 0000:00:1f.2: version 3.0
[ 0.730524] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.730550] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.730572] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 0.730573] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 0.730577] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.730995] scsi0 : ahci
[ 0.731077] scsi1 : ahci
[ 0.731148] scsi2 : ahci
[ 0.731217] scsi3 : ahci
[ 0.731286] scsi4 : ahci
[ 0.731351] scsi5 : ahci
[ 0.731374] ata1: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635100 irq 45
[ 0.731376] ata2: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635180 irq 45
[ 0.731377] ata3: DUMMY
[ 0.731378] ata4: DUMMY
[ 0.731379] ata5: DUMMY
[ 0.731379] ata6: DUMMY
[ 0.822580] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.955384] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 0.955389] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 0.955715] hub 1-1:1.0: USB hub found
[ 0.955881] hub 1-1:1.0: 6 ports detected
[ 1.050829] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.051230] ata1.00: supports DRM functions and may not be fully accessible
[ 1.051466] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133
[ 1.051469] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.052422] ata1.00: supports DRM functions and may not be fully accessible
[ 1.053251] ata1.00: configured for UDMA/133
[ 1.053546] scsi 0:0:0:0: Direct-Access ATA Crucial_CT960M50 MU02 PQ: 0 ANSI: 5
[ 1.066899] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.199589] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.199595] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.200020] hub 2-1:1.0: USB hub found
[ 1.200196] hub 2-1:1.0: 8 ports detected
[ 1.271348] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 1.364711] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
[ 1.364717] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.364720] usb 1-1.3: Product: Biometric Coprocessor
[ 1.364722] usb 1-1.3: Manufacturer: Auth
[ 1.367155] tsc: Refined TSC clocksource calibration: 2793.654 MHz
[ 1.371207] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.386248] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
[ 1.386253] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.386406] sd 0:0:0:0: [sda] Write Protect is off
[ 1.386409] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.386444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.388281] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
[ 1.389261] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.390914] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.435337] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
[ 1.455969] device-mapper: uevent: version 1.0.3
[ 1.456037] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[ 1.527326] raid6: sse2x1 7166 MB/s
[ 1.531072] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
[ 1.531075] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.531077] usb 1-1.4: Product: BCM20702A0
[ 1.531078] usb 1-1.4: Manufacturer: Broadcom Corp
[ 1.531080] usb 1-1.4: SerialNumber: 2016D8D6A3C7
[ 1.595402] raid6: sse2x2 10683 MB/s
[ 1.603539] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
[ 1.663493] raid6: sse2x4 13895 MB/s
[ 1.663495] raid6: using algorithm sse2x4 (13895 MB/s)
[ 1.663496] raid6: using ssse3x2 recovery algorithm
[ 1.663719] xor: automatically using best checksumming function:
[ 1.703159] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2
[ 1.703161] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.703162] usb 1-1.6: Product: Integrated Camera
[ 1.703164] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
[ 1.703533] avx : 26887.000 MB/sec
[ 1.705494] bio: create slab <bio-1> at 1
[ 1.705642] Btrfs loaded
[ 1.713362] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 1.714589] XFS (sda4): Mounting Filesystem
[ 1.737835] XFS (sda4): Ending clean mount
[ 1.775874] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
[ 1.879134] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205
[ 1.879138] usb 2-1.4: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 1.879140] usb 2-1.4: Product: Qualcomm Gobi 2000
[ 1.879141] usb 2-1.4: Manufacturer: Qualcomm Incorporated
[ 1.883506] systemd-udevd[417]: starting version 204
[ 1.952748] ACPI: Requesting acpi_cpufreq
[ 1.955752] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0E:00/input/input1
[ 1.955758] ACPI: Sleep Button [SLPB]
[ 1.955831] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0D:00/input/input2
[ 1.955994] ACPI: Lid Switch [LID]
[ 1.956040] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.956043] ACPI: Power Button [PWRF]
[ 1.960717] mei_me 0000:00:16.0: setting latency timer to 64
[ 1.960754] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[ 1.965073] [drm] Initialized drm 1.1.0 20060810
[ 1.977201] Non-volatile memory driver v1.3
[ 1.980096] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 1.985159] cfg80211: Calling CRDA to update world regulatory domain
[ 1.986686] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 1.988252] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 1.988255] Copyright(c) 2003-2013 Intel Corporation
[ 1.989251] udevd[577]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ 1.996616] udevd[597]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ 1.997361] ACPI: AC Adapter [AC] (on-line)
[ 1.997856] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
[ 1.998511] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 1.999280] udevd[605]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ 2.001466] iwlwifi 0000:02:00.0: firmware: agent loaded iwlwifi-6000g2a-6.ucode into memory
[ 2.001611] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 2.006926] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[ 2.007372] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 2.007430] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 2.007478] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 2.007531] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.007580] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.007623] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.007673] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.008359] ACPI Warning: 0x0000000000000528-0x000000000000052f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
[ 2.008363] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.008366] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 2.008368] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.008368] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 2.008370] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.008371] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 2.011209] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 2.011212] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 2.011214] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 2.011216] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 2.011302] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 2.020483] udevd[647]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ 2.026775] udevd[660]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ 2.028220] udevd[661]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ 2.029996] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 2.030239] acpi device:07: registered as cooling_device4
[ 2.030302] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.030306] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 2.030307] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 2.030309] thinkpad_acpi: ThinkPad BIOS CBET4000 coreboot, EC unknown
[ 2.030310] thinkpad_acpi: Lenovo ThinkPad X230, model 2325TLU
[ 2.030341] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 2.031440] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 2.031467] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 2.031469] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 2.036228] media: Linux media interface: v0.10
[ 2.037131] usbcore: registered new interface driver usbserial
[ 2.037143] usbcore: registered new interface driver usbserial_generic
[ 2.037151] usbserial: USB Serial support registered for generic
[ 2.038015] Linux video capture interface: v2.00
[ 2.039013] ACPI: Battery Slot [BAT0] (battery present)
[ 2.039094] usbcore: registered new interface driver qcserial
[ 2.039105] usbserial: USB Serial support registered for Qualcomm USB modem
[ 2.039125] ACPI: Battery Slot [BAT1] (battery absent)
[ 2.039228] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 2.040287] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
[ 2.040964] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 2.041885] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
[ 2.042016] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
[ 2.042113] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14
[ 2.042188] [drm] Memory usable by graphics device = 2048M
[ 2.042194] i915 0000:00:02.0: setting latency timer to 64
[ 2.042507] usbcore: registered new interface driver cdc_wdm
[ 2.043123] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected
[ 2.050172] udevd[695]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ 2.060420] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1
[ 2.060459] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input15
[ 2.060509] usbcore: registered new interface driver uvcvideo
[ 2.060511] USB Video Class driver (1.1.1)
[ 2.060881] udevd[716]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ 2.061226] i915 0000:00:02.0: irq 49 for MSI/MSI-X
[ 2.061234] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.061235] [drm] Driver supports precise vblank timestamp query.
[ 2.061237] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected
[ 2.061301] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.061312] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2
[ 2.063893] udevd[719]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ 2.064422] qmi_wwan 2-1.4:1.0: cdc-wdm0: USB WDM device
[ 2.064547] qmi_wwan 2-1.4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.4, WWAN/QMI device, ae:1c:c7:97:fc:3b
[ 2.064572] usbcore: registered new interface driver qmi_wwan
[ 2.064815] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.066228] udevd[733]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ 2.067337] Bluetooth: Core ver 2.16
[ 2.067349] NET: Registered protocol family 31
[ 2.067350] Bluetooth: HCI device and connection manager initialized
[ 2.067357] Bluetooth: HCI socket layer initialized
[ 2.067359] Bluetooth: L2CAP socket layer initialized
[ 2.067363] Bluetooth: SCO socket layer initialized
[ 2.088480] usbcore: registered new interface driver btusb
[ 2.089909] udevd[787]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
[ 2.099244] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 2.099383] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[ 2.112265] iTCO_vendor_support: vendor-support=0
[ 2.113351] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 2.113379] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 2.114582] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.120952] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 2.121185] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
[ 2.121635] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 2.121738] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
[ 2.121986] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
[ 2.122150] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.130479] cfg80211: World regulatory domain updated:
[ 2.130482] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.130483] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.130484] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.130485] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.130486] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.130486] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.188202] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[ 2.205632] fbcon: inteldrmfb (fb0) is primary device
[ 2.368615] Switched to clocksource tsc
[ 2.870211] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
[ 2.870228] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 2.909589] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input16
[ 3.000413] Console: switching to colour frame buffer device 170x48
[ 3.003624] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.003626] i915 0000:00:02.0: registered panic notifier
[ 3.003644] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.798444] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 5.780403] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 7.085614] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 7.285928] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17
[ 9.463111] bio: create slab <bio-2> at 2
[ 9.530882] bio: create slab <bio-2> at 2
[ 9.586054] loop: module loaded
[ 9.593053] fuse init (API version 7.22)
[ 9.693306] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 9.696195] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 9.696716] XFS (dm-0): Mounting Filesystem
[ 9.720269] XFS (dm-0): Ending clean mount
[ 9.734118] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 9.734789] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 10.426632] Bluetooth: RFCOMM TTY layer initialized
[ 10.426644] Bluetooth: RFCOMM socket layer initialized
[ 10.426646] Bluetooth: RFCOMM ver 1.11
[ 10.430669] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.430671] Bluetooth: BNEP filters: protocol multicast
[ 10.430677] Bluetooth: BNEP socket layer initialized
[ 10.991544] systemd-logind[3179]: New seat seat0.
[ 10.992039] systemd-logind[3179]: Watching system buttons on /dev/input/event3 (Power Button)
[ 10.992085] systemd-logind[3179]: Watching system buttons on /dev/input/event13 (Video Bus)
[ 10.992123] systemd-logind[3179]: Watching system buttons on /dev/input/event2 (Lid Switch)
[ 10.992161] systemd-logind[3179]: Watching system buttons on /dev/input/event1 (Sleep Button)
[ 10.992197] systemd-logind[3179]: Watching system buttons on /dev/input/event14 (ThinkPad Extra Buttons)
[ 10.992659] systemd-logind[3179]: New session 1 of user Debian-gdm.
[ 10.992713] systemd-logind[3179]: Linked /tmp/.X11-unix/X0 to /run/user/114/X11-display.
[ 11.092174] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 11.195352] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 11.195624] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.198424] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 11.205294] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 11.269550] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18
[ 11.471097] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 11.477983] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 11.552129] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.447419] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_ABORT_CMD: time out after 2000ms.
[ 14.447425] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 30 write_ptr 31
[ 14.735114] iwlwifi 0000:02:00.0: HCMD_ACTIVE already clear for command REPLY_RXON
[ 14.869499] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
[ 14.876365] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 14.956205] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.076996] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 15.180390] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 15.180637] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.311588] systemd-logind[3179]: New session c1 of user phcoder.
[ 21.505584] wlan0: authenticate with 00:24:37:96:06:b0
[ 21.514325] wlan0: send auth to 00:24:37:96:06:b0 (try 1/3)
[ 21.580932] wlan0: authenticated
[ 21.581205] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 21.581210] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 21.584259] wlan0: associate with 00:24:37:96:06:b0 (try 1/3)
[ 21.587091] wlan0: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=1)
[ 21.590203] wlan0: associated
[ 21.590230] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready