blob: 4c437c8a848713e31731f786f8ffe1bf395dd43c [file] [log] [blame]
Vladimir Serbinenkoa4cb05e2014-01-22 16:53:48 +01001[ 0.000000] Initializing cgroup subsys cpuset
2[ 0.000000] Initializing cgroup subsys cpu
3[ 0.000000] Initializing cgroup subsys cpuacct
4[ 0.000000] Linux version 3.12-rc7-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-9) ) #1 SMP Debian 3.12~rc7-1~exp1 (2013-10-28)
5[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.12-rc7-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
6[ 0.000000] e820: BIOS-provided physical RAM map:
7[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000000fff] type 16
8[ 0.000000] BIOS-e820: [mem 0x0000000000001000-0x000000000009ffff] usable
9[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
10[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
11[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
12[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
13[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
14[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acecffff] usable
15[ 0.000000] BIOS-e820: [mem 0x00000000aced0000-0x00000000acffffff] type 16
16[ 0.000000] BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved
17[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
18[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044e5fffff] usable
19[ 0.000000] NX (Execute Disable) protection: active
20[ 0.000000] SMBIOS 2.7 present.
21[ 0.000000] DMI: LENOVO 2325TLU, BIOS CBET4000 coreboot 01/22/2014
22[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
23[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
24[ 0.000000] No AGP bridge found
25[ 0.000000] e820: last_pfn = 0x44e600 max_arch_pfn = 0x400000000
26[ 0.000000] MTRR default type: write-back
27[ 0.000000] MTRR fixed ranges enabled:
28[ 0.000000] 00000-9FFFF write-back
29[ 0.000000] A0000-BFFFF uncachable
30[ 0.000000] C0000-FFFFF write-back
31[ 0.000000] MTRR variable ranges enabled:
32[ 0.000000] 0 base 0AD000000 mask FFF000000 uncachable
33[ 0.000000] 1 base 0AE000000 mask FFE000000 uncachable
34[ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
35[ 0.000000] 3 base 0C0000000 mask FE0000000 uncachable
36[ 0.000000] 4 base 0E0000000 mask FF0000000 uncachable
37[ 0.000000] 5 base 0F0000000 mask FF8000000 uncachable
38[ 0.000000] 6 base 0F8000000 mask FFC000000 uncachable
39[ 0.000000] 7 base 0FC000000 mask FFE000000 uncachable
40[ 0.000000] 8 base 0FE000000 mask FFF000000 uncachable
41[ 0.000000] 9 base 0FF000000 mask FFF800000 uncachable
42[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
43[ 0.000000] e820: last_pfn = 0xaced0 max_arch_pfn = 0x400000000
44[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
45[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
46[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
47[ 0.000000] BRK [0x01a8b000, 0x01a8bfff] PGTABLE
48[ 0.000000] BRK [0x01a8c000, 0x01a8cfff] PGTABLE
49[ 0.000000] BRK [0x01a8d000, 0x01a8dfff] PGTABLE
50[ 0.000000] init_memory_mapping: [mem 0x44e400000-0x44e5fffff]
51[ 0.000000] [mem 0x44e400000-0x44e5fffff] page 2M
52[ 0.000000] BRK [0x01a8e000, 0x01a8efff] PGTABLE
53[ 0.000000] init_memory_mapping: [mem 0x44c000000-0x44e3fffff]
54[ 0.000000] [mem 0x44c000000-0x44e3fffff] page 2M
55[ 0.000000] init_memory_mapping: [mem 0x400000000-0x44bffffff]
56[ 0.000000] [mem 0x400000000-0x44bffffff] page 2M
57[ 0.000000] BRK [0x01a8f000, 0x01a8ffff] PGTABLE
58[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
59[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
60[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
61[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
62[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
63[ 0.000000] init_memory_mapping: [mem 0x40200000-0xacecffff]
64[ 0.000000] [mem 0x40200000-0xacdfffff] page 2M
65[ 0.000000] [mem 0xace00000-0xacecffff] page 4k
66[ 0.000000] BRK [0x01a90000, 0x01a90fff] PGTABLE
67[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
68[ 0.000000] [mem 0x100000000-0x3ffffffff] page 2M
69[ 0.000000] RAMDISK: [mem 0x3615a000-0x370a4fff]
70[ 0.000000] ACPI: RSDP 00000000000f0000 00024 (v02 CORE )
71[ 0.000000] ACPI: XSDT 00000000acee08e0 0004C (v01 CORE COREBOOT 00000000 CORE 00000000)
72[ 0.000000] ACPI: FACP 00000000acee3f70 000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
73[ 0.000000] ACPI: DSDT 00000000acee0a50 0351A (v02 COREv4 COREBOOT 20110725 INTL 20131218)
74[ 0.000000] ACPI: FACS 00000000acee0a10 00040
75[ 0.000000] ACPI: HPET 00000000acee4070 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
76[ 0.000000] ACPI: APIC 00000000acee40b0 0006C (v01 CORE COREBOOT 00000000 CORE 00000000)
77[ 0.000000] ACPI: MCFG 00000000acee4120 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
78[ 0.000000] ACPI: SSDT 00000000acee5020 0122C (v02 CORE COREBOOT 0000002A CORE 0000002A)
79[ 0.000000] ACPI: Local APIC address 0xfee00000
80[ 0.000000] No NUMA configuration found
81[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000044e5fffff]
82[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x44e5fffff]
83[ 0.000000] NODE_DATA [mem 0x44e5ee000-0x44e5f1fff]
84[ 0.000000] [ffffea0000000000-ffffea000f1fffff] PMD -> [ffff88043dc00000-ffff88044bdfffff] on node 0
85[ 0.000000] Zone ranges:
86[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
87[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
88[ 0.000000] Normal [mem 0x100000000-0x44e5fffff]
89[ 0.000000] Movable zone start for each node
90[ 0.000000] Early memory node ranges
91[ 0.000000] node 0: [mem 0x00001000-0x0009ffff]
92[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
93[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
94[ 0.000000] node 0: [mem 0x40200000-0xacecffff]
95[ 0.000000] node 0: [mem 0x100000000-0x44e5fffff]
96[ 0.000000] On node 0 totalpages: 4173935
97[ 0.000000] DMA zone: 56 pages used for memmap
98[ 0.000000] DMA zone: 22 pages reserved
99[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
100[ 0.000000] DMA32 zone: 9614 pages used for memmap
101[ 0.000000] DMA32 zone: 703184 pages, LIFO batch:31
102[ 0.000000] Normal zone: 47397 pages used for memmap
103[ 0.000000] Normal zone: 3466752 pages, LIFO batch:31
104[ 0.000000] ACPI: PM-Timer IO Port: 0x508
105[ 0.000000] ACPI: Local APIC address 0xfee00000
106[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
107[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
108[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
109[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
110[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
111[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
112[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
113[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
114[ 0.000000] ACPI: IRQ0 used by override.
115[ 0.000000] ACPI: IRQ2 used by override.
116[ 0.000000] ACPI: IRQ9 used by override.
117[ 0.000000] Using ACPI (MADT) for SMP configuration information
118[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
119[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
120[ 0.000000] nr_irqs_gsi: 40
121[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
122[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
123[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
124[ 0.000000] PM: Registered nosave memory: [mem 0xaced0000-0xacffffff]
125[ 0.000000] PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff]
126[ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
127[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
128[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
129[ 0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
130[ 0.000000] Booting paravirtualized kernel on bare hardware
131[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
132[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88044e200000 s85888 r8192 d20608 u524288
133[ 0.000000] pcpu-alloc: s85888 r8192 d20608 u524288 alloc=1*2097152
134[ 0.000000] pcpu-alloc: [0] 0 1 2 3
135[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4116846
136[ 0.000000] Policy zone: Normal
137[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.12-rc7-amd64 root=UUID=7278a628-211f-452e-a4ce-959ca7e8b94a ro quiet
138[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
139[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
140[ 0.000000] Checking aperture...
141[ 0.000000] No AGP bridge found
142[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
143[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
144[ 0.000000] Memory: 16370920K/16695740K available (4703K kernel code, 666K rwdata, 1592K rodata, 972K init, 932K bss, 324820K reserved)
145[ 0.000000] Hierarchical RCU implementation.
146[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
147[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
148[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
149[ 0.000000] Console: colour VGA+ 80x25
150[ 0.000000] console [tty0] enabled
151[ 0.000000] hpet clockevent registered
152[ 0.000000] tsc: Fast TSC calibration using PIT
153[ 0.004000] tsc: Detected 2793.525 MHz processor
154[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.05 BogoMIPS (lpj=11174100)
155[ 0.000004] pid_max: default: 32768 minimum: 301
156[ 0.000023] Security Framework initialized
157[ 0.000027] AppArmor: AppArmor disabled by boot time parameter
158[ 0.000027] Yama: disabled by default; enable with sysctl kernel.yama.*
159[ 0.000752] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
160[ 0.004249] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
161[ 0.005834] Mount-cache hash table entries: 256
162[ 0.005969] Initializing cgroup subsys memory
163[ 0.005979] Initializing cgroup subsys devices
164[ 0.005980] Initializing cgroup subsys freezer
165[ 0.005981] Initializing cgroup subsys net_cls
166[ 0.005983] Initializing cgroup subsys blkio
167[ 0.005984] Initializing cgroup subsys perf_event
168[ 0.006004] CPU: Physical Processor ID: 0
169[ 0.006004] CPU: Processor Core ID: 0
170[ 0.006325] mce: CPU supports 7 MCE banks
171[ 0.006334] CPU0: Thermal monitoring enabled (TM1)
172[ 0.006343] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
173[ 0.006343] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
174[ 0.006343] tlb_flushall_shift: 1
175[ 0.006440] Freeing SMP alternatives memory: 20K (ffffffff8199b000 - ffffffff819a0000)
176[ 0.007318] ACPI: Core revision 20130725
177[ 0.008965] ACPI: All ACPI Tables successfully acquired
178[ 0.009620] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
179[ 0.049351] smpboot: CPU0: Intel(R) Core(TM) i5-3360M CPU @ 2.80GHz (fam: 06, model: 3a, stepping: 09)
180[ 0.049358] TSC deadline timer enabled
181[ 0.049365] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
182[ 0.049370] ... version: 3
183[ 0.049371] ... bit width: 48
184[ 0.049371] ... generic registers: 4
185[ 0.049372] ... value mask: 0000ffffffffffff
186[ 0.049373] ... max period: 0000ffffffffffff
187[ 0.049374] ... fixed-purpose events: 3
188[ 0.049374] ... event mask: 000000070000000f
189[ 0.062966] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
190[ 0.049557] smpboot: Booting Node 0, Processors # 1 # 2 # 3 OK
191[ 0.090047] Brought up 4 CPUs
192[ 0.090050] smpboot: Total of 4 processors activated (22348.20 BogoMIPS)
193[ 0.092837] devtmpfs: initialized
194[ 0.095722] NET: Registered protocol family 16
195[ 0.095791] cpuidle: using governor ladder
196[ 0.095792] cpuidle: using governor menu
197[ 0.095801] ACPI: bus type PCI registered
198[ 0.095802] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
199[ 0.095848] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
200[ 0.095850] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
201[ 0.099601] PCI: Using configuration type 1 for base access
202[ 0.100149] bio: create slab <bio-0> at 0
203[ 0.100235] ACPI: Added _OSI(Module Device)
204[ 0.100236] ACPI: Added _OSI(Processor Device)
205[ 0.100237] ACPI: Added _OSI(3.0 _SCP Extensions)
206[ 0.100238] ACPI: Added _OSI(Processor Aggregator Device)
207[ 0.100772] ACPI: EC: Look up EC in DSDT
208[ 0.102450] ACPI: Interpreter enabled
209[ 0.102454] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
210[ 0.102458] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
211[ 0.102467] ACPI: (supports S0 S3 S4 S5)
212[ 0.102468] ACPI: Using IOAPIC for interrupt routing
213[ 0.102488] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
214[ 0.102558] ACPI: No dock devices found.
215[ 0.106258] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
216[ 0.106288] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
217[ 0.106312] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
218[ 0.106389] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
219[ 0.106440] ACPI: \_SB_.PCI0.PDRC: can't evaluate _ADR (0x5)
220[ 0.106511] PCI host bridge to bus 0000:00
221[ 0.106513] pci_bus 0000:00: root bus resource [bus 00-ff]
222[ 0.106515] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
223[ 0.106516] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
224[ 0.106518] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
225[ 0.106519] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
226[ 0.106520] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
227[ 0.106521] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
228[ 0.106523] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
229[ 0.106524] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
230[ 0.106525] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
231[ 0.106526] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
232[ 0.106528] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
233[ 0.106529] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
234[ 0.106530] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
235[ 0.106532] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
236[ 0.106533] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
237[ 0.106534] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
238[ 0.106535] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
239[ 0.106537] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
240[ 0.106543] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
241[ 0.106611] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
242[ 0.106620] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
243[ 0.106625] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
244[ 0.106629] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
245[ 0.106704] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
246[ 0.106725] pci 0000:00:14.0: reg 0x10: [mem 0xe0620000-0xe062ffff 64bit]
247[ 0.106793] pci 0000:00:14.0: PME# supported from D3hot D3cold
248[ 0.106824] pci 0000:00:14.0: System wakeup disabled by ACPI
249[ 0.106853] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
250[ 0.106874] pci 0000:00:16.0: reg 0x10: [mem 0xe0636100-0xe063610f 64bit]
251[ 0.106948] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
252[ 0.107009] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
253[ 0.107026] pci 0000:00:19.0: reg 0x10: [mem 0xe0600000-0xe061ffff]
254[ 0.107035] pci 0000:00:19.0: reg 0x14: [mem 0xe0634000-0xe0634fff]
255[ 0.107043] pci 0000:00:19.0: reg 0x18: [io 0x1840-0x185f]
256[ 0.107103] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
257[ 0.107157] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
258[ 0.107177] pci 0000:00:1a.0: reg 0x10: [mem 0xe0635800-0xe0635bff]
259[ 0.107263] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
260[ 0.107293] pci 0000:00:1a.0: System wakeup disabled by ACPI
261[ 0.107322] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
262[ 0.107336] pci 0000:00:1b.0: reg 0x10: [mem 0xe0630000-0xe0633fff 64bit]
263[ 0.107401] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
264[ 0.107432] pci 0000:00:1b.0: System wakeup disabled by ACPI
265[ 0.107464] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
266[ 0.107591] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
267[ 0.107660] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
268[ 0.107787] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
269[ 0.107856] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
270[ 0.107975] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
271[ 0.108049] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
272[ 0.108069] pci 0000:00:1d.0: reg 0x10: [mem 0xe0635c00-0xe0635fff]
273[ 0.108155] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
274[ 0.108187] pci 0000:00:1d.0: System wakeup disabled by ACPI
275[ 0.108215] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
276[ 0.108366] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
277[ 0.108385] pci 0000:00:1f.2: reg 0x10: [io 0x1880-0x1887]
278[ 0.108393] pci 0000:00:1f.2: reg 0x14: [io 0x1890-0x1893]
279[ 0.108401] pci 0000:00:1f.2: reg 0x18: [io 0x1888-0x188f]
280[ 0.108409] pci 0000:00:1f.2: reg 0x1c: [io 0x1894-0x1897]
281[ 0.108418] pci 0000:00:1f.2: reg 0x20: [io 0x1860-0x187f]
282[ 0.108426] pci 0000:00:1f.2: reg 0x24: [mem 0xe0635000-0xe06357ff]
283[ 0.108473] pci 0000:00:1f.2: PME# supported from D3hot
284[ 0.108522] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
285[ 0.108537] pci 0000:00:1f.3: reg 0x10: [mem 0xe0636000-0xe06360ff 64bit]
286[ 0.108557] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
287[ 0.108740] pci 0000:01:00.0: [1180:e823] type 00 class 0x080501
288[ 0.108766] pci 0000:01:00.0: MMC controller base frequency changed to 50Mhz.
289[ 0.108786] pci 0000:01:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
290[ 0.108787] pci 0000:01:00.0: MMC cards are now supported by standard SDHCI controller
291[ 0.108821] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe04000ff]
292[ 0.109096] pci 0000:01:00.0: supports D1 D2
293[ 0.109097] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
294[ 0.109203] pci 0000:01:00.1: [1180:e232] type 00 class 0x088000
295[ 0.109239] pci 0000:01:00.1: reg 0x10: [mem 0xe0400100-0xe04001ff]
296[ 0.109511] pci 0000:01:00.1: supports D1 D2
297[ 0.109512] pci 0000:01:00.1: PME# supported from D0 D1 D2 D3hot D3cold
298[ 0.116736] pci 0000:00:1c.0: PCI bridge to [bus 01]
299[ 0.116748] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
300[ 0.116997] pci 0000:02:00.0: [8086:0085] type 00 class 0x028000
301[ 0.117147] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe0501fff 64bit]
302[ 0.117856] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
303[ 0.128844] pci 0000:00:1c.1: PCI bridge to [bus 02]
304[ 0.128853] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
305[ 0.128946] pci 0000:00:1c.2: PCI bridge to [bus 03]
306[ 0.129127] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
307[ 0.129168] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
308[ 0.129206] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
309[ 0.129243] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
310[ 0.129280] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
311[ 0.129317] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
312[ 0.129354] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
313[ 0.129391] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
314[ 0.129745] ACPI: \_SB_.PCI0: notify handler is installed
315[ 0.129768] Found 1 acpi root devices
316[ 0.129801] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
317[ 0.129861] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
318[ 0.129864] vgaarb: loaded
319[ 0.129865] vgaarb: bridge control possible 0000:00:02.0
320[ 0.129893] PCI: Using ACPI for IRQ routing
321[ 0.131364] PCI: pci_cache_line_size set to 64 bytes
322[ 0.131477] e820: reserve RAM buffer [mem 0xaced0000-0xafffffff]
323[ 0.131479] e820: reserve RAM buffer [mem 0x44e600000-0x44fffffff]
324[ 0.131558] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
325[ 0.131561] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
326[ 0.133583] Switched to clocksource hpet
327[ 0.134712] pnp: PnP ACPI init
328[ 0.134720] ACPI: bus type PNP registered
329[ 0.134766] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
330[ 0.134768] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
331[ 0.134770] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
332[ 0.134771] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
333[ 0.134773] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
334[ 0.134774] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
335[ 0.134776] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
336[ 0.134777] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
337[ 0.134779] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
338[ 0.134780] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
339[ 0.134783] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
340[ 0.135051] pnp 00:01: [dma 4]
341[ 0.135067] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
342[ 0.135086] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
343[ 0.135154] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
344[ 0.135156] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
345[ 0.135180] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
346[ 0.135204] system 00:05: [io 0x0500-0x057f] could not be reserved
347[ 0.135206] system 00:05: [io 0x0480-0x04bf] has been reserved
348[ 0.135208] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
349[ 0.135223] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
350[ 0.135249] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
351[ 0.135273] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
352[ 0.135281] pnp: PnP ACPI: found 9 devices
353[ 0.135282] ACPI: bus type PNP unregistered
354[ 0.141138] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
355[ 0.141140] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
356[ 0.141142] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
357[ 0.141147] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
358[ 0.141148] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
359[ 0.141150] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
360[ 0.141154] pci 0000:00:1c.2: BAR 14: assigned [mem 0xafa00000-0xafbfffff]
361[ 0.141157] pci 0000:00:1c.2: BAR 15: assigned [mem 0xafc00000-0xafdfffff 64bit pref]
362[ 0.141159] pci 0000:00:1c.2: BAR 13: assigned [io 0x2000-0x2fff]
363[ 0.141161] pci 0000:00:1c.0: PCI bridge to [bus 01]
364[ 0.141168] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
365[ 0.141179] pci 0000:00:1c.1: PCI bridge to [bus 02]
366[ 0.141186] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff]
367[ 0.141198] pci 0000:00:1c.2: PCI bridge to [bus 03]
368[ 0.141201] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
369[ 0.141207] pci 0000:00:1c.2: bridge window [mem 0xafa00000-0xafbfffff]
370[ 0.141212] pci 0000:00:1c.2: bridge window [mem 0xafc00000-0xafdfffff 64bit pref]
371[ 0.141220] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
372[ 0.141222] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
373[ 0.141223] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
374[ 0.141224] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
375[ 0.141226] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
376[ 0.141227] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
377[ 0.141228] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
378[ 0.141229] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
379[ 0.141231] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
380[ 0.141232] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
381[ 0.141233] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
382[ 0.141235] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
383[ 0.141236] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
384[ 0.141237] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
385[ 0.141238] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
386[ 0.141240] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
387[ 0.141241] pci_bus 0000:00: resource 20 [mem 0xafa00000-0xfebfffff]
388[ 0.141242] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
389[ 0.141244] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
390[ 0.141245] pci_bus 0000:02: resource 1 [mem 0xe0500000-0xe05fffff]
391[ 0.141247] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
392[ 0.141248] pci_bus 0000:03: resource 1 [mem 0xafa00000-0xafbfffff]
393[ 0.141249] pci_bus 0000:03: resource 2 [mem 0xafc00000-0xafdfffff 64bit pref]
394[ 0.141299] NET: Registered protocol family 2
395[ 0.141527] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
396[ 0.141815] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
397[ 0.141920] TCP: Hash tables configured (established 131072 bind 65536)
398[ 0.141936] TCP: reno registered
399[ 0.141951] UDP hash table entries: 8192 (order: 6, 262144 bytes)
400[ 0.141996] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
401[ 0.142092] NET: Registered protocol family 1
402[ 0.142103] pci 0000:00:02.0: Boot video device
403[ 0.142169] pci 0000:00:14.0: can't derive routing for PCI INT A
404[ 0.142170] pci 0000:00:14.0: PCI INT A: no GSI
405[ 0.142245] pci 0000:00:14.0: can't derive routing for PCI INT A
406[ 0.142494] PCI: CLS 64 bytes, default 64
407[ 0.142527] Unpacking initramfs...
408[ 0.368738] Freeing initrd memory: 15660K (ffff88003615a000 - ffff8800370a5000)
409[ 0.368744] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
410[ 0.368746] software IO TLB [mem 0xa8ed0000-0xaced0000] (64MB) mapped at [ffff8800a8ed0000-ffff8800acecffff]
411[ 0.369086] audit: initializing netlink socket (disabled)
412[ 0.369096] type=2000 audit(1390405714.364:1): initialized
413[ 0.380003] HugeTLB registered 2 MB page size, pre-allocated 0 pages
414[ 0.380711] VFS: Disk quotas dquot_6.5.2
415[ 0.380729] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
416[ 0.380789] msgmni has been set to 32005
417[ 0.381007] alg: No test for stdrng (krng)
418[ 0.381028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
419[ 0.381057] io scheduler noop registered
420[ 0.381059] io scheduler deadline registered
421[ 0.381074] io scheduler cfq registered (default)
422[ 0.381214] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
423[ 0.381365] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
424[ 0.381443] pcieport 0000:00:1c.2: enabling device (0104 -> 0107)
425[ 0.381518] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
426[ 0.381631] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
427[ 0.381632] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
428[ 0.381633] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
429[ 0.381639] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
430[ 0.381659] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
431[ 0.381660] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
432[ 0.381665] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
433[ 0.381685] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
434[ 0.381689] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
435[ 0.381697] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
436[ 0.381730] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 1e14 ss_vid 8086 ss_did 1e14
437[ 0.381756] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
438[ 0.381760] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
439[ 0.381778] intel_idle: MWAIT substates: 0x21120
440[ 0.381779] intel_idle: v0.4 model 0x3A
441[ 0.381780] intel_idle: lapic_timer_reliable_states 0xffffffff
442[ 0.381870] GHES: HEST is not enabled!
443[ 0.381926] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
444[ 0.382244] Linux agpgart interface v0.103
445[ 0.382304] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
446[ 0.384601] serio: i8042 KBD port at 0x60,0x64 irq 1
447[ 0.384605] serio: i8042 AUX port at 0x60,0x64 irq 12
448[ 0.384690] mousedev: PS/2 mouse device common for all mice
449[ 0.384719] rtc_cmos 00:06: RTC can wake from S4
450[ 0.384840] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
451[ 0.384867] rtc_cmos 00:06: alarms up to one month, 242 bytes nvram, hpet irqs
452[ 0.384872] Intel P-state driver initializing.
453[ 0.384880] Intel pstate controlling: cpu 0
454[ 0.384896] Intel pstate controlling: cpu 1
455[ 0.384903] Intel pstate controlling: cpu 2
456[ 0.384913] Intel pstate controlling: cpu 3
457[ 0.384931] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
458[ 0.384932] AMD IOMMUv2 functionality not available on this system
459[ 0.384993] TCP: cubic registered
460[ 0.385060] NET: Registered protocol family 10
461[ 0.385200] mip6: Mobile IPv6
462[ 0.385202] NET: Registered protocol family 17
463[ 0.385204] mpls_gso: MPLS GSO support
464[ 0.385378] registered taskstats version 1
465[ 0.386218] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
466[ 0.386499] rtc_cmos 00:06: setting system clock to 2014-01-22 15:48:34 UTC (1390405714)
467[ 0.386524] PM: Hibernation image not present or could not be loaded.
468[ 0.386974] Freeing unused kernel memory: 972K (ffffffff818a8000 - ffffffff8199b000)
469[ 0.386975] Write protecting the kernel read-only data: 8192k
470[ 0.389439] Freeing unused kernel memory: 1432K (ffff88000149a000 - ffff880001600000)
471[ 0.390244] Freeing unused kernel memory: 456K (ffff88000178e000 - ffff880001800000)
472[ 0.476118] systemd-udevd[70]: starting version 204
473[ 0.494118] ACPI: bus type USB registered
474[ 0.494151] usbcore: registered new interface driver usbfs
475[ 0.494168] usbcore: registered new interface driver hub
476[ 0.495579] usbcore: registered new device driver usb
477[ 0.495986] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
478[ 0.496165] ehci-pci: EHCI PCI platform driver
479[ 0.497029] ehci-pci 0000:00:1a.0: setting latency timer to 64
480[ 0.497043] ehci-pci 0000:00:1a.0: EHCI Host Controller
481[ 0.497052] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
482[ 0.497070] ehci-pci 0000:00:1a.0: debug port 2
483[ 0.497748] pps_core: LinuxPPS API ver. 1 registered
484[ 0.497750] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
485[ 0.497950] PTP clock support registered
486[ 0.498608] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
487[ 0.498610] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
488[ 0.500984] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
489[ 0.501009] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0635800
490[ 0.501074] thermal LNXTHERM:00: registered as thermal_zone0
491[ 0.501076] ACPI: Thermal Zone [THM0] (61 C)
492[ 0.503698] SCSI subsystem initialized
493[ 0.505384] thermal LNXTHERM:01: registered as thermal_zone1
494[ 0.505389] ACPI: Thermal Zone [THM1] (27 C)
495[ 0.506250] sdhci: Secure Digital Host Controller Interface driver
496[ 0.506252] sdhci: Copyright(c) Pierre Ossman
497[ 0.506508] sdhci-pci 0000:01:00.0: SDHCI controller found [1180:e823] (rev 4)
498[ 0.506987] mmc0: SDHCI controller on PCI [0000:01:00.0] using DMA
499[ 0.508262] libata version 3.00 loaded.
500[ 0.510074] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
501[ 0.510157] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
502[ 0.510161] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
503[ 0.510164] usb usb1: Product: EHCI Host Controller
504[ 0.510166] usb usb1: Manufacturer: Linux 3.12-rc7-amd64 ehci_hcd
505[ 0.510169] usb usb1: SerialNumber: 0000:00:1a.0
506[ 0.510374] hub 1-0:1.0: USB hub found
507[ 0.510385] hub 1-0:1.0: 3 ports detected
508[ 0.510674] ehci-pci 0000:00:1d.0: setting latency timer to 64
509[ 0.510682] ehci-pci 0000:00:1d.0: EHCI Host Controller
510[ 0.510689] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
511[ 0.510705] ehci-pci 0000:00:1d.0: debug port 2
512[ 0.514612] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
513[ 0.514706] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0635c00
514[ 0.521930] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
515[ 0.526113] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
516[ 0.526180] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
517[ 0.526183] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
518[ 0.526186] usb usb2: Product: EHCI Host Controller
519[ 0.526188] usb usb2: Manufacturer: Linux 3.12-rc7-amd64 ehci_hcd
520[ 0.526190] usb usb2: SerialNumber: 0000:00:1d.0
521[ 0.526422] hub 2-0:1.0: USB hub found
522[ 0.526502] hub 2-0:1.0: 3 ports detected
523[ 0.526996] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
524[ 0.526999] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
525[ 0.527027] xhci_hcd 0000:00:14.0: setting latency timer to 64
526[ 0.527031] xhci_hcd 0000:00:14.0: xHCI Host Controller
527[ 0.527038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
528[ 0.527149] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
529[ 0.527174] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
530[ 0.527264] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
531[ 0.527268] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
532[ 0.527270] usb usb3: Product: xHCI Host Controller
533[ 0.527272] usb usb3: Manufacturer: Linux 3.12-rc7-amd64 xhci_hcd
534[ 0.527275] usb usb3: SerialNumber: 0000:00:14.0
535[ 0.527450] hub 3-0:1.0: USB hub found
536[ 0.527468] hub 3-0:1.0: 4 ports detected
537[ 0.527608] xhci_hcd 0000:00:14.0: xHCI Host Controller
538[ 0.527613] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
539[ 0.527716] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
540[ 0.527718] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
541[ 0.527719] usb usb4: Product: xHCI Host Controller
542[ 0.527721] usb usb4: Manufacturer: Linux 3.12-rc7-amd64 xhci_hcd
543[ 0.527722] usb usb4: SerialNumber: 0000:00:14.0
544[ 0.527868] hub 4-0:1.0: USB hub found
545[ 0.527885] hub 4-0:1.0: 4 ports detected
546[ 0.530999] e1000e 0000:00:19.0: setting latency timer to 64
547[ 0.531065] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
548[ 0.531092] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
549[ 0.730299] e1000e 0000:00:19.0 eth0: registered PHC clock
550[ 0.730303] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 3c:97:0e:6a:16:ab
551[ 0.730305] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
552[ 0.730366] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
553[ 0.730425] ahci 0000:00:1f.2: version 3.0
554[ 0.730524] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
555[ 0.730550] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
556[ 0.730572] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
557[ 0.730573] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
558[ 0.730577] ahci 0000:00:1f.2: setting latency timer to 64
559[ 0.730995] scsi0 : ahci
560[ 0.731077] scsi1 : ahci
561[ 0.731148] scsi2 : ahci
562[ 0.731217] scsi3 : ahci
563[ 0.731286] scsi4 : ahci
564[ 0.731351] scsi5 : ahci
565[ 0.731374] ata1: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635100 irq 45
566[ 0.731376] ata2: SATA max UDMA/133 abar m2048@0xe0635000 port 0xe0635180 irq 45
567[ 0.731377] ata3: DUMMY
568[ 0.731378] ata4: DUMMY
569[ 0.731379] ata5: DUMMY
570[ 0.731379] ata6: DUMMY
571[ 0.822580] usb 1-1: new high-speed USB device number 2 using ehci-pci
572[ 0.955384] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
573[ 0.955389] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
574[ 0.955715] hub 1-1:1.0: USB hub found
575[ 0.955881] hub 1-1:1.0: 6 ports detected
576[ 1.050829] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
577[ 1.051230] ata1.00: supports DRM functions and may not be fully accessible
578[ 1.051466] ata1.00: ATA-9: Crucial_CT960M500SSD1, MU02, max UDMA/133
579[ 1.051469] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
580[ 1.052422] ata1.00: supports DRM functions and may not be fully accessible
581[ 1.053251] ata1.00: configured for UDMA/133
582[ 1.053546] scsi 0:0:0:0: Direct-Access ATA Crucial_CT960M50 MU02 PQ: 0 ANSI: 5
583[ 1.066899] usb 2-1: new high-speed USB device number 2 using ehci-pci
584[ 1.199589] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
585[ 1.199595] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
586[ 1.200020] hub 2-1:1.0: USB hub found
587[ 1.200196] hub 2-1:1.0: 8 ports detected
588[ 1.271348] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
589[ 1.364711] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2020
590[ 1.364717] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
591[ 1.364720] usb 1-1.3: Product: Biometric Coprocessor
592[ 1.364722] usb 1-1.3: Manufacturer: Auth
593[ 1.367155] tsc: Refined TSC clocksource calibration: 2793.654 MHz
594[ 1.371207] ata2: SATA link down (SStatus 0 SControl 300)
595[ 1.386248] sd 0:0:0:0: [sda] 1875385008 512-byte logical blocks: (960 GB/894 GiB)
596[ 1.386253] sd 0:0:0:0: [sda] 4096-byte physical blocks
597[ 1.386406] sd 0:0:0:0: [sda] Write Protect is off
598[ 1.386409] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
599[ 1.386444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
600[ 1.388281] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
601[ 1.389261] sd 0:0:0:0: [sda] Attached SCSI disk
602[ 1.390914] sd 0:0:0:0: Attached scsi generic sg0 type 0
603[ 1.435337] usb 1-1.4: new full-speed USB device number 4 using ehci-pci
604[ 1.455969] device-mapper: uevent: version 1.0.3
605[ 1.456037] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
606[ 1.527326] raid6: sse2x1 7166 MB/s
607[ 1.531072] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e6
608[ 1.531075] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
609[ 1.531077] usb 1-1.4: Product: BCM20702A0
610[ 1.531078] usb 1-1.4: Manufacturer: Broadcom Corp
611[ 1.531080] usb 1-1.4: SerialNumber: 2016D8D6A3C7
612[ 1.595402] raid6: sse2x2 10683 MB/s
613[ 1.603539] usb 1-1.6: new high-speed USB device number 5 using ehci-pci
614[ 1.663493] raid6: sse2x4 13895 MB/s
615[ 1.663495] raid6: using algorithm sse2x4 (13895 MB/s)
616[ 1.663496] raid6: using ssse3x2 recovery algorithm
617[ 1.663719] xor: automatically using best checksumming function:
618[ 1.703159] usb 1-1.6: New USB device found, idVendor=5986, idProduct=02d2
619[ 1.703161] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
620[ 1.703162] usb 1-1.6: Product: Integrated Camera
621[ 1.703164] usb 1-1.6: Manufacturer: Ricoh Company Ltd.
622[ 1.703533] avx : 26887.000 MB/sec
623[ 1.705494] bio: create slab <bio-1> at 1
624[ 1.705642] Btrfs loaded
625[ 1.713362] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
626[ 1.714589] XFS (sda4): Mounting Filesystem
627[ 1.737835] XFS (sda4): Ending clean mount
628[ 1.775874] usb 2-1.4: new high-speed USB device number 3 using ehci-pci
629[ 1.879134] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205
630[ 1.879138] usb 2-1.4: New USB device strings: Mfr=4, Product=3, SerialNumber=0
631[ 1.879140] usb 2-1.4: Product: Qualcomm Gobi 2000
632[ 1.879141] usb 2-1.4: Manufacturer: Qualcomm Incorporated
633[ 1.883506] systemd-udevd[417]: starting version 204
634[ 1.952748] ACPI: Requesting acpi_cpufreq
635[ 1.955752] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0E:00/input/input1
636[ 1.955758] ACPI: Sleep Button [SLPB]
637[ 1.955831] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/PNP0C09:00/PNP0C0D:00/input/input2
638[ 1.955994] ACPI: Lid Switch [LID]
639[ 1.956040] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
640[ 1.956043] ACPI: Power Button [PWRF]
641[ 1.960717] mei_me 0000:00:16.0: setting latency timer to 64
642[ 1.960754] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
643[ 1.965073] [drm] Initialized drm 1.1.0 20060810
644[ 1.977201] Non-volatile memory driver v1.3
645[ 1.980096] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
646[ 1.985159] cfg80211: Calling CRDA to update world regulatory domain
647[ 1.986686] input: PC Speaker as /devices/platform/pcspkr/input/input4
648[ 1.988252] Intel(R) Wireless WiFi driver for Linux, in-tree:
649[ 1.988255] Copyright(c) 2003-2013 Intel Corporation
650[ 1.989251] udevd[577]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
651[ 1.996616] udevd[597]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
652[ 1.997361] ACPI: AC Adapter [AC] (on-line)
653[ 1.997856] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
654[ 1.998511] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
655[ 1.999280] udevd[605]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
656[ 2.001466] iwlwifi 0000:02:00.0: firmware: agent loaded iwlwifi-6000g2a-6.ucode into memory
657[ 2.001611] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
658[ 2.006926] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
659[ 2.007372] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
660[ 2.007430] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
661[ 2.007478] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
662[ 2.007531] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
663[ 2.007580] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
664[ 2.007623] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
665[ 2.007673] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
666[ 2.008359] ACPI Warning: 0x0000000000000528-0x000000000000052f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251)
667[ 2.008363] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
668[ 2.008366] ACPI Warning: 0x00000000000004b0-0x00000000000004bf SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
669[ 2.008368] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
670[ 2.008368] ACPI Warning: 0x0000000000000480-0x00000000000004af SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
671[ 2.008370] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
672[ 2.008371] lpc_ich: Resource conflict(s) found affecting gpio_ich
673[ 2.011209] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
674[ 2.011212] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
675[ 2.011214] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
676[ 2.011216] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
677[ 2.011302] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
678[ 2.020483] udevd[647]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
679[ 2.026775] udevd[660]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
680[ 2.028220] udevd[661]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
681[ 2.029996] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
682[ 2.030239] acpi device:07: registered as cooling_device4
683[ 2.030302] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
684[ 2.030306] thinkpad_acpi: ThinkPad ACPI Extras v0.24
685[ 2.030307] thinkpad_acpi: http://ibm-acpi.sf.net/
686[ 2.030309] thinkpad_acpi: ThinkPad BIOS CBET4000 coreboot, EC unknown
687[ 2.030310] thinkpad_acpi: Lenovo ThinkPad X230, model 2325TLU
688[ 2.030341] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input13
689[ 2.031440] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
690[ 2.031467] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
691[ 2.031469] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
692[ 2.036228] media: Linux media interface: v0.10
693[ 2.037131] usbcore: registered new interface driver usbserial
694[ 2.037143] usbcore: registered new interface driver usbserial_generic
695[ 2.037151] usbserial: USB Serial support registered for generic
696[ 2.038015] Linux video capture interface: v2.00
697[ 2.039013] ACPI: Battery Slot [BAT0] (battery present)
698[ 2.039094] usbcore: registered new interface driver qcserial
699[ 2.039105] usbserial: USB Serial support registered for Qualcomm USB modem
700[ 2.039125] ACPI: Battery Slot [BAT1] (battery absent)
701[ 2.039228] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
702[ 2.040287] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected
703[ 2.040964] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
704[ 2.041885] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:02d2)
705[ 2.042016] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0
706[ 2.042113] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input14
707[ 2.042188] [drm] Memory usable by graphics device = 2048M
708[ 2.042194] i915 0000:00:02.0: setting latency timer to 64
709[ 2.042507] usbcore: registered new interface driver cdc_wdm
710[ 2.043123] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected
711[ 2.050172] udevd[695]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
712[ 2.060420] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1
713[ 2.060459] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input15
714[ 2.060509] usbcore: registered new interface driver uvcvideo
715[ 2.060511] USB Video Class driver (1.1.1)
716[ 2.060881] udevd[716]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
717[ 2.061226] i915 0000:00:02.0: irq 49 for MSI/MSI-X
718[ 2.061234] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
719[ 2.061235] [drm] Driver supports precise vblank timestamp query.
720[ 2.061237] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected
721[ 2.061301] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
722[ 2.061312] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2
723[ 2.063893] udevd[719]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
724[ 2.064422] qmi_wwan 2-1.4:1.0: cdc-wdm0: USB WDM device
725[ 2.064547] qmi_wwan 2-1.4:1.0 wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.4, WWAN/QMI device, ae:1c:c7:97:fc:3b
726[ 2.064572] usbcore: registered new interface driver qmi_wwan
727[ 2.064815] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
728[ 2.066228] udevd[733]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
729[ 2.067337] Bluetooth: Core ver 2.16
730[ 2.067349] NET: Registered protocol family 31
731[ 2.067350] Bluetooth: HCI device and connection manager initialized
732[ 2.067357] Bluetooth: HCI socket layer initialized
733[ 2.067359] Bluetooth: L2CAP socket layer initialized
734[ 2.067363] Bluetooth: SCO socket layer initialized
735[ 2.088480] usbcore: registered new interface driver btusb
736[ 2.089909] udevd[787]: failed to execute '/lib/udev/socket:/org/xen/xend/udev_event' 'socket:/org/xen/xend/udev_event': No such file or directory
737[ 2.099244] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
738[ 2.099383] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
739[ 2.112265] iTCO_vendor_support: vendor-support=0
740[ 2.113351] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
741[ 2.113379] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
742[ 2.114582] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
743[ 2.120952] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
744[ 2.121185] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x17
745[ 2.121635] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
746[ 2.121738] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x17
747[ 2.121986] platform microcode: firmware: agent aborted loading intel-ucode/06-3a-09 (not found?)
748[ 2.122150] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
749[ 2.130479] cfg80211: World regulatory domain updated:
750[ 2.130482] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
751[ 2.130483] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
752[ 2.130484] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
753[ 2.130485] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
754[ 2.130486] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
755[ 2.130486] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
756[ 2.188202] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
757[ 2.205632] fbcon: inteldrmfb (fb0) is primary device
758[ 2.368615] Switched to clocksource tsc
759[ 2.870211] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x123800, board id: 1611, fw id: 1099905
760[ 2.870228] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
761[ 2.909589] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input16
762[ 3.000413] Console: switching to colour frame buffer device 170x48
763[ 3.003624] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
764[ 3.003626] i915 0000:00:02.0: registered panic notifier
765[ 3.003644] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
766[ 3.798444] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
767[ 5.780403] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
768[ 7.085614] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
769[ 7.285928] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input17
770[ 9.463111] bio: create slab <bio-2> at 2
771[ 9.530882] bio: create slab <bio-2> at 2
772[ 9.586054] loop: module loaded
773[ 9.593053] fuse init (API version 7.22)
774[ 9.693306] FAT-fs (sda3): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
775[ 9.696195] FAT-fs (sda3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
776[ 9.696716] XFS (dm-0): Mounting Filesystem
777[ 9.720269] XFS (dm-0): Ending clean mount
778[ 9.734118] FAT-fs (sda2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
779[ 9.734789] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
780[ 10.426632] Bluetooth: RFCOMM TTY layer initialized
781[ 10.426644] Bluetooth: RFCOMM socket layer initialized
782[ 10.426646] Bluetooth: RFCOMM ver 1.11
783[ 10.430669] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
784[ 10.430671] Bluetooth: BNEP filters: protocol multicast
785[ 10.430677] Bluetooth: BNEP socket layer initialized
786[ 10.991544] systemd-logind[3179]: New seat seat0.
787[ 10.992039] systemd-logind[3179]: Watching system buttons on /dev/input/event3 (Power Button)
788[ 10.992085] systemd-logind[3179]: Watching system buttons on /dev/input/event13 (Video Bus)
789[ 10.992123] systemd-logind[3179]: Watching system buttons on /dev/input/event2 (Lid Switch)
790[ 10.992161] systemd-logind[3179]: Watching system buttons on /dev/input/event1 (Sleep Button)
791[ 10.992197] systemd-logind[3179]: Watching system buttons on /dev/input/event14 (ThinkPad Extra Buttons)
792[ 10.992659] systemd-logind[3179]: New session 1 of user Debian-gdm.
793[ 10.992713] systemd-logind[3179]: Linked /tmp/.X11-unix/X0 to /run/user/114/X11-display.
794[ 11.092174] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
795[ 11.195352] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
796[ 11.195624] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
797[ 11.198424] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
798[ 11.205294] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
799[ 11.269550] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input18
800[ 11.471097] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
801[ 11.477983] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
802[ 11.552129] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
803[ 14.447419] iwlwifi 0000:02:00.0: Error sending REPLY_SCAN_ABORT_CMD: time out after 2000ms.
804[ 14.447425] iwlwifi 0000:02:00.0: Current CMD queue read_ptr 30 write_ptr 31
805[ 14.735114] iwlwifi 0000:02:00.0: HCMD_ACTIVE already clear for command REPLY_RXON
806[ 14.869499] iwlwifi 0000:02:00.0: L1 Disabled; Enabling L0S
807[ 14.876365] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
808[ 14.956205] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
809[ 15.076996] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
810[ 15.180390] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
811[ 15.180637] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
812[ 20.311588] systemd-logind[3179]: New session c1 of user phcoder.
813[ 21.505584] wlan0: authenticate with 00:24:37:96:06:b0
814[ 21.514325] wlan0: send auth to 00:24:37:96:06:b0 (try 1/3)
815[ 21.580932] wlan0: authenticated
816[ 21.581205] iwlwifi 0000:02:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
817[ 21.581210] iwlwifi 0000:02:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
818[ 21.584259] wlan0: associate with 00:24:37:96:06:b0 (try 1/3)
819[ 21.587091] wlan0: RX AssocResp from 00:24:37:96:06:b0 (capab=0x451 status=0 aid=1)
820[ 21.590203] wlan0: associated
821[ 21.590230] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready